CISCO-P2P-IF-MIB Download
The Point to Point Interface MIB module.
This MIB manages the generic objects for
Serial link or SONET/SDH like point to point network
interfaces with the encapsulations of PPP
(Point to Point Protocol), HDLC (High Level Data Link Control)
or cHDLC (CIsco extension to High Level Data Link Control)
framing.
IPHost Network Monitor offer an easy way of SNMP monitoring your Cisco Servers, Routers, Switches, Bridges,
Firewalls, Repeaters.
OID list for CISCO-P2P-IF-MIB
- cp2pIfCfgTable
- The Point to Point generic Configuration Table. It contains the standard configuration information of the Point to Point interface.
- cp2pIfCfgEntry
- An entry in the configuration table for each Point to Point interface. The entry is created when the Point to Point related interface is created in ifTable. The possible ifType of point to point interface are listed as follows: [1] ppp(23) [2] hdlc(118) [ ...
- cp2pIfCfgCrcMode
- Specifies the CRC mode for the FCS generation of a packet sending via the Point to point interface.
- cp2pIfCfgScramblingMode
- Specifies the scrambling encryption mode of the point to point interface.
- cp2pIfCfgTransmitDelay
- Specified the minimum delay after sending a packet via the point to point interface. The value of '0' indicates the transmit delay of packet is disabled.
- cp2pIfStatsTable
- The Point to Point Interface Statistics Table. It contains statistics information of a Point to Point interface including the error statistics.
- cp2pIfStatsEntry
- An entry in the statistics table for each Point to Point interface.
- cp2pIfStatsInCrcErrors
- Accumulated number of CRC errors that are detected on the received packets via the Point to Point interface since system startup.
- ciscoP2PIfMIBGeneralGroup
- The collection of objects providing general information about the Cisco Point to Point interfaces.
Download IPHost Network Monitor (500 monitors for 30 days, 50 monitors free forever) to start monitoring network devices right now.
