CISCO-PSD-CLIENT-MIB Download
This MIB module manages the client side
functionality of the Persistent Storage Device(PSD).
This MIB instrumentation is for configuring
data-store(PSD client) feature on GGSN and monitoring
the state of the PSD server(up/down/full).
The Cisco Persistent Storage Device(PSD) is an
extension to existing storage on the Cisco Content
Services Gateway(CSG).
The GGSN currently allows sending of the CDRs to an
active CG, while allowing up to two standby CG's to
be configured. When all the configured CG's become
unavailable, the CDRs get stored at the GGSN and
start using up GGSN resources such as memory. As the
amount of memory is limited on GGSN and failure of
GGSN shall lead to losing these stored CDRs.
Using PSD as temporary storage, shall avoid losses
due to these problems. When all the configured CG's
are unavailable, GGSN needs to backup the live closed
CDR's to a PSD. When any of the CG's shall become
available, GGSN shall retrieve the stored CDR's
automatically from the PSD and forwards them to the
active CG.
PSD supports the charging protocol(GTP'), version 0
with a few private extensions, which is used to
facilitate the required functionality via UDP.
IPHost Network Monitor offer an easy way of SNMP monitoring your Cisco Servers, Routers, Switches, Bridges,
Firewalls, Repeaters.
OID list for CISCO-PSD-CLIENT-MIB
- cPsdClientDSWriteReq
- The number of Data Record Transfer request (for write) messages sent to the PSD server. This counter is incremented when the FIFO write request is sent to the PSD server from the client.
- cPsdClientDSReadReq
- The number of Data Record Transfer request (for read) messages sent to PSD server. This counter is incremented when the FIFO read request message is sent to PSD server.
- cPsdClientDSRdWrRetrans
- The number of Data Record Transfer Request (retransmission) messages sent to the PSD server. The PSD does not differentiate between a retransmission and original request. So, this counter together with the above two counters cPsdClientDSReadReq/ cPsdClien ...
- cPsdClientDSDiskFullTrans
- The number of state transitions made by the PSD from state 'disk available' to 'disk full'. This counter is incremented when client receives the disk full indication from PSD server.
- cPsdClientNotifEnable
- This object specifies whether the agent should generate the notifications defined in this MIB module. If the value of this object is 'true' it enables the device to generate the notifications. If the value of this object is 'false' it disables the device ...
- cPsdClientDSTable
- A table consisting of entries for data-store(DS) and auto-retrieval configurations. In order to minimize the performance/memory impact on the PSD client, as well as not to overwhelm the CG with both live CDRs and retrieved CDRs, the maximum retrieval rate ...
- cPsdClientDSEntry
- Each entry contains the configuration for auto-retrieval and also maximum retrieval value if auto-retrieval is enabled.
- cPsdClientDSName
- This object contains the name of the configured data-store
- cPsdClientDSAutoRetrieve
- This object is used to enable/disable the CDR auto-retrieval functionality. If value of this object is set to 'true', auto-retrieval is enabled. If value of this object is set to 'false', auto-retrieval is disabled.
- cPsdClientDSMaxRetrieve
- This object used to specify the maximum retrieval value, when auto retrieve is enabled, i.e when the value of the corresponding instance of cPsdClientDSAutoRetrieve is set to 'true'.
- cPsdClientDSRowStatus
- The status of this conceptual row. This object is used to create a row or delete a existing row in a table.
- cPsdClientDSServerTable
- The table contains the list of the PSD servers used to write/retrieve the CDRs.
- cPsdClientDSServerEntry
- This entry contains a description of the PSD server.
- cPsdClientDSServerAddressType
- This object indicates the type of Internet address of the PSD server.
- cPsdClientDSServerAddress
- The object specifies the Internet address of the PSD server. The type of address of an instance of this object is determined by the value of the corresponding instance of cPsdClientDSServerAddressType.
- cPsdClientDSRetrieveOnly
- The object represents that, the PSD server can be configured either as write/retrievable or as retrievable only. If the value of this object is set to 'true', the PSD server (the value of the corresponding instance of cPsdClientDSServerAddress) shall not ...
- cPsdClientDSServerRowStatus
- The status of this conceptual row. This object will create a row or delete a existing row in a table.
- cPsdClientNotifDSServerAddrType
- This object indicates the type of Internet address of the Data-Store server.
- cPsdClientNotifDSServerAddress
- This object specifies the Internet address of the Data-Store server . The type of address of an instance of this object is determined by the value of cPsdClientNotifDSServerAddrType.
- cPsdClientMIBStatisticsGroup
- A collection of objects providing Data Store related statistics.
- cPsdClientMIBConfigurationsGroup
- A collection of objects providing Data Store related configurations.
- cPsdClientMIBNotifInfoGroup
- A collection of notification info objects on PSD.
- cPsdClientMIBNotifMgmtGroup
- A collection of objects related with notification management on PSD.
Download IPHost Network Monitor (500 monitors for 30 days, 50 monitors free forever) to start monitoring network devices right now.
