CISCO-REPEATER-MIB Download

ciscoRptrPortTable

Table of descriptive and status information about the ports.

ciscoRptrPortEntry

An entry in the table, containing information about a single port.

ciscoRptrPortMDIStatus

This object indicates the port's MDI/MDI-X switching status. The normal(1) status indicates the port is configured to be standard MDI as defined by the 10BaseT Standard for hub port (allowing for connection to a chained hub). The crossover(2) status indi ...

ciscoRptrPortLinkTestEnabled

Specifies whether or not Link Integrity Test Function is enabled for the port as specified by the 10BaseT Standard. When the link test function is enabled, the absence of the Link Test pulses and receive data on the port will cause the port to go into a L ...

ciscoRptrPortLinkTestFailed

This object indicates the status of the Link Test function for the port. Set to false indicates valid data or 4 consecutive Link Test pulses have been detected on the port. Set to true indicates the failure of the Link Test function for the port. In th ...

ciscoRptrPortAutoPolarityEnabled

Specifies whether or not the Automatic Receiver Polarity Reversal is enabled for the port. This feature provides the ability to invert the polarity of the signals appearing at the RXD+/- pair of the port prior to re-transmission if the polarity of the re ...

ciscoRptrPortAutoPolarityCorrected

This object indicates the status of the Automatic Receiver Polarity Reversal for the port. Set to true indicates the polarity of the port has been detected as reversed and is corrected. Set to false indicates the polarity for the port as having correct ...

ciscoRptrPortSrcAddrCtrl

Specifies whether or not the Source Address Control feature is enabled for the port. This feature provides the ability to control which device's specific MAC address is allowed access to the network. If the management entity specified an address via cis ...

ciscoRptrPortAllowedSrcAddr

For write access, this object is the allowed source address that is to be configured for source address control feature for the port. For read access, if no allowed source address was specifically specified by the manager, the agent shall return the learn ...

ciscoRptrPortAllowedSrcAddrStatus

This object indicates the status of ciscoRptrPortAllowedSrcAddr for the port. allowedSrcAddrConfig(1) status indicates that the allowed source address was explicitly configured by management entity. The allowedSrcAddrLearn(2) status indicates that the a ...

ciscoRptrPortLastIllegalSrcAddr

This object is the last illegal source address which caused this port to be partitioned. If the port is never partitioned due to Source Address Control, the agent shall return a string of length zero.

ciscoRptrPortIllegalAddrTrapAcked

Specifies whether an acknowledgment is sent by an NMS to indicate that an illegal source address trap was received. acked : Set by a NMS to acknowledge reception of an illegal source address. When this flag is set, no more trap will be sent for the port. ...

ciscoRptrPortIllegalAddrTrapEnabled

Specifies whether or not to send the illegal source address trap for the port. When it is enabled, one or more illegal source address traps will be generated if there is a mismatch of source address. Traps are sent based on the algorithm specified by cis ...

ciscoRptrPortIllegalAddrFirstHeard

This is the time stamp for the very first time when the current illegal source address was detected on the port. The time stamp is given by the value of MIB-II's sysUpTime at which this occurrence happens. If no illegal source address is heard on the po ...

ciscoRptrPortIllegalAddrLastHeard

This is the time stamp for the last time when the current illegal source address was detected on the port. The time stamp is given by the value of MIB-II's sysUpTime at which occurrence happens. If no illegal source address was never occurred, this valu ...

ciscoRptrPortLastIllegalAddrCount

This is the count of consecutive occurrences of the last illegal source address on the port. When illegal address is detected, this count will be incremented about every minute.

ciscoRptrPortIllegalAddrTotalCount

This is the total count of all cccurences of any illegal source addresses heard on the port since start-up. Note: Illegal source addresses may be different, may be the same. This counter is a *total* count from this port.

ciscoRptrTrapAlgorithm

Specifies how often trap(s) will be sent by the SNMP agent. once - The trap is only sent once. decay - The same trap is sent multiple times at approximately exponential decaying rate. e.g. 1st trap is sent immediately, 2nd trap is at 1 minute, 3rd trap ...

ciscoRptrMIBGroup

A collection of objects providing repeater ability.

ciscoRptrMIBPortGroupV11R01

A collection of objects for managing a repeater port.

ciscoRptrMIBGlobalsGroup

A collection of objects apply to all repeater ports.