CISCO-SANTAP-MIB

CISCO-SANTAP-MIB Download

MIBs list

MIB module to provide information about the SanTap service configuration. SanTap is a fibre channel switch based capability that provides a reliable copy of the data flowing between a set of one or more initiators and a set of one or more targets connected to the fabric. Adminstrator must configure the switch to create the Control Virtual Target (CVT) for the SanTap service. CVTs are used to implement the control path which process all SanTap service requests sent out by an appliance. Prior to requesting for SanTap service the appliance contacts the CVT, specifies the initiator and the target for replicating the data flowing between them. This MIB provides an interface to configure the CVT for the SanTap service on the fibre channel switch modules.

IPHost Network Monitor offer an easy way of SNMP monitoring your Cisco Servers, Routers, Switches, Bridges, Firewalls, Repeaters.

OID list for CISCO-SANTAP-MIB

cstModuleTable
A table listing the modules on which SanTap service can be configured and CVT can be created by the user. The entry in the cstServiceConfigTable can only be created on a module present in the cstModuleTable.
cstModuleEntry
An entry in this table. The cstModuleId denotes the entPhysicalIndex of the module on which SanTap service can be configured.
cstModuleId
This object specifies the physical index of the entity with entPhysicalClass as 'module' on which SanTap service can be configured by the user. This is same as the entPhysicalIndex of the module.
cstServiceConfigTable
This table provides information about the list of all CVTs created and configured in the system. A new entry creation in this table, creates a CVT on the module specified by the corresponding instance index 'cstModuleId' and configures the CVT on the VSAN ...
cstServiceConfigEntry
An entry containing information about a CVT configuration for the SanTap service. The 'cstModuleId' denotes the module on which the user wants the SanTap service to be configured and the CVT to be created. The index 'vsanIndex' represents the VSAN on whic ...
cstCVTNodeWwn
This object represents the Node World-Wide Name of the CVT created on the module represented by the corresponding entity index 'cstModuleId'.
cstCVTPortWwn
This object represents the Port World-Wide Name of the CVT created on the module represented by the corresponding entity index 'cstModuleId'.
cstServiceConfigRowStatus
The status of this conceptual row.
cstCVTName
The administratively assigned name for this CVT.
cstDVTConfigTable
This table provides information about the list of all DVTs created and configured in the system. A new entry creation in this table, creates a DVT corresponding to the target PWWN 'cstDVTPortWwn' on the VSAN 'vsanIndex'. Deleting an entry from this table, ...
cstDVTConfigEntry
An entry containing information about a DVT configuration for the SanTap service.
cstDVTPortWwn
This object represents the port world-wide name of the created DVT. It will be the same as the port world-wide name of the real target for which data is to be replicated.
cstDVTTargetVsan
This object represents the VSAN of the real target for which this DVT is being created. This object MUST be set to a valid value concurrently with setting the corresponding instance of cstDVTRowStatus to 'active'. This object cannot be modified while the ...
cstDVTPort
This object represents the port on the module where the DVT will be created. This object MUST be set to a valid value concurrently with setting the corresponding instance of cstDVTRowStatus to 'active'. This object cannot be modified while the value of th ...
cstDVTName
The administratively assigned name for this DVT.
cstDVTRowStatus
The status of this conceptual row.
cstDVTLunSizeHandling
This object indicates if the DVT should use the real target LUN size for the virtual LUN or the max LUN size supported which is 2TB. A value of false for this object indicates the real target LUN size should be used. This object should be set during the D ...
cstDVTIOTimeout
This object represents the IO timeout value associated with the DVT. This object should be set during the DVT creation time and cannot be modified later.
ciscoSanTapServiceConfigGroup
A Collection of objects to configure the CVT for SanTap service.
ciscoSanTapServiceConfigGroupRev1
A Collection of objects to configure the CVT for SanTap service.
ciscoSanTapDVTConfigGroup
A Collection of objects to configure the DVT for SanTap service.
ciscoSanTapDVTConfigGroup1
A Collection of objects to configure the DVT for SanTap service.

Download IPHost Network Monitor (500 monitors for 30 days, 50 monitors free forever) to start monitoring network devices right now.

MIBs list