CISCO-SYSTEM-MIB Download

csyClockDateAndTime

The current local date and time for the system. Setting this object is equivalent to setting an automated clock and calendar. The value of the object will track the date and time from the value set. Note that due to hardware limitations some systems may ...

csyClockLostOnReboot

Indication of whether the system can preserve knowledge of current date and time across a system reboot. A value of 'true' indicates the clock must be reset from some external source each time the system reboots. A value of 'false' indicates the system ha ...

csyLocationCountry

The country where the system is physically located. On some systems and for some technologies this value affects behavior, such as standards for communication. All such technologies should default to using the setting of this value, but may provide an ov ...

csySummerTimeStatus

An indication of whether the summertime feature is enabled on this device. When this object is set to true, then csySummerTimeOffset, csySummerTimeRecurringStart and csySummerTimeRecurringEnd objects are set to default values provided by the system. When ...

csySummerTimeOffset

The value of this object indicates number of minutes to add or to subtract during summertime. This object is not instantiated when csySummerTimeStatus object is set to false.

csySummerTimeRecurringStart

Indicates summertime starts at this time every year. octets contents range 1 week 1..5,ff last = ff 2-3 day 1..7 where sunday = 1 saturday = 7 4 month 1..12 where january = 1 december = 12 5 hour ...

csySummerTimeRecurringEnd

Indicates summertime ends at this time every year. octets contents range 1 week 1..5,ff where ff = last 2-3 day 1..7 where sunday = 1 saturday = 7 4 month 1..12 where january = 1 december = 12 5 h ...

csyStandardTmZnGMTOffset

This object is used to set standard timezone offset from GMT in minutes.

csySummerTmZnGMTOffset

This object is used to set summer timezone offset from GMT in minutes.

csyScheduledResetTime

The scheduled date and time the switch will be reset at. The system will only take octet strings with length 8 for this object which indicates the local time of the switch. The maximum scheduled time is 24 days from the current system clock time. Setting ...

csyScheduledResetAction

Writing reset(1) to this object perform the normal reset operation on the active supervisor module. Writing resetMinDown(2) to this object resets the system with the minimal system down time at the scheduled time. The resetMinDown(2) is only supported in ...

csyScheduledResetReason

Indicates the reason users input when issuing system's scheduled reset. After the system is reset, this object value will be empty octet string.

csySnmpAuthFail

The total number of SNMP messages received by the SNMP engine that were not properly authenticated.

csySnmpAuthFailAddressType

The type of Internet address by which the last received SNMP message that is not properly authenticated. The value of this object is irrelevant if the value of csySnmpAuthFail is zero.

csySnmpAuthFailAddress

The internet address of the SNMP entity which sent the last received SNMP message that is not properly authenticated. The value of this object is irrelevant if the value of csySnmpAuthFail is zero.

csyNotificationsEnable

This object indicates whether the system produces the notifications defined by the ciscoSystemNotificationsGroup. A false value will prevent notifications from being generated by this system.

ciscoSystemClockGroup

Clock attributes.

ciscoSystemLocationGroup

Physical location attributes.

ciscoSystemSummerTimeGroup

A collection of objects used to set Summertime. Implementation of this group is optional. If the generic Summertime feature is supported, the entire group should be implemented.

ciscoSystemScheduledResetGroup

A collection of objects used to set scheduled reset time. Implementation of this group is optional. If the system scheduled reset feature is supported, the entire group should be implemented.

ciscoSystemSnmpAuthGroup

A collection of objects which provide information about SNMP message that is not properly authenticated.

ciscoSystemGeneralGroup

A collection of objects which provide information about general configuration within this MIB module.

ciscoSystemSummerTimeGroupRev1

A collection of objects used to set Summertime. Implementation of this group is optional. If the generic Summertime feature is supported, the entire group should be implemented.