CISCO-UDLDP-MIB Download
Cisco Uni Direction Link Detection Protocol
MIB
IPHost Network Monitor offer an easy way of SNMP monitoring your Cisco Servers, Routers, Switches, Bridges,
Firewalls, Repeaters.
OID list for CISCO-UDLDP-MIB
- cudldpGlobalEnable
- This variable is used to enable(true)/disable(false) Uni Direction Link Detection Protocol on the device. cudldpGlobalEnable is deprecated and replaced with cudldpGlobalMode.
- cudldpHelloInterval
- Indicates interval in seconds at which each port sends a hello packet to all of its neighbors at steady state when the link has been identified as bidirectional. For platforms which support cudldpHelloIntervalExt, when cudldpHelloIntervalExt reports a val ...
- cudldpGlobalMode
- Indicates the mode of UDLDP feature on the device. enable -- Uni Direction Link Detection Protocol is enabled on the device. disable -- Uni Directional Link Detection Protocol is disabled on the device. aggresive -- Uni Directional Link Detection protocol ...
- cudldpHelloIntervalExt
- Indicates interval in seconds at which each port sends a hello packet to all of its neighbors at steady state when the link has been identified as bidirectional.
- cudldpFastHelloLinkFailRptNotifEnable
- This object specifies whether cudldpFastHelloLinkFailRptNotification is generated by the system. Setting this object value to 'true' will enable generation of cudldpFastHelloLinkFailRptNotification. Seting this object value to 'false' will disable generat ...
- cudldpFastHelloStatusChangeNotifEnable
- This object specifies whether cudldpFastHelloStatusChangeNotification is generated by the system. Setting this object value to 'true' will enable generation of cudldpFastHelloStatusChangeNotification. Seting this object value to 'false' will disable gener ...
- cudldpInterfaceTable
- The (conceptual) table containing the status of UDLDP on the device's interfaces.
- cudldpInterfaceEntry
- A conceptual row of cudldpInterfaceTable. An entry exists for each interface that supports UDLDP.
- cudldpInterfaceEnable
- This variable is used to enable UDLDP on this interface. If cudldpGlobalEnable is set to 'false' then this variable has no effect. cudldpInterfaceEnable is deprecated and replaced with cudldpInterfaceAdminMode.
- cudldpInterfaceOperStatus
- This mib object contains the following values, which has the meaning as: 'shutdown' - An Uni-Direction link has been detected and the port has been disabled. 'indeterminant' - Uni-Direction Link Detection protocol has not collected enough informati ...
- cudldpInterfaceAggressiveMode
- An indication of whether the UDLDP aggressive mode is enabled on this interface. If the aggressive mode is set to 'true', an active port may be shutdown in case of the abrupt loss of its neighbor(s) because the loss of communication (heartbeat) with the n ...
- cudldpInterfaceAdminMode
- Indicates the Administrative mode of Uni Direction Link Detection Protocol Feature configured on this interface. enable -- Uni Direction Link Detection Protocol is enabled on this interface. disable -- Uni Direction Link Detection Protocol is disabled on ...
- cudldpInterfaceOperMode
- Indicates the operational mode of Uni Direction Link Detection Protocol Feature on this interface.
- cudldpIfFastHelloInterval
- This object specifies the fast hello interval at which each port sends a hello packet to all of its neighbors at steady state. By setting this object to a positive value, this interface is enabled to send UDLD hello packet at a fast interval as specified ...
- cudldpIfOperHelloInterval
- This object indicates the operational interval value at which each port sends a hello packet to all of its neighbors at steady state.
- cudldpIfFastHelloOperStatus
- This object indicates the operational status of fast hello UDLD at this interface.
- cudldpFastHelloErrorReportEnable
- This object specifies whether error reporting is enabled or disabled when a fast hello UDLD link error is detected. 'true' specifies that when a fast hello UDLD link error is detected, the link remains in its current state and a cudldpFastHelloLinkFailRpt ...
- cudldpFastHelloMaxPorts
- This object indicates the maximum number of interfaces that fast hello UDLD can be enabled to run. When the value of cudldpFastHelloConfigPorts reaches this object value, enabling of fast hello UDLDP on additional interface will fail.
- cudldpFastHelloConfigPorts
- This object indicates the total number of interfaces that fast hello UDLD is currently enabled.
- cudldpFastHelloOperationalPorts
- This object indicates the number of interfaces that fast hello UDLD is currently enabled and in operational state.
- ciscoUdldpMIBGroup
- A collection of objects for use with the Uni Direction Link Detection Protocol.
- ciscoUdldpAggreModeOptionalGroup
- A collection of optional objects providing UDLDP aggressive mode configuration information.
- ciscoUdldpMIBGroup2
- A collection of objects providing Uni Direction Link Detection Protocol information.
- ciscoUdldpMIBGroup3
- A collection of objects providing Uni Direction Link Detection Protocol information.
- ciscoUdldpFastHelloGroup
- A collection of objects which provides fast hello UDLD information in the device.
Download IPHost Network Monitor (500 monitors for 30 days, 50 monitors free forever) to start monitoring network devices right now.
