CISCO-VISM-CONN-STAT-MIB Download
The MIB module contain VISM channel
counters information.
IPHost Network Monitor offer an easy way of SNMP monitoring your Cisco Servers, Routers, Switches, Bridges,
Firewalls, Repeaters.
OID list for CISCO-VISM-CONN-STAT-MIB
- vismChanCntGrpTable
- vismChanCntGrpTable contains VISM channels counters. ::= { vismChanCntGrp 1 } SYNTAX VismChanCntGrpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION An entry for each voice channel. INDEX { vismCntChanNum } ::= { vismChanCntGrpTable ...
- vismChanCurrentXmtCellRate
- This object counts the current transmit cell rate (cells per second) for the channel.
- vismChan24HrPeakRcvCellRate
- This object counts the peak receive cell rate (cells per second) for the channel since midnight with reference to node time; the peak cell rate counter gets reset to 0 every 24 hours at midnight. If the node time is changed, the counter will continue to g ...
- vismChanCurrentRcvCellRate
- This object counts the current receive cell rate (cells per second) for the channel.
- vismChanAisSuppressCount
- This object holds the number of times that ATM network alarms were successfully suppressed and prevented from propagating onto the TDM side for this PVC.
- vismChanXmtAisCnts
- The number of instances that an ATM AIS alarm was transmitted.
- vismChanRcvAisCnts
- The number of instances that an ATM AIS alarm was received.
- vismChanXmtFerfCnts
- The number of instances that an ATM FERF alarm was transmitted.
- vismChanRcvFerfCnts
- The number of instances that an ATM FERF alarm was received.
- vismChanAal5PduSentPkts
- This object counts the number of AAL5 PDUs transmitted to the network. This is only applicable to the PVCs configured as AAL5 PVCs, VoIP (Voice Over IP) PVCs or CCS (Common Channel Signaling) PVCs in the case of VoAAL2 applications.
- vismChanAal5PduRcvdPkts
- This object counts the number of AAL5 PDUs received from the network. This is only applicable to the PVCs configured as AAL5 PVCs, VoIP (Voice Over IP) PVCs or CCS (Common Channel Signaling) PVCs in the case of VoAAL2 applications.
- vismChanAisDelayLeft
- The real-time number of seconds remaining for the AIS delay timer after which the ATM alarm will be propagated to the TDM side. This object is tied to the vismChanAisDelayTime object in the CISCO-VISM-CONN-MIB. vismChanAisDelayTime will store the configur ...
- vismChanOamLpbkTimeoutCnts
- The number of instances that OAM loopback timeout alarm has occurred since the system was last re-initialized.
- vismChanOamLpbkTimeoutDuration
- The total duration of OAM loopback timeout alarms since the system was last re-initialized.
- ciscoVismConnStatGroup
- The collection of objects which are used to represent VISM channel counter group.
- ciscoVismConnStatGroup1
- The collection of objects which are used to represent VISM channel counter group.
- ciscoVismConnStatGroup2
- The collection of objects which are used to represent VISM channel counter group.
- ciscoVismConnStatGroup3
- The collection of objects which are used to represent VISM channel counter group.
Download IPHost Network Monitor (500 monitors for 30 days, 50 monitors free forever) to start monitoring network devices right now.
