CISCO-VSAN-MIB

CISCO-VSAN-MIB Download

MIBs list

The MIB module for the management of the Virtual Storage Networks (VSANs) within the frame work of Cisco's VSAN Architecture. This MIB enables the users to configure and monitor VSAN parameters.

IPHost Network Monitor offer an easy way of SNMP monitoring your Cisco Servers, Routers, Switches, Bridges, Firewalls, Repeaters.

OID list for CISCO-VSAN-MIB

vsanFcFeElementName
This object is part of vsanPortMembershipChange notification. It is the Switch World-Wide Name (WWN) of the switch which is generating this notification.
vsanNumber
The number of VSANs configured on this device.
vsanLastChange
The value of sysUpTime at the time of the last creation, deletion or modification of an entry in the vsanTable and the vsanIfTable, where modification is a change in the value of any object instance within the table.
vsanTable
This table lists all the VSAN configured on this device. This table allows users to create, delete and manage the VSANs on local device.
vsanEntry
An entry (conceptual row) in the vsanTable. This contains information about a VSAN.
vsanIndex
The ID of the VSAN.
vsanName
The name of the VSAN. Note that default value of this object will be the string 'VSANxxxx' where xxxx is value of vsanIndex expressed as 4 digits. For example, if vsanIndex is 23, the default value of this object is 'VSAN0023'.
vsanMediaType
The network media type on which this VSAN is defined.
vsanAdminState
Represents the configurable state of this VSAN. The value 'active' for this object represents the VSAN is configured and services for the VSAN is activated. The value 'suspended' for this object represents the VSAN is configured but services for the VSAN ...
vsanMtu
The MTU of the VSAN. Normally, this object is 2112 for all VSANs for which object vsanMediaType has the value 'fibreChannel'.
vsanLoadBalancingType
The type of load balancing used on this VSAN.
vsanInterOperMode
The interoperability mode of the local switch on this VSAN. This object indicates if this device can inter-operate with devices from other vendors on this VSAN.
vsanOperState
The operational state of the VSAN. Indicates whether traffic can pass thru this VSAN.
vsanRowStatus
The status of this conceptual row.
vsanInterOperValue
This object is used for configuring the interoperability value of the VSAN, to inter-operate with different vendor devices. If the value of this object is 0, then the interoperability is disabled. If the value of this object is 1, then the VSAN can inter- ...
vsanInorderDelivery
The InorderDelivery guarantee flag for the local switch on this VSAN. If the value of the object is 'true', then the in-order delivery is guaranteed. If 'false', it is not guaranteed. When the value of fcInorderDelivery is changed, the value of this objec ...
vsanNetworkDropLatency
Network latency of this switch on this VSAN. This is the time interval after which the frames are dropped if they are not delivered in the order they were transmitted. Note that vsanNetworkLatency is always greater than fcSwitchLatency. When the value of ...
notifyVsanIndex
The ID of the VSAN. This object is to be used only as an object in the notification. We cannot use the vsanIndex in a notification as it is defined to not-accessible in the vsanTable.
vsanDenyUnknownWwn
On a Fibre Channel fabric, an N_port is required to issue an Fabric Login (FLOGI) in order to login to the fabric. The FLOGI contains port's Port World Wide Name (WWN). By default, if this object is false and if a Port WWN is not present in the VSAN WWN d ...
vsanWwnListNumber
The number of WWNs configured both for static and dynamic membership purposes on this device. This is number of rows in the vsanWwnListTable.
vsanWwnListTable
A table of Port WWN lists. vsanIfTable and vsanDynamicTable use these Port WWN lists for the static and dynamic configuration of Port WWNs. In static case, this list serves as a list of Port WWNs that are denied on a interface, whereas in the dynamic case ...
vsanWwnListEntry
This entry contains a Port WWN indexed by a list index and Port WWN index. So each entry is a member of Port WWN list. A list consists of all the entries with the same value of vsanWwnListIndex.
vsanWwnListIndex
This is an index to a Port WWN list.
vsanWwnListWwnIndex
This is an index to a Port WWN within a Port WWN list.
vsanWwnListWwn
The Port WWN associated with this entry.
vsanWwnListRowStatus
The status of this conceptual row. Users can create, and delete the Port WWN entry.
vsanIfNumber
The number of rows in the vsanIfTable.
vsanIfTable
A table containing VSAN-related information for interfaces. This table gives a list of interface that are statically assigned to different VSANs. In addition, it also gives the list of Port WWNs that are denied on a particular interface. Here is a example ...
vsanIfEntry
This contains information on the static membership of a interface and the list of Port WWNs that are denied fabric login on that interface. The table contains membership information only for E_port and Fx_ports.
vsanIfVsan
Index of the VSAN to which this interface is statically assigned.
vsanIfDenyList
Index of the Port WWN list in the vsanWwnListTable. This is the list of Port WWNs which are denied the login when the Nx_ports try to login to the fabric on this interface. The value of this object is 0, if and only if there is no list to be denied on thi ...
vsanDynamicListNumber
The number of WWN lists configured for dynamic membership. This is the number of rows in the vsanDynamicTable.
vsanDynamicTable
The global database of Port WWN list to VSAN mappings which are used to determining dynamic membership of VSANs. If the port WWN in the login request is present in the database, then it is allowed login to the fabric. Following is an example for this tabl ...
vsanDynamicEntry
A row containing VSAN information, which is dynamically applied, based on a particular list of Port WWNs.
vsanDynamicVsan
The VSAN associated with this Port WWN list. If a Nx_port tries to login into the fabric with a Port WWN contained in this list, then the interface connected to that port is assigned to this VSAN.
vsanDynamicRowStatus
The status of this conceptual row. Users can create, and delete a Port WWN to VSAN mapping entry.
vsanMembershipSummaryTable
The VSAN membership summary table. vsanIfTable provides static VSAN membership of each of the interfaces whereas cdpvmDynPortsTable provides dynamic VSAN membership. This table lists all interfaces which are statically or dynamically assigned to VSANs on ...
vsanMembershipSummaryEntry
A row in the vsanMembershipSummaryTable. Each row identifies one interface such that the identified interface is one of the potentially many interfaces which are members of a particular VSAN.
vsanMembershipSummaryInterface
The ifIndex of the interface which is a member of this VSAN.
vsanMembershipSummaryIntfType
Indicate how this interface (represented by vsanMembershipSummaryInterface) was assigned to this VSAN.
fcTimerRatov
The Resource_Allocation_Timeout Value used for FxPorts as the timeout value for determining when to reuse an NxPort resource such as a Recovery_Qualifier. It represents E_D_TOV (fcTimerEdtov) plus twice the maximum time that a frame may be delayed within ...
fcTimerEdtov
The Error_Detect_Timeout Value used for FxPorts as the timeout value for detecting an error condition. Note that all switches in a fabric should be configured with the same value of this timeout. Note that value of this object must be less than value of f ...
fcTimerFstov
The Fabric_Stability_Timeout Value used to ensure that Fabric stability has been achieved during Fabric Configuration.
fcTimerDstov
The Distributed_Services_Timeout Value which indicates how long a distributed services requester will wait for a response.
fcNetworkDropLatency
Network latency of this switch. This is the time interval after which the frames are dropped if they are not delivered in the order they were transmitted. Note that fcNetworkLatency is always greater than fcSwitchLatency.
fcSwitchDropLatency
The switch latency of this switch. This is the time interval after which a switch drops the undelivered frames on a link which went down after delivering some frames to the next hop. This way the undelivered frames can be transmitted on a new link if ther ...
fcInorderDelivery
The InorderDelivery guarantee flag of device. If the value of the object is 'true', then the in-order delivery is guaranteed. If 'false', it is not guaranteed.
vsanFcTimerTable
This table allows the different FC timer values to be configured per VSAN basis. To set a particular type of 'FC Timeout Value', the VSAN should be in 'suspended' administrative state.
vsanFcTimerEntry
This object contains information about the FC timer values (dstov / edtov / ratov / fstov) configured for a VSAN. Whenever a global FC timer value (fcTimerRatov / fcTimerEdtov / fcTimerDstov / fcTimerFstov) is configured then the corresponding FC timer va ...
vsanFcTimerForceFlag
This object contains one bit for each of the FC timer value objects in this same table. The value of each bit governs the agent's behavior when the corresponding FC timer-value object is modified for a VSAN when that VSAN's administrative state is 'active ...
vsanFcTimerRatov
The Resource_Allocation_Timeout Value used for FxPorts as the timeout value for determining when to reuse an NxPort resource such as a Recovery_Qualifier. It represents E_D_TOV (vsanFcTimerEdtov) plus twice the maximum time that a frame may be delayed wit ...
vsanFcTimerEdtov
The Error_Detect_Timeout Value used for FxPorts as the timeout value for detecting an error condition. Note that all switches in a VSAN should be configured with the same value of this timeout. Note that value of this object must be less than value of vsa ...
vsanFcTimerDstov
The Distributed_Services_Timeout Value which indicates how long a distributed services requester will wait for a response. If the corresponding VSAN administrative state is 'active', then the 'SET' operation on this object results in error. However to for ...
vsanFcTimerFstov
The Fabric_Stability_Timeout Value used to ensure that Fabric stability has been achieved during Fabric Configuration. The value of this object is common across all VSANs.
vsanGroup
A collection of objects for configuring and displaying information on VSANs.
vsanMembershipGroup
A collection of objects for controlling VSAN membership.
vsanStaticMembershipGroup
A collection of objects for displaying and configuring VSAN static membership.
vsanWWNListGroup
A collection of objects for creating WWN lists and adding Port WWNs into Port WWN list.
vsanDynamicMembershipGroup
A collection of objects for dynamic VSAN configuration.
vsanFcTimerGroup
A collection of objects for configuring and monitoring Fibre Channel timers.
vsanFcLatencyGroup
A collection of objects for configuring and monitoring Fibre Channel latencies.
vsanVsanMembershipSummaryGroup
A collection of objects for VSAN membership summary.
vsanGroupRev1
A collection of objects for configuring and displaying information on VSANs.
vsanFcTimerGroupRev1
A collection of objects for configuring and monitoring global FC timers and per VSAN based FC timers.
vsanGroupRev2
A collection of objects for configuring and displaying information on VSANs.
vsanMembershipSummaryGroupRev1
A collection of objects for VSAN membership interface type.
vsanGroupRev3
A collection of objects for configuring and displaying information on VSANs.

Download IPHost Network Monitor (500 monitors for 30 days, 50 monitors free forever) to start monitoring network devices right now.

MIBs list