CISCO-WAN-ATM-CUG-MIB Download

MIBs list

This MIB module is intended for the management of 'Closed User Group(CUG)' in Cisco ATM switches. This MIB definition is based upon 'Closed User Group' recommended by International Telecommunication Union(ITU). The CUG supplementary service enables users to form groups, to and from which access is restricted. A specific user may be member of one or more closed user groups. Members of a specific closed user group can communicate among themselves but not, in general, with users outside the group. Specific CUG members can have additional capabilities that allow them to originate calls to destinations outside the group, and/or to receive calls from outside the group. Specific CUG members can have additional restrictions that prevent them from originating calls to other members of the CUG, or from receiving calls from other members of the CUG. ITU-T Q.2955.1 Stage 3 description for community of interest supplementary services using B-ISDN Digital Subscriber Signalling System No.2(DSS 2): Closed User Group(CUG).

IPHost Network Monitor offer an easy way of SNMP monitoring your Cisco Servers, Routers, Switches, Bridges, Firewalls, Repeaters.

OID list for CISCO-WAN-ATM-CUG-MIB

cwaCugTable: This table contains a sequence of CUGs for each ATM address.
cwaCugEntry: The entry represents one CUG for an ATM address.
cwaAtmAddress: A provisioned ATM address on the managed system.
cwaAddressLength: This is the length (in bits) of the 'cwtAtmAddress'. ::= { cwaCugEntry 2 } SYNTAX Integer32(1..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION The CUG index is a parameter used by the calling user to select a particular CUG when origin ...
cwaAddressPlan: This is the type of the ATM address associated with this entry.
cwaInterlockCode: This is the 'Closed User Group(CUG) Interlock Code' associated with this entry.
cwaCallsBarred: This variable indicates if this member can receive calls from or make calls to other members of the same CUG. When this variable is set to none(1), it means this CUG member can receive calls from and make calls to other members in the same CUG. When this ...
cwaCugRowStatus: The row status of each entry in this table. Once the 'cwaInterlockCode' is created, it cannot be modified. If the management station wants to assign a different Interlock Code to the same 'cwaCugIndex', the management station must remove the current entry ...
cwaAddressCugTable: A table of CUG parameters associated with each provisioned ATM address.
cwaAddressCugEntry: The managed system will automatically create an entry in this table when the first CUG is created for the same ATM address in 'cwaCugTable'. A entry in this table is automatically destroyed by the managed system when all CUGs of the same ATM address are d ...
cwaCugAtmAddressPlan: This is the type of the ATM address associated with this entry.
cwaIncomingAccess: This variable decides whether 'incoming access' is allowed for a CUG user. the 'incoming access' allows a CUG user to receive calls from all other non-CUG users and also from those other CUG user that allow 'outgoing access'. When the value is set to notA ...
cwaOutgoingAccess: This variable decides whether 'outgoing access' is allowed for a CUG user. The 'outgoing access' allows a member of a CUG to make calls to other non-CUG members and also to those other CUG members that allow 'incoming access'. When the value is set to not ...
cwaPreferentialCug: The CUG index of the 'preferential CUG' for this address. There can be only one 'preferential CUG' for an address. A CUG user subscribing to 'preferential CUG' nominates a CUG index which the network uses as a default to identify the required CUG in the a ...
ciscoWanAtmCugGroup: This group contains the CUGs for each ATM address on the managed system.
ciscoWanAtmAddressCugGroup: This group contains objects for the CUG for each ATM address on the managed system.

Download IPHost Network Monitor (500 monitors for 30 days, 50 monitors free forever) to start monitoring network devices right now.

MIBs list