CISCO-WAN-CES-CONN-STAT-MIB Download

cesmChanCntGrpTable

The statistics table for CES connections. For every entry in cesmChanCnfGrpTable, there will be an entry in this table.

cesmChanCntGrpEntry

An entry in the CES connection statistics table.

cesCntChanNum

This object identifies the channel number of the CESM channel. The value for this object is same as the value specified in 'cesCnfChanNum'.

cesChanState

This object indicates the channel/connection status. The possible value(s) are : notConfigured (1) : Channel is not configured okay (2) : channel is ok alarm (3) : channel is in alarm. The connection segment is not broken. failed ( ...

cesXmtATMState

This object indicates the transmit state of channel on the ATM side (towards the network). The possible value(s) are : other(1) : values other than mentioned below. normal(2) : Channel is ok. sendingAIS(3) : Sending AIS signal sendingFERF(4): Sen ...

cesRcvATMState

This variable indicates the receive state of channel on the ATM side (from the network). The possible value(s) are : other(1) : values other than mentioned below. normal(2) : Channel is ok. receivingAIS (3) : receiving AIS signal receivingF ...

cesCellLossStatus

When cells are lost for the CellLossIntegrationPeriod the value is set to loss ( 2). when cells are no longer lost, the value is set to noLoss(1).

cesReassCells

The number of cells played out to T1/E1/T3E3 interface. It excludes cells that were discarded for any reason.

cesGenCells

The number of cells generated from T1/E1/T3E3 interface and sent towards network.

cesHdrErrors

The number of AAL-1 header errors detected and possibly corrected. Header errors include correctable and uncor- rectable CRC, plus bad parity.

cesPointerReframes

The number of events in which the AAL1 reassembler found that an SDT pointer is not where it is expected and the and the pointer must be reacquired. Not supported in CESM-8P due to limitation in AAL1 SAR. Not applicable for CESM-4T1/E1 and CESM-T3/E3

cesLostCells

The number of cells lost in egress direction due to AAL 1 header errors and missing cells.

cesBufUnderflows

The number of buffer underflows in Egress direction Not supported in CESM-8P due limitation in AAL1 SAR.

cesBufOverflows

The number of buffer overflows in Egress direction Not supported in CESM-8P due to limitation in AAL1 SAR.

cesIngrDiscardedBytes

The number of bytes discarded due to shelf alarm in ingress direction from port data. Not supported in CESM-8P.

cesUflowInsCells

The number of All 1's cells inserted in case of Egress Buffer Underflow Not supported in CESM-8P.

cesOflowDropBytes

The number of bytes discarded in Egress direction because of Egress buffer overflow Not supported in CESM-8P.

cesCellSeqMismatchCnt

The number of times SAR received a valid out of sequence AAL-1 cell from CellBus.

counterClrButton

This object is used for clearing the counters in this table. If set to resetCounters(2), then counters will be cleared.

cesChanSecUptime

The number of seconds channel is in service This object is only applicable for CESM-8P.

cesChanSignalingStatus

This variable indicates the connection signalling status Connection will be in Idle suppression mode if it in on-hook. Not applicable for T3E3 and CESM-4P.

cesChanStatusBitMap

This variable indicates the consolidated bit map of the channel alarm state. Individual bit positions are as defined below. Bit position Fail/Alarm Reason ------------ ---------- ------ 0 Alarm Reserved 1 Alarm ...

cwcConnGenStatsGroup

The objects related to Circuit Emulation connection statistics applicable for multiple cards(Service Modules).

cwcConnStatsGroup

The objects related to Circuit Emulation connection statistics applicable for few cards(Service Module).