CISCO-WAN-FR-RSRC-PART-MIB Download
The MIB module to configure the resource partition
on Frame Relay Ports.
IPHost Network Monitor offer an easy way of SNMP monitoring your Cisco Servers, Routers, Switches, Bridges,
Firewalls, Repeaters.
OID list for CISCO-WAN-FR-RSRC-PART-MIB
- frPortCnfResPartGrpTable
- This table is for configuring resource partition parameters. A resource partition is configured on frame relay port. The frame relay port if available in ifTable is identified by ifType values frameRelayService(44) and frForward(158).
- frPortCnfResPartGrpEntry
- An entry for a resource partition. A resource partition has to be created before connections can be added on a frame relay port.
- frResPartPortNum
- The value of this object identifies the frame relay port. The value of this object must be same as the value of 'portNum' from frPortCnfPortGrpTable. If frame relay port is available in ifTable, then the value of this object must be same as the ifIndex va ...
- frResPartCtrlrNum
- This object identifies the controller which can be used for accessing the resources. The possible values are : par(1) : Portable Auto Route controller. : This value is applicable in Release 1.x. pnni(2): PNNI Controller. : This value is applicable in Rel ...
- frResPartNumOfLcnAvail
- This represents number of LCNs available for this controller and this port. FRSM VHS 2CT3 can support LCNs upto 4000. FRSM12 can support LCNs upto 16000. ::= { frPortCnfResPartGrpEntry 4 } SYNTAX Integer32 (0..8388607) MAX-ACCESS read-write STATUS ...
- frResPartDlciHigh
- This represents high end of reserved DLCI.
- frResPartIngrPctBW
- The percentage of total ingress bandwidth reserved.
- frResPartEgrPctBW
- The percentage of total egress bandwidth reserved.
- frResPartCtrlrID
- This is the controller identifier for the resource patition. The default value is set for PNNI controller. Refer object frResPartCtrlrNum.
- ciscoWanFrRsrcPartGroup
- A collection of objects providing the Frame Relay Port resource partition configuration information.
Download IPHost Network Monitor (500 monitors for 30 days, 50 monitors free forever) to start monitoring network devices right now.
