CISCO-WAN-MGC-REDUN-MIB Download

mgcRedundancyGrpTable

Multiple Media Gateway Controllers can be grouped together as part of the same MGC redundancy group. This configuration supports the notion of redundant Media Gateway Controllers. This table keeps track of the MGCs in a redundancy group. It is used to cre ...

mgcRedundancyGrpEntry

Each row in the table is identified by an mgcRedundancyGrpNum and mgcNumber. Before adding an entry into this table the MGC has to be added in mgcTable defined in CISCO-WAN-MG-MIB. A single mgcRedundancyGrp can have multiple MGCs.

mgcRedundancyGrpNum

This is the MGC group number. A group can contain more than 1 MGC. So for a group containing more than 1 MGC, there will be more than 1 row of this table that will have a common group number.

mgcRedundancyGrpPref

Allows to configure the preference on a MGCs. The GW use this object in the selection of an MGC when there are multiple MGCs in the same MGC redundancy group. This object can be modified at any time while the mgcRedundancyGrpRowStatus is 'active'. It has ...

mgcRedundancyGrpActState

This object is used to denote the status of MGC within an MGC Redundancy group. 'mgcActive' - Indicates the MGC is active or controlling the GW. 'mgcInactive' - Indicates the MGC is in standby state.

mgcRedundancyGrpRowStatus

Controls the creation and deletion of a table entry. An entry may be created using the 'createAndGo' option. When the row is successfully created, the RowStatus would be set to 'active' by the agent. An entry may be deleted by setting the RowStatus to 'de ...

mgcRedundancyGrpParamTable

This table contains the parameters of the MGC redundancy groups like the association state and priority of the group within the GW. An entry in this table is implicitly created when the first MGC is added for an MGC redundancy group. The objects are set t ...

mgcRedundancyGrpParamEntry

Represents an individual entry in the mgcRedundancyGrpParamTable.

mgcRedundancyGrpStateChangeNtfy

This object 'true(1) will enable sending state change notifications to the MGC. 'false(2)' will disable sending state change notifications to MGC, for example, if MGCP/SGCP is the protocol used, then RSIPs are sent to the MGC if this object is set to 'tru ...

mgcRedundancyGrpCommState

Represents the state of the communication between the GW and the MGC (call agent) group. The possible values are: 'commOk': This indicates that the communication between the gateway and the media gateway controller is ok. 'commLoss': This indicates that t ...

mgcRedundancyGrpPriority

This field determines the priority amongst the MGC redundancy groups within the GW. A MGC group with a priority of 0 means that the MGC group is not interested in receiving GW initiated messages. A group with a priority value of 1 has the highest preferen ...

mgcRedundancyGrpProtocolTable

This table contains information about which protocols are being used in a particular association between the gateway and the MGC redundancy groups. Because there may be a number of different protocols in use for a particular control association between th ...

mgcRedundancyGrpProtocolEntry

Represents an individual table entry in mgcRedundancyGrpProtocolTable. When active, it is expected that mgcRedundancyGrpNum and mgProtocolNumber contain valid values that maintain referential integrity into mgcRedundancyGrpTable and mgSupportedProtocolTab ...

mgcRedundancyGrpProtocolRowStatus

Controls the creation and deletion of a table entry. An entry may be created using the 'createAndGo' option. When the row is successfully created, the mgcRedundancyGrpProtocolRowStatus would be set to 'active' by the agent. An entry can be modified at any ...

mgcRedGrpProtPersistEvtPolicy

This object determines how the persistent events will be notified. Persistent events are events that call agent wants to be notified without explicitly requesting for it. A set of events can be provisioned on the Gateway as persistent events. Every event ...

mgcRedGrpProtQuarantinePolicy

This object determines the quarantine policy when MGC doesn't explicitly specify one. When a Request Notification is received from the MGC, the Gateway on observing the first event that qualifies to be notified will generate a Notify message with the list ...

mgcRedGrpProtSigEvtOnOffPolicy

This object enables the user to provision the way signaled events from CA are handled by the gateway. This is configurable on a per MGC redundancy group, per protocol basis. If the protocol is MGCP 1.0 the default of this object is 'deleteOnlyNegatedEvent ...

mgcRedGrpProtProvisionalResponse

This object enables or disables sending provisional response to the CA when processing a request received from the CA. The provisional response to the CA indicates that the GW is processing the request and will send a final response once the processing is ...

mgcRedGrpProtResponseAckAttr

Every command from the MGC could contain Response Acknowledgement attribute. This attribute consists a list of transaction IDs which are acknowledged by the Call agent. The gateway on receiving this can free up the resources attached to this transaction I ...

mgcRedGrpProtDisconnectProcedure

This attribute describes whether disconnected procedure is enabled/disabled per protocol per MGC group configured. The endpoint becomes disconnected when a gateway initiated commands are sent to the MGC and has not received any response from the MGC. The ...

mgcRedGrpProtCancelGraceful

This attribute describes whether notification of RSIP cancel graceful is enabled/disabled per protocol per MGC group configured. The Restart in Progress command with the restart method of cancel graceful indicates that the gateway is canceling a previousl ...

mgcRedundancyGroup

This group contains objects that apply to the redundant media gateway controller group.

mgcRedundancyParamGroup

This group contains objects that describe the parameters of an MGC redundancy group.

mgcRedundancyProtocolGroup

This group contains the protocols configured for an MGC redundancy group.