CISCO-WAN-RSRC-PART-MIB Download
The MIB module to manage resource partition objects. A resource
partition is configured on a virtual interface (ifType value
atmVirtual(149)) or atm interface (ifType value atm(37)).
An administrator can partition connection related resources like
VPI, VCI ranges, bandwidth and total amount of available connection
entries in the switch through these MIB tables.
IPHost Network Monitor offer an easy way of SNMP monitoring your Cisco Servers, Routers, Switches, Bridges,
Firewalls, Repeaters.
OID list for CISCO-WAN-RSRC-PART-MIB
- cwRsrcPartConfTable
- This table is for configuring resource partition parameters. A resource partition is configured on an interface whose ifType is atmVirtual(149) or atm(37). An entry can be added, deleted or modified. Entries in this table can be modified through the comma ...
- cwRsrcPartConfEntry
- An entry for a resource partition. A resource partition has to be created before connections can be added to the interface. In the following objects, ingress direction means, from network to switch, and egress direction means, from switch to network.
- cwRsrcPartID
- This is resource partition identifier. One interface can have multiple resource partitions on it.
- cwRsrcPartController
- This is controller identifier. Once a resource partition is added the controller identified by this identifier can access resources configured for this partition.
- cwRsrcPartEgrGuarPctBwConf
- The guaranteed percentage bandwidth reserved for the resource partition in egress direction. The sum of all resource partition guaranteed bandwidths cannot exceed 100% of interface's guaranteed bandwidth.
- cwRsrcPartEgrMaxPctBwConf
- The maximum percentage bandwidth for the resource partition in egress direction. This is not the guaranteed bandwidth. If bandwidth is available, the resource partition will be allocated bandwidth up to this value.
- cwRsrcPartIngGuarPctBwConf
- The guaranteed percentage bandwidth reserved for the resource partition in ingress direction. The sum of all resource partition guaranteed bandwidths cannot exceed 100% of the interface's guaranteed bandwidth.
- cwRsrcPartIngMaxPctBwConf
- The maximum percentage bandwidth allocated for the resource partition in ingress direction. This is not the guaranteed bandwidth. If bandwidth is available, the resource partition will be allocated bandwidth up to this value.
- cwRsrcPartEgrPctBwUsed
- This is the percentage bandwidth used by the resource partition in egress direction.
- cwRsrcPartIngPctBwUsed
- This is the percentage bandwidth used by the resource partition in ingress direction.
- cwRsrcPartEgrPctBwAvail
- This is the percentage bandwidth available on the resource partition in egress direction.
- cwRsrcPartIngPctBwAvail
- This is the percentage bandwidth available on the resource partition in ingress direction.
- cwRsrcPartVpiLo
- The beginning of the VPI range for this partition. Connections provisioned on this partition must have a VPI greater than or equal to this value.
- cwRsrcPartVpiHigh
- The end of the VPI range for this partition. Connections provisioned on this partition must have a VPI less than or equal to this value.
- cwRsrcPartVciLo
- The beginning of the VCI range for this partition. Connections provisioned on this partition must have VCI greater than or equal to this VCI.
- cwRsrcPartVciHigh
- The end of the VCI range reserved for this partition. Connections provisioned on this partition must have a VCI less than or equal to this VCI.
- cwRsrcPartGuarCon
- The guaranteed number of connections that can be configured on this partition.
- cwRsrcPartMaxCon
- The maximum number of connections that can be configured on this partition.
- cwRsrcPartUsedCon
- This is the number of connections currently in use on this partition.
- cwRsrcPartAvailCon
- This is the number of connections available, that can be added on this partition.
- cwRsrcPartRowStatus
- This will add, delete or modify the partition. Resource partition can be created by setting this object to createAndGo(4). Row may be deleted by setting this object to destroy(6).
- cwRsrcPartIlmiTable
- This is the ILMI configuration table. If the interface supports ILMI, the agent will automatically create a row in this table when a row is created in cwRsrcPartConfTable. The ILMI objects will be set with default values, i.e, with ILMI signalling disable ...
- cwRsrcPartIlmiEntry
- If the interface supports ILMI, the agent will automatically create an entry in this table when a resource partition is created. By default, ILMI is disabled on resource partitions. ILMI can be enabled by setting 'cwRsrcPartIlmiEnabled' to 'true'. An en ...
- cwRsrcPartIlmiEnabled
- By setting the value of this object to 'true', ILMI signalling is enabled on the resource partition.
- cwRsrcPartSignallingVpi
- Indicates the VPI on which signalling cells arrive on this resource partition.
- cwRsrcPartSignallingVci
- Indicates the VCI on which signalling cells arrive on this resource partition.
- cwRsrcPartIlmiTrapEnable
- ILMI trap generation can be enabled or disabled using this object.
- cwRsrcPartIlmiEstablishConPollIntvl
- The amount of time S between successive transmissions of ILMI messages on this interface for the purpose of detecting establishment of ILMI connectivity.
- cwRsrcPartIlmiCheckConPollIntvl
- The amount of time T between successive transmissions of ILMI messages on this interface for the purpose of detecting loss of ILMI connectivity. The distinguished value zero disables ILMI connectivity procedures on this interface.
- cwRsrcPartIlmiConPollInactFactor
- The number K of consecutive polls on this interface for which no ILMI response message is received before ILMI connectivity is declared lost.
- cwRsrcPartCtlrConfTable
- This table is for configuring additional controllers to manage a resource partition.
- cwRsrcPartCtlrConfEntry
- An entry for additional controllers to control an existing resource partition. The resource partition, identified by indices ifIndex and cwRsrcPartID, must exist in the cwRsrcPartConfTable. An entry from this table is deleted if the cwRsrcPartID associat ...
- cwRsrcPartCtlrController
- This is controller identifier. One resource partition can be controlled by multiple controllers.User may want to do this to configure redundant controllers.
- cwRsrcPartCtlrRowStatus
- This is used to create a row in the cwRsrcPartCtlrConfTable. A redundant controller is added by setting this object to createAndGo(4). Row may be deleted by setting this object to destroy(6).
- cwRsrcSvcAggregateTable
- This table is for configuring an SVC aggregate resource within a resource partition. This provides aggregate bandwidth and VPI range within a resource partition that CAC (Call Admission Control) can dynamically allocate the required resource from it to es ...
- cwRsrcSvcAggregateEntry
- An entry of SVC Aggregate. An SVC Aggregate is used to reserve certain bandwidth in the resource partition to be dedicated for call set-up.
- cwRsrcSvcAggrVpiLow
- The low end of the VPI range for this SVC aggregate. This value has to be greater than or equal to the value of cwRsrcPartVpiLo of the containing resource partition. SVC connection provisioned on this SVC aggregate must have a VPI greater than or equal to ...
- cwRsrcSvcAggrVpiHigh
- The high end of the VPI range for this SVC aggregate. This value has to be less than or equal to the value of cwRsrcPartVpiHigh of the containing resource partition. SVC connection provisioned on this SVC aggregate must have a VPI less than or equal to th ...
- cwRsrcSvcAggrEgrPctBw
- This object indicates the percentage egress bandwidth that is used by SVC connections within the resource partition. The total egress bandwidth will be used by SVC connections within the resource partition is determined by multiplying the value of this ob ...
- cwRsrcSvcAggrIngPctBw
- This object indicates the percentage ingress bandwidth that is used by SVC connections within the resource partition. The total ingress bandwidth will be used by SVC connections within the resource partition is determined by multiplying the value of this ...
- cwRsrcSvcAggrChanVADTolerance
- The value in this object refers to the customer accepted drop rate for voice connections when the bandwidth usage exceeds allowed value. The actual range of this object is 0.0001(or 0.01%) to 1.00(or 100%). However, when the underlying CAC(Connection Admi ...
- cwRsrcSvcAggrChanVADDutyCycle
- This object refers to the talk-spurts duty cycle. The actual range of this object is 0.01(or 1%) to 0.99(or 99%). When the value of this object is to be passed to underlying CAC module this value has to be divided by 100.
- cwRsrcSvcAggrRowStatus
- When an entry of the table is created, the following objects are mandatory: cwRsrcSvcAggrVpiLow cwRsrcSvcAggrVpiHigh cwRsrcSvcAggrEgrPctBw cwRsrcSvcAggrIngPctBw
- cwRsrcPartMIBGroup
- These are objects related to Resource partition group.
- cwRsrcPartIlmiMIBGroup
- These are objects related to Ilmi configuration on a Resource partition.
- cwRsrcPartMappingGroup
- These are objects used to configure redundant controllers for resource partitions.
- cwRsrcSvcAggrGroup
- These are objects used to configure SVC aggregate within resource partitions.
Download IPHost Network Monitor (500 monitors for 30 days, 50 monitors free forever) to start monitoring network devices right now.
