CPQSCSI Download

cpqScsiMibRevMajor

The Major Revision level. A change in the major revision level represents a major change in the architecture of the MIB. A change in the major revision level may indicate a significant change in the information supported and/or the meaning of the support ...

cpqScsiMibRevMinor

The Minor Revision level. A change in the minor revision level may represent some minor additional support; no changes to any pre-existing information has occurred.

cpqScsiMibCondition

The overall condition. This object represents the overall status of the Compaq SCSI system represented by this MIB.

cpqScsiNw3xDriverName

Compaq SCSI Drive Device Driver Name. This is the name of the NetWare v3.1x SCSI device driver. It can be used for identification purposes.

cpqScsiNw3xDriverVers

Compaq SCSI Drive Device Driver Version. This is the version of the NetWare v3.1x SCSI device driver. It can be used for identification purposes.

cpqScsiNw3xDriverPollType

Compaq SCSI Drive Device Driver Poll Type. The SNMP instrument agent collects information from the device driver in two ways: other(1) The management agent does not recognize this poll type. You may need to upgrade your software. polled(2) Indicates that ...

cpqScsiNw3xDriverPollTime

Compaq SCSI Drive Device Driver Poll Time. If the nw3xDriverPollType is polled(2) this value shows how frequently, in seconds, the instrument agent requests information from the device driver. To change the poll time, you need to unload and then reload th ...

cpqScsiNw3xCntlrInfoTable

Compaq SCSI Controller Information Table.

cpqScsiNw3xCntlrInfoEntry

Compaq SCSI Controller Information Table Entry.

cpqScsiNw3xCntlrIndex

Compaq SCSI Controller Index. The controller index indicates to which SCSI adapter instance this table entry belongs. The controller index is the physical slot in the computer system where the adapter is located.

cpqScsiNw3xBusIndex

Compaq SCSI Bus Index. The bus index indicates to which SCSI bus instance on an adapter this table entry belongs. The instances start at one and increment for each SCSI bus on an adapter.

cpqScsiNw3xXptDesc

Compaq SCSI XPT Description. This is a description of the Transport Layer (XPT) module, CPQSXPT.DSK. The Transport Layer manages requests from the device driver and routes them to the appropriate SCSI Interface Module (SIM). This architecture is based o ...

cpqScsiNw3xXptVers

Compaq SCSI XPT Version. This is the version of the Transport Layer (XPT) module, CPQSXPT.DSK. The Transport Layer manages requests from the device driver and routes them to the appropriate SCSI Interface Module (SIM). This architecture is based on the ...

cpqScsiNw3xSimDesc

Compaq SCSI SIM Description. This is a description of the SCSI Interface Module (SIM). Each type of controller model has a specific SIM designed for it. The SIM accepts requests from the Transport Layer and delivers them to the physical device. This arch ...

cpqScsiNw3xSimVers

Compaq SCSI SIM Version. This is the version of the SCSI Interface Module (SIM). Each type of controller model has a specific SIM designed for it. The SIM accepts requests from the Transport Layer and delivers them to the physical device. This architectu ...

cpqScsiNw3xHbaDesc

Compaq SCSI HBA Description. This is a description of the SCSI Host Bus Adapter (HBA). An HBA represents one instance of a SCSI bus in the SCSI Interface Module (SIM). This architecture is based on the ANSI SCSI-2 Common Access Method (CAM) specification ...

cpqScsiLogDrvStatTable

Compaq SCSI Logical Drive Statistics Table.

cpqScsiLogDrvStatEntry

Compaq SCSI Device Driver Statistics Table Entry.

cpqScsiNw3xStatCntlrIndex

Compaq SCSI Controller Index. The controller index indicates to which SCSI adapter instance this table entry belongs. The controller index is the physical slot in the computer system where the adapter is located.

cpqScsiNw3xStatBusIndex

Compaq SCSI Bus Index. The bus index indicates to which SCSI bus instance on an adapter this table entry belongs. The instances start at one and increment for each SCSI bus on a card.

cpqScsiNw3xStatLogDrvIndex

Compaq SCSI Logical Drive Index. The logical drive index indicates to which logical drive instance on a SCSI bus this table entry belongs. The logical drive index starts at one and increments for each logical drive on the SCSI bus.

cpqScsiNw3xTotalReads

Compaq SCSI Logical Drive Total Reads. This shows the total number of reads performed by the device driver to this logical drive. This number is reset each time the device driver is loaded for this logical drive.

cpqScsiNw3xTotalWrites

Compaq SCSI Logical Drive Total Writes. This shows the total number of writes performed by the device driver to this logical drive. This number is reset each time the device driver is loaded for this logical drive.

cpqScsiNw3xCorrReads

Compaq SCSI Logical Drive Corrected Reads. This is the total number of read commands sent to the specified logical drive which had to be corrected by fault tolerance. This number is reset each time the device driver is loaded for this logical drive.

cpqScsiNw3xCorrWrites

Compaq SCSI Logical Drive Corrected Writes. This is the total number of write commands sent to the specified logical drive which had to be corrected by fault tolerance. This number is reset each time the device driver is loaded for this logical drive.

cpqScsiNw3xFatalReads

Compaq SCSI Logical Drive Fatal Reads. This is the total number of read commands sent to the specified logical drive which failed. This number is reset each time the device driver is loaded for this logical drive.

cpqScsiNw3xFatalWrites

Compaq SCSI Logical Drive Fatal Writes. This is the total number of write commands sent to the specified logical drive which failed. This number is reset each time the device driver is loaded for this logical drive.

cpqScsiVolMapTable

Compaq SCSI Drive Volume Map Table.

cpqScsiVolMapEntry

Compaq SCSI Drive Volume Map Table Entry.

cpqScsiNw3xVolCntlrIndex

Compaq SCSI Cntlr Index. The controller index indicates to which SCSI adapter instance this table entry belongs. The controller index is the physical slot in the computer system where the adapter is located.

cpqScsiNw3xVolBusIndex

Compaq SCSI Bus Index. The bus index indicates to which SCSI bus instance on an adapter this table entry belongs. The instances start at one and increment for each SCSI bus on a card.

cpqScsiNw3xVolLogDrvIndex

Compaq SCSI Logical Drive Index. The logical drive index indicates to which logical drive instance on a SCSI bus this table entry belongs. The logical drive index starts at one and increments for each logical drive on the SCSI bus.

cpqScsiNw3xVolMap

Compaq SCSI Drive Volume Map. This is a data structure containing the volume mappings for this logical drive. There are 8 entries in a NetWare volume mapping. An entry can be null indicating no mapping exists. Each entry has the following format. BYTE ...

cpqScsiOsCommonPollFreq

The Insight Agent's polling frequency. The frequency, in seconds, at which the Insight Agent requests information from the device driver. A frequency of zero indicates that the Insight Agent retrieves the information upon request of a management station, ...

cpqScsiOsCommonModuleTable

A table of software modules that provide an interface to the device this MIB describes.

cpqScsiOsCommonModuleEntry

A description of a software modules that provide an interface to the device this MIB describes.

cpqScsiOsCommonModuleIndex

A unique index for this module description.

cpqScsiOsCommonModuleName

The module name.

cpqScsiOsCommonModuleVersion

The module version in XX.YY format. Where XX is the major version number and YY is the minor version number. This field will be a null (size 0) string if the agent cannot provide the module version.

cpqScsiOsCommonModuleDate

The module date. field octets contents range ===== ====== ======= ===== 1 1-2 year 0..65536 2 3 month 1..12 3 4 day 1..31 4 ...

cpqScsiOsCommonModulePurpose

The purpose of the module described in this entry.

cpqScsiCntlrTable

Compaq SCSI Controller Table.

cpqScsiCntlrEntry

Compaq SCSI Controller Table Entry.

cpqScsiCntlrIndex

Compaq SCSI Controller Index. The controller index indicates to which SCSI adapter instance this table entry belongs. The controller index is the physical slot in the computer system where the adapter is located.

cpqScsiCntlrBusIndex

Compaq SCSI Bus Index. The bus index indicates to which SCSI bus instance on an adapter this table entry belongs. The instances start at one and increment for each SCSI bus on a card.

cpqScsiCntlrModel

Compaq SCSI Controller Model. The is the controller's model and can be used for identification purposes. The following values are defined: other(1) The management agent does not recognize this model. You may need to upgrade your software. cpqs710(2) ...

cpqScsiCntlrFWVers

Compaq SCSI Controller Firmware Version. This is the version of the firmware on the SCSI controller. If the SCSI controller does not use firmware then this string will be of length zero (0). Some SCSI bus controllers are script driven and use the compute ...

cpqScsiCntlrSWVers

Compaq SCSI Controller Software Version. This is the version of any software upgrade which is being used in place of the firmware with the controller. If the SCSI controller has not been upgraded via software or does not have firmware then this string wi ...

cpqScsiCntlrSlot

Compaq SCSI Controller Slot. This is the physical slot in which this controller is installed. This information can be used for identification purposes.

cpqScsiCntlrStatus

Compaq SCSI Controller Status. This is the current status of the controller. The following values are currently defined: other(1) The controller is not operational due to reasons other than hardware failure. The controller may be intentionally disabled. ...

cpqScsiCntlrHardResets

Compaq SCSI Controller Hard Resets. This is the number of times the SCSI Hardware Interface driver detected that the SCSI bus has been reset since the driver was loaded. Hard resets may occasionally occur due to device errors. If this value should rise dr ...

cpqScsiCntlrSoftResets

Compaq SCSI Controller Soft Resets. This is the number of times the SCSI Hardware Interface driver has issued a reset command to all devices on a SCSI bus since the driver was loaded. Soft resets occur when the device driver is initializing the SCSI bus f ...

cpqScsiCntlrTimeouts

Compaq SCSI Controller Time-outs. This is the number of times, since the driver was loaded, that the SCSI Hardware Interface driver issued a SCSI command but did not receive a reply within a specified amount of time. Timeouts may occasionally occur when a ...

cpqScsiCntlrBaseIOAddr

Compaq SCSI Controller Base I/O Address. This is the I/O address that the SCSI Hardware Interface driver uses to communicate with the SCSI bus controller. This value can be used for identification purposes.

cpqScsiCntlrCondition

Compaq SCSI Controller Condition. This is the overall condition of the controller and all of the logical drives and physical drives controlled by it. The following values are defined: other(1) The management agent does not recognize the status as one of t ...

cpqScsiCntlrSerialNum

Compaq SCSI Controller Serial Number. This is the serial number assigned to the controller. This can be used for identification purposes. This field will be a null (size 0) string if the management agent cannot provide the serial number.

cpqScsiCntlrBusWidth

Compaq SCSI Controller Data Bus Width. This is the physical width of the controller's SCSI data bus. other(1) The management agent does not recognize this width. You may need to upgrade your software. narrow(2) The SCSI controller supports an 8-bit narro ...

cpqScsiCntlrModelExtended

SCSI Controller Model Name. This is the model name for SCSI controllers not defined by cpqScsiCntlrModel enumerations. This field will be a null (size 0) string if the management agent cannot provide the SCSI Controller description.

cpqScsiCntlrHwLocation

A text description of the hardware location, on complex multi SBB hardware only, for the SCSI controller. A NULL string indicates that the hardware location could not be determined or is irrelevant.

cpqScsiLogDrvTable

Compaq SCSI Logical Drive Table.

cpqScsiLogDrvEntry

Compaq SCSI Logical Drive Entry.

cpqScsiLogDrvCntlrIndex

Compaq SCSI Logical Drive Controller Index. The controller index indicates to which SCSI adapter instance this table entry belongs. The controller index is the physical slot in the computer where the adapter is located.

cpqScsiLogDrvBusIndex

Compaq SCSI Logical Drive Bus Index. The bus index indicates to which SCSI bus instance on an adapter this table entry belongs. The instances start at one and increment for each SCSI bus on a card.

cpqScsiLogDrvIndex

Compaq SCSI Logical Drive Index. The logical drive index indicates to which logical drive instance on a SCSI bus this table entry belongs. The logical drive index starts at one and increments for each logical drive on the SCSI bus.

cpqScsiLogDrvFaultTol

Compaq SCSI Logical Drive Fault Tolerance. This shows the fault tolerance mode of the logical drive. To change the fault tolerance mode, run the Compaq EISA Configuration Utility. The following values are valid for the Logical Drive Fault Tolerance: other ...

cpqScsiLogDrvStatus

Compaq SCSI Logical Drive Status. The logical drive can be in one of the following states: other(1) The management agent does not recognize the status. You may need to upgrade your software. ok(2) Indicates that the logical drive is in normal operation mo ...

cpqScsiLogDrvSize

Compaq SCSI Logical Drive Size. This is the size of the logical drive in megabytes. This value is calculated using the value 1,048,576 (2^20) as a megabyte. Drive manufacturers sometimes use the number 1,000,000 as a megabyte when giving drive capacities ...

cpqScsiLogDrvPhyDrvIDs

Compaq SCSI Logical Drive Physical Drive IDs. This lists the physical drive SCSI ID's which are associated with this logical drive. These are the same IDs which can be used as indices into the physical drive table. Each byte of the string is an index.

cpqScsiLogDrvCondition

Compaq SCSI Logical Drive Condition. This is the overall condition of the logical drive and all of the physical drives which comprise it. The following values are defined: other(1) The management agent does not recognize the status. You may need to upgra ...

cpqScsiPhyDrvTable

Compaq SCSI Physical Drive Table.

cpqScsiPhyDrvEntry

Compaq SCSI Physical Drive Entry.

cpqScsiPhyDrvCntlrIndex

Compaq SCSI Physical Drive Controller Index. The controller index indicates to which SCSI adapter instance this table entry belongs. The controller index is the physical slot in the computer where the adapter is located.

cpqScsiPhyDrvBusIndex

Compaq SCSI Physical Drive Bus Index. The bus index indicates to which SCSI bus instance on an adapter this table entry belongs. The instances start at one and increment for each SCSI bus on a card.

cpqScsiPhyDrvIndex

Compaq SCSI Physical Drive Index. The physical drive index indicates to which physical drive instance on a SCSI bus this table entry belongs. The physical drive index is the SCSI ID being used by that drive.

cpqScsiPhyDrvModel

Compaq SCSI Physical Drive Model. This is a description of the physical drive's model as returned by the SCSI inquiry command. This can be used for identification purposes.

cpqScsiPhyDrvFWRev

Compaq SCSI Physical Drive Firmware Revision. This is the revision level of the physical drive as returned by the SCSI inquiry command. This can be used for identification purposes.

cpqScsiPhyDrvVendor

Compaq SCSI Physical Drive Vendor. This is the physical drive vendor's name as returned by the SCSI inquiry command. This can be used for identification purposes.

cpqScsiPhyDrvSize

Compaq SCSI Physical Drive Size in MB. This is the size of the physical drive in megabytes. This value is calculated using the value 1,048,576 (2^20) as a megabyte. Drive manufacturers sometimes use the number 1,000,000 as a megabyte when giving drive ca ...

cpqScsiPhyDrvScsiID

Compaq SCSI Physical Drive SCSI ID. This is the SCSI ID used by the physical drive. SCSI ID's identify a physical drive on a bus so the controller can communicate with it.

cpqScsiPhyDrvStatus

Compaq SCSI Physical Drive Status. The physical drive can be in one of the following states: other(1) The drive is in a state other than one of those listed below. ok(2) Indicates that the physical drive is in normal operation mode. No user action is nece ...

cpqScsiPhyDrvServiceHours

Compaq SCSI Physical Drive Service Time in hours. This shows the total number of hours that a physical drive has been operating under the device driver. You can use the service time to calculate rates for other physical drive objects.

cpqScsiPhyDrvHighReadSectors

Compaq SCSI Physical Drive Sectors Read (high). The phyDrvHighReadSectors and the phyDrvlowReadSectors together show the total number of sectors read from the physical disk drive during the service time (phyDrvServiceHours). The actual number of sectors r ...

cpqScsiPhyDrvLowReadSectors

Compaq SCSI Physical Drive Sectors Read (low). The phyDrvHighReadSectors and the phyDrvlowReadSectors together show the total number of sectors read from the physical disk drive during the service time (phyDrvServiceHours). The actual number of sectors re ...

cpqScsiPhyDrvHighWriteSectors

Compaq SCSI Physical Drive Sectors Written (high). The phyDrvHighWriteSectors and the phyDrvlowWriteSectors together show the total number of sectors written to the physical disk drive during the service time (phyDrvServiceHours). The actual number of sec ...

cpqScsiPhyDrvLowWriteSectors

Compaq SCSI Physical Drive Sectors Written (low). The phyDrvHighWriteSectors and the phyDrvlowWriteSectors together show the total number of sectors written to the physical disk drive during the service time (phyDrvServiceHours). The actual number of sect ...

cpqScsiPhyDrvHardReadErrs

Compaq SCSI Physical Drive Hard Read Errors. This is the number of read errors that have occurred on a drive that could not be recovered by a physical drive's Error Correction Code (ECC) algorithm, retries or any other recovery mechanisms during the servi ...

cpqScsiPhyDrvHardWriteErrs

Compaq SCSI Physical Drive Hard Write Errors. This is the number of write errors that have occurred on a drive that could not be recovered by retries or any other recovery mechanisms during the service time (phyDrvServiceHours). If you see any hard write ...

cpqScsiPhyDrvEccCorrReads

Compaq SCSI Physical Drive ECC Corrected Read Errors (high). This is the number of read requests that the drive had to use an Error Correction Code (ECC) algorithm on to recover data during the service time (phyDrvServiceHours). ECC corrected reads will o ...

cpqScsiPhyDrvRecvReadErrs

Compaq SCSI Physical Drive Recovered Read Errors. This is the number of read requests that the drive had to use retries or other recovery mechanisms on to recover data during the service time (phyDrvServiceHours). Retry corrected reads will occasionally o ...

cpqScsiPhyDrvRecvWriteErrs

Compaq SCSI Physical Drive Recovered Write Errors. This is the number of write requests that the drive had to use retries or other recovery mechanisms on to recover data during the service time (phyDrvServiceHours). Retry corrected writes will occasionall ...

cpqScsiPhyDrvSeekErrs

Compaq SCSI Physical Drive Seek Errors. This is the number of times a drive head seek failed during the service time (phyDrvServiceHours). Seek errors will occasionally occur over time. Having a large number of seek errors does not necessarily indicate t ...

cpqScsiPhyDrvSpinupTime

Compaq SCSI Physical Drive Spin up Time (tenths of seconds). This is the time it takes for a physical drive to spin up to full speed. Disks require time to gain momentum and reach operating speed. As cars are tested to go from 0 mph to 60 mph in x number ...

cpqScsiPhyDrvUsedReallocs

Compaq SCSI Physical Drive Used Reallocation Sectors. This shows the number of sectors of the reallocation area that have been used by the physical drive over the life of the drive. Because of the nature of magnetic disks, certain sectors on a drive may h ...

cpqScsiPhyDrvTimeouts

Compaq SCSI Physical Drive Time-out Errors. This is the number of times the drive failed to complete a request within a specified amount of time during the service time (phyDrvServiceHours). Time-outs may occasionally occur when a device fails to process ...

cpqScsiPhyDrvPostErrs

Compaq SCSI Physical Drive Power On Self Test (POST) Errors. This is the number of times that a drive failed its self test during the service time (phyDrvServiceHours). The drive does a self test each time power is applied to the system. If you see any s ...

cpqScsiPhyDrvPostErrCode

Compaq SCSI Physical Drive Last POST Error Code. This is the result of the last SCSI command which caused a self test to fail. The value is split into three fields. The first byte is the SCSI Sense Qualifier. The second byte is the SCSI Sense Code. Th ...

cpqScsiPhyDrvCondition

Compaq SCSI Physical Drive Condition. This is the overall condition of the physical drive. The following values are defined: other(1) The Insight agent does not recognize the status. You may need to upgrade your software. ok(2) The physical drive is oper ...

cpqScsiPhyDrvFuncTest1

Compaq SCSI Physical Drive Functional Test 1. This is a percentage value that represents the operating efficiency of a drive. The functional test issues a series of SCSI commands and times the results. When the drive has the test run for the very first ...

cpqScsiPhyDrvFuncTest2

Compaq SCSI Physical Drive Functional Test 2. This is a percentage value that represents the operating efficiency of a drive. The functional test issues a series of SCSI commands and times the results. When the drive has the test run for the very first ...

cpqScsiPhyDrvStatsPreserved

Compaq SCSI Physical Drive Statistics Preservation Method. This value indicates how all of the objects in this table are saved over a power cycle. If the objects are not saved then all of their values will be reset whenever the device driver is unloaded. ...

cpqScsiPhyDrvSerialNum

Compaq SCSI Physical Drive Serial Number. This is the serial number assigned to the physical drive. This value is based upon the serial number as returned by the SCSI inquiry command but may have been modified due to space limitations. This can be used f ...

cpqScsiPhyDrvLocation

Compaq SCSI Physical Drive Location. This is the physical location of where the drive is located. The following values are defined: other(1) The drives are not located in any special product that identifies the location. proliant(2) The drives are locate ...

cpqScsiPhyDrvParent

Compaq SCSI Physical Drive Parent. This is the logical drive index to which this physical drive belongs.

cpqScsiPhyDrvSectorSize

Compaq SCSI Physical Drive Sector Size in Bytes. This allows one to convert counters that are reported in sectors to bytes.

cpqScsiPhyDrvHotPlug

Compaq SCSI Physical Drive Hot Plug Support Status. The following values are defined: other(1) The Insight agent is unable to determine if this drive supports hot plug replacement. hotPlug(2) The drive supports hot plug replacement. nonhotPlug(3) The driv ...

cpqScsiPhyDrvPlacement

Compaq SCSI Physical Drive Placement. The following values are defined: other(1) The agent is unable to determine if the drive is internal or external to the system chassis. internal(2) The drive is located in an internal Proliant system chassis. external ...

cpqScsiPhyDrvPreFailMonitoring

Compaq SCSI Physical Drive Predictive Failure Monitoring. The following values are defined: other(1) The agent is unable to determine if the drive supports predictive failure monitoring. notAvailable(2) This drive does not support predictive failure monit ...

cpqScsiPhyDrvOsName

Physical Drive OS Name. The OS name for this SCSI physical drive. This field will be a null (size 0) string if the agent does not support OS name.

cpqScsiTargetTable

Compaq SCSI Target Table.

cpqScsiTargetEntry

Compaq SCSI Target Entry.

cpqScsiTargetCntlrIndex

Compaq SCSI Target Controller Index. The controller index indicates to which SCSI adapter instance this table entry belongs. The controller index is the physical slot in the computer system where the adapter is located.

cpqScsiTargetBusIndex

Compaq SCSI Target Bus Index. The bus index indicates to which SCSI bus instance on an adapter card this table entry belongs. The instances start at one and increment for each SCSI bus on a card.

cpqScsiTargetScsiIdIndex

Compaq SCSI Target Device Index. The device index indicates to which device instance on a SCSI bus this table entry belongs. The device index is the SCSI ID being used by that device.

cpqScsiTargetType

Compaq SCSI Device Type. This is the type of SCSI device. The following types are defined: other(1) The Insight agent does not recognize this type. You may need to upgrade your software. disk(2) This is a direct-access device like a disk drive. tape(3) T ...

cpqScsiTargetModel

Compaq SCSI Device Model. This is a description of the device's model as returned by the SCSI inquiry command. This can be used for identification purposes.

cpqScsiTargetFWRev

Compaq SCSI Device Firmware Revision. This is the revision level of the device as returned by the SCSI inquiry command. This can be used for identification purposes.

cpqScsiTargetVendor

Compaq SCSI Device Vendor. This is the device vendor's name as returned by the SCSI inquiry command. This can be used for identification purposes.

cpqScsiTargetParityErrs

Compaq SCSI Device Bus Parity Errors. This is the number of parity errors seen on the SCSI bus while processing commands for this SCSI ID. This value is maintained since the SCSI Hardware Interface driver was loaded. Parity errors may occasionally occur. ...

cpqScsiTargetPhaseErrs

Compaq SCSI Device Bus Phase Errors. This is the number of times the SCSI bus entered an invalid operating state while processing commands for the SCSI ID. This value is maintained since the SCSI Hardware Interface driver was loaded. If you see any phase ...

cpqScsiTargetSelectTimeouts

Compaq SCSI Device Bus Select Time-outs. This is the number of times the controller attempted to start communications with a device by selecting it but the device did not respond. If you see any select time-outs you may have a problem. The device may hav ...

cpqScsiTargetMsgRejects

Compaq SCSI Device Bus Message Rejects. This is the number of times the device rejected a command because it did not support the specified operation since the SCSI Hardware Interface driver was loaded. A large number for this object does not indicate a pr ...

cpqScsiTargetNegPeriod

Compaq SCSI Device Negotiated Period. This is the amount of time that was negotiated between the controller and the device as a synchronous transfer window. A synchronous transfer window is how long the device can transfer data without requiring an acknow ...

cpqScsiTargetLocation

Compaq SCSI Device Location. This is the physical location of where the device is located. The following values are defined: other(1) The device is not located in any special product that identifies the location. proliant(2) The device is located in the C ...

cpqScsiTargetNegSpeed

Compaq SCSI Device Negotiated Speed. This is the data transfer speed that was negotiated between the controller and the device. This value is reported in bits per second.

cpqScsiTargetPhysWidth

Compaq SCSI Device Data Bus Physical Width. This is the physical width of the device's SCSI data bus. other(1) The management agent does not recognize this width. You may need to upgrade your software. narrow(2) The SCSI device supports an 8-bit narrow S ...

cpqScsiTargetNegWidth

Compaq SCSI Device Data Bus Negotiated Width. This is the width of the device's SCSI data bus that was negotiated between the controller and the device. This value is reported in bits.

cpqScsiTargetTypeExtended

Compaq SCSI Extended Device Type. This is additional information about the type of SCSI device. The following types are defined: other(1) This target does not have any extended type information. pdcd(2) This is a power-drive CD-ROM. removableDisk(3) This ...

cpqScsiTargetCurrentSpeed

Compaq SCSI Device Current Data Transfer Speed. The following values are defined: other(1) The agent is unable to determine the current negotiated data transfer speed for this drive. asynchronous(2) The negotiated data transfer speed for this drive is asy ...

cpqScsiCdDrvTable

Compaq Scsi CD-ROM Drive Table.

cpqScsiCdDrvEntry

Compaq Scsi CD-ROM Drive Entry.

cpqScsiCdDrvCntlrIndex

Compaq SCSI CD-ROM Drive Controller Index. The controller index indicates to which SCSI adapter instance this CD table entry belongs. The controller index is the physical slot in the computer where the adapter is located.

cpqScsiCdDrvBusIndex

Compaq SCSI CD-ROM Drive Bus Index. The bus index indicates to which SCSI bus instance on an adapter this table entry belongs. The instances start at one and increment for each SCSI bus on a card.

cpqScsiCdDrvScsiIdIndex

Compaq SCSI CD-ROM Drive Index. The CD-ROM drive index indicates to which CD-ROM drive instance on a SCSI bus this table entry belongs. The physical drive index is the SCSI ID being used by that CD drive.

cpqScsiCdDrvLunIndex

Compaq SCSI CD-ROM Drive Logical Unit Index. The CD-ROM drive logical unit index indicates to which physical drive logical unit on a SCSI ID instance on a SCSI bus this table entry belongs. The CD-ROM drive Lun index is the logical unit number being used ...

cpqScsiCdDrvModel

Compaq SCSI CD Device Model. This is a description of the device's model as returned by the Compaq SCSI inquiry command. This can be used for identification purposes.

cpqScsiCdDrvVendor

Compaq SCSI CD Drive Vendor. This is the CD drive vendor's name as returned by the Compaq SCSI inquiry command. This can be used for identification purposes.

cpqScsiCdDrvFwRev

Compaq SCSI CD-ROM Firmware Revision. This is used to differentiate the firmware versions which have the same CD-ROM drive vendor and model (as specified by cpqScsiCdVendor and cpqScsiCdModel). This can be retrieved by the SCSI inquiry command.

cpqCdLibraryTable

Compaq CD Library Table.

cpqCdLibraryEntry

Compaq CD Library Entry.

cpqCdLibraryCntlrIndex

Compaq SCSI CD Library Controller Index. The controller index indicates to which SCSI adapter instance this table entry belongs. The controller index is the physical slot in the computer system where the adapter is located.

cpqCdLibraryBusIndex

Compaq SCSI CD Library Bus Index. The bus index indicates to which SCSI bus instance on an adapter card this table entry belongs. The instances start at one and increment for each SCSI bus on a card.

cpqCdLibraryScsiIdIndex

Compaq SCSI CD Library Device Index. The device index indicates to which device instance on a SCSI bus this table entry belongs. The device index is the SCSI ID being used by that device.

cpqCdLibraryLunIndex

Compaq SCSI CD Library Logical Unit Index. The logical unit index indicates to which Lun device instance on a SCSI bus this table entry belongs. The logical unit index is the Lun being used by that device.

cpqCdLibraryCondition

Compaq CD Library Condition. This value represents the overall condition of this CD Library. The library can be in one of the following states: other(1) The library is in a state other than one of those listed below. ok(2) Indicates that the library is in ...

cpqCdLibraryStatus

Compaq CD Library Status. This value represents the status of this CD Library. The library can be in one of the following states: other(1) The library is in a state other than one of those listed below. ok(2) Indicates that the CD library fault light is i ...

cpqCdLibraryModel

Compaq SCSI CD Library Device Model. This is a description of the device's model as returned by the Compaq SCSI inquiry command. This can be used for identification purposes.

cpqCdLibraryVendor

Compaq SCSI CD Library Vendor. This is the CD Library drive vendor's name as returned by the Compaq SCSI inquiry command. This can be used for identification purposes.

cpqCdLibrarySerialNumber

Compaq CD Library Serial Number. This is the unit serial number for the library. It can be used for identification purposes.

cpqCdLibraryDriveList

Compaq CD Library Drive List This is a data structure containing the list of CD drive ids that are present in this library. The format is: BYTE Controller Number BYTE Bus Number BYTE SCSI ID BYTE Logical Unit Number There will be 1 structure ...

cpqCdLibraryFwRev

Compaq SCSI CD Library Firmware Revision. This is used to differentiate the firmware versions which have the same CD library vendor and model (as specified in cpqCdLibraryVendor and cpqCdLibraryModel). This can be retrieved by the SCSI inquiry command.

cpqCdLibraryFwSubtype

Compaq SCSI CD library Firmware Subtype. This is used to differentiate the firmware versions which have the same vendor and model. CD library will contain a value of 1 for this variable when they first ship, and this value will be incremented if future ve ...

cpqScsiTrapPkts

The total number of trap packets issued by the SCSI enterprise since the instrument agent was loaded.

cpqScsiTrapLogMaxSize

The maximum number of entries that will currently be kept in the trap log. If the maximum size has been reached and a new trap occurs the oldest trap will be removed.

cpqScsiTrapLogTable

An ordered list of trap log entries (conceptually a queue). The trap log entries will be kept in the order in which they were generated with the most recent trap at index 1 and the oldest trap entry at index trapLogMaxSize. If the maximum number size has ...

cpqScsiTrapLogEntry

A description of a trap event.

cpqScsiTrapLogIndex

The value of this object uniquely identifies this trapLogEntry at this time. The most recent trap will have an index of 1 and the oldest trap will have an index of trapLogMaxSize. Because of the queue-like nature of the trapLog this particular trap even ...

cpqScsiTrapType

The type of the trap event that this entry describes. This number refers to an entry in a list of traps enumerating the possible traps the Compaq SCSI agent may issue.

cpqScsiTrapTime

The time of the trap event that this entry describes. The time is given in year (first octet), month, day of month, hour, minute, second (last octet) order. Each octet gives the value in Binary Coded Decimal (BCD).

cpqSbMibRevMajor

The Major Revision level. A change in the major revision level represents a major change in the architecture of the MIB. A change in the major revision level may indicate a significant change in the information supported and/or the meaning of the suppor ...

cpqSbMibRevMinor

The Minor Revision level. A change in the minor revision level may represent some minor additional support; no changes to any pre-existing information has occurred.

cpqSbDeviceTable

Compaq SCSI Drive Bus Table

cpqSbDeviceEntry

Compaq SCSI Drive Bus Entry

cpqSbDevCntlrIndex

Compaq SCSI Device Bus Controller Index The controller index indicates which SCSI adapter card instance this table entry belongs to. The controller index is the physical slot in the computer system where the adapter card is located.

cpqSbDevBusIndex

Compaq SCSI Device Bus Index The bus index indicates which SCSI bus instance on an adapter card this table entry belongs to. The instances start at one and increment for each SCSI bus on a card.

cpqSbDevScsiIdIndex

Compaq SCSI Device Bus Physical Drive Index The physical drive index indicates which physical drive instance on a SCSI bus this table entry belongs to. The physical drive index is the SCSI ID being used by that device.

cpqSbDevType

Compaq SCSI Device Type This is the type of SCSI device. The following types are defined: other(1) The management agent does not recognize this type. You may need to upgrade you software. disk(2) This is a direct-access device like a disk drive. tape(3) ...

cpqSbDevModel

Compaq SCSI Device Model This is a description of the physical drive's model as returned by the SCSI inquiry command. This can be used for identification purposes.

cpqSbDevFWRev

Compaq SCSI Device Firmware Revision This is the revision level of the physical drive as returned by the SCSI inquiry command. This can be used for identification purposes.

cpqSbDevVendor

Compaq SCSI Device Vendor. This is the physical drive vendor's name as returned by the SCSI inquiry command. This can be used for identification purposes.

cpqSbDevParityErrs

Compaq SCSI Device Bus Parity Errors This is the number of parity errors seen on the SCSI bus while processing commands for this SCSI ID since the SCSI Interface Module was loaded. Parity errors may occasionally occur. If this value should rise dramatica ...

cpqSbDevPhaseErrs

Compaq SCSI Device Bus Phase Errors This is the number of times the SCSI bus entered an invalid operating state while processing commands for the SCSI ID since the SCSI Hardware Interface driver was loaded. If you see any phase errors you may have a probl ...

cpqSbDevSelectTimeouts

Compaq SCSI Device Bus Select Time-outs This is the number of times the controller attempted to start communications with a device by selecting it but the device did not respond. If you see any select time-outs you may have a problem. The device may have ...

cpqSbDevMsgRejects

Compaq SCSI Device Bus Message Rejects This is the number of times the device rejected a command because it did not support the specified operation since the SCSI Hardware Interface driver was loaded. A large number for this object does not indicate a pro ...

cpqSbDevNegPeriod

Compaq SCSI Device Negotiated Period This is the amount of time that was negotiated between the controller and the device as a synchronous transfer window. A synchronous transfer window is how long the device can transfer data without requiring an acknow ...

cpqSbDevLocation

Compaq SCSI Device Location This is the physical location of where the device is located. The following values are defined: other(1) The drives are not located in any special product that identifies the location. proliant(2) The drives are located in ...

cpqTapePhyDrvTable

Compaq Tape Physical Drive Table.

cpqTapePhyDrvEntry

Compaq Tape Physical Drive Entry.

cpqTapePhyDrvCntlrIndex

Compaq Tape Physical Drive Controller Index. The controller index indicates to which SCSI adapter instance this tape table entry belongs. The controller index is the physical slot in the computer where the adapter is located.

cpqTapePhyDrvBusIndex

Compaq Tape Physical Drive Bus Index. The bus index indicates to which SCSI bus instance on an adapter this table entry belongs. The instances start at one and increment for each SCSI bus on a card.

cpqTapePhyDrvScsiIdIndex

Compaq Tape Physical Drive Index. The physical drive index indicates to which physical drive instance on a SCSI bus this table entry belongs. The physical drive index is the SCSI ID being used by that tape drive.

cpqTapePhyDrvLunIndex

Compaq Tape Physical Drive Logical Unit Index. The physical drive logical unit index indicates to which physical drive logical unit on a SCSI ID instance on a SCSI bus this table entry belongs. The physical drive Lun index is the logical unit number bein ...

cpqTapePhyDrvType

Compaq Tape Device Type. This is the drives model, and can be used for identification purposes. The following values are defined: other(1) The management agent does not recognize this model. You may need to upgrade your software. cpqDat4-16(2) Compaq 4/8 ...

cpqTapePhyDrvCondition

Compaq Tape Physical Drive Status. The physical drive can be in one of the following states: other(1) The drive is in a state other than one of those listed below. ok(2) Indicates that the physical drive is in normal operation mode. No user action is nece ...

cpqTapePhyDrvMagSize

Compaq Tape Physical Drive Magazine Size. The number of tape slots available in the magazine cartridge that is currently loaded into the tape drive. For non-autoloader devices, this value will be 1.

cpqTapePhyDrvSerialNumber

Compaq Tape Physical Drive Serial Number. This is the unit serial number for the tape drive. It can be used for identification purposes.

cpqTapePhyDrvCleanReq

Compaq Tape Physical Drive Cleaning Required Status. This is an indication of whether the tape drive heads require a cleaning session to occur. If this variable indicates a need to clean the tape heads, then a cleaning tape will need to be inserted and r ...

cpqTapePhyDrvCleanTapeRepl

Compaq Tape Physical Drive Cleaning Tape Replacement Status. This variable is only applicable to autoloader tape drives. This variable indicates whether the cleaning tape which is inserted in an autoloader needs to be replaced because its cleaning capabil ...

cpqTapePhyDrvFwSubtype

Compaq Tape Physical Drive Firmware Subtype. This is used to differentiate the firmware versions which have the same tape drive type (as specified by cpqTapePhyDrvType). Tape drives will contain a value of 1 for this variable when they first ship, and th ...

cpqTapePhyDrvName

Compaq Tape Physical Drive Name.

cpqTapePhyDrvCleanTapeCount

Compaq Tape Physical Drive Cleaning Tape Count. This variable is only applicable to autoloader tape drives. This variable is a count from a tape drive of the number of cleanings done by the tape cleaner last in the drive.

cpqTapePhyDrvFwRev

Compaq Tape Physical Drive Firmware Revision. This is the revision level of the physical drive as returned by the SCSI inquiry command. This can be used for identification purposes.

cpqTapePhyDrvStatus

Compaq Tape Physical Drive Status. The tape physical drive can be in one of the following states: other(1) The tape drive is in a state other than one of those listed below. ok(2) Indicates that the tape physical drive is in normal operation mode. No use ...

cpqTapePhyDrvHotPlug

Compaq Tape Physical Drive Hot Plug Support Status. The following values are defined: other(1) The agent is unable to determine if this drive supports hot plug replacement. hotPlug(2) The drive supports hot plug replacement. nonhotPlug(3) The drive does n ...

cpqTapePhyDrvPlacement

Compaq Tape Physical Drive Placement. The following values are defined: other(1) The agent is unable to determine if the tape drive is internal or external to the system chassis. internal(2) The tape drive is located in an internal Proliant system chassis ...

cpqTapePhyDrvLibraryDrive

Compaq Tape Physical Drive Library Drive. This variable indicates whether or not the tape drive is part of a tape library. It can be in one of the following states: other(1) Indicates that the storage agents cannot determine if the tape drive is part of ...

cpqTapeCountersTable

Compaq Tape Counters Table.

cpqTapeCountersEntry

Compaq Tape Counters Entry.

cpqTapeCountersCntlrIndex

Compaq SCSI Counters Controller Index. The controller index indicates to which SCSI adapter instance this table entry belongs. The controller index is the physical slot in the computer system where the adapter is located.

cpqTapeCountersBusIndex

Compaq SCSI Counters Bus Index. The bus index indicates to which SCSI bus instance on an adapter card this table entry belongs. The instances start at one and increment for each SCSI bus on a card.

cpqTapeCountersScsiIdIndex

Compaq SCSI Counters Device Index. The device index indicates to which device instance on a SCSI bus this table entry belongs. The device index is the SCSI ID being used by that device.

cpqTapeCountersLunIndex

Compaq SCSI Counters Logical Unit Index. The logical unit index indicates to which Lun device instance on a SCSI bus this table entry belongs. The logical unit index is the Lun being used by that device.

cpqTapeCountersReWrites

Compaq Tape Device Re-write count. This is the number of times blocks had to be re-written to the device. This value is maintained since the Tape Hardware Interface driver was loaded. Re-write errors may occasionally occur. If this value should rise dra ...

cpqTapeCountersReReads

Compaq Tape Device Re-read count. This is the number of times blocks had to be re-read from the device. This value is maintained since the Tape Hardware Interface driver was loaded. Re-read errors may occasionally occur. If this value should rise dramat ...

cpqTapeCountersTotalErrors

Compaq Tape Device Total Errors. This is the total number of read/write errors encountered. This value is maintained since the Tape Hardware Interface driver was loaded. Errors may occasionally occur. If this value should rise dramatically, you may need ...

cpqTapeCountersTotalUncorrectable

Compaq Tape Device Total Uncorrectable Errors. This is the total number of read and write errors which could not be corrected. This value is maintained since the Tape Hardware Interface driver was loaded. Errors may occasionally occur. If this value sho ...

cpqTapeCountersTotalBytes

Compaq Tape Device Total Bytes. This is the number total number of bytes read/written to the tape currently installed in the device. This value is reset whenever a new tape is inserted into the device.

cpqTapeLibraryTable

Compaq Tape Library Table.

cpqTapeLibraryEntry

Compaq Tape Library Entry.

cpqTapeLibraryCntlrIndex

Compaq SCSI Library Controller Index. The controller index indicates to which SCSI adapter instance this table entry belongs. The controller index is the physical slot in the computer system where the adapter is located.

cpqTapeLibraryBusIndex

Compaq SCSI Library Bus Index. The bus index indicates to which SCSI bus instance on an adapter card this table entry belongs. The instances start at one and increment for each SCSI bus on a card.

cpqTapeLibraryScsiIdIndex

Compaq SCSI Library Device Index. The device index indicates to which device instance on a SCSI bus this table entry belongs. The device index is the SCSI ID being used by that device.

cpqTapeLibraryLunIndex

Compaq SCSI Library Logical Unit Index. The logical unit index indicates to which Lun device instance on a SCSI bus this table entry belongs. The logical unit index is the Lun being used by that device.

cpqTapeLibraryCondition

Compaq Tape Library Status. The library can be in one of the following states: other(1) The library is in a state other than one of those listed below. ok(2) Indicates that the library is in normal operation mode. No user action is necessary. degraded(3) ...

cpqTapeLibraryStatus

Error code returned by the last library error.

cpqTapeLibraryDoorStatus

Status of the library door. The door can be in one of the following states: other(1) The door is in a state other than one of those listed below. closed(2) The door is closed. open(3) The door is open. notSupported(4) The door status is not supported by t ...

cpqTapeLibraryStatHours

The number of hours of operation for the library.

cpqTapeLibraryStatMoves

The number of tape moves for the library loader arm.

cpqTapeLibraryName

Compaq Tape Library Name.

cpqTapeLibrarySerialNumber

Compaq Tape Library Serial Number. This is the unit serial number for the library. It can be used for identification purposes.

cpqTapeLibraryDriveList

Compaq Tape Library Drive List This is a data structure containing the list of tape drive ids that are present in this library. The format is: BYTE Controller Number BYTE Bus Number BYTE SCSI ID BYTE Logical Unit Number There will be 1 struct ...

cpqTapeLibraryState

Compaq Tape Library Status. The library can be in one of the following states: other(1) The library is in a state other than one of those listed below. ok(2) Indicates that the library is in normal operation mode. No user action is necessary. degraded(3) ...

cpqTapeLibraryTemperature

Compaq Tape Library Temperature Status. The library temperature can be in one of the following states: other(1) The library temperature status is unknown. notSupported(2) Indicates that the library cannot detect or report temperature. ok(3) Indicates that ...

cpqTapeLibraryRedundancy

Compaq Tape Library Redundancy Status. Redundancy status denotes the presence of internal redundant components such as fans, power supplies, etc. The library redundancy can be in one of the following states: other(1) The library redundancy status is unkno ...

cpqTapeLibraryHotSwap

Compaq Tape Library Hot Swap Status. Hot swap status denotes the presence of hot swappable internal components such as drives, fans, power supplies, etc. The library hot swap status can be in one of the following states: other(1) The library hot swap stat ...

cpqTapeLibraryFwRev

Compaq Tape Library Firmware Revision. This is the revision level of the tape library firmware as returned by the SCSI inquiry command. This can be used for identification purposes.