DGS3612-L2MGMT-MIB Download

MIBs list

IPHost Network Monitor offer an easy way of SNMP monitoring your D-Link Servers, Routers, Switches, Bridges, Firewalls, Repeaters.

OID list for DGS3612-L2MGMT-MIB

swDevInfoTotalNumOfPort: The number of ports within this switch. This value is the sum of the ports within this switch.
swDevInfoNumOfPortInUse: The number of ports in this switch connected to the segment or the end stations.
swDevModuleInfoTable: This table contains the module information.
swDevModuleInfoEntry: A list of management information for each unit in the system.
swDevModuleInfoUnitID: This object indicates the specific unit ID in the stacking/chassis table.
swDevModuleInfoModuleID: This object indicates the module ID of this unit.
swDevModuleInfoModuleName: A textual string containing name of the the module.
swDevModuleInfoReversion: A textual string containing reversion of the module.
swDevModuleInfoSerial: A textual string containing serial of the module.
swDevModuleInfoDescription: A textual string containing description of the module.
swDevInfoBootPromVersion: Boot Prom Version.
swDevInfoFirmwareVersion: Boot firmware Version.
swDevInfoFrontPanelLedStatus: This object is a set of system LED indications. The first two octets is defined as system LED. The first LED is power LED. The second LED is console LED. The third LED is RPS (Redundancy Power Supply) LED. The other octets following the second octets are ...
swL2DevCtrlStpState: This object can be enabled or disabled spanning tree algorithm during runtime of the system.
swL2DevCtrlIGMPSnooping: This object indicates layer 2 Internet Group Management Protocol (IGMP) capture function is enabled or disabled.
swL2DevCtrlIGMPSnoopingMcstRTOnly
swL2DevCtrlRmonState: This object can be enabled or disabled RMON.
swL2DevCtrlCleanAllStatisticCounter: As the object is set to active, all the statistic counters will be cleared. If set to normal, do nothing.
swL2DevCtrlVlanIdOfFDBTbl: Indicates the VLAN ID which the Dot1dTpFdbTable belongs to ; The default value is DEFAULT_VLAN_ID of system .
swL2DevCtrlManagementVlanId: This object controls which Vlan includes system ip. And the Vlan should have been created.
swL2MACNotifyState: This object can enabled or disabled MAC Notification.
swL2MACNotifyHistorySize: This object indicates the history size of variation MAC in address table. The default value is 1 .
swL2MACNotifyInterval: This object indicates the time interval in second for trigger the MAC notify message.
swL2DevCtrlWebTcpPort: This object can designate tcp port. When web disable this object can't accessible.
swL2DevCtrlTelnetState: This object control telnet status.
swL2DevCtrlTelnetTcpPort: This object can designate tcp port. When telnet disable this object can't accessible.
swL2DevCtrlIpAutoconfig
swL2DevCtrlLedPOEState: When set enabled(1), the POE LED is lighten. When set disabled(2), the Link/ACT/Speed LED is lighten.
swL2DevCtrlClipagingState
swL2DevCtrlLLDPState: Specifies the state of the LLDP function. When this function is enabled, the switch can start to transmit LLDP packets and receive and process the LLDP packets. The specific function of each port will depend on the per port LLDP setting. For the advertise ...
swL2DevAlarmNewRoot: When the device has become the new root of the Spanning Tree, this object decide whether to send a new root trap.
swL2DevAlarmTopologyChange: This object determine to send a trap or not when the switch topology was changed. If the object is enabled(3), the topologyChange trap is sent by the device when any of its configured ports transitions from the Learning state to the Forwarding state, or f ...
swL2DevAlarmLinkChange: This object determine to send a trap or not when the link was changed. If the object is enabled(3), the Link Change trap is sent by the device when any of its ports link change. The device doesn't send the trap if this object value is disabled or other.
swL2MultiFilterTable: A table that contains infomation about vlan multicast filter mode.
swL2MultiFilterEntry: A list of multicast filter mode information for each vlan.
swL2MultiFilterVid: vid for each vlan
swL2MultiFilterMode: vlan multicast filter mode.
swL2PortInfoTable: A table that contains information about every port.
swL2PortInfoEntry: A list of information for each port of the device.
swL2PortInfoPortIndex: This object indicates the module's port number.(1..Max port number in the module)
swL2PortInfoMediumType: Indicates medium type of the port number.
swL2PortInfoUnitID: Indicates ID of the unit in the system
swL2PortInfoType: This object indicates the connector type of this port.
swL2PortInfoLinkStatus: This object indicates the port link status.
swL2PortInfoNwayStatus: This object indicates the port speed and duplex mode.
swL2PortInfoErrDisReason: This object indicates the port if disabled and why error disabled.
swL2PortCtrlTable: A table that contains control information about every port.
swL2PortCtrlEntry: A list of control information for each port of the device.
swL2PortCtrlPortIndex: This object indicates the module's port number.(1..Max port number in the module)
swL2PortCtrlMediumType: Indicates medium type of the port number.
swL2PortCtrlUnitIndex: Indicates ID of the unit in the device
swL2PortCtrlAdminState: This object decide the port enabled or disabled.
swL2PortCtrlNwayState: Chose the port speed, duplex mode, and N-Way function mode.
swL2PortCtrlFlowCtrlState: The flow control mechanism is different between full duplex mode and half duplex mode. For half duplex mode, the jamming signal is asserted. For full duplex mode, IEEE 802.3x flow control function sends PAUSE frames and receives PAUSE frames.
swL2PortCtrlLockState: This object decide the port is locked or not.
swL2PortCtrlMACNotifyState: This object set each poet MAC notification state.
swL2PortCtrlMulticastfilter: -- "This object decide the multicast packets filtering mode on this port . This object configure the switch's jumbo frame settings.
swL2PortCtrlJumboFrameMaxSize: This object configure the switch's jumbo frame settings.
swL2QOSBandwidthControlEntry: A list of information contained in swL2QOSBandwidthControlTable.
swL2QOSBandwidthPortIndex: Indicates the port .
swL2QOSBandwidthRxRate: Indicates RX Rate(64kbit/sec) of the specifed port. Value 156250 means no limit.
swL2QOSBandwidthTxRate: Indicates TX Rate(64kbit/sec) of the specifed port. Value 156250 means no limit.
swL2QOSSchedulingTable: .
swL2QOSSchedulingEntry: A list of information contained in swL2QOSSchedulingTable.
swL2QOSSchedulingClassIndex: Indicates the hardware queue number.
swL2QOSSchedulingMaxPkts: Indicates the maximum number of packets the hardware priority queue will be allowed to transmit before allowing the next lowest priority queue to transmit its packets. a value between 0 and 15 can be specified.
swL2QOSSchedulingMechanism: Indicates the mechanism of QOS scheduling.
swL2QOS8021pUserPriorityTable: .
swL2QOS8021pUserPriorityEntry: A list of information contained in swL2QOS8021pUserPriorityTable.
swL2QOS8021pUserPriorityIndex: The 802.1p user priority .
swL2QOS8021pUserPriorityClass: The number of the switch's hardware priority queue. The switch has four hardware priority queues available. They are numbered between 0 (the lowest priority) and 6 (the highest priority).
swL2QOS8021pDefaultPriorityTable: .
swL2QOS8021pDefaultPriorityEntry: A list of information contained in swL2QOS8021pDefaultPriorityTable.
swL2QOS8021pDefaultPriorityIndex: Indicates the port number .
swL2QOS8021pDefaultPriority: The priority value to assign to untagged packets received by the switch ports on the switch..
swL2QOSSchedulingMechanismCtrl: This object can control QOS scheduling Mechanism.
swL2QOSHolPreventionCtrl: Control QOS Hol Prevention
swL2PortSecurityControlTable: port security feature which controls the address leaning capability and the traffic forwarding decision. Each port can have this function enabled or disabled. When it is enabled and a number is given said N, which allows N addresses to be learned at this ...
swL2PortSecurityControlEntry: A list of information contained in swL2PortSecurityControlTable.
swL2PortSecurityPortIndex: Indicates the secured port to lock address learning.
swL2PortSecurityMaxLernAddr: Indicates allowable number of addresses to be learned at this port.
swL2PortSecurityMode: Indicates the mode of locking address. In deleteOnTimeout(3) mode - the locked addresses can be aged out after aging timer expire. In this mode, when the locked address is aged out, the number of address can be learned has to be increased by one. In delet ...
swL2PortSecurityAdmState: Indicates administration state of locking address.
swL2PortSecurityDelVlanName: Indicates vlan name.
swL2PortSecurityDelPort: Indicates the port.0 indicated the function isn't working now.
swL2PortSecurityDelMacAddress: Specifies MAC address.
swL2PortSecurityDelActivity: .
swL2PortSecurityTrapLogState: -- "Used to enable or disable port lock trap log.. Maximum number of entries in the trunk configuration table (swL2TrunkCtrlTable).
swL2TrunkCurrentNumEntries: Current actived number of entries in the trunk configuration table.
swL2TrunkCtrlTable: This table specifys which ports group a set of ports(up to 8) into a single logical link.
swL2TrunkCtrlEntry: A list of information specifies which ports group a set of ports(up to 8) into a single logical link.
swL2TrunkIndex: The index of logical port trunk. The trunk group number depend on the existence of unit and module.
swL2TrunkName: The name of logical port trunk.
swL2TrunkMasterPort: The object indicates the master port number of the port trunk entry. When using Port Trunk, you can not configure the other ports of the group except the master port. Their configuration must be same as the master port (e.g. speed, duplex, enabled/disable ...
swL2TrunkMember: Indicate how many number of ports is included in this Trunk. The trunk port number depend on the existence of module. The maximum number of ports is 8 for one trunks.
swL2TrunkFloodingPort: The object indicates the flooding port number of the port trunk entry. The first port of the trunk is implicitly configured to be the flooding port.
swL2TrunkType: This object indicated that type of the trunk group. static : is static trunk group lacp : is LACP trunk group .
swL2TrunkState: This object indicates the status of this entry.
swL2TrunkActivePorts: The object indicates the active ports of the port trunk entry.
swL2TrunkAlgorithm: This object configures to part of the packet examined by the switch when selecting the egress port for transmitting load-sharing data.
swL2TrunkLACPPortTable: This table specifys which ports group a set of ports(up to 8) into a single logical link.
swL2TrunkLACPPortEntry: A list of information specifies which ports group a set of ports(up to 8) into a single logical link.
swL2TrunkLACPPortIndex: The index of logical port lacp.
swL2TrunkLACPPortState: The state of logical port lacp.
swL2MirrorLogicTargetPort: This object indicates switch which port will sniff another port. A trunk port member cannot be configured as a target Snooping port. The port number is the sequential (logical) number which is also applied to bridge MIB, etc.
swL2MirrorPortSourceIngress: The represent the ingress into the source port packet to sniffed.
swL2MirrorPortSourceEgress: The represent the egress from the source port packet to sniffed.
swL2MirrorPortState: This object indicates the port mirroring state. other(1) - this entry is currently in use but the conditions under which it will remain so are different from each of the following values. disabled(2) - writing this value to the object, and then the corres ...
swL2IGMPMaxSupportedVlans: Maximum number of Vlans in the layer 2 IGMP control table (swL2IGMPCtrlTable).
swL2IGMPMaxIpGroupNumPerVlan: Maximum number of multicast ip group per Vlan in the layer 2 IGMP information table (swL2IGMPQueryInfoTable).
swL2IGMPCtrlEntry: The entry in IGMP control table (swL2IGMPCtrlTable). The entry is effective only when IGMP capture switch (swL2DevCtrlIGMPSnooping) is enabled.
swL2IGMPQueryInterval: The frequency at which IGMP Host-Query packets are transmitted on this switch.
swL2IGMPMaxResponseTime: The maximum query response time on this switch.
swL2IGMPRobustness: The Robustness Variable allows tuning for the expected packet loss on a subnet. If a subnet is expected to be lossy, the Robustness Variable may be increased. IGMP is robust to (Robustness Variable-1) packet losses.
swL2IGMPLastMemberQueryInterval: The Last Member Query Interval is the Max Response Time inserted into Group-Specific Queries sent in response to Leave Group messages, and is also the amount of time between Group-Specific Query messages.
swL2IGMPHostTimeout: The timer value for sending IGMP query packet when none was sent by the host in the LAN. The timer works in per-VLAN basis. Our device will be activated to send the query message if the timer is expired. Please reference RFC2236-1997.
swL2IGMPRouteTimeout: The Router Timeout is how long a host must wait after hearing a Query before it may send any IGMPv2 messages.
swL2IGMPLeaveTimer: When a querier receives a Leave Group message for a group that has group members on the reception interface, it sends Group-Specific Queries every swL2IGMPLeaveTimer to the group being left.
swL2IGMPQueryState: This object decide the IGMP query enabled or disabled.
swL2IGMPCurrentState: This object indicates the current IGMP query state.
swL2IGMPCtrlState: This object indicates the status of this entry. other(1) - this entry is currently in use but the conditions under which it will remain so are different from each of the following values. disable(2) - IGMP funtion is disabled for this entry. enable(3) - ...
swL2IGMPFastLeaveState: This object indicates the fast_leave status of this entry. other(1) - this entry is currently in use but the conditions under which it will remain so are different from each of the following values. disable(2) - IGMP fast-leave funtion is disabled for thi ...
swL2IGMPQueryInfoTable: The table contains the number current IGMP query packets which is captured by this device, as well as the IGMP query packets sent by the device.
swL2IGMPQueryInfoEntry: Information about current IGMP query information, provided that swL2DevCtrlIGMPSnooping and swL2IGMPCtrState of associated VLAN entry are all enabled.
swL2IGMPInfoQueryCount: This object indicates the number of query packets received since the IGMP function enabled, in per-VLAN basis.
swL2IGMPInfoTxQueryCount: This object indicates the send count of IGMP query messages, in per-VLAN basis. In case of IGMP timer expiration, the switch sends IGMP query packets to related VLAN member ports and increment this object by 1.
swL2IGMPInfoTable: The table containing current IGMP information which captured by this device, provided that swL2DevCtrlIGMPSnooping and swL2IGMPCtrlState of associated VLAN entry are all enabled. Note that the priority of IGMP table entries is lower than Filtering Table, ...
swL2IGMPInfoEntry: Information about current IGMP information which captured by this device, provided that swL2DevCtrlIGMPSnooping and swL2IGMPCtrlState of associated VLAN entry are all enabled.
swL2IGMPVid: This object indicates the Vid of individual IGMP table entry. It shows the Vid of IGMP report information captured on network.
swL2IGMPGroupIpAddr: This object is identify group ip address which is captured from IGMP packet, in per-Vlan basis.
swL2IGMPMacAddr: This object is identify mac address which is corresponding to swL2IGMPGroupIpAddr, in per-Vlan basis.
swL2IGMPPortMap: This object indicates which ports are belong to the same multicast group, in per-Vlan basis. Each multicast group has a octect string to indicate with port map. The most significant bit represents the lowest numbered port, and the least significant bit re ...
swL2IGMPIpGroupReportCount: This object indicate how much report packet was receive by our device corresponding with this entry from IGMP function enabled, in per-Vlan basis.
swL2IGMPRouterPortsTable: The table controls the Vlan's IGMP router ports function.
swL2IGMPRouterPortsEntry: The entry in IGMP router ports table (swL2IGMPRouterPortsTable).
swL2IGMPRouterPortsVid: This object indicates the IGMP router ports entry's VLAN id. If VLAN is disabled, the Vid is always 0 and cannot be changed by management users. If VLAN is in Port-Base mode, the Vid is arranged from 1 to 12, fixed form. If VLAN is in 802.1q mode, the Vid ...
swL2IGMPRouterStaticPortList
swL2IGMPRouterDynamicPortList
swL2IGMPRouterForbiddenPortList
swL2IGMPMulticastVlanTable: The information of the IGMP snooping multicast vlan table.
swL2IGMPMulticastVlanEntry: The entry of swL2IGMPMulticastVlanTable.
swL2IGMPMulticastVlanid: This object indicates the vlan id of the IGMP snooping multicast vlan entry.
swL2IGMPMulticastVlanName: This object indicates the vlan name of the IGMP snooping multicast vlan entry.
swL2IGMPMulticastVlanSourcePort: This object indicate the portlist of the source ports of IGMP snooping multicast vlan. The source ports will be set as tag ports of the vlan entry. And the IGMP control messages received from the member ports would be forwarded to the source ports.
swL2IGMPMulticastVlanMemberPort: This object indicate the portlist of the member ports of IGMP snooping multicast vlan. The source ports will be set as untag ports of the vlan entry. And the IGMP control messages received from the member ports would be forwarded to the source ports.
swL2IGMPMulticastVlanReplaceSourceIP: The replace source IP of this multicast vlan.
swL2IGMPMulticastVlanRangeName: The name of multicast address range. When read, it shows NULL.
swL2IGMPMulticastVlanRangeState: This object is uesed to add or delete the specified multicast address range. when read it shows none(1); when set add(2) or delete(3),the swL2IGMPMulticastVlanRangeName should not be NULL. When set deleteAll(4), means delete all swL2IGMPMulticastVlanRange ...
swL2IGMPMulticastVlanState: This object can be enabled or disabled IGMP_snooping multicast VLAN.
swL2IGMPMulticastVlanRowStatus: This object indicates the status of this entry.
swL2IGMPForwardingTable: The table containing current IGMP forwarding information which captured by this device, provided that swL2DevCtrlIGMPSnooping and swL2IGMPCtrlState of associated VLAN entry are all enabled. Note that the priority of IGMP table entries is lower than Filter ...
swL2IGMPForwardingEntry: Information about current IGMP forwarding information which captured by this device, provided that swL2DevCtrlIGMPSnooping and swL2IGMPCtrlState of associated VLAN entry are all enabled.
swL2IGMPForwardingVid: This object indicates the Vid of individual IGMP table entry. It shows the Vid of IGMP report information captured on network.
swL2IGMPForwardingSrcIp: This object is identify source ip address.
swL2IGMPForwardingGroupAddr: This object is identify group ip address.
swL2IGMPForwardingPortMember: This object indicates which ports are belong to the same multicast group, in per-Vlan basis.
swL2IGMPMulticastVlanGroupTable: The table containing the IGMP snooping multicast VLAN group information
swL2IGMPMulticastVlanGroupEntry: Information about current IGMP snooping multicast VLAN group.
swL2IGMPMulticastVlanGroupVid: This object indicates the Vid of IGMP snooping multicast VLAN group.
swL2IGMPMulticastVlanGroupRangeName: The name of multicast address range.
swL2IGMPMulticastVlanGroupHead: The head of multicast address range.
swL2IGMPMulticastVlanGroupTail: The tail of multicast address range.
swL2TrafficCtrlTable: -- "This table specifys the storm traffic control configuration. -- "A list of information specifies the storm traffic control -- configuration. -- "The index of logical port trunk. The trunk group number depend ...
swL2TrafficSegEntry: A list of information specifies the port with its traffic forward list.
swL2TrafficSegPort: The port number of the logical port.
swL2TrafficSegForwardPorts: The port list that the specific port can forward traffic.
swL2IpLimitedMulticastTable: This entity's per-port Limited IP multicast address range table.
swL2IpLimitedMulticastEntry: A particular route to a particular destination, under a particular policy. Once an entry be built,it shouldn't be modified.That is,it just support create and delete action.
swL2IpLimitedMulticastPortIndex: A port to config the limited multicast address.
swL2IpLimitedMulticastHead: The head of multicast address range.
swL2IpLimitedMulticastTail: The tail of multicast address range.
swL2IpLimitedMulticastAccess: It allow you to permit or deny multicast range.
swL2IpLimitedMulticastState: Enable or disable limited multicast address for the chosen port.
swL2IpLimitedMulticastDelState: Enable or disable delete limited multicast address for the chosen port.
swL2IpLimitedMulticastRangeName: The name of multicast address range. When read, it shows NULL.
swL2IpLimitedMulticastRangeNameState: Add or delete the specified multicast address range. When read, it shows other(1); When set add(2) or delete(3), the swL2IpLimitedMulticastRangeName should be set also, and it should not be NULL. When set deleteAll(4), means delete all swL2IpLimitedMultic ...
swL2LimitedMulticastAddressTable: A table contains the limited multicast address information.
swL2LimitedMulticastAddressEntry: The information of limited multicast address.
swL2LimitedMulticastAddressPort: The port index.
swL2LimitedMulticastAddressRangeName: The name of multicast address range.
swL2LimitedMulticastAddressHead: The head of multicast address range.
swL2LimitedMulticastAddressTail: The tail of multicast address range.
swL2VlanTable: A table containing current configuration information for each VLAN currently configured into the device by (local or network) management, or dynamically created as a result of GVRP requests received.
swL2VlanEntry: Information for a VLAN configured into the device by (local or network) management, or dynamically created as a result of GVRP requests received.
swL2VlanIndex: The VLAN ID of the VLAN to be created. The range is 1 - 4094.
swL2VlanName: The name of the VLAN to be displayed.
swL2VlanType: The type of the VLAN to be displayed.
swL2VlanMemberPorts: A range of member ports to the VLAN.
swL2VlanStaticPorts: A range of static ports to the VLAN.
swL2VlanStaticTaggedPorts: Specifies the additional ports as tagged.
swL2VlanStaticUntaggedPorts: Specifies the additional ports as untagged.
swL2VlanForbiddenPorts: The set of ports which are prohibited by management from being included in the egress list for this VLAN. Changes to this object that cause a port to be included or excluded affect the per-port per-VLAN Registrar control for Registration Forbidden for the ...
swL2VlanCurrentTaggedPorts: The set of ports which are transmitting traffic for this VLAN as tagged frames.
swL2VlanCurrentUntaggedPorts: The set of ports which are transmitting traffic for this VLAN as untagged frames.
swL2VlanAdvertisementState: Specifies the VLAN as able to join GVRP If this parameter is not set, the VLAN cannot be configured to have forbidden ports. This flag protocol VLAN is fixed to DISABLE.
swL2PVIDAutoAssignmentState: This object controls the PVID auto assigment state. If 'Auto-assign PVID' is disabled, PVID only be changed by PVID configuration (user changes explicitly). The VLAN configuration will not automatically change PVID. If 'Auto-assign PVID' is enabled, PVID ...
swL2dot1vProtocolGroupTable: A table that contains mappings from Protocol Templates to Protocol Group Identifiers used for Port-and-Protocol-based VLAN Classification.
swL2dot1vProtocolGroupEntry: A mapping from a Protocol Template to a Protocol Group Identifier.
swL2dot1vProtocolTemplateFrameType: The data-link encapsulation format or the 'detagged_frame_type' in a Protocol Template.
swL2dot1vProtocolTemplateProtocolValue: The identification of the protocol above the data-link layer in a Protocol Template. Depending on the frame type, the octet string will have one of the following values: For 'ethernet', 'rfc1042' and 'snap8021H', this is the 16-bit (2-octet) IEEE 802.3 T ...
swL2dot1vProtocolGroupId: Represents a group of protocols that are associated together when assigning a VID to a frame.
swL2dot1vProtocolGroupRowStatus: This object indicates the status of this entry.
swL2dot1vProtocolPortTable: A table that contains VID sets used for Port-and-Protocol-based VLAN Classification.
swL2dot1vProtocolPortEntry: A VID set for a port.
swL2dot1vProtocolPort: The port number of the port.
swL2dot1vProtocolPortGroupId: Designates a group of protocols in the Protocol Group Database.
swL2dot1vProtocolPortGroupVid: The VID associated with a group of protocols for each port.
--swL2dot1vProtocolPortGroupPriority: -- "The Priority associated with a group of protocols for -- each port. This object indicates the status of this entry.
swL2MulticastRangeTable: A table contains multicast address range information.
swL2MulticastRangeEntry: Information about multicast address range.
swL2MulticastRangeName: The name of multicast address range.
swL2MulticastRangeHead: The head of multicast address range.
swL2MulticastRangeTail: The tail of multicast address range.
swL2MulticastRangeState: This object indicates the status of this entry.
swL2macNotifyInfo: This object indicates the last time reboot information.

Download IPHost Network Monitor (500 monitors for 30 days, 50 monitors free forever) to start monitoring network devices right now.

MIBs list