DOCS-DRF-MIB Download

dependencies

Registration point for M-CMTS characterization of PHY parameters dependencies.

docsDrfPhyParamFixValue

Indicates that this PHY parameter is fixed and cannot be changed.

docsDrfPhyParamSameValue

Indicates that the PHY parameter value is the same for the elements in a dependency group; thus, a change in the PHY parameter of an element in the group will change the PHY parameter value in the other elements of the dependency group.

docsDrfPhyParamAdjacentValues

Indicates that the PHY parameter has an adjacency or sequence pattern for the elements in a dependency group e.g., A group of channels all using J.83 Annex A, may set frequencies in the group by setting a 6 MHz spacing between the channels in the group. V ...

docsDrfPhyParamFrequencyRange

This object indicates that the frequency in a TSID Group is constrained to a frequency range. Vendors may extend the MIB construct containing this reference to detail such constraints or rather use a more detailed vendor-specific OBJECT-IDENTITY or a tabl ...

docsDrfDownstreamTable

Extensions for the DOCSIS RFI Downstream docsIfDownstreamChannelTable.

docsDrfDownstreamEntry

A conceptual row for this table. There is a corresponding entry for each entry of docsIfDownstreamChannelTable.

docsDrfDownstreamPhyDependencies

The summary of the Downstream Interface dependencies based on the constraints of docsDrfGroupDependencyEntry. A BIT position set to '1' indicates the PHY parameter belongs to a dependency group. A BIT position set to '0', indicates the PHY parameter does ...

docsDrfDownstreamCapabilitiesTable

This table contains the QAM channel capabilities for the Downstream Interface PHY parameters.

docsDrfDownstreamCapabilitiesEntry

A conceptual row for this table.

docsDrfDownstreamCapabFrequency

The QAM channel frequency capabilities. 'qamDependency' BIT set to '1' indicates the QAM channel frequency value has dependencies with other QAM channels and an entry that includes this QAM channel is in in docsDrfGroupDependencyTable for the PHY paramete ...

docsDrfDownstreamCapabBandwidth

The QAM channel Bandwidth capabilities. 'qamDependency' BIT set to '1' indicates the QAM channel bandwidth value has dependencies with other QAM channels as indicated in docsDrfGroupDependencyTable. 'chan6Mhz' set to '1' indicates 6 MHz channel width supp ...

docsDrfDownstreamCapabPower

The QAM channel Power capabilities. 'qamDependency' BIT set to '1' indicates the QAM channel power value has dependencies with other QAM channels as indicated in docsDrfGroupDependencyTable. When 'qamDependency' BIT is set to '1', a set to the power level ...

docsDrfDownstreamCapabModulation

The QAM channel Modulation capabilities. 'qamDependency' BIT set to '1' indicates the QAM channel modulation value has dependencies with other QAM channels as indicated in docsDrfGroupDependencyTable. 'qam64' set to '1' indicates 64 QAM modulation support ...

docsDrfDownstreamCapabInterleaver

The QAM channel Interleaver capabilities. 'qamDependency' BIT set to '1' indicates the QAM channel interleave value has dependencies with other QAM channels as indicated in docsDrfGroupDependencyTable. 'taps8Increment16' set to '1' indicates the support ...

docsDrfDownstreamCapabJ83Annex

The QAM channel J.83 Annex Capabilities. 'qamDependency' BIT set to '1' indicates the QAM channel J.83 Annex value has dependencies with other QAM channels as indicated in docsDrfGroupDependencyTable. 'annexA' set to '1' indicates J.83 Annex A support. 'a ...

docsDrfDownstreamCapabConcurrentServices

The QAM channel Concurrent Services Capabilities. 'qamDependency' BIT set to '1' indicates the QAM channel is part of a dependency group that supports concurrent services mode as indicated in docsDrfGroupDependencyTable. 'videoAndDocsis' BIT set to '1' in ...

docsDrfDownstreamCapabServicesTransport

The QAM channel Services transports modes Capabilities. 'qamDependency' BIT set to '1' indicates the QAM channel Service transport type has dependencies with other QAM channels as indicated in docsDrfGroupDependencyTable. 'mpeg2OverIP' set to '1' indicate ...

docsDrfDownstreamCapabMuting

The QAM channel muting capabilities. 'qamDependency' BIT set to '1' indicates the QAM Mute state has dependencies with other QAM channels as indicated in docsDrfGroupDependencyTable. When 'qamDependency' BIT is set to '1', a request to mute a QAM channels ...

docsDrfGroupDependencyTable

This table describes the rules that identify groups of QAM channels with PHY parameters dependencies. A PHY parameter dependency group means that a set to a QAM channel parameter may affect the value of other QAM Channels in the group. TSID is a broadcast ...

docsDrfGroupDependencyEntry

A conceptual row of this table. QAM channels are modeled as PhysicalClass 'port' from the ENTITY-MIB. An QAM channel can be represented as part of an entity MIB containment tree as follows: chassis(device) .container(Slot) .module(field-replaceable-module ...

docsDrfGroupDependencyPhyParam

This object represents the type of PHY parameter that may have dependencies when setting an individual object in the dependency group. The value 'all' may be used as a wildcard to indicate all PHY parameters have dependencies. The other enumeration values ...

docsDrfGroupDependencyPhysicalIndex

Indicates the physical element from where the PHY parameter dependency for QAM channels is derived. All the QAM channels elements under this Physical index will belong to a dependency group of the specified PHY parameter.

docsDrfGroupDependencyGroupID

The internal ID assigned for the QAM channels in the dependency group. The value of this object is unique in the scope of the PHY parameter being mapped.

docsDrfGroupDependencyType

The description of the type of dependency associated with this dependency group. Basic type of dependencies are docsDrfPhyParamSameValue, docsDrfPhyParamAdjacentValues, docsDrfPhyParamFrequencyRange. Vendors may define their own rules and policies to desc ...

docsDrfChannelBlockTable

This table configure attributes of block channels and Controls channel Block Tests. A channel block is an ENTITY-MIB containment of PhysicalClass 'module' that represent an RF connector.

docsDrfChannelBlockEntry

The conceptual row of this table. Entries in this table are created at system Initialization for Block Channels compliant to DRFI Specification. Sets in entries of this table persist after system initialization.

docsDrfChannelBlockPhysicalIndex

The Physical Index of the QAM Channel Block.

docsDrfChannelBlockNumberChannels

The Number of QAM Channels N associated with this entry. The value of this attribute corresponds to the number of channels that can be transmitted from this block

docsDrfChannelBlockCfgNumberChannels

The Number of QAM Channels N' to configure for the QAM block. This number corresponds to the number of channels that are configured to be currently transmitted by the block. The maximum number of channels per block follows the consideration of maximum num ...

docsDrfChannelBlockMute

The Mute control object for the Block Channel A set to this object to 'true' is reflected in ifOperStatus set to 'down' of the QAM channels associated to the block Channel. The opposite, a set to this object to 'false', is not necessarily reflected as ifO ...

docsDrfChannelBlockTestType

A set of in-service and out-of-service test modes. The value 'noTest'(1) is the normal condition after reinitialization where the QAM channels are expected in operation. 'noTest' It is also used to take out of testing mode a QAM channel within the block. ...

docsDrfChannelBlockTestIfIndex

The ifIndex of the QAM channel to perform the QAM channel test. A Set to a value that does not correspond to a QAM Channel within the Block channel returns error 'wrongValue'. A set to zero stops a current test execution.

docsDrfGroup

Group of objects implemented in M-CMTS compliant devices.

docsDrfCmtsGroup

Group of objects speficic for CMTS.