EDB-snmp Download
IPHost Network Monitor offer an easy way of SNMP monitoring your Servers, Routers, Switches, Bridges,
Firewalls, Repeaters.
OID list for EDB-snmp
- rTrapAddrTbl
- must be sent. Up to 10 entries in table
- rTrapAddrEntry
- rTrapAddrAddr
- requesting event notification
- rTrapAddrComm
- entity will expect. When reading the instance of this object the value has no meaning.
- rTrapAddrVer
- destination node
- rTrapAddrType
- reported to this address, bit 0 - authentication trap bit 1 - other SNMP traps bit 2 - Error Traps bit 3 - Diagnostic Traps bit 4 - Debug Traps bit 5 - Enterprise Traps other than fmDiagGenericTrap
- rTrapAddrState
- Determines status of this entry
- rTrapAddrFlag
- be deleted because of aging
- rTrapAddrAge
- Aging time of the entry (in sec)
- rTrapLearning
- automatically.
- rTrapAging
- entry
- pTrapAddrTbl
- must be sent. Up to 10 entries in table
- pTrapAddrEntry
- pTrapAddrAddr
- requesting event notification
- pTrapAddrComm
- entity will expect. When reading the instance of this object the value has no meaning.
- pTrapAddrVer
- destination node
- pTrapAddrType
- reported to this address, bit 0 - authentication trap bit 1 - other SNMP traps bit 2 - Error Traps bit 3 - Diagnostic Traps bit 4 - Debug Traps bit 5 - all Enterprise Traps other than fmDiagGenericTrap
- pTrapAddrState
- Determines status of this entry
- pTrapLearning
- automatically.
- pTrapAging
- entry
- fmSystemPSAdmin
- primary or secondary. When reading the instance of this object the value has no meaning.
- fmSystemPSOper
- Which power supply active
- fmSystemPSCfg
- Configuration of power supply
- fmSystemReset
- When reading the instance of this object the value has no meaning. cold reset is performed with selftest , while warm start is performed without selftest
- fmSystemSelfTestLevel
- executed upon cold-reset
- fmSystemVersion
- station type, hardware version and software version. The string can include CR and LF
- fmSystemIpAddr
- IP address of the agent
- fmSystemIPNetMask
- IP Network Mask
- fmSystemIPDefGway
- Default Gateway Address
- fmSystemFileServer
- IP address to which a TFTP for boot is sent.
- fmSystemBootFile
- sent as a TFTP request
- fmSystemBootMode
- Method for booting
- fmSystemDownLoad
- When reading the instance of this object the value has no meaning.
- fmSystemSlipIpAddr
- This is object is available only when slip interface exist
- fmSystemSlipIPNetMask
- This is object is available only when slip interface exist
- fmSystemSlipBaudRate
- This is object is available only when slip interface exist
- fmSystemSlipParity
- This is object is available only when slip interface exist
- fmSystemSlipStopBits
- This is object is available only when slip interface exist
- pfmSystemIpAddr
- IP address of the agent
- pfmSystemIPNetMask
- IP Network Mask
- pfmSystemIPDefGway
- Default Gateway Address
- pfmSystemFileServer
- IP address to which a TFTP for boot is sent.
- pfmSystemBootFile
- sent as a TFTP request
- pfmSystemBootMode
- Method for booting
- pfmSystemReadCommunity
- When reading the instance of this object the value has no meaning.
- pfmSystemWriteCommunity
- When reading the instance of this object the value has no meaning.
- pfmSystemSlipIpAddr
- This is object is available only when slip interface exist
- pfmSystemSlipIPNetMask
- This is object is available only when slip interface exist
- pfmSystemSlipBaudRate
- This is object is available only when slip interface exist
- pfmSystemSlipParity
- This is object is available only when slip interface exist
- pfmSystemSlipStopBits
- This is object is available only when slip interface exist
- fmSlotMasterClear
- clear command on all the slots. When reading the instance of this object the value has no meaning.
- fmSlotTable
- fmSlotEntry
- fmSlotIndex
- Slot Number
- fmSlotID
- ID of the card in the slot
- fmSlotDescr
- of the card
- fmSlotInfo
- Can be the use of that slot, its location etc...
- fmSlotStatus
- the card. For more information about the meaning of the status, read the specific user manual of each card. The channel leds are encoded into 2 bytes.
- fmSlotPrevStatus
- bits of the card. This object id is used mainly for traps (see Card Trap)
- fmSlotRLBSet
- RLB set operation on the channel passed as argument. When reading the instance of this object the value has no meaning.
- fmSlotRLBClear
- RLB clear operation on the channel passed as argument. When reading the instance of this object the value has no meaning.
- fmSlotExpCode
- on the slot. For expanded codes, see specific card user manual. When reading the instance of this object the value has no meaning. Extended command codes for NDS cards ------------------------------------ 1. CC892.303 (Ethernet) Code (Dec/Hex) Comma ...
- pfmSlotTrapMask
- will be sent, starting after next reset (permanent mask)
- fmSlotIpAddr
- This is object is available only for channel cards which have their own IP addresses (e.g., LC303/129)
- fmLUID
- Logic unit ID
- fmLUDescr
- of the logic unit
- fmLUStatus
- One byte of LU status
- fmLULinkSelect
- Setup LU link.
- fmLULoopBackSet
- When reading the instance of this object the value has no meaning.
- fmLULoopBackClr
- When reading the instance of this object the value has no meaning.
- fmLUTrapMask
- from the LU are sent, until next reset. (temporary mask)
- pfmLUTrapMask
- will be sent, starting after next reset (permanent mask)
- fmDiagConfig
- station type, hardware version and software version. The string can include CR and LF
- fmDiagTrapInfo
- is the trap code. The rest of the string is the extra information. Contains CR and LF char.
- fmDiagFaultTable
- Table of fault reports from the agent
- fmDiagFaultEntry
- fmDiagFaultIndex
- fault table
- fmDiagFaultReport
- Get the faults detected by the agent
- fmDiagDebug
- write into this variable or improper operation can occur.
Download IPHost Network Monitor (500 monitors for 30 days, 50 monitors free forever) to start monitoring network devices right now.
