IANA-MAU-MIB Download
This MIB module defines dot3MauType OBJECT-IDENTITIES and
IANAifMauListBits, IANAifMauMediaAvailable,
IANAifMauAutoNegCapBits, and IANAifJackType
TEXTUAL-CONVENTIONs, specifying enumerated values of the
ifMauTypeListBits, ifMauMediaAvailable / rpMauMediaAvailable,
ifMauAutoNegCapabilityBits / ifMauAutoNegCapAdvertisedBits /
ifMauAutoNegCapReceivedBits and ifJackType / rpJackType objects
respectively, defined in the MAU-MIB.
It is intended that each new MAU type, Media Availability
state, Auto Negotiation capability and/or Jack type defined by
the IEEE 802.3 working group and approved for publication in a
revision of IEEE Std 802.3 will be added to this MIB module,
provided that it is suitable for being managed by the base
objects in the MAU-MIB. An Expert Review, as defined in
RFC 2434 [RFC2434], is REQUIRED for such additions.
IPHost Network Monitor offer an easy way of SNMP monitoring your Cisco Servers, Routers, Switches, Bridges,
Firewalls, Repeaters.
OID list for IANA-MAU-MIB
- dot3MauTypeAUI
- no internal MAU, view from AUI
- dot3MauType10Base5
- thick coax MAU
- dot3MauTypeFoirl
- FOIRL MAU
- dot3MauType10Base2
- thin coax MAU
- dot3MauType10BaseT
- Note that it is strongly recommended that agents return either dot3MauType10BaseTHD or dot3MauType10BaseTFD if the duplex mode is known. However, management applications should be prepared to receive this MAU type value from older agent implementations.
- dot3MauType10BaseFP
- passive fiber MAU
- dot3MauType10BaseFB
- sync fiber MAU
- dot3MauType10BaseFL
- Note that it is strongly recommended that agents return either dot3MauType10BaseFLHD or dot3MauType10BaseFLFD if the duplex mode is known. However, management applications should be prepared to receive this MAU type value from older agent implementations ...
- dot3MauType10Broad36
- Note that 10BROAD36 MAUs can be attached to interfaces but not to repeaters.
- dot3MauType10BaseTHD
- UTP MAU, half duplex mode
- dot3MauType10BaseTFD
- UTP MAU, full duplex mode
- dot3MauType10BaseFLHD
- async fiber MAU, half duplex mode
- dot3MauType10BaseFLFD
- async fiber MAU, full duplex mode
- dot3MauType100BaseT4
- 4 pair category 3 UTP
- dot3MauType100BaseTXHD
- 2 pair category 5 UTP, half duplex mode
- dot3MauType100BaseTXFD
- 2 pair category 5 UTP, full duplex mode
- dot3MauType100BaseFXHD
- X fiber over PMT, half duplex mode
- dot3MauType100BaseFXFD
- X fiber over PMT, full duplex mode
- dot3MauType100BaseT2HD
- 2 pair category 3 UTP, half duplex mode
- dot3MauType100BaseT2FD
- 2 pair category 3 UTP, full duplex mode
- dot3MauType1000BaseXHD
- PCS/PMA, unknown PMD, half duplex mode
- dot3MauType1000BaseXFD
- PCS/PMA, unknown PMD, full duplex mode
- dot3MauType1000BaseLXHD
- mode
- dot3MauType1000BaseLXFD
- mode
- dot3MauType1000BaseSXHD
- duplex mode
- dot3MauType1000BaseSXFD
- duplex mode
- dot3MauType1000BaseCXHD
- duplex mode
- dot3MauType1000BaseCXFD
- duplex mode
- dot3MauType1000BaseTHD
- Four-pair Category 5 UTP, half duplex mode
- dot3MauType1000BaseTFD
- Four-pair Category 5 UTP, full duplex mode
- dot3MauType10GigBaseX
- X PCS/PMA, unknown PMD.
- dot3MauType10GigBaseLX4
- X fiber over WWDM optics
- dot3MauType10GigBaseR
- R PCS/PMA, unknown PMD.
- dot3MauType10GigBaseER
- R fiber over 1550 nm optics
- dot3MauType10GigBaseLR
- R fiber over 1310 nm optics
- dot3MauType10GigBaseSR
- R fiber over 850 nm optics
- dot3MauType10GigBaseW
- W PCS/PMA, unknown PMD.
- dot3MauType10GigBaseEW
- W fiber over 1550 nm optics
- dot3MauType10GigBaseLW
- W fiber over 1310 nm optics
- dot3MauType10GigBaseSW
- W fiber over 850 nm optics
- dot3MauType10GigBaseCX4
- X copper over 8 pair 100-Ohm balanced cable
- dot3MauType2BaseTL
- Voice grade UTP copper, up to 2700m, optional PAF
- dot3MauType10PassTS
- Voice grade UTP copper, up to 750m, optional PAF
- dot3MauType100BaseBX10D
- One single-mode fiber OLT, long wavelength, 10km
- dot3MauType100BaseBX10U
- One single-mode fiber ONU, long wavelength, 10km
- dot3MauType100BaseLX10
- Two single-mode fibers, long wavelength, 10km
- dot3MauType1000BaseBX10D
- One single-mode fiber OLT, long wavelength, 10km
- dot3MauType1000BaseBX10U
- One single-mode fiber ONU, long wavelength, 10km
- dot3MauType1000BaseLX10
- Two sigle-mode fiber, long wavelength, 10km
- dot3MauType1000BasePX10D
- One single-mode fiber EPON OLT, 10km
- dot3MauType1000BasePX10U
- One single-mode fiber EPON ONU, 10km
- dot3MauType1000BasePX20D
- One single-mode fiber EPON OLT, 20km
- dot3MauType1000BasePX20U
- One single-mode fiber EPON ONU, 20km
- dot3MauType10GbaseT
- Four-pair Category 6A or better, full duplex mode only
- dot3MauType10GbaseLRM
- R multimode fiber over 1310 nm optics
- dot3MauType1000baseKX
- X backplane, full duplex mode only
- dot3MauType10GbaseKX4
- 4 lane X backplane, full duplex mode only
- dot3MauType10GbaseKR
- R backplane, full duplex mode only
- dot3MauType10G1GbasePRXD1
- power budget (PRX10)
- dot3MauType10G1GbasePRXD2
- medium power budget (PRX20)
- dot3MauType10G1GbasePRXD3
- power budget (PRX30)
- dot3MauType10G1GbasePRXU1
- power budget (PRX10)
- dot3MauType10G1GbasePRXU2
- medium power budget (PRX20)
- dot3MauType10G1GbasePRXU3
- power budget (PRX30)
- dot3MauType10GbasePRD1
- power budget (PR10)
- dot3MauType10GbasePRD2
- medium power budget (PR20)
- dot3MauType10GbasePRD3
- power budget (PR30)
- dot3MauType10GbasePRU1
- low and medium power budget (PR10 and PR20)
- dot3MauType10GbasePRU3
- power budget (PR30)
Download IPHost Network Monitor (500 monitors for 30 days, 50 monitors free forever) to start monitoring network devices right now.
