IEEE-802DOT17-RPR-MIB

IEEE-802DOT17-RPR-MIB Download

MIBs list

First published version.

IPHost Network Monitor offer an easy way of SNMP monitoring your Cisco Servers, Routers, Switches, Bridges, Firewalls, Repeaters.

OID list for IEEE-802DOT17-RPR-MIB

rprIfTable
The RPR interface table, extension to the ifTable. All read-write attributes in this table are non-volatile, i.e. will be retained across system reset.
rprIfEntry
One such entry for every interface in the ifTable which has an ifType of RPR interface.
rprIfIndex
The ifIndex of this RPR interface.
rprIfStationsOnRing
The number of stations on the RPR ring. When the operStatus of the interface is down the value is 1.
rprIfReversionMode
The reversion mode of the MAC, False for non-revertive True for revertive. Revertive station will return to idle state after WTR interval expires. Default value for reversion mode is true.
rprIfProtectionWTR
Indicates the length of time in seconds, to remain in the protection state, after the cause of an automatic protection is removed. This mechanism prevents protection switch oscillations. Default value for WTR is 10 seconds.
rprIfProtectionFastTimer
Indicates the protection messages fast timer value in 1 ms units. The fast timer is used for protection protocols. Default value for fast timer protection messages is 10 ms.
rprIfProtectionSlowTimer
Indicates the protection slow timer value in 50 ms units. The slow timer is used for topology and protection protocols. Default value for slow timer protection and topology messages is 20 units of 50 ms, i.e. 1sec.
rprIfAtdTimer
Indicates the timer period for ATD message transmissions. Default value is 20 units of 50 ms, i.e. 1sec.
rprIfKeepaliveTimeout
Indicates the timer to declare keepalive timeout, multiples of 1 millisecond. Default value for keepalive timeout is 3 ms.
rprIfFairnessAggressive
Indicates whether the selected RPR fairness algorithm is aggressive or conservative. If true, the selected fairness mode is aggressive. If false, the selected fairness mode is conservative. The default value for fairness aggressive is true.
rprIfPtqSize
The size in bytes of the Primary Transit Queue per ringlet supported by this RPR MAC.
rprIfStqSize
The size in bytes of the Secondary Transit Queue per ringlet supported by this RPR MAC.
rprIfSTQFullThreshold
A level of STQ occupancy at or above which the STQ is almost full. This attribute specifies the full threshold location in MTU units below the STQ size. The range is [stqHighThreshold + mtuSize, sizeSTQ - mtuSize]. The default value for stqFullThreshold i ...
rprIfIdleThreshold
Indicates that a MAC is experiencing an adverse rate mismatch. When the PTQ depth exceeds this value, the incoming link is considered adversely rate mismatched. This attribute specifies the idle-threshold location from the top of the PTQ buffer, in MTU si ...
rprIfSesThreshold
Indicates the number of E-RPR errors to declare a second as SES-RPR The default value is the rounded integer of 0.000001 * (lineRate * advertisementRatio).
rprIfWrapConfig
Indicates the configured protection mode, steering or wrapping, in a MAC that supports both modes. If wrap configured bit is set, the station will perform wrap protection during ring failures. If the station detects another station on the ring that has a ...
rprIfJumboFramePreferred
Indicates the preference of the manager to support jumbo frame in a MAC that supports jumbo frame. The station advertises the 'logical and' of rprIfJumboFramePreferred and jumbo capable bit in the rprIfMacCapability. Default value for jumbo frame preferre ...
rprIfMacOperModes
The summary of the Mac operational modes. if strictOrder is set, the MAC operates in strict order mode. if dropBadFcs is set, frames with bad FCS are dropped.
rprIfRingOperModes
The summary of the ring operational modes collected through the topology discovery protocol. If at least one station doesn't support jumbo frames, the jumboFrame bit in this attribute is set to false. Only if all stations support jumbo frames, the bit is ...
rprIfCurrentStatus
Indicates the current status of the RPR interface. this attribute is used to generate alarm to the management system.
rprIfLastChange
The value of sysUpTime at the time when any of the following attributes changes: rprIfStationsOnRing, rprIfReversionMode, rprIfProtectionWTR, rprIfProtectionFastTimer, rprIfProtectionSlowTimer, rprIfAtdTimer, rprIfKeepaliveTimeout, rprIfFairnessAggressive ...
rprIfChanges
Indicates number of times rprIfLastChange changed. The discontinued counter value is indicated by the ifCounterDiscontinuityTime value.
rprIfStatsControlTable
The RPR statistics management table, controls the collection, duration, clearance, and status of the MAC statistics. The usage of this table is as follows: 1. In order to clear period of counters (or all periods) of specific counting point (or all countin ...
rprIfStatsControlEntry
One such entry for every interface in the ifTable which has an ifType of RPR interface.
rprIfStatsControlIfIndex
The ifIndex of this RPR interface.
rprIfStatsControlPeriodClear
This attribute allows for some or all of the interval statistics for this RPR MAC to be cleared. It does not affect the values of the running counters or the counter values reported through the interface MIB. clearSpecificInterval clears the interval indi ...
rprIfStatsControlCountPointClear
This attribute allows for a specific counting point of the RPR MAC or all of the RPR MAC counting points to be cleared on rprIfStatsControlPeriodClear request. Default value for Interface to clear is clearAll, i.e. clear statistics of all interfaces.
rprIfStatsControlIntervalClear
The statistics interval number to clear. The interval identified by 1 is the most recently completed 15 minute interval, and interval identified by N is the interval immediately preceding the one identified by N-1. Setting rprIfStatsControlPeriodClear to ...
rprIfStatsControlCommitClear
Sends a commit with input parameters to specify the Period (rprIfStatsControlPeriodClear), count point (rprIfStatsControlCountPointClear) and specific interval (rprIfStatsControlIntervalClear) to clear. If the clear operation succeeds this attribute will ...
rprIfStatsControlTimeElapsed
The number of seconds, including partial seconds, that have elapsed since the beginning of the current measurement interval. If, for some reason, such as an adjustment in the system's time-of-day clock, the current interval exceeds the maximum value, the ...
rprIfStatsControlValidIntervals
The number of previous 15-minute intervals for which data was collected. An RPR interface must be capable of supporting at least n intervals. The minimum value of n is 4. The default of n is 32. The maximum value of n is 96. The value will be unless t ...
rprSpanTable
The RPR interface Span table. All read-write attributes in this table are non-volatile, i.e. will be retained across system reset.
rprSpanEntry
One such entry for every span of an RPR interface.
rprSpanIfIndex
The ifIndex of this RPR interface.
rprSpanId
Indicates the span interface of the RPR MAC. Each RPR span is connected to both ringlet0 and ringlet1. The east span receives from ringlet1 and transmits through ringlet0. The west span receives from ringlet0 and transmits through ringlet1.
rprSpanLowerLayerIfIndex
The ifIndex of interface which is below the RPR layer in this span. A value of zero indicates an interface index that has yet to be determined
rprSpanTotalRingletReservedRate
The total reserved subclassA0 bandwidth on the ringlet. This variable is used by the fairness module to determine the total reclaimable bandwidth.
rprSpanCurrentStatus
Indicates the current status of the RPR span. this attribute is used to generate alarm to the management system.
rprSpanLastChange
The value of sysUpTime at the time when any of the following attributes changes: rprSpanCurrentStatus, rprSpanProtectionNeighborValid, rprSpanProtectionHoldOffTimer, rprSpanProtectionCommand, rprSpanProtectionCount.
rprSpanChanges
Indicates number of times rprSpanLastChange changed. The discontinued counter value is indicated by the ifCounterDiscontinuityTime value.
rprSpanProtectionTable
The RPR interface Span protection management table. All read-write attributes in this table are non-volatile, i.e. will be retained across system reset.
rprSpanProtectionEntry
One such entry for every span of an RPR interface.
rprSpanProtectionIfIndex
The ifIndex of this RPR interface.
rprSpanProtectionSpan
The Span for this entry.
rprSpanProtectionNeighborValid
Indicates whether the neighbor address is active or former. true value for active, false for former
rprSpanProtectionHoldOffTimer
The period that RPR gives to lower layer to perform protection, before it activates its protection mechanism. Default value of hold off timer is 0.
rprSpanProtectionCommand
The protection mode requested by management for the local station that can affect the protection status of the RPR station, according to the set of rules describing the RPR protection. When read, this object returns the last command written unless it has ...
rprSpanProtectionCount
The number of transitions from idle state to active protection state. The discontinued counter value is indicated by the ifCounterDiscontinuityTime value.
rprSpanProtectionDuration
The total amount of time protection was active on the span interface. The discontinued counter value is indicated by the ifCounterDiscontinuityTime value.
rprSpanProtectionLastActivationTime
The value of sysUpTime at the time of the last protection activation.
rprTopoImageTable
A topology map that details the list of stations on the RPR ringlets. All attributes in this table are volatile, i.e. will be cleared on system reset.
rprTopoImageEntry
Each entry contains information specific to a particular station on the ring. The table has at least one entry for the station itself, this entry indicates zero hops on each ringlet.
rprTopoImageIfIndex
The ifIndex of this RPR interface.
rprTopoImageMacAddress
The 48-bit MAC address of the station.
rprTopoImageSecMacAddress1
The 48-bit first secondary MAC address of the station. Default and unused value is FF:FF:FF:FF:FF:FF
rprTopoImageSecMacAddress2
The 48-bit second secondary MAC address of the station. Default and unused value is FF:FF:FF:FF:FF:FF
rprTopoImageStationIfIndex
The station ifIndex.
rprTopoImageStationName
The operator assigned station name.
rprTopoImageInetAddressType
Denotes the address type of the station INET address It should be set to 'unknown' if station INET address is not known.
rprTopoImageInetAddress
This object contains the value of of the station IP (v4 or V6) address. The format of this address is specified by the value of the corresponding rprTopoImageInetAddressType object. If the address type is unknown, then this object contains the zero-length ...
rprTopoImageCapability
Indicates the capabilities that the MAC supports. jumboFrames - Indicates whether the MAC capable of receiving, transmitting and transiting jumbo frames. wrapProtection - Indicates whether the MAC configured to wrap protection. supportsConservativeFairnes ...
rprTopoImageRinglet0Hops
The number of hops to this station through ringlet0. The self station is indicated with zero hops. A non reachable station is indicated with -1 value.
rprTopoImageRinglet0ReservedRate
The amount of A0 traffic that this station adds on ringlet0, in Mb/s units.
rprTopoImageRinglet1Hops
The number of hops to this station through ringlet1. The self station is indicated with zero hops. A non reachable station is indicated with -1 value.
rprTopoImageRinglet1ReservedRate
The amount of A0 traffic that this station adds on ringlet1, in Mb/s units.
rprTopoImageWestProtectionStatus
The current protection status of the West span.
rprTopoImageWestWeight
The weight of the station on the west span. used for weighted fairness.
rprTopoImageEastProtectionStatus
The current protection status of the east span.
rprTopoImageEastWeight
The weight of the station on the east span. Used for weighted fairness.
rprTopoImageStatus
Status of the station, the reachability of station through ringlet0 and ringlet1, wrap active on the station spans, events of reception frames with bad FCS, events of reception multichoke fairness frames.
rprFairnessTable
A table of RPR Fairness per RPR span. All read-write attributes in this table are non-volatile, i.e. will be retained across system reset.
rprFairnessEntry
A fairness parameters for a particular ringlet of the an RPR interface.
rprFairnessIfIndex
The ifIndex of this RPR interface.
rprFairnessRinglet
The ringlet for which this row contains information. ringlet0 is the transmission of the east span and the reception of the west span, ringlet1 is the transmission of the west span and the reception of the east span
rprFairnessRingletWeight
Weight assigned to fairness to permit the scaling of fair rate values among stations on the ringlet. This allows one station to use a larger share of available capacity than another station without violating fairness principles. The allowed range is [1, 2 ...
rprFairnessReservedRate
The amount of A0 traffic that this station adds that ringlet, in Mb/s units. Default value for A0 reserved rate is 0 Mb/s.
rprFairnessMaxAllowed
The maximum value that the station is allowed to transmit local excess traffic to the ringlet. The default value is the physical ring rate.
rprFairnessAgeCoef
The coefficient used by the aging procedure to specify the relative weights assigned to (a) the change in the value of a rate-counter during the most recent agingInterval and (b) the value of the rate-counter at the end of the previous agingInterval. The ...
rprFairnessRampCoef
The coefficient used for ramping a rate. The value is interpreted as 2 raised to the power specified by this attribute. The default value is 6, giving a low-pass coefficient of 2**6, or 64.
rprFairnessLpCoef
The coefficient used by the low-pass filter procedure to specify the relative weights applied to (a) the increase in the rate-count value during the most recent agingInterval and (b) the previous low-pass filtered rate. The former is assigned a weight of ...
rprFairnessAdvertisementRatio
The ratio between the link capacity reserved for fairness control messages and the total link capacity. Default value of fairness advertisement ratio is 5 units of 0.00025, i.e 0.00125.
rprFairnessMcffReportCoef
Indicates the number of SCFF advertisingIntervals that elapse between the sending of successive MCFFs, This value allows the interval between sending MCFFs to be established as MCFF_reportingInterval = rprFairnessMcffReportCoef * SCFF_avertisingInterval. ...
rprFairnessActiveWeightsCoef
Indicates the number of agingIntervals that elapse between successive computations of activeWeights. This value allows the interval between computations of activeWeights to be established as activeWeightsInterval = activeWeightsCoef * agingInterval. The d ...
rprFairnessSTQHighThreshold
A level of STQ occupancy at or above which CSFE frames are no longer admitted. Defined only for a dual transit-queue implementation. This attribute specifies the high threshold location in percentage of the STQ size. The allowed range is [2*mtuSize, stqFu ...
rprFairnessSTQMedThreshold
A level of buffer occupancy in a dual-queue deployment, at or above which congestion on the outbound link is declared. This attribute specifies the medium threshold location in percentage of the STQ size. The allowed range is [stqLowThreshold + mtuSize, s ...
rprFairnessSTQLowThreshold
A level of STQ occupancy at or above which congestion on the outbound link is imminent. Defined only for dual transit-queue implementations. This attribute specifies the low threshold location in percentage of the STQ size. The range is [mtuSize, stqHighT ...
rprFairnessRateHighThreshold
Rate at or above which congestion on the outbound link is declared. The range is [0.4 * unreservedRate, 0.99 * unreservedRate]. The default value is 0.95 * unreservedRate.
rprFairnessRateLowThreshold
Rate at or above which congestion on the outbound link is imminent. The range is [0.5 * rateHighThreshold, 0.99 * rateHighThreshold]. The default value is 0.9 * rateHighThreshold
rprFairnessResetWaterMarks
Write resetWaterMarks to this attribute to reset the STQ water marks to the current occupancy. Default value is idle
rprFairnessSTQHighWaterMark
The highest level of STQ occupancy since the last reset of this value, in percentage of the STQ size.
rprFairnessSTQLowWaterMark
The lowest level of STQ occupancy since the last reset of this value, in percentage of the STQ size.
rprFairnessLastChange
The value of sysUpTime at the time when any of the following attributes changes: rprFairnessRingletWeight, rprFairnessReservedRate, rprFairnessMaxAllowed, rprFairnessAgeCoef, rprFairnessRampCoef, rprFairnessLpCoef, rprFairnessAdvertisementRatio, rprFairne ...
rprFairnessChanges
Indicates number of times rprFairnessLastChange changed. The discontinued counter value is indicated by the ifCounterDiscontinuityTime value.
rprOamTable
A table of RPR OAM actions. The table is designed to support a one action at a time on an RPR interface. All read-write attributes in this table are volatile, i.e. will be cleared on system reset.
rprOamEntry
OAM Echo and Flush control for an RPR interface
rprOamIfIndex
The ifIndex of this RPR interface.
rprOamActionType
The type of OAM action. The valid values for this object are: (1) echo (2) flush.
rprOamDestAddress
The 48-bit MAC address of the destination station of OAM session.
rprOamRequestRinglet
The ringlet ID on which the OAM request should be sent.
rprOamResponseRinglet
The ringlet ID on which the OAM response should be replied.
rprOamClassOfService
The class-of-service of OAM session frames
rprOamUserData
The operator assigned user specific data.
rprOamProtected
Indicates whether the OAM action should be protected. In a wrapping ring, If true, the WE (wrap eligible) bit of the OAM action frame is set to 1. Otherwise, the WE bit is set to 0. In steering ring, If true, in case of failure on the requested ringlet be ...
rprOamRequestCount
Indicates the number of OAM requests to send. Default value of OAM request action is 1.
rprOamTimeout
Indicates the timer to declare OAM action timeout, in 10usec units. Default value of OAM timeout is 500 units of 10usec (i.e. 5 ms)
rprOamControl
Control of an OAM action. The valid values for this object are: (1) idle (2) active (3) abort. Default value of OAM control is idle.
rprOamResponseCount
Indicates the number of OAM actions responses received.
rprOamAvResponseTime
Average response time to receive the OAM reply.
rprOamResponseStatus
Status of an OAM action. The valid values for this object are: (1) unknown (2) inProcess (3) error (4) success. The action status is success if at least 90% of the responses were received till timeout.
rprIfChangeSummaryNumInterfaces
Number of RPR interfaces on this device.
rprIfChangeSummaryIfLastChange
Latest timestamp when any instance of rprIfLastChange changed.
rprIfChangeSummaryIfChanges
Number of times any instance of rprIfChanges changed. The discontinued counter value is indicated by the ifCounterDiscontinuityTime value.
rprIfChangeSummarySpanLastChange
Latest timestamp when any instance of rprSpanLastChange changed.
rprIfChangeSummarySpanChanges
Number of times any instance of rprSpanChanges changed. The discontinued counter value is indicated by the ifCounterDiscontinuityTime value.
rprIfChangeSummaryFairnessLastChange
Latest timestamp when any instance of rprFairnessLastChange changed.
rprIfChangeSummaryFairnessChanges
Number of times any instance of rprFairnessChanges changed. The discontinued counter value is indicated by the ifCounterDiscontinuityTime value.
rprSpanCountersCurrentTable
The RPR MAC Span interface current counters table. All attributes in this table are volatile, i.e. will be cleared on system reset.
rprSpanCountersCurrentEntry
Frames and octets statistics for the current interval for the RPR MAC Span interface. The corresponding instance of rprIfStatsControlTimeElapsed indicates the number of seconds which have elapsed so far in the current interval.
rprSpanCurrentIfIndex
The ifIndex of this RPR interface.
rprSpanCurrentSpan
An indication of the span of the interface for which this row contains information.
rprSpanCurrentInUcastClassAFrames
The number of received (PHY to MAC) classA unicast frames in the current interval.
rprSpanCurrentInUcastClassAOctets
The number of received (PHY to MAC) classA unicast octets, in the current interval.
rprSpanCurrentInUcastClassBCirFrames
The number of received (PHY to MAC) classB CIR unicast frames in the current interval.
rprSpanCurrentInUcastClassBCirOctets
The number of received (PHY to MAC) classB CIR unicast octets in the current interval.
rprSpanCurrentInUcastClassBEirFrames
The number of received (PHY to MAC) classB EIR unicast frames in the current interval.
rprSpanCurrentInUcastClassBEirOctets
The number of received (PHY to MAC) classB EIR unicast octets in the current interval.
rprSpanCurrentInUcastClassCFrames
The number of received (PHY to MAC) classC unicast frames in the current interval.
rprSpanCurrentInUcastClassCOctets
The number of received (PHY to MAC) classC unicast octets in the current interval.
rprSpanCurrentInMcastClassAFrames
The number of received (PHY to MAC) classA multicast and broadcast frames in the current interval.
rprSpanCurrentInMcastClassAOctets
The number of received (PHY to MAC) classA multicast and broadcast octets in the current interval.
rprSpanCurrentInMcastClassBCirFrames
The number of received (PHY to MAC) classB CIR multicast and broadcast frames in the current interval.
rprSpanCurrentInMcastClassBCirOctets
The number of received (PHY to MAC) classB CIR multicast and broadcast octets in the current interval.
rprSpanCurrentInMcastClassBEirFrames
The number of received (PHY to MAC) classB EIR multicast and broadcast frames in the current interval.
rprSpanCurrentInMcastClassBEirOctets
The number of received (PHY to MAC) classB EIR multicast and broadcast octets in the current interval.
rprSpanCurrentInMcastClassCFrames
The number of received (PHY to MAC) classC multicast and broadcast frames in the current interval.
rprSpanCurrentInMcastClassCOctets
The number of received (PHY to MAC) classC multicast and broadcast octets in the current interval.
rprSpanCurrentOutUcastClassAFrames
The number of transmitted (MAC to PHY) classA unicast frames in the current interval.
rprSpanCurrentOutUcastClassAOctets
The number of transmitted (MAC to PHY) classA unicast octets in the current interval.
rprSpanCurrentOutUcastClassBCirFrames
The number of transmitted (MAC to PHY) classB CIR unicast frames in the current interval.
rprSpanCurrentOutUcastClassBCirOctets
The number of transmitted (MAC to PHY) classB CIR unicast octets in the current interval.
rprSpanCurrentOutUcastClassBEirFrames
The number of transmitted (MAC to PHY) classB EIR unicast frames in the current interval.
rprSpanCurrentOutUcastClassBEirOctets
The number of transmitted (MAC to PHY) classB EIR unicast octets in the current interval.
rprSpanCurrentOutUcastClassCFrames
The number of transmitted (MAC to PHY) classC unicast frames in the current interval.
rprSpanCurrentOutUcastClassCOctets
The number of transmitted (MAC to PHY) classC unicast octets in the current interval.
rprSpanCurrentOutMcastClassAFrames
The number of transmitted (MAC to PHY) classA multicast and broadcast frames in the current interval.
rprSpanCurrentOutMcastClassAOctets
The number of transmitted (MAC to PHY) classA multicast and broadcast octets in the current interval.
rprSpanCurrentOutMcastClassBCirFrames
The number of transmitted (MAC to PHY) classB CIR multicast and broadcast frames in the current interval.
rprSpanCurrentOutMcastClassBCirOctets
The number of transmitted (MAC to PHY) classB CIR multicast and broadcast octets in the current interval.
rprSpanCurrentOutMcastClassBEirFrames
The number of transmitted (MAC to PHY) classB EIR multicast and broadcast frames in the current interval.
rprSpanCurrentOutMcastClassBEirOctets
The number of transmitted (MAC to PHY) classB EIR multicast and broadcast octets in the current interval.
rprSpanCurrentOutMcastClassCFrames
The number of transmitted (MAC to PHY) classC multicast and broadcast frames in the current interval.
rprSpanCurrentOutMcastClassCOctets
The number of transmitted (MAC to PHY) classC multicast and broadcast octets in the current interval.
rprSpanCountersIntervalTable
The RPR MAC Span interface interval counters table. All attributes in this table are volatile, i.e. will be cleared on system reset.
rprSpanCountersIntervalEntry
Frames and octets statistics collected for a particular interval for the RPR MAC Span interface of a particular span of a particular RPR interface. The corresponding instance of rprIfValidIntervals indicates the number of intervals for which the set of st ...
rprSpanIntervalIfIndex
The ifIndex of this RPR interface.
rprSpanIntervalSpan
An indication of the span of the interface for which this row contains information.
rprSpanIntervalNumber
A number between 1 and 96, which identifies the intervals for which the set of statistics is available. The interval identified by 1 is the most recently completed 15 minute interval, and interval identified by N is the interval immediately preceding the ...
rprSpanIntervalValidData
This variable indicates if the data for this interval is valid. It will be valid if it contains data for 900 seconds plus or minus 10 seconds.
rprSpanIntervalTimeElapsed
The duration of a particular interval in seconds. If, for some reason, such as an adjustment in the system's time-of-day clock, the current interval exceeds the maximum value, the agent will return the maximum value.
rprSpanIntervalStartTime
Indicates the wall clock time that this interval started.
rprSpanIntervalInUcastClassAFrames
The number of received (PHY to MAC) classA unicast frames in a particular interval in the past 24 hours.
rprSpanIntervalInUcastClassAOctets
The number of received (PHY to MAC) classA unicast octets in a particular interval in the past 24 hours.
rprSpanIntervalInUcastClassBCirFrames
The number of received (PHY to MAC) classB CIR unicast frames in a particular interval in the past 24 hours.
rprSpanIntervalInUcastClassBCirOctets
The number of received (PHY to MAC) classB CIR unicast octets in a particular interval in the past 24 hours.
rprSpanIntervalInUcastClassBEirFrames
The number of received (PHY to MAC) classB EIR unicast frames in a particular interval in the past 24 hours.
rprSpanIntervalInUcastClassBEirOctets
The number of received (PHY to MAC) classB EIR unicast octets in a particular interval in the past 24 hours.
rprSpanIntervalInUcastClassCFrames
The number of received (PHY to MAC) classC unicast frames in a particular interval in the past 24 hours.
rprSpanIntervalInUcastClassCOctets
The number of received (PHY to MAC) classC unicast octets in a particular interval in the past 24 hours.
rprSpanIntervalInMcastClassAFrames
The number of received (PHY to MAC) classA multicast and broadcast frames in a particular interval in the past 24 hours.
rprSpanIntervalInMcastClassAOctets
The number of received (PHY to MAC) classA multicast and broadcast octets in a particular interval in the past 24 hours.
rprSpanIntervalInMcastClassBCirFrames
The number of received (PHY to MAC) classB CIR multicast and broadcast frames in a particular interval in the past 24 hours.
rprSpanIntervalInMcastClassBCirOctets
The number of received (PHY to MAC) classB CIR multicast and broadcast octets in a particular interval in the past 24 hours.
rprSpanIntervalInMcastClassBEirFrames
The number of received (PHY to MAC) classB EIR multicast and broadcast frames in a particular interval in the past 24 hours.
rprSpanIntervalInMcastClassBEirOctets
The number of received (PHY to MAC) classB EIR multicast and broadcast octets in a particular interval in the past 24 hours.
rprSpanIntervalInMcastClassCFrames
The number of received (PHY to MAC) classC multicast and broadcast frames in a particular interval in the past 24 hours.
rprSpanIntervalInMcastClassCOctets
The number of received (PHY to MAC) classC multicast and broadcast octets in a particular interval in the past 24 hours.
rprSpanIntervalOutUcastClassAFrames
The number of transmitted (MAC to PHY) classA unicast frames in a particular interval in the past 24 hours.
rprSpanIntervalOutUcastClassAOctets
The number of transmitted (MAC to PHY) classA unicast octets in a particular interval in the past 24 hours.
rprSpanIntervalOutUcastClassBCirFrames
The number of transmitted (MAC to PHY) classB CIR unicast frames, in a particular interval in the past 24 hours.
rprSpanIntervalOutUcastClassBCirOctets
The number of transmitted (MAC to PHY) classB CIR unicast octets in a particular interval in the past 24 hours.
rprSpanIntervalOutUcastClassBEirFrames
The number of transmitted (MAC to PHY) classB EIR unicast frames in a particular interval in the past 24 hours.
rprSpanIntervalOutUcastClassBEirOctets
The number of transmitted (MAC to PHY) classB EIR unicast octets in a particular interval in the past 24 hours.
rprSpanIntervalOutUcastClassCFrames
The number of transmitted (MAC to PHY) classC unicast frames in a particular interval in the past 24 hours.
rprSpanIntervalOutUcastClassCOctets
The number of transmitted (MAC to PHY) classC unicast octets in a particular interval in the past 24 hours.
rprSpanIntervalOutMcastClassAFrames
The number of transmitted (MAC to PHY) classA multicast and broadcast frames in a particular interval in the past 24 hours.
rprSpanIntervalOutMcastClassAOctets
The number of transmitted (MAC to PHY) classA multicast and broadcast octets in a particular interval in the past 24 hours.
rprSpanIntervalOutMcastClassBCirFrames
The number of transmitted (MAC to PHY) classB CIR multicast and broadcast frames in a particular interval in the past 24 hours.
rprSpanIntervalOutMcastClassBCirOctets
The number of transmitted (MAC to PHY) classB CIR multicast and broadcast octets in a particular interval in the past 24 hours.
rprSpanIntervalOutMcastClassBEirFrames
The number of transmitted (MAC to PHY) classB EIR multicast and broadcast frames in a particular interval in the past 24 hours.
rprSpanIntervalOutMcastClassBEirOctets
The number of transmitted (MAC to PHY) classB EIR multicast and broadcast octets in a particular interval in the past 24 hours.
rprSpanIntervalOutMcastClassCFrames
The number of transmitted (MAC to PHY) classC multicast and broadcast frames in a particular interval in the past 24 hours.
rprSpanIntervalOutMcastClassCOctets
The number of transmitted (MAC to PHY) classC multicast and broadcast octets in a particular interval in the past 24 hours.
rprSpanCountersDayTable
The RPR Mac Span Day Table contains the cumulative sum of the various statistics for the 24 hour period preceding the current interval. All attributes in this table are volatile, i.e. will be cleared on system reset.
rprSpanCountersDayEntry
An entry in the RPR Span Day table.
rprSpanDayIfIndex
The ifIndex of this RPR interface.
rprSpanDaySpan
An indication of the span of the interface for which this row contains information.
rprSpanDayInUcastClassAFrames
The number of received (PHY to MAC) classA unicast frames.
rprSpanDayInUcastClassAOctets
The number of received (PHY to MAC) classA unicast octets.
rprSpanDayInUcastClassBCirFrames
The number of received (PHY to MAC) classB CIR unicast frames.
rprSpanDayInUcastClassBCirOctets
The number of received (PHY to MAC) classB CIR unicast octets.
rprSpanDayInUcastClassBEirFrames
The number of received (PHY to MAC) classB EIR unicast frames.
rprSpanDayInUcastClassBEirOctets
The number of received (PHY to MAC) classB EIR unicast octets.
rprSpanDayInUcastClassCFrames
The number of received (PHY to MAC) classC unicast frames.
rprSpanDayInUcastClassCOctets
The number of received (PHY to MAC) classC unicast octets.
rprSpanDayInMcastClassAFrames
The number of received (PHY to MAC) classA multicast and broadcast frames
rprSpanDayInMcastClassAOctets
The number of received (PHY to MAC) classA multicast and broadcast octets
rprSpanDayInMcastClassBCirFrames
The number of received (PHY to MAC) classB CIR multicast and broadcast frames
rprSpanDayInMcastClassBCirOctets
The number of received (PHY to MAC) classB CIR multicast and broadcast octets
rprSpanDayInMcastClassBEirFrames
The number of received (PHY to MAC) classB EIR multicast and broadcast frames
rprSpanDayInMcastClassBEirOctets
The number of received (PHY to MAC) classB EIR multicast and broadcast octets
rprSpanDayInMcastClassCFrames
The number of received (PHY to MAC) classC multicast and broadcast frames
rprSpanDayInMcastClassCOctets
The number of received (PHY to MAC) classC multicast and broadcast octets
rprSpanDayOutUcastClassAFrames
The number of transmitted (MAC to PHY) classA unicast frames.
rprSpanDayOutUcastClassAOctets
The number of transmitted (MAC to PHY) classA unicast octets.
rprSpanDayOutUcastClassBCirFrames
The number of transmitted (MAC to PHY) classB CIR unicast frames.
rprSpanDayOutUcastClassBCirOctets
The number of transmitted (MAC to PHY) classB CIR unicast octets.
rprSpanDayOutUcastClassBEirFrames
The number of transmitted (MAC to PHY) classB EIR unicast frames
rprSpanDayOutUcastClassBEirOctets
The number of transmitted (MAC to PHY) classB EIR unicast octets
rprSpanDayOutUcastClassCFrames
The number of transmitted (MAC to PHY) classC unicast frames
rprSpanDayOutUcastClassCOctets
The number of transmitted (MAC to PHY) classC unicast octets
rprSpanDayOutMcastClassAFrames
The number of transmitted (MAC to PHY) classA multicast and broadcast frames.
rprSpanDayOutMcastClassAOctets
The number of transmitted (MAC to PHY) classA multicast and broadcast octets.
rprSpanDayOutMcastClassBCirFrames
The number of transmitted (MAC to PHY) classB CIR multicast and broadcast frames.
rprSpanDayOutMcastClassBCirOctets
The number of transmitted (MAC to PHY) classB CIR multicast and broadcast octets.
rprSpanDayOutMcastClassBEirFrames
The number of transmitted (MAC to PHY) classB EIR multicast and broadcast frames.
rprSpanDayOutMcastClassBEirOctets
The number of transmitted (MAC to PHY) classB EIR multicast and broadcast octets.
rprSpanDayOutMcastClassCFrames
The number of transmitted (MAC to PHY) classC multicast and broadcast frames.
rprSpanDayOutMcastClassCOctets
The number of transmitted (MAC to PHY) classC multicast and broadcast octets.
rprSpanCountersStatsTable
The RPR Mac Span interface total counters table. The DiscontinuityTime for this table is indicated by ifCounterDiscontinuityTime defined in ifXTable. All attributes in this table are volatile, i.e. will be cleared on system reset.
rprSpanCountersStatsEntry
An entry in the span stats table.
rprSpanStatsIfIndex
The ifIndex of this RPR interface.
rprSpanStatsSpan
An indication of the span of the interface for which this row contains information.
rprSpanStatsInUcastClassAFrames
The number of received (PHY to MAC) classA unicast frames.
rprSpanStatsInUcastClassAOctets
The number of received (PHY to MAC) classA unicast octets.
rprSpanStatsInUcastClassBCirFrames
The number of received (PHY to MAC) classB CIR unicast frames.
rprSpanStatsInUcastClassBCirOctets
The number of received (PHY to MAC) classB CIR unicast octets.
rprSpanStatsInUcastClassBEirFrames
The number of received (PHY to MAC) classB EIR unicast frames.
rprSpanStatsInUcastClassBEirOctets
The number of received (PHY to MAC) classB EIR unicast octets.
rprSpanStatsInUcastClassCFrames
The number of received (PHY to MAC) classC unicast frames.
rprSpanStatsInUcastClassCOctets
The number of received (PHY to MAC) classC unicast octets.
rprSpanStatsInMcastClassAFrames
The number of received (PHY to MAC) classA multicast and broadcast frames
rprSpanStatsInMcastClassAOctets
The number of received (PHY to MAC) classA multicast and broadcast octets
rprSpanStatsInMcastClassBCirFrames
The number of received (PHY to MAC) classB CIR multicast and broadcast frames
rprSpanStatsInMcastClassBCirOctets
The number of received (PHY to MAC) classB CIR multicast and broadcast octets
rprSpanStatsInMcastClassBEirFrames
The number of received (PHY to MAC) classB EIR multicast and broadcast frames
rprSpanStatsInMcastClassBEirOctets
The number of received (PHY to MAC) classB EIR multicast and broadcast octets
rprSpanStatsInMcastClassCFrames
The number of received (PHY to MAC) classC multicast and broadcast frames
rprSpanStatsInMcastClassCOctets
The number of received (PHY to MAC) classC multicast and broadcast octets
rprSpanStatsInCtrlFrames
The number of received (PHY to MAC) control frames processed by this MAC. This does not include control frames in transit, i.e. a multicast control frame received from a ringlet will be counted as In but not Out. This does not include Fairness or idle fra ...
rprSpanStatsInOamEchoFrames
The number of received (PHY to MAC) OAM echo frames processed by this MAC.
rprSpanStatsInOamFlushFrames
The number of received (PHY to MAC) OAM flush frames processed by this MAC.
rprSpanStatsInOamOrgFrames
The number of received (PHY to MAC) OAM Org frames processed by this MAC.
rprSpanStatsInTopoAtdFrames
The number of received (PHY to MAC) Topology ATD frames processed by this MAC.
rprSpanStatsInTopoChkSumFrames
The number of received (PHY to MAC) topology checksum frames processed by this MAC.
rprSpanStatsInTopoTpFrames
The number of received (PHY to MAC) topology TP frames processed by this MAC.
rprSpanStatsOutUcastClassAFrames
The number of transmitted (MAC to PHY) classA unicast frames.
rprSpanStatsOutUcastClassAOctets
The number of transmitted (MAC to PHY) classA unicast octets.
rprSpanStatsOutUcastClassBCirFrames
The number of transmitted (MAC to PHY) classB CIR unicast frames.
rprSpanStatsOutUcastClassBCirOctets
The number of transmitted (MAC to PHY) classB CIR unicast octets.
rprSpanStatsOutUcastClassBEirFrames
The number of transmitted (MAC to PHY) classB EIR unicast frames
rprSpanStatsOutUcastClassBEirOctets
The number of transmitted (MAC to PHY) classB EIR unicast octets
rprSpanStatsOutUcastClassCFrames
The number of transmitted (MAC to PHY) classC unicast frames
rprSpanStatsOutUcastClassCOctets
The number of transmitted (MAC to PHY) classC unicast octets
rprSpanStatsOutMcastClassAFrames
The number of transmitted (MAC to PHY) classA multicast and broadcast frames.
rprSpanStatsOutMcastClassAOctets
The number of transmitted (MAC to PHY) classA multicast and broadcast octets.
rprSpanStatsOutMcastClassBCirFrames
The number of transmitted (MAC to PHY) classB CIR multicast and broadcast frames.
rprSpanStatsOutMcastClassBCirOctets
The number of transmitted (MAC to PHY) classB CIR multicast and broadcast octets.
rprSpanStatsOutMcastClassBEirFrames
The number of transmitted (MAC to PHY) classB EIR multicast and broadcast frames.
rprSpanStatsOutMcastClassBEirOctets
The number of transmitted (MAC to PHY) classB EIR multicast and broadcast octets.
rprSpanStatsOutMcastClassCFrames
The number of transmitted (MAC to PHY) classC multicast and broadcast frames.
rprSpanStatsOutMcastClassCOctets
The number of transmitted (MAC to PHY) classC multicast and broadcast octets.
rprSpanStatsOutCtrlFrames
The number of transmitted (MAC to PHY) control frames generated by this MAC. This does not include control frames in transit, i.e. a multicast control frame received from a ringlet will be counted as In but not Out. This does not include Fairness or idle ...
rprSpanStatsOutOamEchoFrames
The number of transmitted (MAC to PHY) OAM echo frames generated by this MAC.
rprSpanStatsOutOamFlushFrames
The number of transmitted (MAC to PHY) OAM flush frames generated by this MAC.
rprSpanStatsOutOamOrgFrames
The number of transmitted (MAC to PHY) OAM Org frames generated by this MAC.
rprSpanStatsOutTopoAtdFrames
The number of transmitted (MAC to PHY) topology ATD frames generated by this MAC.
rprSpanStatsOutTopoChkSumFrames
The number of transmitted (MAC to PHY) topology checksum frames generated by this MAC.
rprSpanStatsOutTopoTpFrames
The number of transmitted (MAC to PHY) topology TP frames generated by this MAC.
rprClientCountersCurrentTable
The local station traffic current counters table. All attributes in this table are volatile, i.e. will be cleared on system reset.
rprClientCountersCurrentEntry
Frames and octets statistics for the current interval for the local station traffic of a particular RPR client interface. The corresponding instance of rprIfTimeElapsed indicates the number of seconds which have elapsed so far in the current interval.
rprClientCurrentIfIndex
The ifIndex of this RPR interface.
rprClientCurrentInUcastClassAFrames
The number of MAC to client classA unicast frames in the current interval.
rprClientCurrentInUcastClassAOctets
The number of MAC to client classA unicast octets in the current interval.
rprClientCurrentInUcastClassBCirFrames
The number of MAC to client classB CIR unicast frames in the current interval.
rprClientCurrentInUcastClassBCirOctets
The number of MAC to client classB CIR unicast octets in the current interval.
rprClientCurrentInUcastClassBEirFrames
The number of MAC to client classB EIR unicast frames in the current interval.
rprClientCurrentInUcastClassBEirOctets
The number of MAC to client classB EIR unicast octets in the current interval.
rprClientCurrentInUcastClassCFrames
The number of MAC to client classC unicast frames in the current interval.
rprClientCurrentInUcastClassCOctets
The number of MAC to client classC unicast octets in the current interval.
rprClientCurrentInMcastClassAFrames
The number of MAC to client classA multicast and broadcast frames in the current interval.
rprClientCurrentInMcastClassAOctets
The number of MAC to client classA multicast and broadcast octets in the current interval.
rprClientCurrentInMcastClassBCirFrames
The number of MAC to client classB CIR multicast and broadcast frames in the current interval.
rprClientCurrentInMcastClassBCirOctets
The number of MAC to client classB CIR multicast and broadcast octets in the current interval.
rprClientCurrentInMcastClassBEirFrames
The number of MAC to client classB EIR multicast and broadcast frames in the current interval.
rprClientCurrentInMcastClassBEirOctets
The number of MAC to client classB EIR multicast and broadcast octets in the current interval.
rprClientCurrentInMcastClassCFrames
The number of MAC to client classC multicast and broadcast frames in the current interval.
rprClientCurrentInMcastClassCOctets
The number of MAC to client classC multicast and broadcast octets in the current interval.
rprClientCurrentOutUcastClassAFrames
The number of client to MAC classA unicast frames in the current interval.
rprClientCurrentOutUcastClassAOctets
The number of client to MAC classA unicast octets in the current interval.
rprClientCurrentOutUcastClassBCirFrames
The number of client to MAC classB CIR unicast frames in the current interval.
rprClientCurrentOutUcastClassBCirOctets
The number of client to MAC classB CIR unicast octets in the current interval.
rprClientCurrentOutUcastClassBEirFrames
The number of client to MAC classB EIR unicast frames in the current interval.
rprClientCurrentOutUcastClassBEirOctets
The number of client to MAC classB EIR unicast octets in the current interval.
rprClientCurrentOutUcastClassCFrames
The number of client to MAC classC unicast frames in the current interval.
rprClientCurrentOutUcastClassCOctets
The number of client to MAC classC unicast octets in the current interval.
rprClientCurrentOutMcastClassAFrames
The number of client to MAC classA multicast and broadcast frames in the current interval.
rprClientCurrentOutMcastClassAOctets
The number of client to MAC classA multicast and broadcast octets in the current interval.
rprClientCurrentOutMcastClassBCirFrames
The number of client to MAC classB CIR multicast and broadcast frames in the current interval.
rprClientCurrentOutMcastClassBCirOctets
The number of client to MAC classB CIR multicast and broadcast octets in the current interval.
rprClientCurrentOutMcastClassBEirFrames
The number of client to MAC classB EIR multicast and broadcast frames in the current interval.
rprClientCurrentOutMcastClassBEirOctets
The number of client to MAC classB EIR multicast and broadcast octets in the current interval.
rprClientCurrentOutMcastClassCFrames
The number of client to MAC classC multicast and broadcast frames in the current interval.
rprClientCurrentOutMcastClassCOctets
The number of client to MAC classC multicast and broadcast octets in the current interval.
rprClientCountersIntervalTable
The local station traffic interval counters table. All attributes in this table are volatile, i.e. will be cleared on system reset.
rprClientCountersIntervalEntry
Frames and octets statistics collected for a particular interval for local station traffic of a particular RPR interface. The corresponding instance of rprIfValidIntervals indicates the number of intervals for which the set of statistics is available.
rprClientIntervalIfIndex
The ifIndex of this RPR interface.
rprClientIntervalNumber
A number between 1 and 96, which identifies the interval for which the set of statistics is available. The interval identified by 1 is the most recently completed 15 minute interval, and interval identified by N is the interval immediately preceding the o ...
rprClientIntervalValidData
This variable indicates if the data for this interval is valid. It will be valid if it contains data for 900 seconds plus or minus 10 seconds.
rprClientIntervalTimeElapsed
The duration of a particular interval in seconds. If, for some reason, such as an adjustment in the system's time-of-day clock, the current interval exceeds the maximum value, the agent will return the maximum value.
rprClientIntervalInUcastClassAFrames
The number of MAC to client classA unicast frames in a particular interval in the past 24 hours.
rprClientIntervalInUcastClassAOctets
The number of MAC to client classA unicast octets in a particular interval in the past 24 hours.
rprClientIntervalInUcastClassBCirFrames
The number of MAC to client classB CIR unicast frames in a particular interval in the past 24 hours.
rprClientIntervalInUcastClassBCirOctets
The number of MAC to client classB CIR unicast octets in a particular interval in the past 24 hours.
rprClientIntervalInUcastClassBEirFrames
The number of MAC to client classB EIR unicast frames in a particular interval in the past 24 hours.
rprClientIntervalInUcastClassBEirOctets
The number of MAC to client classB EIR unicast octets in a particular interval in the past 24 hours.
rprClientIntervalInUcastClassCFrames
The number of MAC to client classC unicast frames in a particular interval in the past 24 hours.
rprClientIntervalInUcastClassCOctets
The number of MAC to client classC unicast octets in a particular interval in the past 24 hours.
rprClientIntervalInMcastClassAFrames
The number of MAC to client classA multicast and broadcast frames in a particular interval in the past 24 hours.
rprClientIntervalInMcastClassAOctets
The number of MAC to client classA multicast and broadcast octets in a particular interval in the past 24 hours.
rprClientIntervalInMcastClassBCirFrames
The number of MAC to client classB CIR multicast and broadcast frames in a particular interval in the past 24 hours.
rprClientIntervalInMcastClassBCirOctets
The number of MAC to client classB CIR multicast and broadcast octets in a particular interval in the past 24 hours.
rprClientIntervalInMcastClassBEirFrames
The number of MAC to client classB EIR multicast and broadcast frames in a particular interval in the past 24 hours.
rprClientIntervalInMcastClassBEirOctets
The number of MAC to client classB EIR multicast and broadcast octets in a particular interval in the past 24 hours.
rprClientIntervalInMcastClassCFrames
The number of MAC to client classC multicast and broadcast frames in a particular interval in the past 24 hours.
rprClientIntervalInMcastClassCOctets
The number of MAC to client classC multicast and broadcast octets in a particular interval in the past 24 hours.
rprClientIntervalOutUcastClassAFrames
The number of client to MAC classA unicast frames in a particular interval in the past 24 hours.
rprClientIntervalOutUcastClassAOctets
The number of client to MAC classA unicast octets in a particular interval in the past 24 hours.
rprClientIntervalOutUcastClassBCirFrames
The number of client to MAC classB CIR unicast frames in a particular interval in the past 24 hours.
rprClientIntervalOutUcastClassBCirOctets
The number of client to MAC classB CIR unicast octets in a particular interval in the past 24 hours.
rprClientIntervalOutUcastClassBEirFrames
The number of client to MAC classB EIR unicast frames in a particular interval in the past 24 hours.
rprClientIntervalOutUcastClassBEirOctets
The number of client to MAC classB EIR unicast octets in a particular interval in the past 24 hours.
rprClientIntervalOutUcastClassCFrames
The number of client to MAC classC unicast frames in a particular interval in the past 24 hours.
rprClientIntervalOutUcastClassCOctets
The number of client to MAC classC unicast octets in a particular interval in the past 24 hours.
rprClientIntervalOutMcastClassAFrames
The number of client to MAC classA multicast and broadcast frames in a particular interval in the past 24 hours.
rprClientIntervalOutMcastClassAOctets
The number of client to MAC classA multicast and broadcast octets in a particular interval in the past 24 hours.
rprClientIntervalOutMcastClassBCirFrames
The number of client to MAC classB CIR multicast and broadcast frames in a particular interval in the past 24 hours.
rprClientIntervalOutMcastClassBCirOctets
The number of client to MAC classB CIR multicast and broadcast octets in a particular interval in the past 24 hours.
rprClientIntervalOutMcastClassBEirFrames
The number of client to MAC classB EIR multicast and broadcast frames in a particular interval in the past 24 hours.
rprClientIntervalOutMcastClassBEirOctets
The number of client to MAC classB EIR multicast and broadcast octets in a particular interval in the past 24 hours.
rprClientIntervalOutMcastClassCFrames
The number of client to MAC classC multicast and broadcast frames in a particular interval in the past 24 hours.
rprClientIntervalOutMcastClassCOctets
The number of client to MAC classC multicast and broadcast octets in a particular interval in the past 24 hours.
rprClientCountersDayTable
The RPR Mac Client Day Table contains the cumulative sum of the various statistics for the 24 hour period preceding the current interval. All attributes in this table are volatile, i.e. will be cleared on system reset.
rprClientCountersDayEntry
An entry in the RPR Client Day table.
rprClientDayIfIndex
The ifIndex of this RPR interface.
rprClientDayInUcastClassAFrames
The number of MAC to client classA unicast frames.
rprClientDayInUcastClassAOctets
The number of MAC to client classA unicast octets.
rprClientDayInUcastClassBCirFrames
The number of MAC to client classB CIR unicast frames.
rprClientDayInUcastClassBCirOctets
The number of MAC to client classB CIR unicast octets.
rprClientDayInUcastClassBEirFrames
The number of MAC to client classB EIR unicast frames.
rprClientDayInUcastClassBEirOctets
The number of MAC to client classB EIR unicast octets.
rprClientDayInUcastClassCFrames
The number of MAC to client classC unicast frames.
rprClientDayInUcastClassCOctets
The number of MAC to client classC unicast octets.
rprClientDayInMcastClassAFrames
The number of MAC to client classA multicast and broadcast frames
rprClientDayInMcastClassAOctets
The number of MAC to client classA multicast and broadcast octets
rprClientDayInMcastClassBCirFrames
The number of MAC to client classB CIR multicast and broadcast frames
rprClientDayInMcastClassBCirOctets
The number of MAC to client classB CIR multicast and broadcast octets
rprClientDayInMcastClassBEirFrames
The number of MAC to client classB EIR multicast and broadcast frames
rprClientDayInMcastClassBEirOctets
The number of MAC to client classB EIR multicast and broadcast octets
rprClientDayInMcastClassCFrames
The number of MAC to client classC multicast and broadcast frames
rprClientDayInMcastClassCOctets
The number of MAC to client classC multicast and broadcast octets
rprClientDayOutUcastClassAFrames
The number of client to MAC classA unicast frames.
rprClientDayOutUcastClassAOctets
The number of client to MAC classA unicast octets.
rprClientDayOutUcastClassBCirFrames
The number of client to MAC classB CIR unicast frames.
rprClientDayOutUcastClassBCirOctets
The number of client to MAC classB CIR unicast octets.
rprClientDayOutUcastClassBEirFrames
The number of client to MAC classB EIR unicast frames
rprClientDayOutUcastClassBEirOctets
The number of client to MAC classB EIR unicast octets
rprClientDayOutUcastClassCFrames
The number of client to MAC classC unicast frames
rprClientDayOutUcastClassCOctets
The number of client to MAC classC unicast octets
rprClientDayOutMcastClassAFrames
The number of client to MAC classA multicast and broadcast frames.
rprClientDayOutMcastClassAOctets
The number of client to MAC classA multicast and broadcast octets.
rprClientDayOutMcastClassBCirFrames
The number of client to MAC classB CIR multicast and broadcast frames.
rprClientDayOutMcastClassBCirOctets
The number of client to MAC classB CIR multicast and broadcast octets.
rprClientDayOutMcastClassBEirFrames
The number of client to MAC classB EIR multicast and broadcast frames.
rprClientDayOutMcastClassBEirOctets
The number of client to MAC classB EIR multicast and broadcast octets.
rprClientDayOutMcastClassCFrames
The number of client to MAC classC multicast and broadcast frames.
rprClientDayOutMcastClassCOctets
The number of client to MAC classC multicast and broadcast octets.
rprClientCountersStatsTable
The local station traffic total counters table. The DiscontinuityTime for this table is indicated by ifCounterDiscontinuityTime defined in ifXTable. All attributes in this table are volatile, i.e. will be cleared on system reset.
rprClientCountersStatsEntry
An entry in the span stats table.
rprClientStatsIfIndex
The ifIndex of this RPR interface.
rprClientStatsInUcastClassAFrames
The number of MAC to client classA unicast frames.
rprClientStatsInUcastClassAOctets
The number of MAC to client classA unicast octets.
rprClientStatsInUcastClassBCirFrames
The number of MAC to client classB CIR unicast frames.
rprClientStatsInUcastClassBCirOctets
The number of MAC to client classB CIR unicast octets.
rprClientStatsInUcastClassBEirFrames
The number of MAC to client classB EIR unicast frames.
rprClientStatsInUcastClassBEirOctets
The number of MAC to client classB EIR unicast octets.
rprClientStatsInUcastClassCFrames
The number of MAC to client classC unicast frames.
rprClientStatsInUcastClassCOctets
The number of MAC to client classC unicast octets.
rprClientStatsInMcastClassAFrames
The number of MAC to client classA multicast and broadcast frames
rprClientStatsInMcastClassAOctets
The number of MAC to client classA multicast and broadcast octets
rprClientStatsInMcastClassBCirFrames
The number of MAC to client classB CIR multicast and broadcast frames
rprClientStatsInMcastClassBCirOctets
The number of MAC to client classB CIR multicast and broadcast octets
rprClientStatsInMcastClassBEirFrames
The number of MAC to client classB EIR multicast and broadcast frames
rprClientStatsInMcastClassBEirOctets
The number of MAC to client classB EIR multicast and broadcast octets
rprClientStatsInMcastClassCFrames
The number of MAC to client classC multicast and broadcast frames
rprClientStatsInMcastClassCOctets
The number of MAC to client classC multicast and broadcast octets
rprClientStatsInBcastFrames
The number of MAC to client broadcast frames. This is used only when deriving the multicast and broadcast packet counters for the interface MIB.
rprClientStatsOutUcastClassAFrames
The number of client to MAC classA unicast frames.
rprClientStatsOutUcastClassAOctets
The number of client to MAC classA unicast octets.
rprClientStatsOutUcastClassBCirFrames
The number of client to MAC classB CIR unicast frames.
rprClientStatsOutUcastClassBCirOctets
The number of client to MAC classB CIR unicast octets.
rprClientStatsOutUcastClassBEirFrames
The number of client to MAC classB EIR unicast frames
rprClientStatsOutUcastClassBEirOctets
The number of client to MAC classB EIR unicast octets
rprClientStatsOutUcastClassCFrames
The number of client to MAC classC unicast frames
rprClientStatsOutUcastClassCOctets
The number of client to MAC classC unicast octets
rprClientStatsOutMcastClassAFrames
The number of client to MAC classA multicast and broadcast frames.
rprClientStatsOutMcastClassAOctets
The number of client to MAC classA multicast and broadcast octets.
rprClientStatsOutMcastClassBCirFrames
The number of client to MAC classB CIR multicast and broadcast frames.
rprClientStatsOutMcastClassBCirOctets
The number of client to MAC classB CIR multicast and broadcast octets.
rprClientStatsOutMcastClassBEirFrames
The number of client to MAC classB EIR multicast and broadcast frames.
rprClientStatsOutMcastClassBEirOctets
The number of client to MAC classB EIR multicast and broadcast octets.
rprClientStatsOutMcastClassCFrames
The number of client to MAC classC multicast and broadcast frames.
rprClientStatsOutMcastClassCOctets
The number of client to MAC classC multicast and broadcast octets.
rprClientStatsOutBcastFrames
The number of client to MAC broadcast frames. This is used only when deriving the multicast and broadcast packet counters for the interface MIB.
rprSpanErrorCountersCurrentTable
The RPR Errors Current counters table. All attributes in this table are volatile, i.e. will be cleared on system reset.
rprSpanErrorCountersCurrentEntry
Errors statistics for the current interval of a particular span of a particular RPR interface. The corresponding instance of rprIfTimeElapsed indicates the number of seconds which have elapsed so far in the current interval.
rprSpanErrorCurrentIfIndex
The ifIndex of this RPR interface.
rprSpanErrorCurrentSpan
An indication of the span of the interface for which this row contains information.
rprSpanErrorCurrentTtlExpFrames
The number of received (PHY to MAC) data frames that were dropped due to zero Time To Live (TTL).
rprSpanErrorCurrentTooLongFrames
The number of received (PHY to MAC) frames that exceed the maximum permitted frame size.
rprSpanErrorCurrentTooShortFrames
The number of received (PHY to MAC) frames shortest than the minimum permitted frame size.
rprSpanErrorCurrentBadHecFrames
The number of received (PHY to MAC) frames with HEC error.
rprSpanErrorCurrentBadFcsFrames
The number of received (PHY to MAC) data and control frames where the fcs value did not match the expected fcs value. This includes data frames passed to the client as a result of rprIfMacOperModes being not set to dropBadFcs.
rprSpanErrorCurrentSelfSrcUcastFrames
The number of received (PHY to MAC) unicast frames that were transmitted by the station itself i.e. the source MAC is equal to the interface MAC.
rprSpanErrorCurrentPmdAbortFrames
The number of received (PHY to MAC) frames that were aborted by the PMD.
rprSpanErrorCurrentBadAddrFrames
The number of received (PHY to MAC) frames with invalid SA value.
rprSpanErrorCurrentBadParityFrames
The number of received (PHY to MAC) frames parity value not matching the expected parity value
rprSpanErrorCurrentContainedFrames
The number of received (PHY to MAC) frames that were removed due to context containment
rprSpanErrorCurrentScffErrors
The number of received (PHY to MAC) errored SCFF, with bad parity, bad FCS, or both.
rprSpanErrorCurrentErroredSeconds
The number of errored seconds.
rprSpanErrorCurrentSeverelyErroredSeconds
The number of severely errored seconds.
rprSpanErrorCurrentUnavailableSeconds
The number of unavailable seconds.
rprSpanErrorCountersIntervalTable
The RPR Errors Interval counters table. All attributes in this table are volatile, i.e. will be cleared on system reset.
rprSpanErrorCountersIntervalEntry
Error statistics collected for a particular interval of a particular span of a particular RPR interface. The corresponding instance of rprIfValidIntervals indicates the number of intervals for which the set of statistics is available.
rprSpanErrorIntervalIfIndex
The ifIndex of this RPR interface.
rprSpanErrorIntervalSpan
An indication of the span of the interface for which this row contains information.
rprSpanErrorIntervalNumber
A number between 1 and 96, which identifies the interval for which the set of statistics is available. The interval identified by 1 is the most recently completed 15 minute interval, and interval identified by N is the interval immediately preceding the o ...
rprSpanErrorIntervalValidData
This variable indicates if the data for this interval is valid. It will be valid if it contains data for 900 seconds plus or minus 10 seconds.
rprSpanErrorIntervalTimeElapsed
The duration of a particular interval in seconds. If, for some reason, such as an adjustment in the system's time-of-day clock, the current interval exceeds the maximum value, the agent will return the maximum value.
rprSpanErrorIntervalTtlExpFrames
The number of received (PHY to MAC) frames that were dropped due to zero Time To Live (TTL) in a particular interval in the past 24 hours
rprSpanErrorIntervalTooLongFrames
The number of received (PHY to MAC) frames that exceed the maximum permitted frame size in a particular interval in the past 24 hours
rprSpanErrorIntervalTooShortFrames
The number of received (PHY to MAC) frames shortest than the minimum permitted frame size in a particular interval in the past 24 hours.
rprSpanErrorIntervalBadHecFrames
The number of received (PHY to MAC) frames with HEC error in a particular interval in the past 24 hours
rprSpanErrorIntervalBadFcsFrames
The number of received (PHY to MAC) data and control frames where the fcs value did not match the expected fcs value. This includes data frames passed to the client as a result of rprIfMacOperModes being not set to dropBadFcs.
rprSpanErrorIntervalSelfSrcUcastFrames
The number of received (PHY to MAC) unicast frames that were transmitted by the station itself i.e. the source MAC is equal to the interface MAC, in a particular interval in the past 24 hours
rprSpanErrorIntervalPmdAbortFrames
The number of received (PHY to MAC) unicast frames that were aborted by the PMD layer, in a particular interval in the past 24 hours
rprSpanErrorIntervalBadAddrFrames
The number of received (PHY to MAC) frames with invalid SA value.
rprSpanErrorIntervalBadParityFrames
The number of received (PHY to MAC) frames parity value not matching the expected parity value
rprSpanErrorIntervalContainedFrames
The number of received (PHY to MAC) frames that were removed due to context containment
rprSpanErrorIntervalScffErrors
The number of received (PHY to MAC) errored SCFF, with bad parity, bad FCS, or both.
rprSpanErrorIntervalErroredSeconds
The number of errored seconds.
rprSpanErrorIntervalSeverelyErroredSeconds
The number of severely errored seconds.
rprSpanErrorIntervalUnavailableSeconds
The number of unavailable seconds.
rprSpanErrorCountersDayTable
The RPR Mac Error Day Table contains the cumulative sum of the various statistics for the 24 hour period preceding the current interval. All attributes in this table are volatile, i.e. will be cleared on system reset.
rprSpanErrorCountersDayEntry
An entry in the RPR Error Day table.
rprSpanErrorDayIfIndex
The ifIndex of this RPR interface.
rprSpanErrorDaySpan
An indication of the span of the interface for which this row contains information.
rprSpanErrorDayTtlExpFrames
The number of received (PHY to MAC) frames that were dropped due to zero Time To Live (TTL).
rprSpanErrorDayTooLongFrames
The number of received (PHY to MAC) frames that exceed the maximum permitted frame size.
rprSpanErrorDayTooShortFrames
The number of received (PHY to MAC) frames shortest than the minimum permitted frame size.
rprSpanErrorDayBadHecFrames
The number of received (PHY to MAC) frames with HEC error.
rprSpanErrorDayBadFcsFrames
The number of received (PHY to MAC) data and control frames where the fcs value did not match the expected fcs value. This includes data frames passed to the client as a result of rprIfMacOperModes being not set to dropBadFcs.
rprSpanErrorDaySelfSrcUcastFrames
The number of received (PHY to MAC) unicast frames that were transmitted by the station itself i.e. the source MAC is equal to the interface MAC.
rprSpanErrorDayPmdAbortFrames
The number of received (PHY to MAC) frames that were aborted by the PMD
rprSpanErrorDayBadAddrFrames
The number of received (PHY to MAC) frames with invalid SA value.
rprSpanErrorDayBadParityFrames
The number of received (PHY to MAC) frames parity value not matching the expected parity value
rprSpanErrorDayContainedFrames
The number of received (PHY to MAC) frames that were removed due to context containment
rprSpanErrorDayScffErrors
The number of received (PHY to MAC) errored SCFF, with bad parity, bad FCS, or both.
rprSpanErrorDayErroredSeconds
The number of errored seconds.
rprSpanErrorDaySeverelyErroredSeconds
The number of severely errored seconds.
rprSpanErrorDayUnavailableSeconds
The number of unavailable seconds.
rprSpanErrorCountersStatsTable
The RPR Errors total counters table. The DiscontinuityTime for this table is indicated by ifCounterDiscontinuityTime defined in ifXTable. All attributes in this table are volatile, i.e. will be cleared on system reset.
rprSpanErrorCountersStatsEntry
An entry in the span error counter table.
rprSpanErrorStatsIfIndex
The ifIndex of this RPR interface.
rprSpanErrorStatsSpan
An indication of the span of the interface for which this row contains information.
rprSpanErrorStatsTtlExpFrames
The number of received (PHY to MAC) frames that were dropped due to zero Time To Live (TTL).
rprSpanErrorStatsTooLongFrames
The number of received (PHY to MAC) frames that exceed the maximum permitted frame size.
rprSpanErrorStatsTooShortFrames
The number of received (PHY to MAC) frames shortest than the minimum permitted frame size.
rprSpanErrorStatsBadHecFrames
The number of received (PHY to MAC) frames with HEC error.
rprSpanErrorStatsBadFcsFrames
The number of received (PHY to MAC) data and control frames where the fcs value did not match the expected fcs value. This includes data frames passed to the client as a result of rprIfMacOperModes being not set to dropBadFcs.
rprSpanErrorStatsSelfSrcUcastFrames
The number of received (PHY to MAC) unicast frames that were transmitted by the station itself i.e. the source MAC is equal to the interface MAC.
rprSpanErrorStatsPmdAbortFrames
The number of received (PHY to MAC) frames that were aborted by the PMD
rprSpanErrorStatsBadAddrFrames
The number of received (PHY to MAC) frames with invalid SA value.
rprSpanErrorStatsBadParityFrames
The number of received (PHY to MAC) frames parity value not matching the expected parity value
rprSpanErrorStatsContainedFrames
The number of received (PHY to MAC) frames that were removed due to context containment
rprSpanErrorStatsScffErrors
The number of received (PHY to MAC) errored SCFF, with bad parity, bad FCS, or both.
rprIfGroup
Collection of objects needed for RPR MAC configuration.
rprIfGroupOpt
Collection of objects for RPR MAC.
rprIfStatsControlGroup
Collection of objects needed for RPR MAC statistics management.
rprSpanGroup
Collection of objects needed for RPR Span configuration.
rprSpanGroupOpt
Collection of objects for RPR Span.
rprSpanProtectionGroup
Collection of objects needed for RPR Span Protection monitoring.
rprTopoGroup
Collection of objects needed for RPR Topology discovery.
rprFairnessGroup
Collection of objects needed for RPR Fairness configuration.
rprFairnessGroupOpt
Collection of objects for RPR Fairness.
rprOamGroup
Collection of objects needed for RPR OAM configuration.
rprIfChangeSummaryGroup
Collection of objects summarizes changes on the RPR interfaces.
rprSpanCurrentGroup
Collection of objects counting MAC span current statistics.
rprSpanIntervalGroup
Collection of objects counting MAC span intervals statistics.
rprSpanDayGroup
Collection of objects counting MAC span 24 hours statistics.
rprSpanStatsGroup
Collection of objects counting MAC span total statistics.
rprClientCurrentGroup
Collection of objects counting MAC client interface current statistics.
rprClientIntervalGroup
Collection of objects counting MAC client interface intervals statistics.
rprClientDayGroup
Collection of objects counting MAC client interface 24 hours statistics.
rprClientStatsGroup
Collection of objects counting MAC client interface total statistics.
rprErrorCurrentGroup
Collection of objects counting MAC span error current statistics.
rprErrorIntervalGroup
Collection of objects counting MAC span error intervals statistics.
rprErrorDayGroup
Collection of objects counting MAC span error 24 hours statistics.
rprErrorStatsGroup
Collection of objects counting MAC span error total statistics.

Download IPHost Network Monitor (500 monitors for 30 days, 50 monitors free forever) to start monitoring network devices right now.

MIBs list