IEEE8021-CFM-V2-MIB Download
Connectivity Fault Management V2 module for
managing IEEE 802.1ag-2007.
IPHost Network Monitor offer an easy way of SNMP monitoring your Cisco Servers, Routers, Switches, Bridges,
Firewalls, Repeaters.
OID list for IEEE8021-CFM-V2-MIB
- ieee8021CfmStackTable
- There is one CFM Stack table per bridge. It permits the retrieval of information about the Maintenance Points configured on any given interface. REFERENCE 12.14.2
- ieee8021CfmStackEntry
- The Stack table entry
- ieee8021CfmStackifIndex
- This object represents the Bridge Port or aggregated port on which MEPs or MHFs might be configured. Upon a restart of the system, the system SHALL, if necessary, change the value of this variable, and rearrange the ieee8021CfmStackTable, so that it ind ...
- ieee8021CfmStackServiceSelectorType
- Type of the Service Selector identifier indicated by ieee8021CfmStackServiceSelectorOrNone. See textual convention IEEE8021ServiceSelectorType for details. REFERENCE 12.14.2.1.2:d, 22.1.7
- ieee8021CfmStackServiceSelectorOrNone
- Service Selector identifier to which the MP is attached, or 0, if none. See textual convention IEEE8021ServiceSelectorValue for details. REFERENCE 12.14.2.1.2:d, 22.1.7
- ieee8021CfmStackMdLevel
- MD Level of the Maintenance Point.
- ieee8021CfmStackDirection
- Direction in which the MP faces on the Bridge Port
- ieee8021CfmStackMdIndex
- The index of the Maintenance Domain in the ieee8021CfmMdTable to which the MP is associated, or 0, if none.
- ieee8021CfmStackMaIndex
- The index of the MA in the ieee8021CfmMaNetTable and ieee8021CfmMaCompTable to which the MP is associated, or 0, if none.
- ieee8021CfmStackMepId
- If an MEP is configured, the MEPID, else 0
- ieee8021CfmStackMacAddress
- MAC address of the MP.
- ieee8021CfmVlanTable
- This table defines the association of VIDs into VLANs. There is an entry in this table, for each component of the bridge, for each VID that is: a) a VID belonging to a VLAN associated with more than one VID; and b) not the Primary VLAN of that VID. The e ...
- ieee8021CfmVlanEntry
- The VLAN table entry.
- ieee8021CfmVlanComponentId
- The bridge component within the system to which the information in this ieee8021CfmVlanEntry applies. If the system is not a Bridge, or if only one component is present in the Bridge, then this variable (index) MUST be equal to 1. REFERENCE 12.3 l)
- ieee8021CfmVlanSelector
- This is a service ID belonging to a service that is associated with more than one Service Selector identifiers, and this is not the Primary Service ID of the service. The type of this Service Selector is the same as the primary Service Selector's type def ...
- ieee8021CfmDefaultMdEntry
- The Default MD Level table entry.
- ieee8021CfmDefaultMdComponentId
- The bridge component within the system to which the information in this ieee8021CfmDefaultMdEntry applies. If the system is not a Bridge, or if only one component is present in the Bridge, then this variable (index) MUST be equal to 1. REFERENCE 12.3 l)
- ieee8021CfmDefaultMdPrimarySelectorType
- Type of the Primary Service Selector identifier indicated by ieee8021CfmDefaultMdPrimarySelector. See textual convention IEEE8021ServiceSelectorType for details. ::= { ieee8021CfmDefaultMdEntry 2 } SYNTAX IEEE8021ServiceSelectorValue MAX-ACCESS not- ...
- ieee8021CfmDefaultMdLevel
- A value indicating the MD Level at which MHFs are to be created, and Sender ID TLV transmission by those MHFs is to be controlled, for the VLAN to which this entry's objects apply. If this object has the value -1, the MD Level for MHF creation for this V ...
- ieee8021CfmDefaultMdMhfCreation
- A value indicating if the Management entity can create MHFs (MIP Half Function) for this VID at this MD Level. If this object has the value defMHFdefer, MHF creation for this VLAN is controlled by ieee8021CfmDefaultMdDefMhfCreation. The value of this var ...
- ieee8021CfmDefaultMdIdPermission
- Enumerated value indicating what, if anything, is to be included in the Sender ID TLV (21.5.3) transmitted by MHFs created by the Default Maintenance Domain. If this object has the value sendIdDefer, Sender ID TLV transmission for this VLAN is controlled ...
- ieee8021CfmConfigErrorListTable
- The CFM Configuration Error List table provides a list of Interfaces and VIDs that are incorrectly configured. REFERENCE 12.14.4
- ieee8021CfmConfigErrorListEntry
- The Config Error List Table entry
- ieee8021CfmConfigErrorListSelectorType
- Type of the Service Selector identifier indicated by ieee8021CfmConfigErrorListSelector. See textual convention IEEE8021ServiceSelectorType for details. REFERENCE 12.14.4.1.2:a
- ieee8021CfmConfigErrorListSelector
- The Service Selector Identifier of the Service with interfaces in error. See IEEE8021ServiceSelectorValue for details. REFERENCE 12.14.4.1.2:a
- ieee8021CfmConfigErrorListIfIndex
- This object is the IfIndex of the interface. Upon a restart of the system, the system SHALL, if necessary, change the value of this variable so that it indexes the entry in the interface table with the same value of ifAlias that it indexed before the syst ...
- ieee8021CfmConfigErrorListErrorType
- A vector of Boolean error conditions from 22.2.4, any of which may be true: 0) CFMleak; 1) ConflictingVids; 2) ExcessiveLevels; 3) OverlappedLevels. REFERENCE 12.14.4.1.3:b
- ieee8021CfmMaCompTable
- The Maintenance Association table. Each row in the table represents an MA. An MA is a set of MEPs, each configured with a single service instance. This is the part of the complete MA table that is variable across the Bridges in a Maintenance Domain, or ...
- ieee8021CfmMaCompEntry
- The MA table entry.
- ieee8021CfmMaComponentId
- The bridge component within the system to which the information in this ieee8021CfmMaCompEntry applies. If the system is not a Bridge, or if only one component is present in the Bridge, then this variable (index) MUST be equal to 1. REFERENCE 12.3 l)
- ieee8021CfmMaCompPrimarySelectorType
- Type of the Service Selector identifiers indicated by ieee8021CfmMaCompPrimarySelectorOrNone. If the service instance is defined by more than one Service Selector, this parameter also indicates the type of the ieee8021CfmVlanPrimarySelector and ieee8021Cf ...
- ieee8021CfmMaCompPrimarySelectorOrNone
- Service Selector identifier to which the MP is attached, or 0, if none. If the MA is associated with more than one Service Selectors Identifiers, the ieee8021CfmVlanTable lists them. REFERENCE 12.14.6.1.3:b
- ieee8021CfmMaCompMhfCreation
- Indicates if the Management entity can create MHFs (MIP Half Function) for this MA. REFERENCE 12.14.6.1.3:c
- ieee8021CfmMaCompIdPermission
- Enumerated value indicating what, if anything, is to be included in the Sender ID TLV (21.5.3) transmitted by MPs configured in this MA. REFERENCE 12.14.6.1.3:d
- ieee8021CfmMaCompNumberOfVids
- The number of VIDs associated with the MA. REFERENCE 12.14.6.1.3:b
- ieee8021CfmMaCompRowStatus
- The status of the row. The writable columns in a row can not be changed if the row is active. All columns MUST have a valid value before a row can be activated. ::= { ieee8021CfmMaCompEntry 7 } -- ********************************************************** ...
- ieee8021CfmMaGroup
- Objects for the MA group.
- ieee8021CfmDefaultMdGroup
- Objects for the Default MD Level group.
- ieee8021CfmVlanIdGroup
- Objects for the VLAN ID group.
- ieee8021CfmConfigErrorListGroup
- Objects for the CFM Configuration Error List Group.
Download IPHost Network Monitor (500 monitors for 30 days, 50 monitors free forever) to start monitoring network devices right now.
