IPX

MIBs list

With the IPHost SNMP tool, you can monitor any SNMP objects of the IPX . You can select a variable to monitor using the built-in IPHost MIB browser that provides you with all variables, their current values and descriptions taken from the IPX .

OID list for IPX

ipxBasicSysTable
The IPX System table - basic information.
ipxBasicSysEntry
on the system.
ipxBasicSysInstance
row corresponds. This value may be written only when creating a new entry in the table.
ipxBasicSysExistState
Setting this field to off indicates that this entry may be deleted from the system table at the IPX implementation's discretion.
ipxBasicSysNetNumber
system.
ipxBasicSysNode
system.
ipxBasicSysName
The readable name for this system.
ipxBasicSysInReceives
those received in error.
ipxBasicSysInHdrErrors
their headers, including any IPX packet with a size less than the minimum of 30 bytes.
ipxBasicSysInUnknownSockets
destination socket was not open.
ipxBasicSysInDiscards
reasons other than those accounted for by ipxBasicSysInHdrErrors, ipxBasicSysInUnknownSockets, ipxAdvSysInDiscards, and ipxAdvSysInCompressDiscards.
ipxBasicSysInBadChecksums
checksums.
ipxBasicSysInDelivers
including packets from local applications.
ipxBasicSysNoRoutes
found.
ipxBasicSysOutRequests
transmission, not including any packets counted in ipxAdvForwPackets.
ipxBasicSysOutMalformedRequests
errors in their structure.
ipxBasicSysOutDiscards
reasons other than those accounted for in ipxBasicSysOutMalformedRequests, ipxAdvSysOutFiltered, and ipxAdvSysOutCompressDiscards.
ipxBasicSysOutPackets
The total number of IPX packets transmitted.
ipxBasicSysConfigSockets
open at one time.
ipxBasicSysOpenSocketFails
The number of IPX socket open calls which failed.
ipxAdvSysTable
The IPX System table - advanced information.
ipxAdvSysEntry
on the system.
ipxAdvSysInstance
row corresponds. This value may be written only when creating a new entry in the table.
ipxAdvSysMaxPathSplits
value which this instance of the IPX may split between when forwarding packets.
ipxAdvSysMaxHops
The maximum number of hops a packet may take.
ipxAdvSysInTooManyHops
maximum hop count.
ipxAdvSysInFiltered
filtering.
ipxAdvSysInCompressDiscards
decompression errors.
ipxAdvSysNETBIOSPackets
The number of NETBIOS packets received.
ipxAdvSysForwPackets
The number of IPX packets forwarded.
ipxAdvSysOutFiltered
filtering.
ipxAdvSysOutCompressDiscards
compression errors.
ipxAdvSysCircCount
The number of circuits known to this instance of IPX.
ipxAdvSysDestCount
this instance of IPX.
ipxAdvSysServCount
The number of services known to this instance of IPX.
ipxCircTable
The Circuit table.
ipxCircEntry
system.
ipxCircSysInstance
to which this entry corresponds. This value may be written only when creating a new entry in the table.
ipxCircIndex
instance of IPX. This value may be written only when creating a new entry in the table.
ipxCircExistState
value set to off may be deleted from the table at the IPX implementation's discretion.
ipxCircOperState
The operational state of the circuit.
ipxCircIfIndex
circuit. This value may be written only when creating a new entry in the table.
ipxCircName
The readable name for the circuit.
ipxCircType
The type of the circuit.
ipxCircDialName
used to create this circuit. This value may be written only when creating a new entry in the table.
ipxCircLocalMaxPacketSize
system supports locally on this circuit.
ipxCircCompressState
be written only when creating a new entry in the table.
ipxCircCompressSlots
circuit. This value may be written only when creating a new entry in the table.
ipxCircStaticStatus
and services reached via this circuit matches that saved in permanent storage (current). Setting the value to write when it had the value changed will write the currently in use information to permanent storage, if supported. Setting the value to read w ...
ipxCircCompressedSent
The number of compressed packets sent.
ipxCircCompressedInitSent
The number of compression initialization packets sent.
ipxCircCompressedRejectsSent
The number of compressed packet rejected packets sent.
ipxCircUncompressedSent
even though compression was turned on for this circuit.
ipxCircCompressedReceived
The number of compressed packets received.
ipxCircCompressedInitReceived
The number of compression initialization packets received.
ipxCircCompressedRejectsReceived
The number of compressed packet rejected packets received.
ipxCircUncompressedReceived
compressed even though compression was turned on for this circuit.
ipxCircMediaType
The media type used on this circuit.
ipxCircNetNumber
be written only when creating a new entry in the table.
ipxCircStateChanges
The number of times the circuit has changed state.
ipxCircInitFails
circuit has failed.
ipxCircDelay
transmit one byte of data, excluding protocol headers, to a destination on the other end of the circuit, if the circuit is free of other traffic.
ipxCircThroughput
through the circuit if there is no other traffic.
ipxCircNeighRouterName
The name of the neighboring router on a WAN circuit.
ipxCircNeighInternalNetNum
on a WAN circuit.
ipxDestTable
known destinations.
ipxDestEntry
Each entry corresponds to one destination.
ipxDestSysInstance
to which this row corresponds.
ipxDestNetNum
The IPX network number of the destination.
ipxDestProtocol
destination was obtained.
ipxDestTicks
The delay in ticks to reach this destination.
ipxDestHopCount
The number of hops necessary to reach the destination.
ipxDestNextHopCircIndex
next hop.
ipxDestNextHopNICAddress
The NIC address of the next hop.
ipxDestNextHopNetNum
The IPX network number of the next hop.
ipxStaticRouteTable
destinations reached via statically configured routes.
ipxStaticRouteEntry
Each entry corresponds to one static route.
ipxStaticRouteSysInstance
which this row corresponds.
ipxStaticRouteCircIndex
reach the first hop in the static route.
ipxStaticRouteNetNum
The IPX network number of the route's destination.
ipxStaticRouteExistState
value set to off may be deleted from the table at the implementation's discretion.
ipxStaticRouteTicks
The delay, in ticks, to reach the route's destination.
ipxStaticRouteHopCount
The number of hops necessary to reach the destination.
ipxServTable
The table of services, indexed by name and type.
ipxServEntry
Each entry corresponds to one service.
ipxServSysInstance
to which this entry corresponds.
ipxServType
The service type.
ipxServName
The service name.
ipxServProtocol
obtained.
ipxServNetNum
service.
ipxServNode
The node portion of the IPX address of the service.
ipxServSocket
The socket portion of the IPX address of the service.
ipxServHopCount
The number of hops to the service.
ipxDestServTable
and type.
ipxDestServEntry
Each entry corresponds to one service.
ipxDestServSysInstance
to which this entry corresponds.
ipxDestServNetNum
service.
ipxDestServNode
The node portion of the IPX address of the service.
ipxDestServSocket
The socket portion of the IPX address of the service.
ipxDestServName
The service name.
ipxDestServType
The service type.
ipxDestServProtocol
obtained.
ipxDestServHopCount
The number of hops to the service.
ipxStaticServTable
all services reached via statically configured routes.
ipxStaticServEntry
Each entry corresponds to one service.
ipxStaticServSysInstance
this entry corresponds.
ipxStaticServCircIndex
The circuit used to reach this service.
ipxStaticServName
The service name.
ipxStaticServType
The service type.
ipxStaticServExistState
value set to off may be deleted from the table at the implementation's discretion.
ipxStaticServNetNum
service.
ipxStaticServNode
The node portion of the IPX address of the service.
ipxStaticServSocket
The socket portion of the IPX address of the service.
ipxStaticServHopCount
The number of hops to the service.

You can start network devices monitoring using free 30-day trial version of IPHost Network Monitor right now. Witn IPHost SNMP monitor you can monitor network performance, audit network usage, detect network faults, or inappropriate access. The IPHost's SNMP monitor can communicate and interact with any SNMP-enabled device.

MIBs list