JNX-MPLS-TE-P2MP-STD-MIB Download

jnxMplsTeP2mpTunnelConfigured

The number of P2MP tunnels configured on this device. A tunnel is considered configured if the mplsTunnelRowStatus in MPLS-TE-STD-MIB is active(1).

jnxMplsTeP2mpTunnelActive

The number of P2MP tunnels active on this device. A tunnel is considered active if the mplsTunnelOperStatus in MPLS-TE-STD-MIB is up(1).

jnxMplsTeP2mpTunnelTotalMaxHops

The maximum number of hops that can be specified for an entire P2MP tunnel on this device. This object should be used in conjunction with mplsTunnelMaxHops in MPLS-TE-STD-MIB that is used in the context of P2MP tunnels to express the maximum number of hop ...

jnxMplsTeP2mpTunnelTable

The mplsTeP2mpTunnelTable allows new P2MP MPLS tunnels to be created between an LSR and one or more remote end-points, and existing P2MP tunnels to be reconfigured or removed. This table sparse augments mplsTunnelTable in MPLS-TE-STD-MIB such that entries ...

jnxMplsTeP2mpTunnelEntry

An entry in this table represents a P2MP MPLS tunnel. An entry can be created by a network administrator or by an SNMP agent as instructed by an MPLS signaling protocol. An entry in this table MUST correspond to an entry in the mplsTunnelTable in MPLS-TE- ...

jnxMplsTeP2mpTunnelP2mpIntegrity

Denotes whether or not P2MP Integrity is required for this tunnel. If P2MP integrity is operational on a P2MP tunnel then the failure of the path to any of the tunnel destinations should cause the teardown of the entire P2MP tunnel.

jnxMplsTeP2mpTunnelBranchRole

This value supplements the value in the object mplsTunnelRole in MPLS-TE-STD-MIB that indicates the role of this LSR in the tunnel represented by this entry in mplsTeP2mpTunnelTable. mplsTunnelRole may take any of the values: head(1), transit(2), tail(3), ...

jnxMplsTeP2mpTunnelP2mpXcIndex

This object contains the value of mplsXCIndex, the primary index of the mplsXCTable for all cross-connect entries for this P2MP LSP. If no XC entries have been created yet, this object must return zero. The set of entries in the mplsXCTable for this P2MP ...

jnxMplsTeP2mpTunnelRowStatus

This variable is used to create, modify, and/or delete a row in this table. When a row in this table is in active(1) state, no objects in that row can be modified by the agent except mplsTeP2mpTunnelRowStatus and mplsTeP2mpTunnelStorageType. This object ...

jnxMplsTeP2mpTunnelStorageType

The storage type for this tunnel entry. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row.

jnxMplsTeP2mpTunnelSubGroupIDNext

This object contains an unused value for mplsTeP2mpTunnelDestSubGroupID, or a zero to indicate that none exists. Negative values are not allowed, as they do not correspond to valid values of mplsTeP2mpTunnelDestSubGroupID. Note that this object offers an ...

jnxMplsTeP2mpTunnelDestTable

The mplsTeP2mpTunnelDestTable allows new destinations of P2MP MPLS tunnels to be added to and removed from P2MP tunnels.

jnxMplsTeP2mpTunnelDestEntry

An entry in this table represents a destination of a P2MP MPLS tunnel. An entry can be created by a network administrator or by an SNMP agent as instructed by an MPLS signaling protocol. Entries in this table share some index fields with the mplsTeP2mpTun ...

jnxMplsTeP2mpTunnelDestSrcSubGroupOriginType

This object identifies the type of address carried in mplsTeP2mpTunnelDestSrcSubGroupOrigin. Since the object mplsTeP2mpTunnelDestSrcSubGroupOrigin must conform to the protocol specification, this object must return either ipv4(1) or ipv6(2) at a transit ...

jnxMplsTeP2mpTunnelDestSrcSubGroupOrigin

The TE Router ID (reachable and stable IP address) of the originator of the P2MP sub-group as received on a Path message by a transit or egress LSR. This object is interpreted in the context of mplsTeP2mpTunnelDestSrcSubGroupOriginType. The value of the s ...

jnxMplsTeP2mpTunnelDestSrcSubGroupID

The unique identifier assigned by the sub-group originator for this sub-group of this P2MP tunnel as received on a Path message by a transit or egress LSR. The value of the sub-group identifier used on outgoing Path messages is found in mplsTeP2mpTunnelDe ...

jnxMplsTeP2mpTunnelDestSubGroupOriginType

This object identifies the type of address carried in mplsTeP2mpTunnelDestSubGroupOrigin. This object must return either ipv4(1) or ipv6(2) in keeping with the protocol specification.

jnxMplsTeP2mpTunnelDestSubGroupOrigin

The TE Router ID (reachable and stable IP address) of the originator of the P2MP sub-group. In many cases, this will be the ingress LSR of the P2MP tunnel and will be the received signaled value as available in mplsTeP2mpTunnelDestSrcSubGroupOrigin. When ...

jnxMplsTeP2mpTunnelDestSubGroupID

The unique identifier assigned by the sub-group originator for this sub-group of this P2MP tunnel. An appropriate value for this object during row creation when the sub-group origin in mplsTeP2mpTunnelDestSubGroupOrigin is the local LSR can be obtained by ...

jnxMplsTeP2mpTunnelDestDestinationType

This object identifies the type of address carried in mplsTeP2mpTunnelDestDestination. This object forms part of the index of this table and can, therefore, not return the value unknown(0). Similarly, since the object mplsTeP2mpTunnelDestDestination must ...

jnxMplsTeP2mpTunnelDestDestination

A single destination of this P2MP tunnel. That is, a routable TE address of a leaf. This will often be the TE Router ID of the leaf, but can be any interface address. When a signaling protocol is used, this object corresponds to the S2L Sub-LSP destinatio ...

jnxMplsTeP2mpTunnelDestBranchOutSegment

This object identifies the outgoing branch from this LSR towards the destination represented by this table entry. It must be a unique identifier within the scope of this tunnel. If MPLS-LSR-STD-MIB is implemented, this object should contain an index into ...

jnxMplsTeP2mpTunnelDestHopTableIndex

Index into the mplsTunnelHopTable entry that specifies the explicit route hops for this destination of the P2MP tunnel. This object represents the configured route for the branch of the P2MP tree to this destination and is meaningful only at the head-end ...

jnxMplsTeP2mpTunnelDestPathInUse

This value denotes the configured path that was chosen as the explicit path to this destination of this P2MP tunnel. This value reflects the secondary index into mplsTunnelHopTable where the primary index comes from mplsTeP2mpTunnelDestHopTableIndex. The ...

jnxMplsTeP2mpTunnelDestCHopTableIndex

Index into the mplsTunnelCHopTable that identifies the explicit path for this destination of the P2MP tunnel. This path is based on the chosen configured path identified by mplsTeP2mpTunnelDestHopTableIndex and mplsTeP2mpTunnelDestPathInUse, but may have ...

jnxMplsTeP2mpTunnelDestARHopTableIndex

Index into the mplsTunnelARHopTable that identifies the actual hops traversed to this destination of the P2MP tunnel. This is automatically updated by the agent when the actual hops becomes available. If this destination is the destination of the 'first S ...

jnxMplsTeP2mpTunnelDestTotalUpTime

This value represents the aggregate up time for all instances of this tunnel to this destination, if this information is available. If this information is not available, this object MUST return a value of 0.

jnxMplsTeP2mpTunnelDestInstanceUpTime

This value identifies the total time that the currently active tunnel instance to this destination has had its operational status (mplsTeP2mpTunnelDestOperStatus) set to up(1) since it was last previously not up(1).

jnxMplsTeP2mpTunnelDestPathChanges

This object counts the number of times the actual path for this destination of this P2MP tunnel instance has changed. This object should be read in conjunction with mplsTeP2mpTunnelDestDiscontinuityTime.

jnxMplsTeP2mpTunnelDestLastPathChange

Specifies the time since the last change to the actual path for this destination of this P2MP tunnel instance.

jnxMplsTeP2mpTunnelDestCreationTime

Specifies the value of sysUpTime when the first instance of this tunnel came into existence for this destination. That is, when the value of mplsTeP2mpTunnelDestOperStatus was first set to up(1).

jnxMplsTeP2mpTunnelDestStateTransitions

This object counts the number of times the status (mplsTeP2mpTunnelDestOperStatus) of this tunnel instance to this destination has changed. This object should be read in conjunction with mplsTeP2mpTunnelDestDiscontinuityTime.

jnxMplsTeP2mpTunnelDestDiscontinuityTime

The value of sysUpTime on the most recent occasion at which any one or more of this row's Counter32 objects experienced a discontinuity. If no such discontinuity has occurred since the last re-initialization of the local management subsystem, then this ob ...

jnxMplsTeP2mpTunnelDestAdminStatus

Indicates the desired operational status of this destination of this P2MP tunnel.

jnxMplsTeP2mpTunnelDestOperStatus

Indicates the actual operational status of this destination of this P2MP tunnel. This object may be compared to mplsTunnelOperStatus that includes two other values: dormant(5) -- some component is missing notPresent(6) -- down due to the state of -- lo ...

jnxMplsTeP2mpTunnelDestRowStatus

This object is used to create, modify, and/or delete a row in this table. When a row in this table is in active(1) state, no objects in that row can be modified by SET operations except mplsTeP2mpTunnelDestAdminStatus and mplsTeP2mpTunnelDestStorageType.

jnxMplsTeP2mpTunnelDestStorageType

Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row.

jnxMplsTeP2mpTunnelBranchPerfTable

This table provides per-tunnel branch MPLS performance information. This table is not valid for switching types other than packet.

jnxMplsTeP2mpTunnelBranchPerfEntry

An entry in this table is created by the LSR for each downstream branch (out-segment) from this LSR for this P2MP tunnel. More than one destination as represented by an entry in the mplsTeP2mpTunnelDestTable may be reached through a single out-segment. Mo ...

jnxMplsTeP2mpTunnelBranchPerfBranch

This object identifies an outgoing branch from this LSR for this tunnel. Its value is unique within the context of the tunnel. If MPLS-LSR-STD-MIB is implemented, this object should contain an index into mplsOutSegmentTable. Under all circumstances, this ...

jnxMplsTeP2mpTunnelBranchPerfPackets

Number of packets forwarded by the tunnel onto this branch. This object should represents the 32-bit value of the least significant part of the 64-bit value if both mplsTeP2mpTunnelBranchPerfHCPackets is returned. This object should be read in conjunction ...

jnxMplsTeP2mpTunnelBranchPerfHCPackets

High capacity counter for number of packets forwarded by the tunnel onto this branch. This object should be read in conjunction with mplsTeP2mpTunnelBranchDiscontinuityTime.

jnxMplsTeP2mpTunnelBranchPerfErrors

Number of packets dropped because of errors or for other reasons, that were supposed to be forwarded onto this branch for this tunnel. This object should be read in conjunction with mplsTeP2mpTunnelBranchDiscontinuityTime.

jnxMplsTeP2mpTunnelBranchPerfBytes

Number of bytes forwarded by the tunnel onto this branch. This object should represents the 32-bit value of the least significant part of the 64-bit value if both mplsTeP2mpTunnelBranchPerfHCBytes is returned. This object should be read in conjunction wit ...

jnxMplsTeP2mpTunnelBranchPerfHCBytes

High capacity counter for number of bytes forwarded by the tunnel onto this branch. This object should be read in conjunction with mplsTeP2mpTunnelBranchDiscontinuityTime.

jnxMplsTeP2mpTunnelBranchDiscontinuityTime

The value of sysUpTime on the most recent occasion at which any one or more of this row's Counter32 or Counter64 objects experienced a discontinuity. If no such discontinuity has occurred since the last re-initialization of the local management subsystem, ...

jnxMplsTeP2mpTunnelNotificationEnable

If this object is true(1), then it enables the generation of mplsTeP2mpTunnelDestUp and mplsTeP2mpTunnelDestDown notifications. Otherwise these notifications are not emitted. Note that when tunnels have large numbers of destinations, setting this object t ...

jnxMplsTeP2mpGeneralGroup

Collection of objects needed for MPLS P2MP.

jnxMplsTeP2mpScalarGroup

Scalar objects needed to implement P2MP MPLS tunnels.