MYLEXRAID-MIB Download

tComponentid

group is required.

eComponentid

INDEX {DmiComponentIndex} ::= {tComponentid 1} SYNTAX DmiDisplaystring ACCESS read-only STATUS mandatory DESCRIPTION "Controller Manufacturer.

a1Product

Product Name for this Controller.

a1Version

::= {eComponentid 3} SYNTAX DmiDisplaystring ACCESS not-accessible STATUS mandatory DESCRIPTION "

a1Installation

::= {eComponentid 5} SYNTAX DmiInteger ACCESS read-only STATUS mandatory DESCRIPTION "A code that provides a level of verification that the component is still installed and working.

tControllerInformation

This group provides Controller Information.

eControllerInformation

INDEX {DmiComponentIndex, a2ControllerNumber} ::= {tControllerInformation 1} SYNTAX DmiInteger ACCESS read-only STATUS mandatory DESCRIPTION "Controller Number assigned to this controller by the device driver.

a2OperationalState

driver.

a2FirmwareRevision

Controller Firmware Revision.

a2ConfiguredChannels

configuration.

a2ActualChannels

on-board the controller.

a2MaximumLogicalDrives

this controller.

a2MaximumTargetsPerChannel

Maximum Number of SCSI Target IDs supported per SCSI Bus.

a2MaximumTaggedRequests

disk device by Controller Firmware.

a2MaximumDataTransferSizePerIoRequestInK

IO request - in KB.

a2MaximumConcurrentCommands

simultaneouly.

a2RebuildRate

Value of Rebuild Rate.

a2LogicalSectorSizeInBytes

Logical Sector Size in Bytes (Default: 512 bytes).

a2PhysicalSectorSizeInBytes

Physical Sector Size in Bytes (Default: 512 bytes).

a2CacheLineSizeInBytes

Cache Line Size in Bytes.

a2CacheSizeInMb

Size of Controller Cache Module - in MB.

a2CacheMemoryType

Controller Cache Memory Type.

a2EpromSizeInKb

Size of Controller EPROM Module - in KB.

a2BusType

Controller - System Bus Interface Type.

a2ControllerClassType

Controller Class.

a2ControllerModel

Controller Model Type.

a2SystemBusNumber

with. This value is supplied by the Operating system and may not be defined for all operating systems.

a2SlotNumber

for EISA and MCA controller only.

a2InterruptVectorNumber

value is a mapped IRQ supplied by Operating System and may not be same as the actual Interrupt Vector.

a2InterruptMode

Interrupt Mode - Edge/Level.

a2NumberOfPhysicalDevices

Number Of Physical Devices detected on this controller.

a2NumberOfPhysicalDevicesOffLine

Line.

a2NumberOfLogicalDevices

Number of Logical Devices currently configured.

a2NumberOfLogicalDevicesCritical

Number of Logical Devices, whose operational state is Critical.

a2NumberOfLogicalDevicesOffLine

Line.

a2FaultManagementType

Controller Fault Management Type.

a2ArrayInformation

provided in Channel-Target combination form.

a2LogicalDriveReadRequestsCount

Number of Read Requests to Logical Drives.

a2AmountOfDataReadFromLogicalDrivesInMb

Amount of Data Read from all Logical Drives - in MB.

a2LogicalDriveWriteRequestsCount

Number of Write Requests to Logical Drives.

a2AmountOfDataWrittenToLogicalDrivesInMb

Amount of data written to all Logical Drives - in MB.

a2LogicalDrivesReadCacheHitPercentage

Logical Drives Read Data Cache Hit Rate.

a2PhysicalDriveReadRequestsCount

Number of Read Requests.

a2AmountOfDataReadFromPhysicalDrivesInMb

Amount of Data Read from all physical drives - in MB.

a2PhysicalDriveWriteRequestsCount

Number of Write Requests.

a2AmountOfDataWrittenToPhysicalDrivesInM

Amount of data written all physical drives - in MB.

a2StorageworksCabinetStatusOnChannel0

StorageWorks Cabinet Status on Channel 0

a2StorageworksCabinetStatusOnChannel1

StorageWorks Cabinet Status on Channel 1

a2StorageworksCabinetStatusOnChannel2

StorageWorks Cabinet Status on Channel 2

tLogicalDriveInformation

Provides information about Logical Drive Configuration.

eLogicalDriveInformation

INDEX {DmiComponentIndex, a3ControllerNumber, a3LogicalDriveNumber} ::= {tLogicalDriveInformation 1} SYNTAX DmiInteger ACCESS read-only STATUS mandatory DESCRIPTION "Controller Number - used as a key.

a3LogicalDriveNumber

Logical Drive Number - used as a Key.

a3OperationalState

Logical Drive Operational State.

a3RaidLevel

RAID Level associated with Logical Drive.

a3WritePolicy

Write Cache Policy associated with Logical Drive.

a3SizeInMb

Logical Drive Size - in MB.

a3PhysicalSizeInMb

Total physical capacity used by this Logical Drive - in MB.

a3StripeSizeInBytes

Levels 0, 5 and 6 only. Value is specifed in bytes.

a3PhysicalDriveMap

The information is provided in Channel-Target combination form.

a3ArrayList

List of Arrays, this logical drive spans across.

tPhysicalDeviceInformation

SCSI Physical Device Information.

ePhysicalDeviceInformation

INDEX {DmiComponentIndex, a4ControllerNumber, a4ScsiBusId, a4ScsiTargetId} ::= {tPhysicalDeviceInformation 1} SYNTAX DmiInteger ACCESS read-only STATUS mandatory DESCRIPTION "Controller Number - used as a key

a4ScsiBusId

SCSI Channel Number - used as a key

a4ScsiTargetId

SCSI Physical Device Target Id - used as a key

a4ScsiLunId

SCSI LUN of Physical Device.

a4OperationalState

SCSI Physical Device State.

a4VendorId

Physical Device Vendor Id - from SCSI Inquiry Info.

a4ProductId

Physical Device Product Id - from SCSI Inquiry Info.

a4ProductRevisionLevel

Info.

a4SizeInMb

Size in MB - from SCSI Read Capacity Data.

a4DeviceType

SCSI Device Type - from SCSI Inquiry Information.

a4SoftErrorsCount

Number of Soft Errors.

a4HardErrorsCount

Number of Hard Errors.

a4ParityErrorsCount

Number of Parity Errors.

a4MiscErrorsCount

Number of Misc Errors.

a4ArrayList

List Of Arrays, this physical drive is part of.

a4LogicalDriveList

List of Logical Drives that depend on this physical drive.

tMylexDac960RaidManagementSoftware

MDAC RAID Management Software Version Information.

eMylexDac960RaidManagementSoftware

INDEX {DmiComponentIndex} ::= {tMylexDac960RaidManagementSoftware 1} SYNTAX DmiDisplaystring ACCESS read-only STATUS mandatory DESCRIPTION "Mylex DAC960 RAID Management Software Revision Information.

a5ManagementSoftwareBuildDate

- month/date/year format.

a5Dac960DeviceDriverRevision

Mylex DAC960 Controller Device driver Revision Information.

a5Dac960DeviceDriverBuildDate

ear format.

a5GamDriverRevision

Mylex DAC960 GAM Driver Revision Information.

a5GamDriverBuildDate

format.

tLogicalDriveStatistics

Logical Drive Performance Statistics

eLogicalDriveStatistics

INDEX {DmiComponentIndex, a6ControllerNumber, a6LogicalDriveNumber} ::= {tLogicalDriveStatistics 1} SYNTAX DmiInteger ACCESS read-only STATUS mandatory DESCRIPTION "Controller Number - used as a key.

a6LogicalDriveNumber

Logical Drive Number - used as a key.

a6ReadRequestsCount

Number of Read Requests.

a6AmountOfDataReadInMb

Amount of Data Read - in MB.

a6WriteRequestsCount

Number of Write Requests.

a6AmountOfDataWrittenInMb

Amount of data written - in MB.

a6ReadCacheHitPercentage

Read Cache Hit Rate.

tPhysicalDriveStatistics

Physical Drive Performance Statistics

ePhysicalDriveStatistics

INDEX {DmiComponentIndex, a7ControllerNumber, a7ScsiBusId, a7ScsiTargetId} ::= {tPhysicalDriveStatistics 1} SYNTAX DmiInteger ACCESS read-only STATUS mandatory DESCRIPTION "Controller Number - used as a key.

a7ScsiBusId

SCSI Channel Number - used as a key.

a7ScsiTargetId

SCSI Target Device Id - used as a key.

a7ScsiLun

SCSI Lun of Physical Device.

a7ReadRequestsCount

Number of Read Requests.

a7AmountOfDataReadInMb

Amount of Data Read - in MB.

a7WriteRequestsCount

Number of Write Requests.

a7AmountOfDataWrittenInMb

Amount of data written - in MB.

tFaultManagementCabinetInformation

Fault Management Cabinet Information.

eFaultManagementCabinetInformation

INDEX {DmiComponentIndex, a8ControllerNumber, a8ScsiBusId, a8CabinetNo} ::= {tFaultManagementCabinetInformation 1} SYNTAX DmiInteger ACCESS read-only STATUS mandatory DESCRIPTION "Controller Number - used as a key.

a8ScsiBusId

SCSI Channel Number - used as a key.

a8CabinetNo

Cabinet Number - used as a key.

a8ScsiTargetId

SCSI Target Device Id.

a8ScsiLun

SCSI Lun of Physical Device.

a8CabinetType

Fault Management Cabinet Type - Conner CR6/Conner Smart/SAFTE.

a8NumberOfFans

Number of Fans housed inside the cabinet.

a8NumberOfPowerSupplyUnits

Number of Power Supply Units.

a8NumberOfHeatSensors

Number of Heat Sensors.

a8NumberOfDriveSlots

Number of Drive Slots.

a8NumberOfDoorLocks

Number of Door Locks.

a8NumberOfSpeakers

Number of Speakers.

a8NumberOfFansCritical

Number of Fans in Critical State.

a8NumberOfPowerSupplyUnitsCritical

Number of Power Supply units in critical state.

a8NumberOfHeatSensorsCritical

Number of Heat Sensors in critical state.

a8NumberOfFansFailed

Number of Fans in Failed State.

a8NumberOfPowerSupplyUnitsFailed

Number of Power Supply units in Failed state.

a8NumberOfHeatSensorsFailed

Number of Heat Sensors in Failed state.

tMylexRaidEventInformation

Event Information for Mylex RAID events.

eMylexRaidEventInformation

INDEX {DmiComponentIndex, a9EventTableIndex} ::= {tMylexRaidEventInformation 1} SYNTAX DmiInteger ACCESS read-only STATUS mandatory DESCRIPTION "Index to the event table. A maximum of 256 events can be stored in the event table.

a9EventCode

Mylex RAID event code.

a9EventTimeStamp

seconds since midnight(00:00:00) January 1, 1970 GMT.

a9ControllerNumber

Identifies the DAC960 Controller.

a9ChannelNumber

Identifies the SCSI Bus.

a9TargetNumber

Identifies the SCSI Target ID of physical device.

a9LunNumber

Identifies the SCSI LUN of physical device.

a9LogicalDriveNumber

Identifies the Logical Drive.

a9FmtCabinetNumber

Identifies the Fault Management Cabinet Number.

a9FanUnitNumber

Identifies the FAN Unit.

a9PowerSupplyUnitNumber

Identifies the Power Supply Unit Number.

a9HeatSensorUnitNumber

Identifies the Heat Sensor Unit Number.

tEventGeneration

Event Generation group for generating Mylex RAID events.

eEventGeneration

INDEX {DmiComponentIndex, a10AssociatedGroup} ::= {tEventGeneration 1} SYNTAX INTEGER { vOperationalStateOfPhysicalDeviceHasChan (1), vOperationalStateOfPhysicalDeviceHasChan (2), vThePhysicalDeviceHasSomeErrors (3), vThePhysicalDeviceIsGoingTo ...

a10EventSeverity

Severity level associated with this event.

a10EventIsStateBased

Is this event state based ?.

a10EventStateKey

state table.

a10AssociatedGroup

Class name of the group that originated this event.

a10EventSystem

The Component that generates this event.

a10EventSubsystem

The sub component that generates this event.

a10InstanceDataPresent

Is instance data present for the associated group ?.

tErrorControl

Indication control and status for the parent group

eErrorControl

INDEX {DmiComponentIndex, a98Selfid} ::= {tErrorControl 1} SYNTAX DmiInteger ACCESS read-only STATUS mandatory DESCRIPTION "Instance Identifier. A unique number that identifies this row.

a98NumberOfFatalErrors

Count of all fatal errors since system startup.

a98NumberOfMajorErrors

Count of all major errors since system startup.

a98NumberOfWarnings

Count of all warning errors since system startup.

a98ErrorStatus

current error status

a98ErrorStatusType

status.

a98AlarmGeneration

Controls indication generation for errors.

tMiftomib

to SNMP translation

eMiftomib

INDEX {DmiComponentIndex} ::= {tMiftomib 1} SYNTAX DmiDisplaystring ACCESS read-only STATUS mandatory DESCRIPTION "The MIB name that defines this MIF

a99MibOid

The MIB OID that corresponds to this MIF

a99DisableTrap

from this component