NETSCREEN-INTERFACE-MIB

NETSCREEN-INTERFACE-MIB Download

MIBs list

This module defines the object that are used to monitor NS's interface configuration

IPHost Network Monitor offer an easy way of SNMP monitoring your Netscreen Servers, Routers, Switches, Bridges, Firewalls, Repeaters.

OID list for NETSCREEN-INTERFACE-MIB

nsIfSecondaryIpTable
In some ScreenOS, it supports multiple IP addresses and related subnets based on the same interface. This table collects the multiple IP addresses configuration on an interface.
nsIfSecondaryIpEntry
nsIfSecondaryIpEntry collects some attributes about multiple IP configurations on an interface.
nsIfSecondaryIpIndex
The table index used as primary key when retrieving the table.
nsIfSecondaryIpIfIdx
The index value which uniquely identifies an interface the secodary ip belongs to. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex.
nsIfSecondaryIpVsys
According NetScreen's concepts, each interface belongs to one virtual system. This attribute displays the virtual system ID an interface belongs to. If the device is device which doesn't support vsys such as NS-100, we can logically think all the setting ...
nsIfSecondaryIpZone
each interface belongs to one security zone. this attribute displays the security zone name an interface belongs to.
nsIfSecondaryIpAddress
Ip Address value.
nsIfSecondaryIpNetmask
Subnet of a ip belongs to.
nsIfTable
All NetScreen devices have a trusted interface and an untrusted interface. The NetScreen-10 and -100 also have a DMZ interface. Additionally, on each of the virtual systems supported by the NetScreen-1000 there can be on or more tursted subinterfaces link ...
nsIfEntry
nsIfEntry collects some attributes about NetScreen interface settings.
nsIfIndex
Interface number which uniquely identifies an interface.
nsIfName
Each interface has a readable name such as 'trust', 'trust/1', etc.
nsIfVsys
According NetScreen's concepts, each interface belongs to one virtual system. This attribute displays the virtual system name an interface belongs to. If the device is device which doesn't support vsys such as NS-100, we can logically think all the settin ...
nsIfZone
Each interface belongs to one security zone. This attribute displays the security zone name an interface belongs to.
nsIfStatus
The interface status which indicates interface's operational status.
nsIfIp
Each interface must be assigned an IP address.
nsIfNetmask
Each interface must belong to a subnet represented by netmask.
nsIfGateway
Default gateway ip address.
nsIfMngIp
Trusted, untrusted and DMZ interfaces can have two IP address: an interface IP address that corresponds to the physical port through which that interface connects to a network, and a Manage IP address that can be used to receive administrative traffic
nsIfMode
NetScreen interface can has three operation modes. They are transparent, nat and route.
nsIfMAC
MAC address the interface has.
nsIfMngTelnet
This attribute is used to indicate whether the interface permits telnet management.
nsIfMngSCS
This attribute is used to indicate whether the interface permits Secure Command Shell management.
nsIfMngWEB
This attribute is used to indicate whether the interface permits WEB UI management.
nsIfMngSSL
This attribute is used to indicate whether the interface permits SSL management.
nsIfMngSNMP
This attribute is used to indicate whether the interface permits SNMP management.
nsIfMngGlobal
This attribute is used to indicate whether the interface permits NS Global management.
nsIfMngGlobalPro
This attribute is used to indicate whether the interface permits NS Global Pro management.
nsIfMngPing
This attribute is used to indicate whether the interface permits Ping go-through.
nsIfMngIdentReset
This attribute is used to indicate whether the interface permits ident reset.
nsIfFlowTable
nsIfFlowTable is used to get flow statistical information of the interface.
nsIfFlowEntry
Table entry collect some attributes about interface flow counters.
nsIfFlowIfIdx
Unique interface id, also used as table index.
nsIfFlowVsys
According NetScreen's concepts. each interface belongs to one virtual system. This attribute displays the virtual system name an interface belongs to.
nsIfFlowInByte
Incoming byte number arriving at the this interface
nsIfFlowInPacket
Incoming packet number arriving at the this interface
nsIfFlowOutByte
Outgoing byte number sending through this interface
nsIfFlowOutPacket
Outgoing packet number sending through this interface
nsIfFlowInVpn
VPN packet go through this interface
nsIfInVlan
Incoming vlan packet
nsIfOutVlan
Outgoing vlan packet
nsIfMonTable
This table collects some of dropped packet counters of interface
nsIfMonEntry
An entry containing tunnel information
nsIfMonIfIdx
Unique interface id, also used as table index.
nsIfMonVsys
According NetScreen's concepts, each interface belongs to one virtual system. This attribute displays the virtual system name an interface belongs to.
nsIfMonPlyDeny
Packet drop since denied by policy.
nsIfMonAuthFail
Packet drop due to authentication failed.
nsIfMonUrlBlock
Packet drop due to URL blocking.
nsIfMonTrMngQueue
packet queue up due to traffic management
nsIfMonTrMngDrop
Packet drop due to traffic management
nsIfMonEncFail
IPSec enc failed due to sa not available, no ipak, etc
nsIfMonNoSa
packet drop due to no sa found for incomig spi
nsIfMonNoSaPly
packet drop due to no policy associated with found sa
nsIfMonSaInactive
packet drop due to sa not active
nsIfMonSaPolicyDeny
packet drop due to denial by sa policy

Download IPHost Network Monitor (500 monitors for 30 days, 50 monitors free forever) to start monitoring network devices right now.

MIBs list