Nortel-Magellan-Passport-BaseRoutingMIB Download

The module describing the Nortel Magellan Passport BaseRouting Enterprise MIB

IPHost Network Monitor offer an easy way of SNMP monitoring your Nortel network devices, Firewalls, Repeaters.

OID list for Nortel-Magellan-Passport-BaseRoutingMIB

rtgRowStatusTable: This entry controls the addition and deletion of rtg components.
rtgRowStatusEntry: A single entry in the table represents a single rtg component.
rtgRowStatus: This variable is used as the basis for SNMP naming of rtg components. These components can be added.
rtgComponentName: This variable provides the component's string name for use with the ASCII Console Interface
rtgStorageType: This variable represents the storage type value for the rtg tables.
rtgIndex: This variable represents the index for the rtg tables.
rtgProvTable: This group contains the provisioning data for the routing system.
rtgProvEntry: An entry in the rtgProvTable.
rtgTandemTraffic: This attribute specifies whether tandem traffic is permitted through the node. Tandem traffic is traffic which arrives at the node on a trunk and leaves the node on a trunk. Traffic to or from a gateway (internal or external) is not affected by the settin ...
rtgSplittingRegionIdsTable: This attribute is used only when splitting or merging existing topology regions. It specifies which topology regions are in a migration status. A node will only exchange topological information with a connected node under the following conditions: (i) the ...
rtgSplittingRegionIdsEntry: An entry in the rtgSplittingRegionIdsTable.
rtgSplittingRegionIdsValue: This variable represents both the value and the index for the rtgSplittingRegionIdsTable.
rtgSplittingRegionIdsRowStatus: This variable is used to control the addition and deletion of individual values of the rtgSplittingRegionIdsTable.
rtgTopRowStatusTable: This entry controls the addition and deletion of rtgTop components.
rtgTopRowStatusEntry: A single entry in the table represents a single rtgTop component.
rtgTopRowStatus: This variable is used as the basis for SNMP naming of rtgTop components. These components cannot be added nor deleted.
rtgTopComponentName: This variable provides the component's string name for use with the ASCII Console Interface
rtgTopStorageType: This variable represents the storage type value for the rtgTop tables.
rtgTopIndex: This variable represents the index for the rtgTop tables.
rtgTopStatsTable: Rtg Top Statistics This group contains operational data stored and maintained by this component for recording statistics of Passport routing control packets which have been sent or received by Topology.
rtgTopStatsEntry: An entry in the rtgTopStatsTable.
rtgTopControlPktRx: This attribute shows the total number of topology routing control packets which have been received by this node from other Passport nodes in the network.
rtgTopControlBytesRx: This attribute shows the total number of topology routing control packet bytes received by this node from other Passport nodes in the network.
rtgTopControlPktTx: This attribute shows the total number of topology routing control packets which have been sent by this node to other Passport nodes in the network.
rtgTopControlBytesTx: This attribute shows the total number of topology routing control packet bytes sent by this node to other Passport nodes in the network.
rtgTopNodeRowStatusTable: *** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of rtgTopNode components.
rtgTopNodeRowStatusEntry: A single entry in the table represents a single rtgTopNode component.
rtgTopNodeRowStatus: This variable is used as the basis for SNMP naming of rtgTopNode components. These components cannot be added nor deleted.
rtgTopNodeComponentName: This variable provides the component's string name for use with the ASCII Console Interface
rtgTopNodeStorageType: This variable represents the storage type value for the rtgTopNode tables.
rtgTopNodeIndex: This variable represents the index for the rtgTopNode tables.
rtgTopNodeOperTable: *** THIS TABLE CURRENTLY NOT IMPLEMENTED *** Rtg Top Node/ Operational This group contains operational data about each node in the Passport network and its connectivity to its neighbours.
rtgTopNodeOperEntry: An entry in the rtgTopNodeOperTable.
rtgTopNodeNodeId: The nodeId is a number that uniquely identifies the Node component instance in the Passport network. It is the identifier used in the routing control packets sent by this node to other Passport nodes in the network. The nodeId, for each node in the networ ...
rtgTopNodeLgRowStatusTable: *** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of rtgTopNodeLg components.
rtgTopNodeLgRowStatusEntry: A single entry in the table represents a single rtgTopNodeLg component.
rtgTopNodeLgRowStatus: This variable is used as the basis for SNMP naming of rtgTopNodeLg components. These components cannot be added nor deleted.
rtgTopNodeLgComponentName: This variable provides the component's string name for use with the ASCII Console Interface
rtgTopNodeLgStorageType: This variable represents the storage type value for the rtgTopNodeLg tables.
rtgTopNodeLgIndex: This variable represents the index for the rtgTopNodeLg tables.
rtgTopNodeLgOperTable: *** THIS TABLE CURRENTLY NOT IMPLEMENTED *** Rtg Top Node/ LinkGroup/ Operational This group contains the operational data stored and maintained by TrunkGroup component for each trunk group attached to a node in the Pa ...
rtgTopNodeLgOperEntry: An entry in the rtgTopNodeLgOperTable.
rtgTopNodeLgDelayMetric: This attribute specifies the outbound cost to forward packets across the trunk group for a delay class of service. It represents the trunk in the trunk group with the lowest round trip delay. A low outbound cost is preferable to a higher value as it is as ...
rtgTopNodeLgTputMetric: This attribute specifies the outbound cost to forward packets across the trunk group for a throughput class of service. It is computed from the combined speed of each link in the trunk group. A low outbound cost is preferable to a higher value as it is as ...
rtgTopNodeLgLnnTable: *** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This attribute is a list of integers which specify the logical network numbers supported by the trunk group. Each of these numbers corresponds with a particular instance of network protocol supported on this sw ...
rtgTopNodeLgLnnEntry: An entry in the rtgTopNodeLgLnnTable.
rtgTopNodeLgLnnValue: This variable represents both the value and the index for the rtgTopNodeLgLnnTable.
rtgTopNodeLgTrkObjRowStatusTable: *** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of rtgTopNodeLgTrkObj components.
rtgTopNodeLgTrkObjRowStatusEntry: A single entry in the table represents a single rtgTopNodeLgTrkObj component.
rtgTopNodeLgTrkObjRowStatus: This variable is used as the basis for SNMP naming of rtgTopNodeLgTrkObj components. These components cannot be added nor deleted.
rtgTopNodeLgTrkObjComponentName: This variable provides the component's string name for use with the ASCII Console Interface
rtgTopNodeLgTrkObjStorageType: This variable represents the storage type value for the rtgTopNodeLgTrkObj tables.
rtgTopNodeLgTrkObjIndex: This variable represents the index for the rtgTopNodeLgTrkObj tables.
rtgTopNodeLgTrkObjOperTable: *** THIS TABLE CURRENTLY NOT IMPLEMENTED *** Rtg Top Node/ LinkGroup/ Trunk/ Operational This group contains the operational data stored and maintained by TplPorTrunk component.
rtgTopNodeLgTrkObjOperEntry: An entry in the rtgTopNodeLgTrkObjOperTable.
rtgTopNodeLgTrkObjMaxReservableBwOut: This attribute displays trunk bandwidth which can be used for reservations on behalf of connections requiring path oriented routing. This bandwidth is displayed in bit/s and has been calculated by concerned trunk path administrator from the trunk bandwidt ...
rtgTopNodeLgTrkObjTrunkCost: This attribute displays trunk cost metric provisioned as trunkCost attribute of a concerned trunk path administrator.
rtgTopNodeLgTrkObjTrunkDelay: This attribute displays one-directional trunk delay measured by trunk during staging. This is half (rounded down to an integer) of delay displayable by attribute of ID aTrmLinkDelay_c.
rtgTopNodeLgTrkObjTrunkSecurity: This attribute displays trunk security metric provisioned as trunkSecurity attribute of a concerned trunk path administrator.
rtgTopNodeLgTrkObjSupportedTrafficTypes: This attribute indicates the type of traffic that can be transmitted on the trunk. There are eight(8) possible traffic types, and the trunk can transmit all of them if desired. The voice, data and video traffic types are defined, and five(5) other traffic ...
rtgTopNodeLgTrkObjTrunkType: This attribute lists the type of the trunk. There can be up to eight(8) types of trunks. The terrestrial and satellite trunk types have been defined, leaving six(6) remaining types that can be defined by the network administration. The set of allowed trun ...
rtgTopNodeLgTrkObjCustomerParameter: This attribute indicates the customer defined parameter for the trunk. Its value, a number from zero(0) to seven(7), is chosen by a network administration to have a meaning specific to their network, thus allowing them to customize the use of their trunks ...
rtgTopNodeLgTrkObjFarEndTrmLkInstance: This attribute indicates identification of the corresponding trunk providing the reverse direction of transmission.
rtgTopNodeLgTrkObjUnresTable: *** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This attribute displays a table. In the first row there are setup priorities. In the second row there are numerators of parts of unreserved bandwidth corresponding to setup priority 0 (first column) through 4 ( ...
rtgTopNodeLgTrkObjUnresEntry: An entry in the rtgTopNodeLgTrkObjUnresTable.
rtgTopNodeLgTrkObjUnresSetupPriorityIndex: This variable represents the next to last index for the rtgTopNodeLgTrkObjUnresTable.
rtgTopNodeLgTrkObjUnresUnreservedBwPartsIndex: This variable represents the final index for the rtgTopNodeLgTrkObjUnresTable.
rtgTopNodeLgTrkObjUnresValue: This variable represents an individual value for the rtgTopNodeLgTrkObjUnresTable.
trmRowStatusTable: This entry controls the addition and deletion of trm components.
trmRowStatusEntry: A single entry in the table represents a single trm component.
trmRowStatus: This variable is used as the basis for SNMP naming of trm components. These components cannot be added nor deleted.
trmComponentName: This variable provides the component's string name for use with the ASCII Console Interface
trmStorageType: This variable represents the storage type value for the trm tables.
trmIndex: This variable represents the index for the trm tables.
trmLkRowStatusTable: *** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of trmLk components.
trmLkRowStatusEntry: A single entry in the table represents a single trmLk component.
trmLkRowStatus: This variable is used as the basis for SNMP naming of trmLk components. These components cannot be added nor deleted.
trmLkComponentName: This variable provides the component's string name for use with the ASCII Console Interface
trmLkStorageType: This variable represents the storage type value for the trmLk tables.
trmLkIndex: This variable represents the index for the trmLk tables.
trmLkOperTable: *** THIS TABLE CURRENTLY NOT IMPLEMENTED *** Trm Lk/ Operational This group of attributes is used to list links. These links are all registered with Transport Resource Manager. They have a status which reflects the current view of the link.
trmLkOperEntry: An entry in the trmLkOperTable.
trmLkStatus: This attribute indicates if the inactive link is disabled, joining, waiting to join, or in standby mode. inactive - The link is known to TRM but is not active. This can mean that it is disabled, or has not yet started to join. joining - The link has reque ...
trmLkThroughput: This attribute indicates the throughput of the link in kbit/s. This value represents a nominal bandwidth available for connectionless traffic, after the maximum reserved for path-oriented traffic has been subtracted from trunk bandwidth. If a trunk speed ...
trmLkDelay: This is the round trip delay of the link in milliseconds. This value represents a nominal delay for connectionless traffic. Connectionless traffic is biased away from trunks carrying path- oriented traffic by increasing this value. The value of this attri ...
trmLkMaxTxUnit: This attribute indicates the maximum data unit in bytes of this link. It represents the maximum frame length (including user data and routing headers) that can be sent on the link.
trmLkLinkComponentName: This attribute indicates the link's component name. A link is either a trunk or a gateway to another module. The component name may be used to obtain additional information from the link system.
trmLkDelayUsec: This attribute indicates the round trip delay of the link in milliseconds. This value represents a nominal delay for connectionless traffic. Connectionless traffic is biased away from trunks carrying path-oriented traffic by increasing this value. The val ...
trmLkFwdStatsTable: *** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This group of attributes is used to display egress statistics collected by packet forwarding on this link. The statistics can be used to monitor congestion conditions and packet discards on a link.
trmLkFwdStatsEntry: An entry in the trmLkFwdStatsTable.
trmLkFciSet: This attribute counts the packets whose FCI bits are set by packet forwarding due to congestion on this link, and when the forwardingPolicy attribute of Routing DpnAddressPlan is set to loadshare or loadspread. This counter wraps around to zero when the m ...
trmLkOverflowAttempts: This attribute counts the number of times DPRS packet forwarding attempts to overflow packets to another link in a link group due to congestion on this link. It is used only when the attribute forwardingPolicy in component rtg dpn is set to the value load ...
trmLkPathOverflowAttempts: This attribute counts the number of times DPRS packet forwarding attempts to overflow packets to another link group due to congestion on the link group of this link. This counter wraps around to zero when the maximum value is reached.
trmLkDiscardCongestedTable: *** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This attribute counts the packets that have been discarded by packet forwarding due to congestion on this link and when the forwardingPolicy attribute of Routing DpnAddressPlan is set to loadshare or loadspread ...
trmLkDiscardCongestedEntry: An entry in the trmLkDiscardCongestedTable.
trmLkDiscardCongestedIndex: This variable represents the trmLkDiscardCongestedTable specific index for the trmLkDiscardCongestedTable.
trmLkDiscardCongestedValue: This variable represents an individual value for the trmLkDiscardCongestedTable.
trmLgRowStatusTable: *** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of trmLg components.
trmLgRowStatusEntry: A single entry in the table represents a single trmLg component.
trmLgRowStatus: This variable is used as the basis for SNMP naming of trmLg components. These components cannot be added nor deleted.
trmLgComponentName: This variable provides the component's string name for use with the ASCII Console Interface
trmLgStorageType: This variable represents the storage type value for the trmLg tables.
trmLgIndex: This variable represents the index for the trmLg tables.
trmLgLkRowStatusTable: *** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of trmLgLk components.
trmLgLkRowStatusEntry: A single entry in the table represents a single trmLgLk component.
trmLgLkRowStatus: This variable is used as the basis for SNMP naming of trmLgLk components. These components cannot be added nor deleted.
trmLgLkComponentName: This variable provides the component's string name for use with the ASCII Console Interface
trmLgLkStorageType: This variable represents the storage type value for the trmLgLk tables.
trmLgLkIndex: This variable represents the index for the trmLgLk tables.
trmLgLkOperTable: *** THIS TABLE CURRENTLY NOT IMPLEMENTED *** Trm Lk/ Operational This group of attributes is used to list links. These links are all registered with Transport Resource Manager. They have a status which reflects the current view of the link.
trmLgLkOperEntry: An entry in the trmLgLkOperTable.
trmLgLkStatus: This attribute indicates if the inactive link is disabled, joining, waiting to join, or in standby mode. inactive - The link is known to TRM but is not active. This can mean that it is disabled, or has not yet started to join. joining - The link has reque ...
trmLgLkThroughput: This attribute indicates the throughput of the link in kbit/s. This value represents a nominal bandwidth available for connectionless traffic, after the maximum reserved for path-oriented traffic has been subtracted from trunk bandwidth. If a trunk speed ...
trmLgLkDelay: This is the round trip delay of the link in milliseconds. This value represents a nominal delay for connectionless traffic. Connectionless traffic is biased away from trunks carrying path- oriented traffic by increasing this value. The value of this attri ...
trmLgLkMaxTxUnit: This attribute indicates the maximum data unit in bytes of this link. It represents the maximum frame length (including user data and routing headers) that can be sent on the link.
trmLgLkLinkComponentName: This attribute indicates the link's component name. A link is either a trunk or a gateway to another module. The component name may be used to obtain additional information from the link system.
trmLgLkDelayUsec: This attribute indicates the round trip delay of the link in milliseconds. This value represents a nominal delay for connectionless traffic. Connectionless traffic is biased away from trunks carrying path-oriented traffic by increasing this value. The val ...
trmLgLkFwdStatsTable: *** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This group of attributes is used to display egress statistics collected by packet forwarding on this link. The statistics can be used to monitor congestion conditions and packet discards on a link.
trmLgLkFwdStatsEntry: An entry in the trmLgLkFwdStatsTable.
trmLgLkFciSet: This attribute counts the packets whose FCI bits are set by packet forwarding due to congestion on this link, and when the forwardingPolicy attribute of Routing DpnAddressPlan is set to loadshare or loadspread. This counter wraps around to zero when the m ...
trmLgLkOverflowAttempts: This attribute counts the number of times DPRS packet forwarding attempts to overflow packets to another link in a link group due to congestion on this link. It is used only when the attribute forwardingPolicy in component rtg dpn is set to the value load ...
trmLgLkPathOverflowAttempts: This attribute counts the number of times DPRS packet forwarding attempts to overflow packets to another link group due to congestion on the link group of this link. This counter wraps around to zero when the maximum value is reached.
trmLgLkDiscardCongestedTable: *** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This attribute counts the packets that have been discarded by packet forwarding due to congestion on this link and when the forwardingPolicy attribute of Routing DpnAddressPlan is set to loadshare or loadspread ...
trmLgLkDiscardCongestedEntry: An entry in the trmLgLkDiscardCongestedTable.
trmLgLkDiscardCongestedIndex: This variable represents the trmLgLkDiscardCongestedTable specific index for the trmLgLkDiscardCongestedTable.
trmLgLkDiscardCongestedValue: This variable represents an individual value for the trmLgLkDiscardCongestedTable.
trmLgLNNRowStatusTable: *** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of trmLgLNN components.
trmLgLNNRowStatusEntry: A single entry in the table represents a single trmLgLNN component.
trmLgLNNRowStatus: This variable is used as the basis for SNMP naming of trmLgLNN components. These components cannot be added nor deleted.
trmLgLNNComponentName: This variable provides the component's string name for use with the ASCII Console Interface
trmLgLNNStorageType: This variable represents the storage type value for the trmLgLNN tables.
trmLgLNNIndex: This variable represents the index for the trmLgLNN tables.
trmLgLNNOperTable: *** THIS TABLE CURRENTLY NOT IMPLEMENTED *** Trm Lg/ LNN/ Operational This group of attributes is the information associated with an address plan.
trmLgLNNOperEntry: An entry in the trmLgLNNOperTable.
trmLgLNNLinkType: This attribute indicates how the LNN is transported over the link group. It can be one of three types: trunk - the LNN is supported by Topology over a Passport to Passport link internal gateway - the LNN is supported by an address plan (but not Topology) ...
trmLgLNNAddressPlanComponentName: This attribute indicates the component name of the address plan which owns the logical network number of this component.
npiRowStatusTable: This entry controls the addition and deletion of npi components.
npiRowStatusEntry: A single entry in the table represents a single npi component.
npiRowStatus: This variable is used as the basis for SNMP naming of npi components. These components cannot be added nor deleted.
npiComponentName: This variable provides the component's string name for use with the ASCII Console Interface
npiStorageType: This variable represents the storage type value for the npi tables.
npiIndex: This variable represents the index for the npi tables.
npiStatsTable: Npi/ Statistics This group of attributes contains the statistics kept for a particular numbering plan indicator. The only statistic present is the total number of DNAs provisioned for the numbering plan.
npiStatsEntry: An entry in the npiStatsTable.
npiTotalDnas: This attribute holds the total number of Dnas that are in the numbering plan. If this attribute is displayed in provisioning mode, the number includes the Dnas that have been added/deleted in that provisioning session, otherwise the number only includes t ...
npiDnaRowStatusTable: *** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of npiDna components.
npiDnaRowStatusEntry: A single entry in the table represents a single npiDna component.
npiDnaRowStatus: This variable is used as the basis for SNMP naming of npiDna components. These components cannot be added nor deleted.
npiDnaComponentName: This variable provides the component's string name for use with the ASCII Console Interface
npiDnaStorageType: This variable represents the storage type value for the npiDna tables.
npiDnaIndex: This variable represents the index for the npiDna tables.
npiDnaInfoTable: *** THIS TABLE CURRENTLY NOT IMPLEMENTED *** Npi/ Dna/ Information This group of attributes contains the attributes for a DNA in the numbering plan.
npiDnaInfoEntry: An entry in the npiDnaInfoTable.
npiDnaDestinationName: This attribute holds the Component Name of the application to which the DNA belongs.

Download IPHost Network Monitor (500 monitors for 30 days, 50 monitors free forever) to start monitoring network devices right now.

MIBs list