Nortel-Magellan-Passport-BaseSnmpMIB Download

vrSnmpRowStatusTable

This entry controls the addition and deletion of vrSnmp components.

vrSnmpRowStatusEntry

A single entry in the table represents a single vrSnmp component.

vrSnmpRowStatus

This variable is used as the basis for SNMP naming of vrSnmp components. These components can be added and deleted.

vrSnmpComponentName

This variable provides the component's string name for use with the ASCII Console Interface

vrSnmpStorageType

This variable represents the storage type value for the vrSnmp tables.

vrSnmpIndex

This variable represents the index for the vrSnmp tables.

vrSnmpProvTable

This group contains provisionable attributes defining the SNMP management entity's capabilities, particularly in regards to standardV1 and V2 traps.

vrSnmpProvEntry

An entry in the vrSnmpProvTable.

vrSnmpV1EnableAuthenTraps

This attribute controls whether the Snmp component will generate V1 authentication failure traps or not. The attribute is derived from rfc1213.

vrSnmpV2EnableAuthenTraps

This attribute controls whether the Snmp component will generate V2 authentication failure traps or not. The attribute is derived from rfc1450.

vrSnmpAlarmsAsTraps

This attribute controls whether the Snmp component will send Alarms as SNMPv1 and SNMPv2 Traps. If enabled, Alarms will be sent as SNMPv2 Traps to target Parties identified in AccessPrivileges components where v2Trap privileges are allowed, and as SNMPv1 ...

vrSnmpIpStack

This attribute controls which IP stack the Snmp component will use to send and receive Snmp traffic for Communites and Parties whose tdomain attribute specifies snmpUdpDomain as the transport protocol. If the value of this attribute is vrIp then Snmp Udp ...

vrSnmpCidInEntTraps

This attribute controls whether the Customer Identifier (CID) will be included in the SNMP Enterprise Traps. If enabled, the CID will be included in the SNMP Enterprise traps.

vrSnmpStateTable

This group contains the three OSI State attributes and the six OSI Status attributes. The descriptions generically indicate what each attribute implies about the component. Note that not all the values and state combinations described here are supported b ...

vrSnmpStateEntry

An entry in the vrSnmpStateTable.

vrSnmpAdminState

This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this ...

vrSnmpOperationalState

This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that t ...

vrSnmpUsageState

This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value b ...

vrSnmpAvailabilityStatus

If supported by the component, this attribute indicates the OSI Availability status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that ei ...

vrSnmpProceduralStatus

If supported by the component, this attribute indicates the OSI Procedural status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that eith ...

vrSnmpControlStatus

If supported by the component, this attribute indicates the OSI Control status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either ...

vrSnmpAlarmStatus

If supported by the component, this attribute indicates the OSI Alarm status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either th ...

vrSnmpStandbyStatus

If supported by the component, this attribute indicates the OSI Standby status of the component. The value notSet indicates that either the attribute is not supported or that none of the status conditions described below are present. Note that this is a n ...

vrSnmpUnknownStatus

This attribute indicates the OSI Unknown status of the component. The value false indicates that all of the other OSI State and Status attribute values can be considered accurate. The value true indicates that the actual state of the component is not know ...

vrSnmpStatsTable

This attribute group contains miscellaneous SNMP management entity operational attributes. Statistics in the group are derived from rfc 1450 and rfc 1213. Also included in the group are statistics due to non-SNMP authorization errors, and non-SNMP statist ...

vrSnmpStatsEntry

An entry in the vrSnmpStatsTable.

vrSnmpLastOrChange

This attribute indicates the value of sysUpTime (in 1/100's of a second) at the time of the most recent change to a SNMPv2 Object Resource entry. The attribute forms part of the SNMPv2 MIB Base Object Resource Group found in rfc1450.

vrSnmpTrapsProcessed

This counter contains the cumulative number of Trap Indications and Alarm Indications received from the DCS Collectors since the processor last restarted. These Traps and Alarms are sent to SNMPv1 Managers and SNMPv2 Parties which are configured to receiv ...

vrSnmpTrapsDiscarded

This counter contains the cumulative number of Trap Indications and Alarm Indications discarded since the processor last restarted. They are discarded when the Snmp component is locked or disabled.

vrSnmpLastAuthFailure

This attribute indicates the value of sysUpTime (in 1/100's of a second) at the time the last authentication failure. This attribute is a non-SNMP statistic.

vrSnmpMgrOfLastAuthFailure

This attribute indicates the IP address of the manager station that caused the last authentication failure. This attribute is a non-SNMP statistic.

vrSnmpSysRowStatusTable

This entry controls the addition and deletion of vrSnmpSys components.

vrSnmpSysRowStatusEntry

A single entry in the table represents a single vrSnmpSys component.

vrSnmpSysRowStatus

This variable is used as the basis for SNMP naming of vrSnmpSys components. These components cannot be added nor deleted.

vrSnmpSysComponentName

This variable provides the component's string name for use with the ASCII Console Interface

vrSnmpSysStorageType

This variable represents the storage type value for the vrSnmpSys tables.

vrSnmpSysIndex

This variable represents the index for the vrSnmpSys tables.

vrSnmpSysProvTable

The group contains provisionable attributes relating to the SNMP System Group. The attributes are derived from rfc1213.

vrSnmpSysProvEntry

An entry in the vrSnmpSysProvTable.

vrSnmpSysContact

This attribute identifies the contact person for this managed node, together with information on how to contact this person.

vrSnmpSysName

This attribute identifies the administratively assigned name for this managed node. By convention, it is the node's fully qualified domain name.

vrSnmpSysLocation

This attribute identifies the physical location of this node. For example, 'telephone closet, third floor'.

vrSnmpSysOpTable

The group contains operational attributes relating to the SNMP System Group. The attributes are derived from rfc1213.

vrSnmpSysOpEntry

An entry in the vrSnmpSysOpTable.

vrSnmpSysDescription

This attribute presents a textual description of the entity. This value should include the full name and version identification of the system's hardware type, software operating-system, and networking software.

vrSnmpSysObjectId

This attribute identifies the vendor's authoritative identification of the network management subsystem contained in the entity. This value is allocated within the Structure of Management Information (SMI) enterprises subtree (1.3.6.1.4.1) and provides an ...

vrSnmpSysUpTime

This attribute represents the time (in hundredths of a second) since the network management portion of the system was last re- initialized.

vrSnmpSysServices

This attribute indicates the set of services that this entity primarily offers. The value is a sum. This sum initially takes the value zero, then, for each layer, L, in the range 1 through 7, that this node performs transactions for, 2 raised to (L-1) is ...

vrSnmpComRowStatusTable

This entry controls the addition and deletion of vrSnmpCom components.

vrSnmpComRowStatusEntry

A single entry in the table represents a single vrSnmpCom component.

vrSnmpComRowStatus

This variable is used as the basis for SNMP naming of vrSnmpCom components. These components can be added and deleted.

vrSnmpComComponentName

This variable provides the component's string name for use with the ASCII Console Interface

vrSnmpComStorageType

This variable represents the storage type value for the vrSnmpCom tables.

vrSnmpComIndex

This variable represents the index for the vrSnmpCom tables.

vrSnmpComProvTable

The group contains provisionable attributes relating to SNMPv1 Communities.

vrSnmpComProvEntry

An entry in the vrSnmpComProvTable.

vrSnmpComCommunityString

This attribute is the SNMPv1 Community name. The value of this attribute is used to authenticate SNMP messages received from SNMPv1 management entities, and is placed in SNMP messages sent out by the SNMPv1 network management entity. The string 'public' i ...

vrSnmpComAccessMode

Once the sending SNMP entity is authenticated as a member of a community, the community access mode determines what level of access it has for each object in its view.

vrSnmpComViewIndex

The community view index selects an entry in the SnmpViewTable that this community will use. This index must correspond to the first index of one of the SnmpView entries. Note that SNMPv2 Views are used for SNMPv1 communities, as the SNMPv2 View model is ...

vrSnmpComTDomain

This attribute indicates the kind of transport service by which the community receives and sends network management traffic. The combination of communityString and tDomain attributes must be unique across all Communies

vrSnmpComManRowStatusTable

This entry controls the addition and deletion of vrSnmpComMan components.

vrSnmpComManRowStatusEntry

A single entry in the table represents a single vrSnmpComMan component.

vrSnmpComManRowStatus

This variable is used as the basis for SNMP naming of vrSnmpComMan components. These components can be added and deleted.

vrSnmpComManComponentName

This variable provides the component's string name for use with the ASCII Console Interface

vrSnmpComManStorageType

This variable represents the storage type value for the vrSnmpComMan tables.

vrSnmpComManIndex

This variable represents the index for the vrSnmpComMan tables.

vrSnmpComManProvTable

The group contains provisionable attributes relating to an SNMPv1 Community Manager.

vrSnmpComManProvEntry

An entry in the vrSnmpComManProvTable.

vrSnmpComManTransportAddress

This attribute is the transport service address of SNMPv1 Manager, formatted according to the value of SnmpV1Community tDomain. The only currently supported format is that of a UDP Transport Address. It must be of the form 'IpAddress-UDP Port', where UDP ...

vrSnmpComManPrivileges

This attribute identifies the access privileges which govern what management operations the SNMPv1 Manager may perform. v1trap operations are only allowed if the Community accessMode is readOnly or readWrite. set operations are only allowed if the Communi ...

vrSnmpAclRowStatusTable

This entry controls the addition and deletion of vrSnmpAcl components.

vrSnmpAclRowStatusEntry

A single entry in the table represents a single vrSnmpAcl component.

vrSnmpAclRowStatus

This variable is used as the basis for SNMP naming of vrSnmpAcl components. These components can be added and deleted.

vrSnmpAclComponentName

This variable provides the component's string name for use with the ASCII Console Interface

vrSnmpAclStorageType

This variable represents the storage type value for the vrSnmpAcl tables.

vrSnmpAclTargetIndex

This variable represents an index for the vrSnmpAcl tables.

vrSnmpAclSubjectIndex

This variable represents an index for the vrSnmpAcl tables.

vrSnmpAclResourcesIndex

This variable represents an index for the vrSnmpAcl tables.

vrSnmpAclProvTable

This group contains provisionable attributes relating to SNMPv2 Access Privilege Table Entries. The provisionable attributes are derived from rfc1445, and rfc1447.

vrSnmpAclProvEntry

An entry in the vrSnmpAclProvTable.

vrSnmpAclPrivileges

This attribute identifies the access privileges which govern what management operations a particular target part may perform with respect to a particular SNMPv2 context when requested by a particular subject party. Gets and set operations are only permitt ...

vrSnmpAclRowStorageType

This attribute indicates the storage type for this conceptual row in the SNMPv2 aclTable. This is a constant - nonVolatile.

vrSnmpAclStdRowStatus

This attribute indicates the status of this conceptual row in the SNMPv2 aclTable. This is a constant - active.

vrSnmpPartyRowStatusTable

This entry controls the addition and deletion of vrSnmpParty components.

vrSnmpPartyRowStatusEntry

A single entry in the table represents a single vrSnmpParty component.

vrSnmpPartyRowStatus

This variable is used as the basis for SNMP naming of vrSnmpParty components. These components can be added and deleted.

vrSnmpPartyComponentName

This variable provides the component's string name for use with the ASCII Console Interface

vrSnmpPartyStorageType

This variable represents the storage type value for the vrSnmpParty tables.

vrSnmpPartyIdentityIndex

This variable represents the index for the vrSnmpParty tables.

vrSnmpPartyProvTable

This group contains provisionable attributes relating to SNMPv2 Party Table Entries.The attributes are derived from rfc1321, rfc1445, rfc1446, rfc1447, and rfc1450.

vrSnmpPartyProvEntry

An entry in the vrSnmpPartyProvTable.

vrSnmpPartyStdIndex

This attribute represents the SNMPv2 Party table partyIndex. This index is unique and its value is automatically selected for you.

vrSnmpPartyTDomain

This attribute indicates the kind of transport service by which the party receives and sends network management traffic.

vrSnmpPartyTransportAddress

This attribute is the transport service address by which the party receives network management traffic, formatted according to the corresponding value of tDomain. For local (Agent) Parties (SnmpV2PartyEntryProv local = true) this is the address of the Vir ...

vrSnmpPartyMaxMessageSize

This attribute is the maximum length in octets of a SNMPv2 message that this party will accept. For local (Agent) Parties (SnmpV2PartyEntryProv local = true) this cannot be set to greater than the fixed Agent maximum of 1400. For non-local (Manager) Parti ...

vrSnmpPartyLocal

This attribute indicates whether this party executes at this SNMPv2 entity. If this attribute has a value of true, then the SNMPv2 entity is an Agent, and will listen for SNMPv2 messages on the ipAddress associated with this party. If this attribute has t ...

vrSnmpPartyAuthProtocol

This attribute indicates the authentication protocol by which all messages generated by the party are authenticated as to origin and integrity. The value noAuth signifies that messages generated by the party are not authenticated.

vrSnmpPartyAuthPrivate

This attribute is the Party's private authentication key. As with passwords this attribute cannot be displayed by the display command and is stored in encoded form. For Parties with an authentication protocol, this key must be provisioned.

vrSnmpPartyAuthPublic

This attribute is the Party's public authentication key. It is the 'public information' used by the Party's authentication protocol.

vrSnmpPartyAuthLifetime

This attribute represents the maximum acceptable delivery delay (lifetime) in seconds for messages from this Party.

vrSnmpPartyPrivProtocol

This attribute identifies the privacy protocol by which all protocol messages received by the party are protected from disclosure. The value noPriv signifies that messages received by the party are not protected. As DES is not supported, this is a constan ...

vrSnmpPartyRowStorageType

The attribute indicates the storage type for this conceptual row in the SNMPv2 aclTable. This is a constant - nonVolatile.

vrSnmpPartyStdRowStatus

This attribute indicates the status of this conceptual row in the SNMPv2 partyTable. This is a constant - active.

vrSnmpPartyOpTable

This group contains Operational Attributes relating SNMPv2 parties. based upon rfc1321, rfc1445, rfc1446, rfc1447, and rfc1450.

vrSnmpPartyOpEntry

An entry in the vrSnmpPartyOpTable.

vrSnmpPartyTrapNumbers

This attribute is a count of the total number of SNMPv2 traps sent to a SNMPv2 non-Local (Manager) party (SnmpV2PartyEntryProv local = false). This counter is never incremented for Local (Agent) parties (SnmpV2PartyEntryProv local = true).

vrSnmpPartyAuthClock

This attribute is the authentication clock which represents the notion of current time specific to a Party. This value is not permitted to 'roll-over'. In other words once it reaches the maximum it stays there, unless explicitly decremented.

vrSnmpConRowStatusTable

This entry controls the addition and deletion of vrSnmpCon components.

vrSnmpConRowStatusEntry

A single entry in the table represents a single vrSnmpCon component.

vrSnmpConRowStatus

This variable is used as the basis for SNMP naming of vrSnmpCon components. These components can be added and deleted.

vrSnmpConComponentName

This variable provides the component's string name for use with the ASCII Console Interface

vrSnmpConStorageType

This variable represents the storage type value for the vrSnmpCon tables.

vrSnmpConIdentityIndex

This variable represents the index for the vrSnmpCon tables.

vrSnmpConProvTable

This group contains provisionable attributes relating to SNMPv2 Contexts Table Entries. The attributes are derived from rfc1445, and rfc1447.

vrSnmpConProvEntry

An entry in the vrSnmpConProvTable.

vrSnmpConStdIndex

This attribute represents the SNMPv2 Contexts table contextIndex. This index is unique and its value is automatically selected for you.

vrSnmpConLocal

This attribute indicates whether this context is realized by this SNMPv2 entity. This is a constant - true.

vrSnmpConViewIndex

The SNMPv2 Contexts view index selects a particular MIB view entry in the SNMPv2 viewTable. This index must correspond to the first replication index (index) of one of the entries in the SnmpView. The value of the localTime attribute provides further info ...

vrSnmpConLocalTime

This attribute identifies the temporal context of the management information in the MIB view identified by the viewIndex attribute. This is a constant - currentTime. The SNMPv2 alternatives restartTime and cacheTime are not currently supported.

vrSnmpConRowStorageType

The attribute indicates the storage type for this conceptual row in the SNMPv2 contextTable. This is a constant - nonVolatile.

vrSnmpConStdRowStatus

This attribute indicates the status of this conceptual row in the SNMPv2 aclTable. This is a constant - active.

vrSnmpViewRowStatusTable

This entry controls the addition and deletion of vrSnmpView components.

vrSnmpViewRowStatusEntry

A single entry in the table represents a single vrSnmpView component.

vrSnmpViewRowStatus

This variable is used as the basis for SNMP naming of vrSnmpView components. These components can be added and deleted.

vrSnmpViewComponentName

This variable provides the component's string name for use with the ASCII Console Interface

vrSnmpViewStorageType

This variable represents the storage type value for the vrSnmpView tables.

vrSnmpViewIndex

This variable represents an index for the vrSnmpView tables.

vrSnmpViewSubtreeIndex

This variable represents an index for the vrSnmpView tables.

vrSnmpViewProvTable

This group contains provisionable attributes relating to SNMPv2 View Table SubTrees. The attributes are derived from rfc1445, and rfc1447.

vrSnmpViewProvEntry

An entry in the vrSnmpViewProvTable.

vrSnmpViewMask

This attribute is the View mask which, in combination with the corresponding instance of SnmpView subTree, defines a family of view subtrees. Each bit of this bit mask corresponds to a subindentifier of SnmpView subTree, with the most significant bit of t ...

vrSnmpViewType

This attribute indicates whether the particular family of view subtrees is included or excluded in the SNMPv2 context's (or SNMPv1 community's) MIB view. The value 'includedSubtree' indicates that the corresponding instances of subTree and mask define a f ...

vrSnmpViewRowStorageType

The attribute indicates the storage type for this conceptual row in the SNMPv2 viewTable. This is a constant - nonVolatile.

vrSnmpViewStdRowStatus

This attribute indicates the status of this conceptual row in the SNMPv2 snmpViewTable. This is a constant - active.

vrSnmpOrRowStatusTable

This entry controls the addition and deletion of vrSnmpOr components.

vrSnmpOrRowStatusEntry

A single entry in the table represents a single vrSnmpOr component.

vrSnmpOrRowStatus

This variable is used as the basis for SNMP naming of vrSnmpOr components. These components cannot be added nor deleted.

vrSnmpOrComponentName

This variable provides the component's string name for use with the ASCII Console Interface

vrSnmpOrStorageType

This variable represents the storage type value for the vrSnmpOr tables.

vrSnmpOrIndex

This variable represents the index for the vrSnmpOr tables.

vrSnmpOrOrTable

The attributes of this group describe a MIB currently supported by the SNMP agent. SNMP managers make use of these entries to determine what is supported. The group is derived from rfc 1450.

vrSnmpOrOrEntry

An entry in the vrSnmpOrOrTable.

vrSnmpOrId

This attribute represents the authoritative identification of a dynamically-configurable management entity object resource. This is a MIB Object Identifier.

vrSnmpOrDescr

This attribute represents the textual description of a dynamically- configurable management entity object resource. This is an ASCII description of a supported MIB.

vrSnmpV2StatsRowStatusTable

This entry controls the addition and deletion of vrSnmpV2Stats components.

vrSnmpV2StatsRowStatusEntry

A single entry in the table represents a single vrSnmpV2Stats component.

vrSnmpV2StatsRowStatus

This variable is used as the basis for SNMP naming of vrSnmpV2Stats components. These components cannot be added nor deleted.

vrSnmpV2StatsComponentName

This variable provides the component's string name for use with the ASCII Console Interface

vrSnmpV2StatsStorageType

This variable represents the storage type value for the vrSnmpV2Stats tables.

vrSnmpV2StatsIndex

This variable represents the index for the vrSnmpV2Stats tables.

vrSnmpV2StatsStatsTable

This attribute group contains the collection of statistics as defined by SNMPv2 providing basic instrumentation of a SNMPv2 Agent. The group is derived from rfc 1450. As the implementation is fully bilingual in regards to Snmp V2/V1, statistics which appl ...

vrSnmpV2StatsStatsEntry

An entry in the vrSnmpV2StatsStatsTable.

vrSnmpV2StatsPackets

This attribute represents the total number of SNMP messages received by the SNMP management entity from the transport service. This has the same value as inPackets in the SnmpMibIIStatsOp group.

vrSnmpV2StatsEncodingErrors

This attribute represents the total number of SNMP messages received by the SNMP management entity which were improperly BER encoded or had an invalid ASN.1 syntax. This has the same value as inAsnParseErrs in the SnmpMibIIStatsOp group.

vrSnmpV2StatsUnknownSrcParties

This attribute represents the total number of SNMPv2 messages received by the SNMP management entity for which the message source Party was not locally recognized.

vrSnmpV2StatsBadAuths

This attribute represents the total number of SNMPv2 messages received by the SNMP management entity for which the message authentication protocol did not match that of the local source Party.

vrSnmpV2StatsNotInLifetime

This attribute represents the total number of SNMPv2 messages received by the SNMP management entity for which the message source TimeStamp was less than the combination of the local source Party's clock and lifetime.

vrSnmpV2StatsWrongDigestValues

This attribute represents the total number of SNMPv2 messages received by the SNMP management entity for which the message authentication Digest Value was invalid.

vrSnmpV2StatsUnknownContexts

This attribute represents the total number of SNMPv2 messages received by the SNMP management entity for which the message Context was not locally known.

vrSnmpV2StatsBadOperations

This attribute represents the total number of SNMPv2 messages received by the SNMP management entity for which the PDU type was not allowed in the local Access Privileges Entry.

vrSnmpV2StatsSilentDrops

This attribute represents the total number of SNMPv2 messages received by the SNMP management entity which were silently ignored because an alternate response message was greater than a local constraint or greater than the maximum message size allowed for ...

vrSnmpV1StatsRowStatusTable

This entry controls the addition and deletion of vrSnmpV1Stats components.

vrSnmpV1StatsRowStatusEntry

A single entry in the table represents a single vrSnmpV1Stats component.

vrSnmpV1StatsRowStatus

This variable is used as the basis for SNMP naming of vrSnmpV1Stats components. These components cannot be added nor deleted.

vrSnmpV1StatsComponentName

This variable provides the component's string name for use with the ASCII Console Interface

vrSnmpV1StatsStorageType

This variable represents the storage type value for the vrSnmpV1Stats tables.

vrSnmpV1StatsIndex

This variable represents the index for the vrSnmpV1Stats tables.

vrSnmpV1StatsStatsTable

This attribute group contains the collection of statistics as defined by SNMPv2 providing basic instrumentation of a SNMPv2 Agent which also implements SNMPv1. The group is derived from rfc 1450.

vrSnmpV1StatsStatsEntry

An entry in the vrSnmpV1StatsStatsTable.

vrSnmpV1StatsBadCommunityNames

This attribute counts the SNMPv1 messages received by the SNMP management entity which had an unknown SNMPv1 Community string. This has the same value as the attribute inBadCommunityNames under the SnmpMibIIStats component.

vrSnmpV1StatsBadCommunityUses

This attribute counts the SNMPv1 messages received by the SNMP management entity which attempted to perform an operation not allowed for the indicated SNMPv1 Community. This has the same value as the attribute inBadCommunityUses under the SnmpMibIIStats c ...

vrSnmpMibIIStatsRowStatusTable

This entry controls the addition and deletion of vrSnmpMibIIStats components.

vrSnmpMibIIStatsRowStatusEntry

A single entry in the table represents a single vrSnmpMibIIStats component.

vrSnmpMibIIStatsRowStatus

This variable is used as the basis for SNMP naming of vrSnmpMibIIStats components. These components cannot be added nor deleted.

vrSnmpMibIIStatsComponentName

This variable provides the component's string name for use with the ASCII Console Interface

vrSnmpMibIIStatsStorageType

This variable represents the storage type value for the vrSnmpMibIIStats tables.

vrSnmpMibIIStatsIndex

This variable represents the index for the vrSnmpMibIIStats tables.

vrSnmpMibIIStatsStatsTable

This attribute group contains the collection of statistics as defined by MIB II providing basic instrumentation of a SNMP Agent. The group is derived from rfc 1213. Statistics which are only relevant for SNMP Managers do not appear.

vrSnmpMibIIStatsStatsEntry

An entry in the vrSnmpMibIIStatsStatsTable.

vrSnmpMibIIStatsInPackets

This attribute represents the total number of SNMP messages received by the SNMP management entity.

vrSnmpMibIIStatsInBadCommunityNames

This attribute counts the SNMPv1 messages received by the SNMP management entity which had an unknown SNMPv1 Community string. This has the same value as the attribute badCommunityNames under the SnmpV1Stats component.

vrSnmpMibIIStatsInBadCommunityUses

This attribute counts the SNMPv1 messages received by the SNMP management entity which attempted to perform an operation not allowed for the indicated SNMPv1 Community. This has the same value as the attribute badCommunityUses under the SnmpV1Stats compon ...

vrSnmpMibIIStatsInAsnParseErrs

This attribute counts the SNMP messages received by the SNMP management entity which were improperly BER encoded or had an invalid ASN.1 syntax.

vrSnmpMibIIStatsOutPackets

This attribute counts the SNMP messages transmitted by the SNMP management entity.

vrSnmpMibIIStatsInBadVersions

This attribute counts the SNMPv1 messages received by the SNMP management entity with an invalid SNMP version number.

vrSnmpMibIIStatsInTotalReqVars

This attribute counts the MIB objects successfully retrieved by Get, and Get-Next requests.

vrSnmpMibIIStatsInTotalSetVars

This attribute counts the MIB objects successfully Set by SNMP requests.

vrSnmpMibIIStatsInGetRequests

This attribute counts the Get requests accepted and processed by the SNMP management entity.

vrSnmpMibIIStatsInGetNexts

This attribute counts the Get-Next requests accepted and processed by the SNMP management entity.

vrSnmpMibIIStatsInSetRequests

This attribute counts the Set requests accepted and processed by the SNMP management entity.

vrSnmpMibIIStatsOutTooBigs

This attribute counts the responses generated by the SNMP management entity with an error-status field of tooBig.

vrSnmpMibIIStatsOutNoSuchNames

This attribute counts the SNMPv1 responses generated by the SNMP management entity with an error status field of noSuchName.

vrSnmpMibIIStatsOutBadValues

This attribute counts the SNMPv1 responses generated by the SNMP management entity with an error status field of badValue.

vrSnmpMibIIStatsOutGenErrs

This attribute counts the SNMP responses generated by the SNMP management entity with an error-status field of genErr.

vrSnmpMibIIStatsOutGetResponses

This attribute counts the Get responses generated by the SNMP management entity.

vrSnmpMibIIStatsOutTraps

This attribute counts the Traps generated by the SNMP management entity.

vrInitSnmpConfigRowStatusTable

This entry controls the addition and deletion of vrInitSnmpConfig components.

vrInitSnmpConfigRowStatusEntry

A single entry in the table represents a single vrInitSnmpConfig component.

vrInitSnmpConfigRowStatus

This variable is used as the basis for SNMP naming of vrInitSnmpConfig components. These components can be added and deleted.

vrInitSnmpConfigComponentName

This variable provides the component's string name for use with the ASCII Console Interface

vrInitSnmpConfigStorageType

This variable represents the storage type value for the vrInitSnmpConfig tables.

vrInitSnmpConfigIndex

This variable represents the index for the vrInitSnmpConfig tables.

vrInitSnmpConfigProvTable

This group contains provisionable attributes required for the definition of initial SNMPv2 parties, contexts, views, and access control policies, as defined in rfc1447.

vrInitSnmpConfigProvEntry

An entry in the vrInitSnmpConfigProvTable.

vrInitSnmpConfigAgentAddress

This attribute is the address of the Virtual Router where the initial Agent parties will receive network management traffic. It is used to initialize the transport address of the initial local parties and also is used to define initial party and context i ...

vrInitSnmpConfigManagerAddress

This attribute is the address of the SNMPv2 manager. It is used to initialize the transport address of the initial non-local parties. The format of the managerAddress is an IpAddress.