Nortel-Magellan-Passport-DisdnJapanInsMIB Download

dataSigChanInsRowStatusTable

This entry controls the addition and deletion of dataSigChanIns components.

dataSigChanInsRowStatusEntry

A single entry in the table represents a single dataSigChanIns component.

dataSigChanInsRowStatus

This variable is used as the basis for SNMP naming of dataSigChanIns components. These components can be added and deleted.

dataSigChanInsComponentName

This variable provides the component's string name for use with the ASCII Console Interface

dataSigChanInsStorageType

This variable represents the storage type value for the dataSigChanIns tables.

dataSigChanInsIndex

This variable represents the index for the dataSigChanIns tables.

dataSigChanInsL2Table

This group represents the provisionable Layer 2 attributes of the Q931 CCITT protocol.

dataSigChanInsL2Entry

An entry in the dataSigChanInsL2Table.

dataSigChanInsT23

This attribute specifies the layer2 enable request timer.

dataSigChanInsT200

This attribute specifies the maximum time between a layer 2 frame and its acknowledgement

dataSigChanInsN200

This attribute specifies the maximum number of re-transmissions of a layer2 frame.

dataSigChanInsT203

This attribute specifies the maximum time that a no layer 2 traffic situation can last. Expiry triggers a check on whether the far end is a live.

dataSigChanInsN201

This attribute specifies the maximum number of octets in an information field.

dataSigChanInsCircuitSwitchedK

This attribute specifies the maximum number of frames for B channel use.

dataSigChanInsProvTable

This group defines the general options of the d-channel signalling link.

dataSigChanInsProvEntry

An entry in the dataSigChanInsProvTable.

dataSigChanInsSide

This attribute specifies whether the layer 2 HDLC interface is the network or user side of the connection.

dataSigChanInsOperTable

This group provides the operational attributes for the signalling protocol.

dataSigChanInsOperEntry

An entry in the dataSigChanInsOperTable.

dataSigChanInsActiveChannels

This attribute indicates the number of currently active channels. This includes data and voice channels.

dataSigChanInsPeakActiveChannels

This attribute indicates the maximum number of channels that have been active on this signalling channel during the last polling period.

dataSigChanInsDChanStatus

This attribute indicates the state of the D-channel. outOfService means that there is no layer 2 or layer 3 connectivity to the PBX. establishing means that the signalling channel is attempting to stage the layer 2. established means that the layer 2 is e ...

dataSigChanInsToolsTable

This group contains a series of operational attributes which turn on and off several kinds of tracing.

dataSigChanInsToolsEntry

An entry in the dataSigChanInsToolsTable.

dataSigChanInsTracing

This attribute defines which types of tracing are active for this signalling channel. The tracing messages are sent to the debug stream. To see the messages the agentQueue attribute in Col/debug must be greater than 0 and a Telnet NMIS session must list ...

dataSigChanInsFramerRowStatusTable

This entry controls the addition and deletion of dataSigChanInsFramer components.

dataSigChanInsFramerRowStatusEntry

A single entry in the table represents a single dataSigChanInsFramer component.

dataSigChanInsFramerRowStatus

This variable is used as the basis for SNMP naming of dataSigChanInsFramer components. These components cannot be added nor deleted.

dataSigChanInsFramerComponentName

This variable provides the component's string name for use with the ASCII Console Interface

dataSigChanInsFramerStorageType

This variable represents the storage type value for the dataSigChanInsFramer tables.

dataSigChanInsFramerIndex

This variable represents the index for the dataSigChanInsFramer tables.

dataSigChanInsFramerProvTable

This group contains the base provisioning data for the Framer component. Application or hardware interface specific provisioning data is contained in other provisionable Framer groups.

dataSigChanInsFramerProvEntry

An entry in the dataSigChanInsFramerProvTable.

dataSigChanInsFramerInterfaceName

This attribute contains a hardware component name. The attribute associates the application with a specific link. This defines the module processor on which Framer's parent component (as well as Framer itself) will run.

dataSigChanInsFramerStateTable

This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses ...

dataSigChanInsFramerStateEntry

An entry in the dataSigChanInsFramerStateTable.

dataSigChanInsFramerAdminState

This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this ...

dataSigChanInsFramerOperationalState

This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that t ...

dataSigChanInsFramerUsageState

This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value b ...

dataSigChanInsFramerStatsTable

This group contains the operational statistics data for a Framer component.

dataSigChanInsFramerStatsEntry

An entry in the dataSigChanInsFramerStatsTable.

dataSigChanInsFramerFrmToIf

This attribute counts the number of frames transmitted to the link interface by Framer. This count wraps to zero after reaching its maximum value.

dataSigChanInsFramerFrmFromIf

This attribute counts the number of frames received from the link interface by Framer. This count wraps to zero after reaching its maximum value.

dataSigChanInsFramerOctetFromIf

The number of bytes received from the link interface by Framer.

dataSigChanInsFramerAborts

This attribute counts the total number of aborts received. This count wraps to zero after reaching its maximum value.

dataSigChanInsFramerCrcErrors

This attribute counts the total number of frames with CRC errors. This count wraps to zero after reaching its maximum value.

dataSigChanInsFramerLrcErrors

This attribute counts the total number of frames with LRC errors. This count wraps to zero after reaching its maximum value.

dataSigChanInsFramerNonOctetErrors

This attribute counts the total number of frames that were non octet aligned. This count wraps to zero after reaching its maximum value.

dataSigChanInsFramerOverruns

This attribute counts the total number of frames received from the link for which overruns occurred. This count wraps to zero after reaching its maximum value.

dataSigChanInsFramerUnderruns

This attribute counts the total number of frames transmitted to the link for which underruns occurred. This count wraps to zero after reaching its maximum value.

dataSigChanInsFramerLargeFrmErrors

This attribute counts the total number of frames received which were too large. The frame was longer than 500 bytes. This count wraps to zero after reaching its maximum value.