Nortel-Magellan-Passport-DisdnNI2MIB Download

dataSigChanNi2RowStatusTable

This entry controls the addition and deletion of dataSigChanNi2 components.

dataSigChanNi2RowStatusEntry

A single entry in the table represents a single dataSigChanNi2 component.

dataSigChanNi2RowStatus

This variable is used as the basis for SNMP naming of dataSigChanNi2 components. These components can be added and deleted.

dataSigChanNi2ComponentName

This variable provides the component's string name for use with the ASCII Console Interface

dataSigChanNi2StorageType

This variable represents the storage type value for the dataSigChanNi2 tables.

dataSigChanNi2Index

This variable represents the index for the dataSigChanNi2 tables.

dataSigChanNi2L2Table

This group represents the provisionable Layer 2 attributes of the Q931 CCITT protocol.

dataSigChanNi2L2Entry

An entry in the dataSigChanNi2L2Table.

dataSigChanNi2T23

This attribute specifies the layer2 enable request timer.

dataSigChanNi2T200

This attribute specifies the maximum time between a layer 2 frame and its acknowledgement

dataSigChanNi2N200

This attribute specifies the maximum number of re-transmissions of a layer2 frame.

dataSigChanNi2T203

This attribute specifies the maximum time that a no layer 2 traffic situation can last. Expiry triggers a check on whether the far end is a live.

dataSigChanNi2N201

This attribute specifies the maximum number of octets in an information field.

dataSigChanNi2CircuitSwitchedK

This attribute specifies the maximum number of frames for B channel use.

dataSigChanNi2ProvTable

This group defines the general options of the d-channel signalling link.

dataSigChanNi2ProvEntry

An entry in the dataSigChanNi2ProvTable.

dataSigChanNi2Side

This attribute specifies whether the layer 2 HDLC interface is the network or user side of the connection.

dataSigChanNi2OperTable

This group provides the operational attributes for the signalling protocol.

dataSigChanNi2OperEntry

An entry in the dataSigChanNi2OperTable.

dataSigChanNi2ActiveChannels

This attribute indicates the number of currently active channels. This includes data and voice channels.

dataSigChanNi2PeakActiveChannels

This attribute indicates the maximum number of channels that have been active on this signalling channel during the last polling period.

dataSigChanNi2DChanStatus

This attribute indicates the state of the D-channel. outOfService means that there is no layer 2 or layer 3 connectivity to the PBX. establishing means that the signalling channel is attempting to stage the layer 2. established means that the layer 2 is e ...

dataSigChanNi2ToolsTable

This group contains a series of operational attributes which turn on and off several kinds of tracing.

dataSigChanNi2ToolsEntry

An entry in the dataSigChanNi2ToolsTable.

dataSigChanNi2Tracing

This attribute defines which types of tracing are active for this signalling channel. The tracing messages are sent to the debug stream. To see the messages the agentQueue attribute in Col/debug must be greater than 0 and a Telnet NMIS session must list ...

dataSigChanNi2FramerRowStatusTable

This entry controls the addition and deletion of dataSigChanNi2Framer components.

dataSigChanNi2FramerRowStatusEntry

A single entry in the table represents a single dataSigChanNi2Framer component.

dataSigChanNi2FramerRowStatus

This variable is used as the basis for SNMP naming of dataSigChanNi2Framer components. These components cannot be added nor deleted.

dataSigChanNi2FramerComponentName

This variable provides the component's string name for use with the ASCII Console Interface

dataSigChanNi2FramerStorageType

This variable represents the storage type value for the dataSigChanNi2Framer tables.

dataSigChanNi2FramerIndex

This variable represents the index for the dataSigChanNi2Framer tables.

dataSigChanNi2FramerProvTable

This group contains the base provisioning data for the Framer component. Application or hardware interface specific provisioning data is contained in other provisionable Framer groups.

dataSigChanNi2FramerProvEntry

An entry in the dataSigChanNi2FramerProvTable.

dataSigChanNi2FramerInterfaceName

This attribute contains a hardware component name. The attribute associates the application with a specific link. This defines the module processor on which Framer's parent component (as well as Framer itself) will run.

dataSigChanNi2FramerStateTable

This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses ...

dataSigChanNi2FramerStateEntry

An entry in the dataSigChanNi2FramerStateTable.

dataSigChanNi2FramerAdminState

This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this ...

dataSigChanNi2FramerOperationalState

This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that t ...

dataSigChanNi2FramerUsageState

This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value b ...

dataSigChanNi2FramerStatsTable

This group contains the operational statistics data for a Framer component.

dataSigChanNi2FramerStatsEntry

An entry in the dataSigChanNi2FramerStatsTable.

dataSigChanNi2FramerFrmToIf

This attribute counts the number of frames transmitted to the link interface by Framer. This count wraps to zero after reaching its maximum value.

dataSigChanNi2FramerFrmFromIf

This attribute counts the number of frames received from the link interface by Framer. This count wraps to zero after reaching its maximum value.

dataSigChanNi2FramerOctetFromIf

The number of bytes received from the link interface by Framer.

dataSigChanNi2FramerAborts

This attribute counts the total number of aborts received. This count wraps to zero after reaching its maximum value.

dataSigChanNi2FramerCrcErrors

This attribute counts the total number of frames with CRC errors. This count wraps to zero after reaching its maximum value.

dataSigChanNi2FramerLrcErrors

This attribute counts the total number of frames with LRC errors. This count wraps to zero after reaching its maximum value.

dataSigChanNi2FramerNonOctetErrors

This attribute counts the total number of frames that were non octet aligned. This count wraps to zero after reaching its maximum value.

dataSigChanNi2FramerOverruns

This attribute counts the total number of frames received from the link for which overruns occurred. This count wraps to zero after reaching its maximum value.

dataSigChanNi2FramerUnderruns

This attribute counts the total number of frames transmitted to the link for which underruns occurred. This count wraps to zero after reaching its maximum value.

dataSigChanNi2FramerLargeFrmErrors

This attribute counts the total number of frames received which were too large. The frame was longer than 500 bytes. This count wraps to zero after reaching its maximum value.