Nortel-Magellan-Passport-DisdnTS014MIB Download

dataSigChanTS014RowStatusTable

This entry controls the addition and deletion of dataSigChanTS014 components.

dataSigChanTS014RowStatusEntry

A single entry in the table represents a single dataSigChanTS014 component.

dataSigChanTS014RowStatus

This variable is used as the basis for SNMP naming of dataSigChanTS014 components. These components can be added and deleted.

dataSigChanTS014ComponentName

This variable provides the component's string name for use with the ASCII Console Interface

dataSigChanTS014StorageType

This variable represents the storage type value for the dataSigChanTS014 tables.

dataSigChanTS014Index

This variable represents the index for the dataSigChanTS014 tables.

dataSigChanTS014L2Table

This group represents the provisionable Layer 2 attributes of the Q931 CCITT protocol.

dataSigChanTS014L2Entry

An entry in the dataSigChanTS014L2Table.

dataSigChanTS014T23

This attribute specifies the layer2 enable request timer.

dataSigChanTS014T200

This attribute specifies the maximum time between a layer 2 frame and its acknowledgement

dataSigChanTS014N200

This attribute specifies the maximum number of re-transmissions of a layer2 frame.

dataSigChanTS014T203

This attribute specifies the maximum time that a no layer 2 traffic situation can last. Expiry triggers a check on whether the far end is a live.

dataSigChanTS014N201

This attribute specifies the maximum number of octets in an information field.

dataSigChanTS014CircuitSwitchedK

This attribute specifies the maximum number of frames for B channel use.

dataSigChanTS014ProvTable

This group defines the general options of the d-channel signalling link.

dataSigChanTS014ProvEntry

An entry in the dataSigChanTS014ProvTable.

dataSigChanTS014Side

This attribute specifies whether the layer 2 HDLC interface is the network or user side of the connection.

dataSigChanTS014OperTable

This group provides the operational attributes for the signalling protocol.

dataSigChanTS014OperEntry

An entry in the dataSigChanTS014OperTable.

dataSigChanTS014ActiveChannels

This attribute indicates the number of currently active channels. This includes data and voice channels.

dataSigChanTS014PeakActiveChannels

This attribute indicates the maximum number of channels that have been active on this signalling channel during the last polling period.

dataSigChanTS014DChanStatus

This attribute indicates the state of the D-channel. outOfService means that there is no layer 2 or layer 3 connectivity to the PBX. establishing means that the signalling channel is attempting to stage the layer 2. established means that the layer 2 is e ...

dataSigChanTS014ToolsTable

This group contains a series of operational attributes which turn on and off several kinds of tracing.

dataSigChanTS014ToolsEntry

An entry in the dataSigChanTS014ToolsTable.

dataSigChanTS014Tracing

This attribute defines which types of tracing are active for this signalling channel. The tracing messages are sent to the debug stream. To see the messages the agentQueue attribute in Col/debug must be greater than 0 and a Telnet NMIS session must list ...

dataSigChanTS014FramerRowStatusTable

This entry controls the addition and deletion of dataSigChanTS014Framer components.

dataSigChanTS014FramerRowStatusEntry

A single entry in the table represents a single dataSigChanTS014Framer component.

dataSigChanTS014FramerRowStatus

This variable is used as the basis for SNMP naming of dataSigChanTS014Framer components. These components cannot be added nor deleted.

dataSigChanTS014FramerComponentName

This variable provides the component's string name for use with the ASCII Console Interface

dataSigChanTS014FramerStorageType

This variable represents the storage type value for the dataSigChanTS014Framer tables.

dataSigChanTS014FramerIndex

This variable represents the index for the dataSigChanTS014Framer tables.

dataSigChanTS014FramerProvTable

This group contains the base provisioning data for the Framer component. Application or hardware interface specific provisioning data is contained in other provisionable Framer groups.

dataSigChanTS014FramerProvEntry

An entry in the dataSigChanTS014FramerProvTable.

dataSigChanTS014FramerInterfaceName

This attribute contains a hardware component name. The attribute associates the application with a specific link. This defines the module processor on which Framer's parent component (as well as Framer itself) will run.

dataSigChanTS014FramerStateTable

This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses ...

dataSigChanTS014FramerStateEntry

An entry in the dataSigChanTS014FramerStateTable.

dataSigChanTS014FramerAdminState

This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this ...

dataSigChanTS014FramerOperationalState

This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that t ...

dataSigChanTS014FramerUsageState

This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value b ...

dataSigChanTS014FramerStatsTable

This group contains the operational statistics data for a Framer component.

dataSigChanTS014FramerStatsEntry

An entry in the dataSigChanTS014FramerStatsTable.

dataSigChanTS014FramerFrmToIf

This attribute counts the number of frames transmitted to the link interface by Framer. This count wraps to zero after reaching its maximum value.

dataSigChanTS014FramerFrmFromIf

This attribute counts the number of frames received from the link interface by Framer. This count wraps to zero after reaching its maximum value.

dataSigChanTS014FramerOctetFromIf

The number of bytes received from the link interface by Framer.

dataSigChanTS014FramerAborts

This attribute counts the total number of aborts received. This count wraps to zero after reaching its maximum value.

dataSigChanTS014FramerCrcErrors

This attribute counts the total number of frames with CRC errors. This count wraps to zero after reaching its maximum value.

dataSigChanTS014FramerLrcErrors

This attribute counts the total number of frames with LRC errors. This count wraps to zero after reaching its maximum value.

dataSigChanTS014FramerNonOctetErrors

This attribute counts the total number of frames that were non octet aligned. This count wraps to zero after reaching its maximum value.

dataSigChanTS014FramerOverruns

This attribute counts the total number of frames received from the link for which overruns occurred. This count wraps to zero after reaching its maximum value.

dataSigChanTS014FramerUnderruns

This attribute counts the total number of frames transmitted to the link for which underruns occurred. This count wraps to zero after reaching its maximum value.

dataSigChanTS014FramerLargeFrmErrors

This attribute counts the total number of frames received which were too large. The frame was longer than 500 bytes. This count wraps to zero after reaching its maximum value.