Nortel-Magellan-Passport-HuntGroupMIB Download

hgRowStatusTable

This entry controls the addition and deletion of hg components.

hgRowStatusEntry

A single entry in the table represents a single hg component.

hgRowStatus

This variable is used as the basis for SNMP naming of hg components. These components can be added and deleted.

hgComponentName

This variable provides the component's string name for use with the ASCII Console Interface

hgStorageType

This variable represents the storage type value for the hg tables.

hgIndex

This variable represents the index for the hg tables.

hgCidDataTable

This group contains the attribute for a component's Customer Identifier (CID). Refer to the attribute description for a detailed explanation of CIDs.

hgCidDataEntry

An entry in the hgCidDataTable.

hgCustomerIdentifier

This attribute holds the Customer Identifier (CID). Every component has a CID. If a component has a cid attribute, the component's CID is the provisioned value of that attribute; otherwise the component inherits the CID of its parent. The top- level compo ...

hgNsapAddressTable

This group contains attributes common to all NSAP format addresses.

hgNsapAddressEntry

An entry in the hgNsapAddressTable.

hgAddress

The address attribute specifies the numbering plan and digits which form a unique DNA identifier of the hunt group. The format of the address attribute is . where numbering plan is x for X.121 and e for E.164. An example X.121 addre ...

hgProvTable

The Provisioned group contains the provisioned attributes of the hunt group.

hgProvEntry

An entry in the hgProvTable.

hgLogicalProcessor

This attribute specifies the logical processor on which the hunt group process will execute. The Lp/n Eng Hgs component contains statistics for all hunt groups on the LP.

hgSelectionPolicy

The selectionPolicy attribute specifies the algorithm used to select a hunt group member. A value of startFromZero means that on a new call, the first available member starting from the member with the lowest instance value is selected. Subsequent hunts f ...

hgMaxHuntAttempts

The maxHuntAttempts attribute specifies the maximum attempts allowed to hunt the call. Hunting ceases if either this maximum is exceeded or the member list is exhausted.

hgAppendSuffixDigits

The appendSuffixDigits attribute specifies how suffix called address digits are handled. Suffix called address digits are any trailing digits, signalled in a call, beyond the provisioned hunt group address. If this attribute is set to yes, suffix digits a ...

hgStateTable

This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses ...

hgStateEntry

An entry in the hgStateTable.

hgAdminState

This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this ...

hgOperationalState

This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that t ...

hgUsageState

This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value b ...

hgOperationalTable

The Operational group contains the operational attributes of the hunt group.

hgOperationalEntry

An entry in the hgOperationalTable.

hgHuntAttempts

This attribute counts the total number of hunt attempts made by the hunt group. The count includes both initial and subsequent hunt attempts. This count is contained within the huntAttempts attribute of the Lp/n Eng Hgs component. This counter wraps to 0 ...

hgFailedCalls

This attribute counts the number of calls which could not be connected by any of the hunt group members. This could occur if the hunt group is locked or has exhausted its member list. If a call cannot be connected by the hunt group it is sent to call redi ...

hgInitialHuntAttempts

This attribute counts the number of new (non-hunted) calls received by the hunt group which are forwarded to a member. This counter wraps to 0 when it exceeds its maximum value.

hgAvailabilityUpdates

This attribute counts the number of availability update packets received by the hunt group from its members. This counter wraps to 0 when it exceeds its maximum value.

hgMaxAddrLenExceeded

This attribute counts the number of times a member could not be selected to receive a call with suffix address digits because its DNA length would exceed the maximum of 14 digits with the suffix digits appended. This counter wraps to 0 when it exceeds its ...

hgBadPackets

This attribute counts the number of unrecognizable packets received by the hunt group and discarded. This counter wraps to 0 when it exceeds its maximum value.

hgHgMRowStatusTable

This entry controls the addition and deletion of hgHgM components.

hgHgMRowStatusEntry

A single entry in the table represents a single hgHgM component.

hgHgMRowStatus

This variable is used as the basis for SNMP naming of hgHgM components. These components can be added and deleted.

hgHgMComponentName

This variable provides the component's string name for use with the ASCII Console Interface

hgHgMStorageType

This variable represents the storage type value for the hgHgM tables.

hgHgMIndex

This variable represents the index for the hgHgM tables.

hgHgMProvTable

The Provisioned group contains the provisioned attributes of the hunt group member.

hgHgMProvEntry

An entry in the hgHgMProvTable.

hgHgMAddress

The address attribute specifies the numbering plan and digits which form a unique DNA identifier of the hunt group member. The format of the address attribute is . where numbering plan is x for X.121 and e for E.164. An example X.12 ...

hgHgMStateTable

This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses ...

hgHgMStateEntry

An entry in the hgHgMStateTable.

hgHgMAdminState

This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this ...

hgHgMOperationalState

This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that t ...

hgHgMUsageState

This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value b ...

hgHgMOperationalTable

The Operational group defines operational attributes associated with the HuntGroupMember component.

hgHgMOperationalEntry

An entry in the hgHgMOperationalTable.

hgHgMAvailability

This attribute indicates the current availability of the member. The higher the value, the more available the member is perceived to be. A value of 0 indicates the member is unavailable. A member must be considered 'available' by the hunt group in order t ...

hgHgMAvailabilityUpdates

This attribute counts the number of availability update packets received by the hunt group member. This counter wraps to 0 when it exceeds its maximum value.

hgHgMCallsRefused

This attribute counts the number of call packets which were returned to the hunt group by the member because it could not connect the call. If this counter increments frequently, it could indicate a problem with the member's reporting of its availability ...