Nortel-Magellan-Passport-TrunksMIB Download

trkRowStatusTable

This entry controls the addition and deletion of trk components.

trkRowStatusEntry

A single entry in the table represents a single trk component.

trkRowStatus

This variable is used as the basis for SNMP naming of trk components. These components can be added and deleted.

trkComponentName

This variable provides the component's string name for use with the ASCII Console Interface

trkStorageType

This variable represents the storage type value for the trk tables.

trkIndex

This variable represents the index for the trk tables.

trkIfEntryTable

This group contains the provisionable attributes for the ifEntry.

trkIfEntryEntry

An entry in the trkIfEntryTable.

trkIfAdminStatus

The desired state of the interface. The up state indicates the interface is operational. The down state indicates the interface is not operational. The testing state indicates that no operational packets can be passed.

trkIfIndex

This is the index for the IfEntry. Its value is automatically initialized during the provisioning process.

trkProvTable

This group of attributes provides the parameters used by the layer 3 Trunk to Trunk staging protocol.

trkProvEntry

An entry in the trkProvTable.

trkExpectedRemoteNodeName

This attribute specifies the expected node name of the module to which this Trunk is connected. Once entered, the node name must correspond to the Mod nodeName attribute of the remote node. The Trunk end points exchange their node name through the Trunk s ...

trkRemoteValidationAction

This attribute specifies the action to be taken if there is a mismatch between the expectedRemoteNodeName attribute and the value received from the remote end. The remoteValidationAction determines the action when a value is supplied to the expectedRemote ...

trkMaximumExpectedRoundTripDelay

This is the maximum round trip delay value used by the Trunk staging protocol, in conjunction with measuredSpeedToIf, to determine if it has taken too long to successfully stage with a remote Trunk. The value specified must be larger than the measuredRoun ...

trkIdleTimeOut

This attribute specifies the Trunk protocol idle time out duration in units of seconds. If the local Trunk does not receive any packets from the link for the period specified by this attribute, the Trunk enters Are You There (AYT) mode for up to two secon ...

trkOverridesTable

Theses attribute comprise the set of provisionable override parameters supported by both the Trunk and DpnGateway components. The attributes are used when reporting operational attributes (used for metric calculations) to the routing system.

trkOverridesEntry

An entry in the trkOverridesTable.

trkOverrideTransmitSpeed

This is the overridden value of link speed (bit/s) that, if staged successfully with the remote, is reported to the routing system for metric calculations. A zero indicates that an override value has not been provided and that only the measured value will ...

trkOldOverrideRoundTripDelay

This is the overridden value of link delay (ms) that, if staged successfully with the remote, is reported to the routing system for metric calculations. A zero indicates that an override value has not been provided and that only the measured value will be ...

trkOverrideRoundTripUsec

This is the overridden value of link delay (ms) that, if staged successfully with the remote, is reported to the routing system for metric calculations. A zero indicates that an override value has not been provided and that only the measured value will be ...

trkStateTable

This group contains the three OSI State attributes and the six OSI Status attributes. The descriptions generically indicate what each attribute implies about the component. Note that not all the values and state combinations described here are supported b ...

trkStateEntry

An entry in the trkStateTable.

trkAdminState

This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this ...

trkOperationalState

This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that t ...

trkUsageState

This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value b ...

trkAvailabilityStatus

If supported by the component, this attribute indicates the OSI Availability status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that ei ...

trkProceduralStatus

If supported by the component, this attribute indicates the OSI Procedural status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that eith ...

trkControlStatus

If supported by the component, this attribute indicates the OSI Control status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either ...

trkAlarmStatus

If supported by the component, this attribute indicates the OSI Alarm status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either th ...

trkStandbyStatus

If supported by the component, this attribute indicates the OSI Standby status of the component. The value notSet indicates that either the attribute is not supported or that none of the status conditions described below are present. Note that this is a n ...

trkUnknownStatus

This attribute indicates the OSI Unknown status of the component. The value false indicates that all of the other OSI State and Status attribute values can be considered accurate. The value true indicates that the actual state of the component is not know ...

trkOperStatusTable

This group includes the Operational Status attribute. This attribute defines the current operational state of this component.

trkOperStatusEntry

An entry in the trkOperStatusTable.

trkSnmpOperStatus

The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interface is not operational, thus unable to forward packets. testing state indicates that no operation ...

trkOperTable

This is the group of operational attributes supported by the Trunk.

trkOperEntry

An entry in the trkOperTable.

trkRemoteComponentName

This attribute is the component name of the remote end which it has supplied through the Trunk staging protocol.

trkTransportTable

This group of attributes contains the set of operational parameters measured and maintained by both the Trunk and DpnGateway components.

trkTransportEntry

An entry in the trkTransportTable.

trkMeasuredSpeedToIf

This attribute indicates the current 'transmittable' bandwidth of the underlying facility. For a Trunk with a Unack subcomponent, and a DpnGateway with a Utp subcomponent, if a serial port is used, the value is the measured transmit speed of the port; if ...

trkMeasuredRoundTripDelay

This attribute indicates the measured Round Trip Delay (msec) discovered with the remote through the Trunk and DpnGateway staging protocols. The value includes emission, propagation, and queuing delays. A 512 byte data packet is used to perform the measur ...

trkMaxTxUnit

This is the maximum transmission unit (byte size) that is supported by the Trunk or DpnGateway component. This size includes the data and routing headers. A value of zero indicates the MTU has not yet been determined.

trkMeasuredRoundTripDelayUsec

This attribute indicates the measured Round Trip Delay (msec) discovered with the remote through the Trunk and DpnGateway staging protocols. The value includes emission, propagation, and queuing delays. A 512 byte data packet is used to perform the measur ...

trkStatsTable

These attributes comprise the statistics collected by the Trunk component.

trkStatsEntry

An entry in the trkStatsTable.

trkAreYouThereModeEntries

This attribute counts the number of times that the component has entered Are You There mode. This counter wraps around to zero when the maximum value is exceeded.

trkPktFromIf

This attribute counts the number of packets received from the remote module. It does not include the packets received from the interrupting queue. This counter wraps around to zero when the maximum value is exceeded.

trkTrunkPktFromIf

This attribute counts the number of internal trunk protocol packets (including those from the interrupting queue) received from the remote module. These packets are forwarded to the Trunk component. This counter wraps around to zero when the maximum value ...

trkTrunkPktToIf

This attribute counts the number of internal trunk protocol packets (including those through the interrupting queue) transmitted to the remote module. This counter wraps around to zero when the maximum value is exceeded.

trkDiscardUnforward

This attribute counts the number of packets received from the remote module that have been discarded. It does not include the packets received from the interrupting queue that have been discarded. This counter wraps around to zero when the maximum value i ...

trkDiscardTrunkPktFromIf

This attribute counts the number of internal trunk protocol packets (including those on the interrupting queue) received from the remote module that have been discarded. This counter wraps around to zero when the maximum value is exceeded. The three main ...

trkIntPktFromIf

This attribute counts the number of packets received on the interrupting queue from the remote module. This counter wraps around to zero when the maximum value is exceeded.

trkDiscardIntUnforward

This attribute counts the number of packets received on the interrupting queue from the remote module that have been discarded. This counter wraps around to zero when the maximum value is exceeded. Two main reasons that cause this counter to increment are ...

trkStagingAttempts

This attribute counts the number of times that the staging protocol has attempted to stage with the remote module. This counter wraps around to zero when the maximum value is exceeded. The main reason that causes this counter to increment is that the loca ...

trkDiscardTrunkPktToIf

This attribute counts the number of internal trunk protocol packets (including those through the interrupting queue) that have been discarded before being transmitted to the remote module. This counter wraps around to zero when the maximum value is exceed ...

trkUtilization

This attribute indicates the average trunk utilization. For a Trunk/n with an Unack subcomponent, the value is the link receive utilization. It is calculated every minute by comparing the number of octets received from the remote module against the value ...

trkSpeedReportingTable

This group of provisionable attributes provides the ability to disable or enable the generation of speed change alarms by the Trunk component. It also provides the ability to disable or enable the Dynamic Speed Reporting mechanism.

trkSpeedReportingEntry

An entry in the trkSpeedReportingTable.

trkSpeedReportingHoldOff

This attribute specifies the hold off time for reporting speed increases. When the measuredSpeedToIf reaches a level specified by the speedReportingThresholds attribute, the value specifies the duration (in units of seconds) for which the measuredSpeedToI ...

trkLowSpeedAlarmThreshold

This attribute specifies the lower end of the range of normal speeds for this Trunk. If the measuredSpeedToIf drops below this value the Trunk component generates a SET alarm. When the measuredSpeedToIf reaches or exceeds the value of this attribute, the ...

trkHighSpeedAlarmThreshold

This attribute specifies the upper end of the range of normal speeds for this Trunk. If the measuredSpeedToIf exceeds this value the Trunk component generates a SET alarm. When the measuredSpeedToIf returns to or falls below the value of this attribute, t ...

trkSpdThTable

This attribute controls the behavior of the Dynamic Speed Reporting mechanism. If its value is empty then the mechanism is disabled and neither increases nor decreases are reported. Otherwise, the attribute may contain up to seven threshold levels which a ...

trkSpdThEntry

An entry in the trkSpdThTable.

trkSpdThValue

This variable represents both the value and the index for the trkSpdThTable.

trkSpdThRowStatus

This variable is used to control the addition and deletion of individual values of the trkSpdThTable.

trkPktBpTable

This attribute counts the number of packets received by the Trunk. It is a vector indexed by the emission priorities (ep0, ep1, and ep2) of the packets. The highest emission priority is ep0. These counters wrap around to zero when the maximum value is exc ...

trkPktBpEntry

An entry in the trkPktBpTable.

trkPktBpIndex

This variable represents the trkPktBpTable specific index for the trkPktBpTable.

trkPktBpValue

This variable represents an individual value for the trkPktBpTable.

trkDiscBpTable

This attribute counts the number of packets received from the remote module that have been discarded. It is a vector indexed by the emission priorities (ep0, ep1 and ep2) of the packets. The highest emission priority is ep0. These counters wrap around to ...

trkDiscBpEntry

An entry in the trkDiscBpTable.

trkDiscBpIndex

This variable represents the trkDiscBpTable specific index for the trkDiscBpTable.

trkDiscBpValue

This variable represents an individual value for the trkDiscBpTable.

trkOctBpTable

This attribute counts the octets coming from the remote module which are received by the Trunk. It is a vector indexed by the emission priorities (ep0, ep1 and ep2) of the packets. The highest emission priority is ep0. These counters wrap around to zero w ...

trkOctBpEntry

An entry in the trkOctBpTable.

trkOctBpIndex

This variable represents the trkOctBpTable specific index for the trkOctBpTable.

trkOctBpValue

This variable represents an individual value for the trkOctBpTable.

trkPorsStatsRowStatusTable

This entry controls the addition and deletion of trkPorsStats components.

trkPorsStatsRowStatusEntry

A single entry in the table represents a single trkPorsStats component.

trkPorsStatsRowStatus

This variable is used as the basis for SNMP naming of trkPorsStats components. These components cannot be added nor deleted.

trkPorsStatsComponentName

This variable provides the component's string name for use with the ASCII Console Interface

trkPorsStatsStorageType

This variable represents the storage type value for the trkPorsStats tables.

trkPorsStatsIndex

This variable represents the index for the trkPorsStats tables.

trkPorsStatsOperTable

This operational group provides the PORS Trunks interrupting and normal traffic statistics for operator console display.

trkPorsStatsOperEntry

An entry in the trkPorsStatsOperTable.

trkPorsStatsPorsNormPktFromIf

This attribute counts the number of normal priority packets received on the PORS Trunk normal priority queue. This counter wraps around to zero when the maximum value is exceeded.

trkPorsStatsPorsNormDiscUnforwardFromIf

This attribute counts the number of normal priority packets discarded from the PORS Trunk normal priority queue. This counter wraps around to zero when the maximum value is exceeded.

trkPorsStatsPorsNormOctetFromIf

This attribute counts the number of normal priority bytes received on the PORS Trunk normal priority queue.This counter wraps around to zero when the maximum value is exceeded.

trkPorsStatsPorsIntPktFromIf

This attribute counts the number of interrupting priority packets received on the PORS Trunk interrupting priority queue. This counter wraps around to zero when the maximum value is exceeded.

trkPorsStatsPorsIntDiscUnforwardFromIf

This attribute counts the number of interrupting priority packets discarded from the PORS Trunk interrupting priority queue. This counter wraps around to zero when the maximum value is exceeded.

trkPorsStatsPorsIntOctetFromIf

This attribute counts the number of interrupting priority bytes received on the PORS Trunk interrupting priority queue. This counter wraps around to zero when the maximum value is exceeded.

trkPorsStatsPktBpTable

This attribute counts the number of PORS packets received by the Trunk. It is an array indexed by the emission priorities (ep0, ep1 and ep2) and discard priorities (dp0, dp1, dp2 and dp3) of the packets. The highest emission priority is ep0 and the least ...

trkPorsStatsPktBpEntry

An entry in the trkPorsStatsPktBpTable.

trkPorsStatsPktBpEpIndex

This variable represents the next to last index for the trkPorsStatsPktBpTable.

trkPorsStatsPktBpDpIndex

This variable represents the final index for the trkPorsStatsPktBpTable.

trkPorsStatsPktBpValue

This variable represents an individual value for the trkPorsStatsPktBpTable.

trkPorsStatsDiscBpTable

This attribute counts the number of PORS packets received from the remote module that have been discarded. It is an array indexed by the emission priorities (ep0, ep1 and ep2) and discard priorities (dp0, dp1, dp2 and dp3) of the packets. The highest emis ...

trkPorsStatsDiscBpEntry

An entry in the trkPorsStatsDiscBpTable.

trkPorsStatsDiscBpEpIndex

This variable represents the next to last index for the trkPorsStatsDiscBpTable.

trkPorsStatsDiscBpDpIndex

This variable represents the final index for the trkPorsStatsDiscBpTable.

trkPorsStatsDiscBpValue

This variable represents an individual value for the trkPorsStatsDiscBpTable.

trkPorsStatsOctBpTable

This attribute counts the number of PORS octets received by the Trunk. It is an array indexed by the emission priorities (ep0, ep1 and ep2) and discard priorities (dp0, dp1, dp2 and dp3) of the packets. The highest emission priority is ep0 and the least d ...

trkPorsStatsOctBpEntry

An entry in the trkPorsStatsOctBpTable.

trkPorsStatsOctBpEpIndex

This variable represents the next to last index for the trkPorsStatsOctBpTable.

trkPorsStatsOctBpDpIndex

This variable represents the final index for the trkPorsStatsOctBpTable.

trkPorsStatsOctBpValue

This variable represents an individual value for the trkPorsStatsOctBpTable.

trkFwdStatsRowStatusTable

This entry controls the addition and deletion of trkFwdStats components.

trkFwdStatsRowStatusEntry

A single entry in the table represents a single trkFwdStats component.

trkFwdStatsRowStatus

This variable is used as the basis for SNMP naming of trkFwdStats components. These components cannot be added nor deleted.

trkFwdStatsComponentName

This variable provides the component's string name for use with the ASCII Console Interface

trkFwdStatsStorageType

This variable represents the storage type value for the trkFwdStats tables.

trkFwdStatsIndex

This variable represents the index for the trkFwdStats tables.

trkFwdStatsOperTable

This operational group counts the Trunk or DpnGateway packet forwarding traffic statistics for operator console display.

trkFwdStatsOperEntry

An entry in the trkFwdStatsOperTable.

trkFwdStatsFwdPktFromIf

This attribute counts the number of forwarding packets received by the Trunk or DpnGateway. This counter wraps around to zero when the maximum value is exceeded.

trkFwdStatsFwdDiscUnforwardFromIf

This attribute counts the number of forwarding packets discarded by the Trunk or DpnGateway. This counter wraps around to zero when the maximum value is exceeded.

trkFwdStatsFwdOctetFromIf

This attribute counts the number of forwarding bytes received by the Trunk or DpnGateway. This counter wraps around to zero when the maximum value is exceeded.

trkVnsStatsRowStatusTable

This entry controls the addition and deletion of trkVnsStats components.

trkVnsStatsRowStatusEntry

A single entry in the table represents a single trkVnsStats component.

trkVnsStatsRowStatus

This variable is used as the basis for SNMP naming of trkVnsStats components. These components cannot be added nor deleted.

trkVnsStatsComponentName

This variable provides the component's string name for use with the ASCII Console Interface

trkVnsStatsStorageType

This variable represents the storage type value for the trkVnsStats tables.

trkVnsStatsIndex

This variable represents the index for the trkVnsStats tables.

trkVnsStatsOperTable

This operational group counts the Trunk virtual network traffic statistics for operator console display.

trkVnsStatsOperEntry

An entry in the trkVnsStatsOperTable.

trkVnsStatsVnsPktFromIf

This attribute counts the number of virtual network packets received by a Trunk component handling virtual network traffic. This counter wraps around to zero when the maximum value is exceeded.

trkVnsStatsVnsDiscUnforwardFromIf

This attribute counts the number of virtual network packets discarded by a Trunk component handling virtual network traffic. This counter wraps around to zero when the maximum value is exceeded.

trkVnsStatsVnsOctetFromIf

This attribute counts the number of virtual network bytes received by a Trunk component handling virtual network traffic. This counter wraps around to zero when the maximum value is exceeded.

trkVnsStatsPktBpTable

This attribute counts the number of Virtual Network packets received by the Trunk. It is an array indexed by the emission priorities (ep0, ep1 and ep2) and discard priorities (dp0, dp1, dp2 and dp3) of the packets. The highest emission priority is ep0 and ...

trkVnsStatsPktBpEntry

An entry in the trkVnsStatsPktBpTable.

trkVnsStatsPktBpEpIndex

This variable represents the next to last index for the trkVnsStatsPktBpTable.

trkVnsStatsPktBpDpIndex

This variable represents the final index for the trkVnsStatsPktBpTable.

trkVnsStatsPktBpValue

This variable represents an individual value for the trkVnsStatsPktBpTable.

trkVnsStatsDiscBpTable

This attribute counts the number of Virtual Network packets received from the remote module that have been discarded by the Trunk. It is an array indexed by the emission priorities (ep0, ep1 and ep2) and discard priorities (dp0, dp1, dp2 and dp3) of the p ...

trkVnsStatsDiscBpEntry

An entry in the trkVnsStatsDiscBpTable.

trkVnsStatsDiscBpEpIndex

This variable represents the next to last index for the trkVnsStatsDiscBpTable.

trkVnsStatsDiscBpDpIndex

This variable represents the final index for the trkVnsStatsDiscBpTable.

trkVnsStatsDiscBpValue

This variable represents an individual value for the trkVnsStatsDiscBpTable.

trkVnsStatsOctBpTable

This attribute counts the number of Virtual Network octets received by the Trunk. It is an array indexed by the emission priorities (ep0, ep1 and ep2) and discard priorities (dp0, dp1, dp2 and dp3) of the packets. The highest emission priority is ep0 and ...

trkVnsStatsOctBpEntry

An entry in the trkVnsStatsOctBpTable.

trkVnsStatsOctBpEpIndex

This variable represents the next to last index for the trkVnsStatsOctBpTable.

trkVnsStatsOctBpDpIndex

This variable represents the final index for the trkVnsStatsOctBpTable.

trkVnsStatsOctBpValue

This variable represents an individual value for the trkVnsStatsOctBpTable.

trkDprsStatsRowStatusTable

This entry controls the addition and deletion of trkDprsStats components.

trkDprsStatsRowStatusEntry

A single entry in the table represents a single trkDprsStats component.

trkDprsStatsRowStatus

This variable is used as the basis for SNMP naming of trkDprsStats components. These components cannot be added nor deleted.

trkDprsStatsComponentName

This variable provides the component's string name for use with the ASCII Console Interface

trkDprsStatsStorageType

This variable represents the storage type value for the trkDprsStats tables.

trkDprsStatsIndex

This variable represents the index for the trkDprsStats tables.

trkDprsStatsPktBpTable

This attribute counts the number of DPRS packets received by the Trunk. It is an array indexed by the emission priorities (ep0, ep1 and ep2) and discard priorities (dp0, dp1, dp2 and dp3) of the packets. The highest emission priority is ep0 and the least ...

trkDprsStatsPktBpEntry

An entry in the trkDprsStatsPktBpTable.

trkDprsStatsPktBpEpIndex

This variable represents the next to last index for the trkDprsStatsPktBpTable.

trkDprsStatsPktBpDpIndex

This variable represents the final index for the trkDprsStatsPktBpTable.

trkDprsStatsPktBpValue

This variable represents an individual value for the trkDprsStatsPktBpTable.

trkDprsStatsDiscBpTable

This attribute counts the number of DPRS packets received from the remote module that have been discarded by the Trunk. It is an array indexed by the emission priorities (ep0, ep1 and ep2) and discard priorities (dp0, dp1, dp2 and dp3) of the packets. The ...

trkDprsStatsDiscBpEntry

An entry in the trkDprsStatsDiscBpTable.

trkDprsStatsDiscBpEpIndex

This variable represents the next to last index for the trkDprsStatsDiscBpTable.

trkDprsStatsDiscBpDpIndex

This variable represents the final index for the trkDprsStatsDiscBpTable.

trkDprsStatsDiscBpValue

This variable represents an individual value for the trkDprsStatsDiscBpTable.

trkDprsStatsOctBpTable

This attribute counts the number of DPRS octets received by the Trunk. It is an array indexed by the emission priorities (ep0, ep1 and ep2) and discard priorities (dp0, dp1, dp2 and dp3) of the packets. The highest emission priority is ep0 and the least d ...

trkDprsStatsOctBpEntry

An entry in the trkDprsStatsOctBpTable.

trkDprsStatsOctBpEpIndex

This variable represents the next to last index for the trkDprsStatsOctBpTable.

trkDprsStatsOctBpDpIndex

This variable represents the final index for the trkDprsStatsOctBpTable.

trkDprsStatsOctBpValue

This variable represents an individual value for the trkDprsStatsOctBpTable.