Nortel-Magellan-Passport-UnackTrunksMIB Download

trkUnAckedRowStatusTable

This entry controls the addition and deletion of trkUnAcked components.

trkUnAckedRowStatusEntry

A single entry in the table represents a single trkUnAcked component.

trkUnAckedRowStatus

This variable is used as the basis for SNMP naming of trkUnAcked components. These components can be added and deleted.

trkUnAckedComponentName

This variable provides the component's string name for use with the ASCII Console Interface

trkUnAckedStorageType

This variable represents the storage type value for the trkUnAcked tables.

trkUnAckedIndex

This variable represents the index for the trkUnAcked tables.

trkUnAckedProvTable

This group of provisionable attributes contains the parameters used by Unacknowledged, Utp, and FrAccess for monitoring link quality.

trkUnAckedProvEntry

An entry in the trkUnAckedProvTable.

trkUnAckedMaximumErroredInterval

This attribute specifies the interval time over which the error threshold (as specified by receiveErrorSensitivity) must be continuously exceeded before the Unacknowledged, Utp, or FrAccess component can be degraded. Once the error interval count exceeds ...

trkUnAckedReceiveErrorSensitivity

This attribute is the allowable error rate beyond which the Unacknowledged, Utp, or FrAccess component can be degraded if it persists for a duration longer than the maximumErrorInterval. The threshold is expressed as a percentage of number of errored fram ...

trkUnAckedStateTable

This group contains the three OSI State attributes and the six OSI Status attributes. The descriptions generically indicate what each attribute implies about the component. Note that not all the values and state combinations described here are supported b ...

trkUnAckedStateEntry

An entry in the trkUnAckedStateTable.

trkUnAckedAdminState

This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this ...

trkUnAckedOperationalState

This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that t ...

trkUnAckedUsageState

This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value b ...

trkUnAckedAvailabilityStatus

If supported by the component, this attribute indicates the OSI Availability status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that ei ...

trkUnAckedProceduralStatus

If supported by the component, this attribute indicates the OSI Procedural status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that eith ...

trkUnAckedControlStatus

If supported by the component, this attribute indicates the OSI Control status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either ...

trkUnAckedAlarmStatus

If supported by the component, this attribute indicates the OSI Alarm status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either th ...

trkUnAckedStandbyStatus

If supported by the component, this attribute indicates the OSI Standby status of the component. The value notSet indicates that either the attribute is not supported or that none of the status conditions described below are present. Note that this is a n ...

trkUnAckedUnknownStatus

This attribute indicates the OSI Unknown status of the component. The value false indicates that all of the other OSI State and Status attribute values can be considered accurate. The value true indicates that the actual state of the component is not know ...

trkUnAckedFramerRowStatusTable

This entry controls the addition and deletion of trkUnAckedFramer components.

trkUnAckedFramerRowStatusEntry

A single entry in the table represents a single trkUnAckedFramer component.

trkUnAckedFramerRowStatus

This variable is used as the basis for SNMP naming of trkUnAckedFramer components. These components cannot be added nor deleted.

trkUnAckedFramerComponentName

This variable provides the component's string name for use with the ASCII Console Interface

trkUnAckedFramerStorageType

This variable represents the storage type value for the trkUnAckedFramer tables.

trkUnAckedFramerIndex

This variable represents the index for the trkUnAckedFramer tables.

trkUnAckedFramerProvTable

This group contains the base provisioning data for the Framer component. Application or hardware interface specific provisioning data is contained in other provisionable Framer groups.

trkUnAckedFramerProvEntry

An entry in the trkUnAckedFramerProvTable.

trkUnAckedFramerInterfaceName

This attribute contains a hardware component name. The attribute associates the application with a specific link. This defines the module processor on which Framer's parent component (as well as Framer itself) will run.

trkUnAckedFramerLinkTable

This group contains attributes defining the framing of data on the link interface.

trkUnAckedFramerLinkEntry

An entry in the trkUnAckedFramerLinkTable.

trkUnAckedFramerFramingType

This attribute specifies the type of framing protocol that will be used for frames transmitted to the link interface and received from the link interface. If the value of this attribute is set to the default interrupting, then a Proprietary hdlc protocol ...

trkUnAckedFramerDataInversion

This attribute determines whether data bits are to be inverted (1 to 0 and 0 to 1) before transmission of frames to the interface. If the value of this attribute is On, the incoming data bits will also be inverted when frames are received from the link be ...

trkUnAckedFramerFrameCrcType

This attribute defines the type of CRC used. The CRC value calculated is appended to the end of the frames transmitted to the link. The CRC value is removed from the end of frames received from the link and checked for correctness. NoCrc means that CRC is ...

trkUnAckedFramerFlagsBetweenFrames

This attribute defines the number of flags that are inserted between frames sent to the link interface.

trkUnAckedFramerStateTable

This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses ...

trkUnAckedFramerStateEntry

An entry in the trkUnAckedFramerStateTable.

trkUnAckedFramerAdminState

This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this ...

trkUnAckedFramerOperationalState

This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that t ...

trkUnAckedFramerUsageState

This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value b ...

trkUnAckedFramerStatsTable

This group contains the operational statistics data for a Unacknowledge Framer component.

trkUnAckedFramerStatsEntry

An entry in the trkUnAckedFramerStatsTable.

trkUnAckedFramerFrmFromIf

The number of frames received from the link interface by Framer.

trkUnAckedFramerOctetFromIf

The number of bytes received from the link interface by Framer.

trkUnAckedFramerAborts

This attribute is the total number of aborts received.

trkUnAckedFramerCrcErrors

This attribute is the total number of frames with with CRC errors.

trkUnAckedFramerLrcErrors

This attribute is the total number of frames with LRC errors.

trkUnAckedFramerNonOctetErrors

This attribute is the total number of frames that were non octet aligned.

trkUnAckedFramerOverruns

This attribute is the total number of frames received from the link for which overruns occurred.

trkUnAckedFramerUnderruns

This attribute is the total number of frames transmitted to the link for which underruns occurred.

trkUnAckedFramerLargeFrmErrors

This attribute is the total number of frames received which were too large. The frame execeeded the maximumFrameLengthLimit provisioned attribute or it contained more than the 255 block hardware limit.

trkUnAckedFramerFrmModeErrors

This attribute is the total number of frames detected with framing mode errors. A framingModeError is flagged when frames are inconsistent with the specified framingType, that is when interrupting frames are used while running in hdlc mode.

trkUnAckedFramerOutOfSequenceFrm

This attribute is the total number of out of sequence frames in interrupting mode that have been received from the link.

trkUnAckedFramerRepeatedFrm

This attribute is the total number of repeated frames (frames with the same sequence number) in interrupting mode that have been received from the link.

trkUnAckedFramerUtilTable

This group contains the link utilization operational data for a Framer component.

trkUnAckedFramerUtilEntry

An entry in the trkUnAckedFramerUtilTable.

trkUnAckedFramerNormPrioLinkUtilToIf

This attribute is the utilization of the normal and high priority data traffic (interruptable traffic) sent to the link as a percentage of the available bandwidth on the link. Note that this includes traffic with Transfer Priorities (TP) of 0, 6 and 9 and ...

trkUnAckedFramerHighPrioLinkUtilToIf

This attribute is the utilization of the interrupting priority data traffic sent to the link as a percentage of the available bandwidth on the link. Note that this includes traffic with a Transfer Priority (TP) of 11 and/or Emission Priority of 1. The uti ...

trkUnAckedFramerNormPrioLinkUtilFromIf

This attribute is the utilization of the normal and high priority data traffic (interruptable traffic) received from the link as a percentage of the available bandwidth on the link. Note that this includes traffic with Transfer Priorities (TP) of 0, 6 and ...

trkUnAckedFramerHighPrioLinkUtilFromIf

This attribute is the utilization of the interrupting priority data (interrupting traffic) received from the link as a percentage of the available bandwidth on the link. Note that this includes traffic with a Transfer Priority (TP) of 11 and/or Emission P ...

trkUnAckedFramerUtilThresholdTable

This group contains all of the provisioning data required to set the link utilization alarm thresholds. All thresholds are percentages which can take on any value in the range of 0% through 100%. The value 100% is used to disable an individual threshold. ...

trkUnAckedFramerUtilThresholdEntry

An entry in the trkUnAckedFramerUtilThresholdTable.

trkUnAckedFramerMinorLinkUtilAlarmThreshold

This attribute provides the threshold value which defines when a minor alarm would be issued, denoting a sustained total average link utilization. The total average link utilization is calculated based on the number of received bytes. The Set alarm is iss ...

trkUnAckedFramerMajorLinkUtilAlarmThreshold

This attribute provides the threshold value which defines when a major alarm would be issued, denoting a sustained total average link utilization. The total average link utilization is calculated based on the number of received bytes. The Set alarm is iss ...

trkUnAckedFramerCriticalLinkUtilAlarmThreshold

This attribute provides the threshold value which defines when a critical alarm would be issued, denoting a sustained total average link utilization. The total average link utilization is calculated based on the number of received bytes. The Set alarm is ...

trkUnAckedFramerLinkUtilAlarmStatus

This attribute provides control of the generation of link utilization alarms. If the value is disabled, none of the alarms are generated (this is equivalent to setting all of the thresholds to 100%). If the value is enabled, the individual thresholds are ...