RAID-Adapter-MIB

RAID-Adapter-MIB Download

MIBs list

IPHost Network Monitor offer an easy way of SNMP monitoring your Dell Servers, Routers, Switches, Bridges, Firewalls, Repeaters.

OID list for RAID-Adapter-MIB

adapterTable
A List of Adapter Entries containing Information/Properties about the Adapters in the System.
adapterEntry
An entry in the Adapter Table. Each Entry corresponds to one Adapter in the System.
adpAdapterNumber
The Adapter Number for this Instance of Adapter Object. This Entry in the Table, contains Information about the Adapter Number specified by this variable.
numLogicalDrives
Number of Logical Drives Configured on this Adapter.
firmwareVersion
The Firmware Version of the Firmware running on this Adapter.
biosVersion
The Bios Version of the BIOS Present in the Flash ROM on this Adapter.
dramSizeInMB
Amount of DRAM in Mega Bytes present on this Adapter.
chipSetType
Motherboard Chipset Type for which the Adapter ASIC is Configured.
rebuildRateInPercent
Rebuild Rate for this Adapter. This determines the Priority of Rebuild/Check-Consistency/Reconstruct Operations versus the Read-Write Operations.
flushInterval
Internal Cache Flush Interval for Logical Drives in WriteBack Mode.
maxConcurrentCmds
Maximum Concurrent Commands Supported by the Adapter.
spinupDelay
This is the Spinup Delay for Spinning Up Physical Drives at Firmware Initialization Time. The Physical Drives are divided into Groups, each containing the number of drives indicated by the spinupCount variable. spinupDelay variable is the amount of delay ...
spinupCount
This is the Spinup Count for Spinning up Physical Drives at Firmware Initialization Time. The Physical Drives are divided into Groups, each containing the number of drives indicated by this variable. All the drives in a group are issued SPINUP Command wit ...
adpIOReadsPerSec
Number of IO Reads/sec statistics for this adapter.
adpIOWritesPerSec
Number of IO Writes/sec statistics for this adapter.
adpReadKBsPerSec
Amount of Data Transferred in KBs/sec due to READ Transfers.
adpWriteKBsPerSec
Amount of Data Transferred in KBs/sec due to WRITE Transfers.
adpReadFailuresPerSec
Number of Read-Failures/sec statistics for this adapter.
adpWriteFailuresPerSec
Number of Write-Failures/sec statistics for this adapter.
scanChannels
Use this Variable to Discover the Non-Disk Devices attached to the Adapter. Set this Variable to startscan (an integer value of 2) to start the Channel Scanning.
logicaldriveTable
A List of Logical Drive Entries containing Information/Properties about the Logical Drives Configured in the System.
logicaldriveEntry
An Entry in the Logical Drive Table.
ldAdapterNumber
The Adapter Number for this Instance of Adapter/LogicalDrive object.
logicalDriveNumber
Logical Drive Number for this Logical Drive Entry.
status
The Status of this Logical Drive.
sizeInMB
The Configured Size of this Logical Drive.
raidLevel
Configured Raid Level for this Logical Drive.
stripeSize
Configured Stripe Size for this Logical Drive.
readPolicy
Configured Read Policy for this Logical Drive.
writePolicy
Configured Write Policy for this Logical Drive.
cachePolicy
Configured Cache Policy for this Logical Drive.
enquiryString
SCSI Inquiry String for this Logical Drive.
numberOfSpans
Number of Arrays across which this Logical Drive is Spanning.
numberOfStripes
Configured Number of Stripes for this Logical Drive.
checkConsistencyOrInitializeProgress
Check Consistency or Initialize Progress for this Logical Drive if the Logical Drive Status is checkconsistencyinprogress or initializeinprogress.
ldIOReadsPerSec
Number of IO Reads/sec Statistics for this Logical Drive.
ldIOWritesPerSec
Number of IO Writes/sec Statistics for this Logical Drive.
ldReadKBsPerSec
Amount of Data Transferred in KBs/sec due to READ Transfers.
ldWriteKBsPerSec
Amount of Data Transferred in KBs/sec due to WRITE Transfers.
ldReadFailuresPerSec
Number of Read-Failures/sec Statistics for this Logical Drive.
ldWriteFailuresPerSec
Number of Write-Failures/sec Statistics for this Logical Drive.
physicaldriveTable
A List of Physical Device Entries containing Information about the Physical Devices in the System.
physicaldriveEntry
An Entry in the Physical Drive Table.
physAdapterNumber
The Adapter Number for this Instance of Adapter/Physical-Drive Instance.
physChannel
Channel Number at Which this Physical Drive is Present.
targetID
SCSI Target ID at Which This Physical Drive is Present.
state
Current State of this Physical Drive.
arrayPosition
Array is a group of Physical Drives used to Configure Logical Drives. This String Variable has values of the type Ai-j. Example: A1-2 implies that this drive is 2nd member of Array-1.
sizeMB
Actual Size of this Physical Drive.
deviceType
Device Type of this Physical Drive.
inquiryString
SCSI Inquiry String for this Device.
scsiLevel
ANSI SCSI Level Conformance of this Device.
syncNegotiation
This indicates whether Firmware is Enabled or Disabled to perform the Synchronous Negotiation for this Device.
qtags
This indicates the Maximum Number of Concurrent Commands Firmware Issues to this Drive.
rebuildProgress
Rebuild Progress for this Physical Drive if the Physical Drive State is Rebuild.
mediumErrors
Medium Errors Occurred on this Drive Since it was Configured.
otherErrors
Other Errors Occurred on this Drive Since it was Configured.
channelTable
A List of Channel Entries containing Information/Properties about the Channels on the Adapter.
channelEntry
An Entry in the channel table.
chanAdapterNumber
The Adapter Number for this Instance of Adapter/Channel Instance.
channel
Channel Number for this Channel.
terminations
Current Terminations Effective on this Channel
channelStatus
Current Activity Status (QUIET/ACTIVE) for this Channel.
ioReadsPerSec
The Total IO-Reads/Sec Statistics on all Adapters.
ioWritesPerSec
The Total IO-Writes/Sec Statistics on all Adapters.
readKBsPerSec
The Total Read KBs Per Second Statistics on all Adapters.
writeKBsPerSec
The Total Write KBs Per Second Statistics on all Adapters.
readFailuresPerSec
The Total Read Failures Per Second Statistics on all Adapters.
writeFailuresPerSec
The Total Write Failures Per Second Statistics on all Adapters.

Download IPHost Network Monitor (500 monitors for 30 days, 50 monitors free forever) to start monitoring network devices right now.

MIBs list