SW-MIB Download

swCurrentDate

format.

swBootDate

displaybale textual format.

swFWLastUpdated

was last updated, in displayable textual format.

swFlashLastUpdated

was last updated, in displayable textual format.

swBootPromLastUpdated

was last updated, in displayable textual format.

swFirmwareVersion

The current version of the firwmare.

swOperStatus

The states are as follow: o online(1) means the switch is accessible by an external Fibre Channel port; o offline(2) means the switch is not accesible; o testing(3) means the switch is in a built-in test mode and is not accessible by an external Fibre Cha ...

swAdmStatus

A management station may place the switch in a desired state by setting this object accordingly. The states are as follow: o online(1) means set the switch to be accessible by an external Fibre Channel port; o offline(2) means set the switch to be inacces ...

swFlashDLOperStatus

The operational states are as follow: o current(1) indicates that the boot FLASH contains the current firmware image; and o upgraded(2) state indicates that it contains the image upgraded from the swFlashDLHost.0.

swFlashDLAdmStatus

A management station may place the boot FLASH in a desired state by setting this object accordingly. The sw-upgraded(2) state indicates that the boot FLASH shall be upgraded from the host specified in swFlashDLHost.0, with the user name specified in swFla ...

swFlashDLHost

to download the firmware image to the FLASH.

swFlashDLUser

image to the boot FLASH.

swFlashDLFile

The file name of the firmware image.

swDiagResult

diagnostics.

swNumSensors

The number of sensors inside the switch.

swSensorTable

The table of sensor entries.

swSensorEntry

An entry of the sensor information.

swSensorIndex

This object identifies the sensor.

swSensorType

This object identifies the sensor type.

swSensorStatus

The current status of the sensor.

swSensorValue

The value, -2147483648, represents an unknown quantity. It also means that the sensor does not have the capability to measure the actual value. In V1.6, the temperature sensor value will be in Celsius; the fan and power supply sensor reading will be unkno ...

swSensorInfo

In V1.6, it contains the sensor type and number in textual format. For example, 'Temp 3', 'Fan 6'.

swDomainID

To set a new value, the switch (swAdmStatus) must be in offline or testing state.

swPrincipalSwitch

the Principal switch as per FC-SW.

swNumNbs

neighborhood.

swNbTable

neighorhood of the switch.

swNbEntry

An entry containing each neighbor ISL parameters.

swNbIndex

This object identifies the neighbour ISL entry.

swNbMyPort

This is the port that has an ISL to another switch.

swNbRemDomain

of the ISL.

swNbRemPort

This is the port index on the other end of the ISL.

swNbBaudRate

The baud rate of the ISL.

swNbIslState

The current state of the ISL.

swAgtCmtyTable

the access control and parameters of the Community.

swAgtCmtyEntry

An entry containing the Community parameters.

swAgtCmtyIdx

This object identifies the SNMPv1 Community entry.

swAgtCmtyStr

If a new value is set successfully, it takes effect immediately.

swAgtTrapRcp

Community. If a new value is set successfully, it takes effect immediately.

swFCPortCapacity

switch. It includes G_Port, F_Port, FL_Port and any other types of Fibre Channel port.

swFCPortTable

configuration and service parameters of the port.

swFCPortEntry

parameters of the switch port.

swFCPortIndex

Note that the value of a port index is 1 higher than the port number labeled on the front panel. E.g. port index 1 correspond to port number 0.

swFCPortType

It may be of type stitch(1) or flannel(2).

swFCPortPhyState

the port: noCard(1) no card present in this switch slot; noGbic(2) no GBIC module in this port; laserFault(3) the module is signaling a laser fault (defective GBIC); noLight(4) the module is not receiving light; noSync(5) the module is receiving light but ...

swFCPortAdmStatus

may place the port in a desired state by setting this object accordingly. The testing(3) state indicates that no user frames can be passed. As the result of either explicit management action or per configuration information accessible by the switch, swFC ...

swFCPortTxWords

words that the port has transmitted.

swFCPortRxWords

words that the port has received.

swFCPortTxFrames

frames that the port has transmitted.

swFCPortRxFrames

frames that the port has received.

swFCPortTxC2Frames

frames that the port has transmitted.

swFCPortRxC3Frames

frames that the port has received.

swFCPortRxLCs

frames that the port has received.

swFCPortRxMcasts

frames that the port has received.

swFCPortTooManyRdys

exceeds the frames received.

swFCPortNoTxCredits

transmit credit has reached zero.

swFCPortRxEncInFrs

disparity error inside frames received.

swFCPortRxCrcs

detected for frames received.

swFCPortRxTruncs

frames that the port has received.

swFCPortRxTooLongs

are too long.

swFCPortRxBadEofs

have bad EOF delimiter.

swFCPortRxEncOutFrs

disparity error outside frames received.

swFCPortRxBadOs

Sets received.

swFCPortC3Discards

frames that the port has discarded.

swFCPortMcastTimedOuts

frames that has been timed out.

swFCPortTxMcasts

frames that has been transmitted.

swFCPortLipIns

that has been initiated by loop devices attached.

swFCPortLipOuts

that has been initiated by the port.

swFCPortLipLastAlpa

of the loop device that initiated the last Loop Initialization.

swNsLocalNumEntry

The number of local Name Server entries.

swNsLocalTable

The table of local Name Server entries.

swNsLocalEntry

An entry of the local Name Server database.

swNsPortIndex

The object identifies the Name Server database entry.

swNsPortID

ID of the entry.

swNsPortType

NL_Port, etc., for this entry. The type is defined in FC-GS-2.

swNsPortName

Name of the port entry.

swNsPortSymb

of the port entry. In FC-GS-2, a Symbolic Name consists of a byte array of 1 through 256 bytes, and the first byte of the array specifies the length of its 'contents'. This object variable corresponds to the 'contents' of the Symbolic Name, without the fi ...

swNsNodeName

Name of the associated node as defined in FC-GS-2.

swNsNodeSymb

of the the node associated with the entry. In FC-GS-2, a Symbolic Name consists of a byte array of 1 through 256 bytes, and the first byte of the array specifies the length of its 'contents'. This object variable corresponds to the 'contents' of the Symbo ...

swNsIPA

of the node for the entry as defined in FC-GS-2.

swNsIpAddress

for the entry as defined in FC-GS-2. The format of the address is in IPv6.

swNsCos

by the port. The value is a bit-map defined as follows: o bit 0 is class F, o bit 1 is class 1, o bit 2 is class 2, o bit 3 is class 3, o bit 4 is class 4, etc.

swNsFc4

by the port as defined in FC-GS-2.

swEventTrapLevel

level will be sent as a trap, swEventTrap, to configured trap recipients.

swEventNumEntries

The number of entries in the Event Table.

swEventTable

The table of event entries.

swEventEntry

An entry of the event table.

swEventIndex

This object identifies the event entry.

swEventTimeInfo

event occurred, in textual format.

swEventLevel

event entry.

swEventRepeatCount

event has occurred.

swEventDescr

the event.