TN3270E-MIB

TN3270E-MIB Download

MIBs list

This module defines a portion of the management information base (MIB) for managing TN3270E servers.

IPHost Network Monitor offer an easy way of SNMP monitoring your Cisco Servers, Routers, Switches, Bridges, Firewalls, Repeaters.

OID list for TN3270E-MIB

tn3270eSrvrConfTable
This table defines the configuration elements for TN3270E servers. The number of entries in this table is expected to vary depending on the location of the table. A particular TN3270E server is expected to have a single entry. Modeling of the configura ...
tn3270eSrvrConfEntry
Definition of the configuration elements for a single TN3270E server.
tn3270eSrvrConfIndex
Identifier for a single TN3270E server. tn3270eSrvrConfIndex values need not be contiguous.
tn3270eSrvrConfInactivityTimeout
The inactivity time-out specified in seconds. When a connection has been inactive for the number of seconds specified by this object it is closed. Only user traffic is considered when determining whether there has been activity on a connection. The defa ...
tn3270eSrvrConfConnectivityChk
This object enables TIMING-MARK processing, NOP processing, or neither for a TN3270E server.
tn3270eSrvrConfTmNopInactTime
The amount of time a connection must have had no traffic on it in order for a TIMING-MARK or NOP request to be sent on the connection. This value applies only when connections are being examined for recent activity on a scan interval controlled by the va ...
tn3270eSrvrConfTmNopInterval
The scan interval to be used by a TN3270E server when it examines its Telnet connections for recent activity. The server scans its Telnet connections on the interval provided by this object, looking for ones that have been idle for more than the value pro ...
tn3270eSrvrFunctionsSupported
This object indicates the functions supported by a TN3270E server.
tn3270eSrvrConfAdminStatus
The desired state of the TN3270E server represented by this entry in the table: up(1) - Activate this TN3270E server. down(2) - Informs the associated TN3270E server to gracefully terminate its processing. stopImmediate(3) - Informs th ...
tn3270eSrvrConfOperStatus
The current operational state of a TN3270E server. The following values are defined: up(1) - the server is active and accepting new client connections down(2) - the server is not active busy(3) - the server is active, but is n ...
tn3270eSrvrConfSessionTermState
This object determines what a TN3270E server should do when a TN3270 Session terminates: terminate(1) => Terminate the TCP connection. luSessionPend(2) => Do not drop the TCP connection associated with a client when its TN3270 session ends. Processin ...
tn3270eSrvrConfSrvrType
This object indicates the type of TN3270E server. The existence of MIB tables and objects that will be defined by follow-on MIBs may be predicated on whether the TN3270E server can be local to the same host as a target application (host(1)) or will always ...
tn3270eSrvrConfContact
This object provides a scratch pad for a TN3270E server administrator for storing information for later retrieval.
tn3270eSrvrConfRowStatus
This object allows entries to be created and deleted in the tn3270eSrvrConfTable. Entries may also be created and deleted as a result of implementation- dependent operations. With the exception of tn3270eSrvrConfSrvrType, which an implementation can easi ...
tn3270eSrvrConfLastActTime
This object reports the DateAndTime when a TN3270E server was most recently activated. The special value of all '00'Hs indicates that the server has never been active, i.e., that the value of tn3270eSrvrOperStatus has never been anything other than down(2 ...
tn3270eSrvrConfTmTimeout
The TIMING-MARK time-out, specified in seconds.
tn3270eSrvrPortTable
This table defines the TCP ports associated with TN3270E servers. No entry in this table shall exist without a corresponding (same tn3270eSrvrConfIndex) entry in the tn3270eSrvrConfTable existing. An implementation SHOULD NOT retain SNMP-created entries ...
tn3270eSrvrPortEntry
Definition of a single TCP port assignment to a TN3270E server. Assignment of a port on a local address basis is enabled though use of tn3270eSrvrPortAddrType and tn3270eSrvrPortAddress. A TCP port assignment that is not restricted to a local address SHA ...
tn3270eSrvrPort
Indicates a port assigned to a server.
tn3270eSrvrPortAddrType
Indicates the type of an address local to the host on which the TN3270E server resides that is represented in tn3270eSrvrPortAddress. A value of unknown(0) SHALL be used for this object when the port is not to be restricted to a local address.
tn3270eSrvrPortAddress
A local address on the host that a TN3270E server resides on that is associated with a TCP port that is to be used or is in use by a TN3270E server. tn3270eClientGroupAddrType indicates the address type (IPv4 or IPv6, for example). A zero-length octet str ...
tn3270eSrvrPortRowStatus
This object allows entries to be created and deleted in the tn3270eSrvrPortTable. Entries may also be created and deleted as a result of implementation- dependent operations. Since this is the only accessible object in this table, a Management Station ca ...
tn3270eSrvrStatsTable
This table defines a set of statistics concerning TN3270E server performance. No entry in this table shall exist without a corresponding (same tn3270eSrvrConfIndex) entry in the tn3270eSrvrConfTable existing.
tn3270eSrvrStatsEntry
A collection of statistical and maximum usage objects for a single TN3270 server. An entry can represent the total activity of the server, or it can represent the activity occurring at the server on either a port or a port-and-local-address basis. Collec ...
tn3270eSrvrStatsMaxTerms
Indicates the maximum number of terminal LUs available for use at a TN3270E server for the granularity of this conceptual row (server-wide, port, or port-and-local-address).
tn3270eSrvrStatsInUseTerms
Indicates the number of terminal LUs currently in use at a TN3270E server for the granularity of this conceptual row (server-wide, port, or port-and-local-address).
tn3270eSrvrStatsSpareTerms
Indicates the number of free terminal LUs at a TN3270E server for the granularity of this conceptual row (server-wide, port, or port-and-local-address). It is possible that the difference between tn3270eSrvrStatsMaxTerms and tn3270eSrvrStatsInUseTerms in ...
tn3270eSrvrStatsMaxPtrs
Indicates the maximum number of printer resources available for use by a TN3270E server for the granularity of this conceptual row (server-wide, port, or port-and-local-address).
tn3270eSrvrStatsInUsePtrs
Indicates the number of printer resources currently in use by a TN3270E server for the granularity of this conceptual row (server-wide, port, or port-and-local-address).
tn3270eSrvrStatsSparePtrs
Indicates the number of free printer resources at a TN3270E server for the granularity of this conceptual row (server-wide, port, or port-and-local-address). It is possible that the difference between tn3270eSrvrStatsMaxPtrs and tn3270eSrvrStatsInUsePtrs ...
tn3270eSrvrStatsInConnects
Indicates the number of client (TCP) connections that succeeded at a TN3270E server for the granularity of this conceptual row (server-wide, port, or port-and-local-address). The tn3270eSrvrStatsConnResrceRejs and tn3270eSrvrStatsConnErrorRejs objects pro ...
tn3270eSrvrStatsConnResrceRejs
Indicates the number of (TCP) connections rejected during connection setup at a TN3270E server for the granularity of this conceptual row (server-wide, port, or port-and-local-address) due to a lack of resources at the server. An example of when this cou ...
tn3270eSrvrStatsDisconnects
Indicates the number of (TCP) connections that were disconnected at a TN3270E server for the granularity of this conceptual row (server-wide, port, or port-and-local-address). A Management Station can detect discontinuities in this counter by monitoring t ...
tn3270eSrvrStatsHCInOctets
Indicates the number of octets received from TN3270 and TN3270E clients for the granularity of this conceptual row (server-wide, port, or port-and-local-address). A Management Station can detect discontinuities in this counter by monitoring the tn3270eSrv ...
tn3270eSrvrStatsInOctets
Low-order 32 bits of tn3270eSrvrStatsHCInOctets for this conceptual row. A Management Station can detect discontinuities in this counter by monitoring the tn3270eSrvrStatsUpTime object.
tn3270eSrvrStatsHCOutOctets
Indicates the number of octets sent to TN3270 and TN3270E clients for the granularity of this conceptual row (server-wide, port, or port-and-local-address). A Management Station can detect discontinuities in this counter by monitoring the tn3270eSrvrStats ...
tn3270eSrvrStatsOutOctets
Low-order 32 bits of tn3270eSrvrStatsHCOutOctets for this conceptual row. A Management Station can detect discontinuities in this counter by monitoring the tn3270eSrvrStatsUpTime object.
tn3270eSrvrStatsConnErrorRejs
Indicates the number of (TCP) connections rejected during connection setup at a TN3270E server for the granularity of this conceptual row (server-wide, port, or port-and-local-address) due to an error of some type. An example of when this counter would b ...
tn3270eClientGroupTable
This table defines client address groupings for use by a TN3270E server. No entry in this table shall exist without a corresponding (same tn3270eSrvrConfIndex) entry in the tn3270eSrvrConfTable existing. An implementation SHOULD NOT retain SNMP-created en ...
tn3270eClientGroupEntry
Definition of a single client address entry. All entries with the same first two indexes, tn3270eSrvrConfIndex and tn3270eClientGroupName, are considered to be in the same client group.
tn3270eClientGroupName
The name of a client group. Note: client group names are required to be unique only with respect to a single TN3270E server.
tn3270eClientGroupAddrType
Indicates the type of the address represented in tn3270eClientGroupAddress.
tn3270eClientGroupAddress
The client address of a member of a client group. The value of tn3270eClientGroupAddrType indicates the address type (IPv4 or IPv6, for example).
tn3270eClientGroupSubnetMask
The corresponding subnet mask associated with tn3270eClientGroupAddress. A single IP address is represented by having this object contain the value of 255.255.255.255. This object's value is meaningful only if tn3270eClientGroupAddrType has a value of ip ...
tn3270eClientGroupPfxLength
The corresponding IPv6 network prefix length. This object's value is meaningful only if tn3270eClientGroupAddrType has a value of ipv6(2).
tn3270eClientGroupRowStatus
This object allows entries to be created and deleted in the tn3270eClientGroupTable. Entries may also be created and deleted as a result of implementation- dependent operations. An entry in this table is deleted by setting this object to destroy(6). Whe ...
tn3270eResPoolTable
This table defines resource groupings; the term 'pool' is used as it is defined by RFC 2355. No entry in this table shall exist without a corresponding (same tn3270eSrvrConfIndex) entry in the tn3270eSrvrConfTable existing. An implementation SHOULD NOT re ...
tn3270eResPoolEntry
Definition of a single resource pool member. All entries with the same first two indexes, tn3270eSrvrConfIndex and tn3270eResPoolName, are considered to be in the same pool.
tn3270eResPoolName
The name of a resource pool.
tn3270eResPoolElementName
The name of a member of a resource pool.
tn3270eResPoolElementType
The type of the entity in a resource pool.
tn3270eResPoolRowStatus
This object allows entries to be created and deleted in the tn3270eResPoolTable. Entries may also be created and deleted as a result of implementation- dependent operations. An entry in this table is deleted by setting this object to destroy(6). When al ...
tn3270eSnaMapTable
This table provide a mapping from the name by which a secondary LU is known in the SNA network to the name by which it is known locally at the TN3270e server. This latter name serves as an index into the tn3270eResPoolTable and the tn3270eResMapTable. No ...
tn3270eSnaMapEntry
Definition of a single mapping from an SSCP-supplied SLU name to a local SLU name. Note: In certain pathological cases, it is possible that an SSCP will send on an ACTLU for a local LU an SLU name currently represented by an entry in this table that asso ...
tn3270eSnaMapSscpSuppliedName
The name of the secondary LU (SLU) as it is known in the SNA network. This name is sent by the SSCP on the Activate Logical Unit (ACTLU) request.
tn3270eSnaMapLocalName
The local name of the secondary LU (SLU).
tn3270eSnaMapPrimaryLuName
When there is a currently active LU-LU session for this connection, this object returns the primary LU (PLU) name from the BIND. When there is no active LU-LU session, or when the PLU name is unavailable for some other reason, this object returns a zero- ...
tn3270eClientResMapTable
This table defines resource-pool to client-group mappings. Since both the resource pool name and client group name are included in the index clause of this table, multiple resource pools can be assigned to the same client group. This enables use of mult ...
tn3270eClientResMapEntry
Definition of a single resource pool to client group mapping.
tn3270eClientResMapPoolName
The name of a resource pool.
tn3270eClientResMapClientGroupName
The name of the client group that is mapped to a resource pool.
tn3270eClientResMapClientPort
A port number restricting the scope of a mapping from a resource pool to a client group. The value 0 for this object indicates that the scope of the mapping is not restricted.
tn3270eClientResMapRowStatus
This object allows entries to be created and deleted in the tn3270eClientResMapTable. Entries may also be created and deleted as a result of implementation- dependent operations. An entry in this table is deleted by setting this object to destroy(6). Re ...
tn3270eResMapTable
This table defines the actual mapping of a resource to a client address. No entry in this table shall exist without a corresponding (same tn3270eSrvrConfIndex) entry in the tn3270eSrvrConfTable existing.
tn3270eResMapEntry
Definition of the mapping of a Resource Element to a client address.
tn3270eResMapElementName
The name of a resource element. This is the name by which the server implementing this table knows the resource. It may be different from the name by which the resource is known in the SNA network. This latter name is returned in the tn3270eResMapSscpS ...
tn3270eResMapAddrType
Indicates the type of the client address represented in tn3270eResMapAddress.
tn3270eResMapAddress
A client address.
tn3270eResMapPort
A client port.
tn3270eResMapElementType
The type of the associated resource element.
tn3270eResMapSscpSuppliedName
The name of the secondary LU (SLU) as it is known in a SNA network. This name is sent by the SSCP on the Activate Logical Unit (ACTLU) request. If this name is not known, this object returns a zero-length octet string.
tn3270eTcpConnTable
This table has an entry for each TN3270(E) client connection that is currently active at a TN3270E server. An implementation MAY retain entries for connections that have been terminated, but which entries are retained, how many entries are retained, and h ...
tn3270eTcpConnEntry
Provides information about a single TN3270/TN3270E session. Note: a tn3270eSrvrConfIndex is not needed in this table, since the combination of remote and local addresses and ports is sufficient to guarantee uniqueness across the TN3270E servers serviced ...
tn3270eTcpConnRemAddrType
Indicates the type of the value of the tn3270eTcpConnRemAddress object. For example, ipv4(1) or ipv6(2).
tn3270eTcpConnRemAddress
The remote address associated with a TN3270E client. tn3270eTcpConnRemAddrType indicates the address type (IPv4 or IPv6, for example). If a TN3270(E) client is connected to its server via a proxy client the address represented by the value of this object ...
tn3270eTcpConnRemPort
The remote port associated with a TN3270E client. The value 0 is used if the tn3270eTcpConnRemAddrType identifies an address type that does not support ports. If a TN3270(E) client is connected to its server via a proxy client, the port represented by th ...
tn3270eTcpConnLocalAddrType
Indicates the type of the value of the tn3270eTcpConnLocalAddress object. For example, ipv4(1) or ipv6(2).
tn3270eTcpConnLocalAddress
The local address associated with a TN3270E client. tn3270eTcpConnRemAddrType indicates the address type (IPv4 or IPv6, for example).
tn3270eTcpConnLocalPort
The remote port associated with a TN3270E client.
tn3270eTcpConnLastActivity
The number of 100ths of seconds since any data was transferred for the associated TCP Connection.
tn3270eTcpConnBytesIn
The number of bytes received by the server from TCP for this connection. A Management Station can detect discontinuities in this counter by monitoring the tn3270eTcpConnActivationTime object.
tn3270eTcpConnBytesOut
The number of bytes sent to TCP for this connection. A Management Station can detect discontinuities in this counter by monitoring the tn3270eTcpConnActivationTime object.
tn3270eTcpConnResourceElement
LU/Print secondary name for connecting an client into an SNA network.
tn3270eTcpConnResourceType
Indicates the type of resource identified by tn3270eTcpConnResourceElement.
tn3270eTcpConnDeviceType
Indicates the device type if negotiated with the client. A value of unknown(100) should be used as the value of this object when a device type is not negotiated. Refer to RFC 2355 for how device types can be negotiated.
tn3270eTcpConnFunctions
This object indicates which of the TN3270 and TN3270E functions were negotiated by the server and the client for this TCP connection. Refer to tn3270eSrvrFunctionsSupported for the list of these functions supported by the server.
tn3270eTcpConnId
The connection identifier associated with a TN3270 or a TN3270E session's TCP connection. TCP implementations often assign a unique (with respect to itself) unsigned integer as an identifier for a TCP connection. The value 0 indicates that a connection d ...
tn3270eTcpConnClientIdFormat
The format of a corresponding tn3270eTcpConnClientId object as defined by the IANSTn3270eClientType textual convention imported from the IANATn3270eTC-MIB.
tn3270eTcpConnClientId
Additional client identification information. The type of this information is indicated by the value of the corresponding tn3270eTcpConnClientIdFormat object. All values are returned in network-byte order. The purpose of this object is to provide an alte ...
tn3270eTcpConnTraceData
Trace data for this session.
tn3270eTcpConnLogInfo
Log information, encoded as specified in the IANATn3270eLogData textual convention from the IANAtn3270eTC-MIB.
tn3270eTcpConnLuLuBindImage
When there is a currently active LU-LU session for this connection, this object returns the BIND Image (defined to be bytes 1-p of the complete BIND Request Unit -- see 'SNA Formats' for more information) that was received from the PLU during session acti ...
tn3270eTcpConnSnaState
The current state of the SNA side of the end-to-end TN3270 connection. The following states are defined: unknown(1) - The true state is not known. noSluSession(2) - The SLU has neither an SSCP-LU nor an LU-LU session active. sscpLuSession(3) ...
tn3270eTcpConnStateLastDiscReason
The last disconnect reason. A session that has not experienced a disconnect shall use the value unknown(1) for this object. Depending on when an implementation removes entries from this table, certain states may never be returned.
tn3270eTcpConnSrvrConfIndex
tn3270eSrvrConfIndex of the tn3270eSrvrConfEntry belonging to the TN3270E server to which this entry belongs.
tn3270eTcpConnActivationTime
The value of the sysUpTime object the last time this TCP connection became active.
tn3270eConfSpinLock
An advisory lock used to allow cooperating TN3270E-MIB applications to coordinate their use of the tn3270eSrvrConfTable, the tn3270eSrvrPortTable, the tn3270eClientGroupTable, the tn3270eResPoolTable, and the tn3270eClientResMapTable. When creating a new ...
tn3270eBasicGroup
This group is mandatory for all hosts supporting the TN3270E-MIB.
tn3270eSessionGroup
This group is mandatory for all hosts supporting the TN3270E-MIB.
tn3270eResMapGroup
This group is optional for all hosts supporting the TN3270E-MIB.
tn3270eHiCapacityGroup
Support of these objects is REQUIRED when the Counter32 versions can potentially wrap too frequently. This group is optional for all other hosts supporting the TN3270E-MIB. The IF-MIB (RFC 2233) requires that the 64-bit versions of its counters be implem ...

Download IPHost Network Monitor (500 monitors for 30 days, 50 monitors free forever) to start monitoring network devices right now.

MIBs list