ZYXEL-accessSwitch-MIB Download
With the IPHost SNMP tool, you can monitor any SNMP objects of the
ZYXEL-accessSwitch-MIB
. You can select a variable to monitor using the built-in IPHost MIB browser that provides you with all variables,
their current values and descriptions taken from the
ZYXEL-accessSwitch-MIB
.
OID list for ZYXEL-accessSwitch-MIB
- accessSwitchSystemCurrentStatus
- The sysCurrentStatus is a bit map represented as a sum, therefore, it can represent multiple defects simultaneously. The sysNoDefect should be set if and only if no other flag is set. The various bit positions are: 1 sysNoDefect 2 sysOverHeat 3 sysFa ...
- accessSwitchProblemCause
- The variable is the description of sytsem problem.
- accessSwitchSystemTemperature
- The variable is the current temperature in Celsius of the system.
- accessSwitchFanRpmTable
- A table that contains rpm information about the fans.
- accessSwitchFanRpmEntry
- A list of rpm information for each fan.
- accessSwitchFanRpmIndex
- The identity of the fan.
- accessSwitchFanRpmCurValue
- The current rpm of the fan.
- accessSwitchFanRpmMaxValue
- The maximum rpm ever performed by the fan.
- accessSwitchFanRpmMinValue
- The minimum rpm ever performed by the fan.
- accessSwitchFanRpmLowThresh
- The low threshold of the rpm of the fan. If the current rpm is less than the threshold, the device will initiate the fanRpmLow trap.
- accessSwitchFanRpmDescr
- The description of the fan (e.g. location, function, etc.).
- accessSwitchVoltageTable
- A table that contains voltage information about the system.
- accessSwitchVoltageEntry
- A list of voltage information for each sensor.
- accessSwitchVoltageIndex
- The identity of the sensor.
- accessSwitchVoltageCurValue
- The current voltage detected by the sensor (in milli-voltage).
- accessSwitchVoltageMaxValue
- The maximum voltage ever detected by the sensor (in milli-voltage).
- accessSwitchVoltageMinValue
- The minimum voltage ever detected by the sensor (in milli-voltage).
- accessSwitchVoltageNominalValue
- The nominal voltage which the power should supply (in milli-voltage).
- accessSwitchVoltageLowThresh
- The low threshold of the voltage. If the current voltage is less than the threshold, the device will initiate the voltageLow trap.
- accessSwitchVoltageDescr
- The description of the voltage (e.g. location, nominal value, etc.).
- accessSwitchSysTempTable
- A table that contains temperature information about system.
- accessSwitchSysTempEntry
- A list of temperature information for each sensor.
- accessSwitchSysTempIndex
- The identity of the sensor.
- accessSwitchSysTempCurValue
- The current temperature detected in Celsius by the sensor.
- accessSwitchSysTempMaxValue
- The maximum temperature ever detected in Celsius by the sensor.
- accessSwitchSysTempMinValue
- The minimum temperature ever detected in Celsius by the sensor.
- accessSwitchSysTempHighThresh
- The high threshold of the temperature in Celsius. If the current temperature is higher than the threshold, the device will initiate the overheat trap.
- accessSwitchSysTempDescr
- The description of the temperature sensor (e.g. location, function, etc.).
- accessSwitchMaintenance
- The managed object is for system maintenance. When the EMS wants to trigger the system maitenance operation, the EMS shall send SNMP-SET message to set the corresponding bit value to be 1. The various bit positions are: BIT 1: config save BIT 2: reset BIT ...
- accessSwitchMaintenancePort
- The port which the maintenance operation should be performed on. The value of 0 means the maintenance should be performed on the system.
- accessSwitchMaxNumOfStaticVlans
- The maximum number of static VLANs which the system supports
- acccessSwitchChassisId
- The chassis Id of the module
- accessSwitchSlotId
- The slot Id of the module
- accessSwitchModuleType
- The type of the module
- accessSwitchFWVersion
- The firmware version of the access switch.
- accessSwitchDriverVersion
- The driver version of the access port in this access switch
- accessSwitchModemCodeVersion
- The modem code version of the access port in this access switch
- accessSwitchDSLConfOps
- The managed object is for xDSL line configuration. When the EMS wants to issue the desired operation, the EMS shall send SNMP-SET message to set the corresponding bit value to be 1. The various bit positions are: BIT 1: enable port BIT 2: disable port BIT ...
- accessSwitchDSLConfTarget
- The managed object is used for identify the target on which the line configuration should be performed. The target is encoded as: Byte 1~4: reserved Byte 5~7: each octet specifies a set of eight ports, with the first octet specifying ports 1 through 8, et ...
- accessSwitchDSLConfProfileName
- The DSL profile name
- accessSwitchDSLConfMode
- The DSL mode. The semantic for each bit is: Bit 1: ADSL, G.lite Bit 2: ADSL, G.dmt Bit 3: ADSL, T1.413 Bit 4: ADSL, Auto
- asPacketForwardingTable
- This table includes the configuration of packet forwarding.
- asPacketForwardingEntry
- An entry in asPacketForwardingTable.
- asPacketForwardingPortList
- The list defines the ports to which the packets will be forwarded.
- asDhcpRelayEnable
- Enable/disable DHCP relay function.
- asDhcpRelayOption82Enable
- Enable/disable the relay agent information option.
- asDhcpRelayOption82Info
- User specific relay agent information.
- asMaxNumOfDhcpServers
- The maximum number of DHCP servers.
- asDhcpServerTable
- A table that contains DHCP server information.
- asDhcpServerEntry
- The entry of DHCP server table.
- asDhcpServerIp
- The IP address of the DHCP server.
- asDhcpServerRowStatus
- The row status of the DHCP server entry.
- asRadiusServerTable
- A table that contains Radius Server information.
- asRadiusServerEntry
- The entry of Radius Server table.
- asRadiusServerIndex
- The identity of the RADIUS server.
- asRadiusServerIp
- The IP address of the Radius Server.
- asRadiusServerPort
- The UDP port of the Radius Server.
- asRadiusSharedSecret
- The shared secret of the Radius Server.
- asRadiusServerRowStatus
- The row status of the Radius Server entry.
- asDot1xEnable
- Enable/disable the 802.1x function.
- asDot1xPortTable
- This table includes the configuration of 802.1x.
- asDot1xPortEntry
- An entry in asDot1xPortTable.
- asDot1xPortEnable
- The option defines if the port enables 802.1x settings.
- asDot1xPortControl
- The configuration defines the 802.1x port control type.
- asDot1xPortReAuthEnable
- The option defines if the port enables 802.1x re-authentication.
- asDot1xPortReAuthPeriod
- The configuration defines the 802.1x re-authentication period for each port.
Download IPHost Network Monitor (500 monitors for 30 days, 50 monitors free forever) to start monitoring network devices right now.
Witn IPHost SNMP monitor you can monitor network performance, audit network usage, detect network faults, or inappropriate access.
The IPHost's SNMP monitor can communicate and interact with any SNMP-enabled device.
