dot5-log-mib Download

tRingMgmtRingName

The ASCII name assigned to this ring. This name defaults to 'Network n', where n is a unique integer value from 1 to n.

tRingMgmtStnPortCount

Returns the total number of physical ports on this ring which may be controlled by this device.

tRingMgmtRingPortCount

Returns the total number of ring in/out ports on this ring which may be controlled by this device.

tRingMgmtStnPortsEnable

Setting this object to enable will cause all the station ports on the ring which may be controlled by this device to be enabled. Setting this object to noEnable will have no effect. When read this object will always return noEnable.

tRingMgmtRingPortsEnable

Setting this object to enable will cause all the ring in/out ports on the ring which may be controlled by this device to be enabled. Setting this object to noEnable will have no effect. When read this object will always return noEnable.

tRingMgmtStnPortsOn

Returns the total number of enabled station ports on this ring which may be controlled by this device.

tRingMgmtRingPortsOn

Returns the total number of enabled ring in/out ports on this ring which may be controlled by this device.

tRingMgmtStations

Returns the number of stations currently inserted on the ring, if known (includes this device). If not known, returns zero.

tRingMgmtRingState

Returns the operational state of the ring, if known.

tRingMgmtRingSpeed

Returns the ring speed of the ring, if known. The speed is designated by the value returned: unknown..............0 fourMegaBits.........4 sixteenMegaBits.....16 ::= { tRingMgmtRing 10 } SYNTAX OCTET STRING (SIZE(6)) ACCESS read-only STATUS m ...

tRingMgmtRingNumber

A read of this object returns the ring number of the attached ring. If the ring number is indeterminate, a zero is returned.

tRingMgmtBeaconRecovery

This object controls the operation of beacon recovery. A write of disable to this object will cause the beacon recovery process to become inactive on this host. A write of enable will cause the beacon recovery process to become active. If beacon recove ...

tRingMgmtBcnRecRingPortRetryCount

This object defines the number of times a token ring ring port will be re-enabled after it has been determined that the port is causing the ring to beacon. Values other than 0-100 and 999 will result in MIB bad value. Default of object is product dependen ...

tRingMgmtBcnRecRingPortRetryDelay

This object defines the time delay between disabling a token ring ring port due to beaconing and re-enabling the port to check the state of the ring port. Setting this object to zero disables retry queue. Non-zero value is delay in seconds. Some products ...

tRingMgmtBcnRecStnPortRetryCount

This object defines the number of times a token ring station port will be re-enabled after it has been determined that the port is causing the ring to beacon. Values other than 0-100 and 999 will result in MIB bad value. Default of object is product depe ...

tRingMgmtBcnRecStnPortRetryDelay

This object defines the time delay between disabling a token ring station port due to beaconing and re-enabling the port to check the state of the station port. Setting this object to zero disables retry queue. Non-zero value is delay in seconds. Some pr ...

tRingMgmtBcnRecBrdBypassRetryCount

This object defines the number of times a token ring MIM board, having been bypassed by beacon recovery, will be un-bypassed to determine if the MIM board is causing the ring to beacon. Values other than 0-100 and 999 will result in MIB bad value. Valid i ...

tRingMgmtBcnRecBrdBypassRetryDelay

This object defines the time delay between bypassing a token ring MIM board due to beaconing and re-enabling the MIM board to check the state of the board. Setting this object to zero disables retry queue. Non-zero value is delay in seconds with a delay ...

tRingMgmtBcnRecBrdWrapRetryCount

This object defines the number of times a token ring MIM board, having been wrapped left or right by beacon recovery, will be un-wrapped to determine if the MIM board is causing the ring to beacon. Values other than 0-100 and 999 will result in MIB bad va ...

tRingMgmtBcnRecBrdWrapRetryDelay

This object defines the time delay between wrapping a token ring MIM board left or right due to beaconing and un-wrapping the MIM board to check the state of the board. Setting this object to zero disables retry queue. Non-zero value is delay in seconds ...

tRingMgmtRingPollRecovery

This object controls the operation of ring poll failure recovery. A write of disable to this object will cause the ring poll failure recovery process to become inactive on this host. A write of enable will cause the ring poll failure recovery process to ...

tRingMgmtStnTable

A list of the stations, by MAC address, participating in the ring poll process of this ring.

tRingMgmtStnEntry

A list of the objects pertaining to a station participating in the ring poll process of this ring.

tRingMgmtStnAddress

Returns the MAC address of the station for which the information in this table pertains.

tRingMgmtStnName

An ASCII name assigned to this station.

tRingMgmtStnBoard

Returns the slot number of the Token Ring board this station is connected to. Board numbers are given as 1 thru n. If unknown, a zero is returned.

tRingMgmtStnPort

Returns the port number of the port on the Token Ring board this station is connected to. Port numbers are given as 1 thru n. If unknown, a zero is returned.

tRingMgmtStnUNA

Returns the address of the station's nearest upstream neighbor. If unknown, the NULL address (00-00-00-00-00-00) is returned.

tRingMgmtStnDNA

Returns the address of the station's nearest downstream neighbor. If unknown, the NULL address (00-00-00-00-00-00) is returned.

tRingMgmtStnPhysLocation

A read of this object returns the physical location of the station. A write of this object assigns a user-defined value indicative of the physical location, or drop, of the station. If the location is unknown or cannot be determined, a zero is returned.

tRingMgmtStnFuncClasses

A read of this object returns the station's enabled function class mask.

tRingMgmtStnPriority

A read of this object returns the station's maximum access priority.

tRingMgmtStnRemoveStn

A write of remove to this object will cause the station to remove itself from the ring. A write of noRemove will do nothing. A read of this object will return the last request made.

tRingMgmtHostCommands

A write to this object performs the indicated command. Either of the reset commands will reset the adapter using default parameters and both imply re-insertion onto the ring. A read of this object will return the last command issued to the adapter.

tRingMgmtHostOpenStatus

A read of this object will return the result of the last open command issued to the adapter.

tRingMgmtHostErrorStatus

A read of this object will return the last error status returned by the adapter. The status is the sum of the applicable error codes listed below: No Problem Detected..................0 Ring Recovery.......................32 Single Station............... ...

tRingMgmtHostTErrorReport

A read of this object returns the host's error report timer value. The default timer value is defined as two seconds by the adapter's manufacturer.

tRingMgmtHostLocalAdminMac

A read of this object returns the MAC address assigned to the interface attached to this network. A write of this object provides for a locally administered MAC address.

tRingMgmtSecurityAdminState

A write to this object will either disable the security feature, enable Station Added trap being sent, or enable security withecurity feature with the remove station MAC frame being sent in addition to sending the Station Removed trap. A read of this obj ...

tRingMgmtSecurityAddressAdd

A write to this object will add a station's MAC address to the current secure station list within the device. The source routing bit within the MAC address is ignored. If the security list has reached its maximum number of entries, a BAD_VALUE error is r ...

tRingMgmtSecurityAddressRemove

A write to this object will remove a station's MAC address from the current secure station list within the device. The source routing bit within the MAC address is ignored. If a station is not found on the list, a BAD_VALUE error is returned. A read of ...

tRingMgmtSecurityStnCount

Returns the number of stations on the secure station list.

tRingMgmtSecurityTable

The list of secure stations allowed on the ring.

tRingMgmtSecurityEntry

A list of objects pertaining to a station allowed on this ring.

tRingMgmtSecurityIfIndex

A read of this object will return the MIB-II ifIndex to the ring interface the station referenced by this MAC Address was seen on.

tRingMgmtSecurityStnAddress

Returns the MAC address of the station on the secure station list

tRingStatsRingFrames

Returns the total number of all LLC frames that have passed around this ring. If this value cannot be determined, a zero is returned.

tRingStatsRingKBytes

Returns the total number of kilobytes from LLC frames that have passed around this ring. If this value cannot be determined, a zero is returned.

tRingStatsRingLineErrors

Returns the total number of line errors that have occurred on this ring.

tRingStatsRingBurstErrors

Returns the total number of burst errors that have occurred on this ring.

tRingStatsRingACErrors

Returns the total number of address/copied errors that have occurred on this ring.

tRingStatsRingAbortSequences

Returns the total number of abort sequences that have been transmitted on this ring.

tRingStatsRingInternalErrors

Returns the number of internal errors that stations on this ring have detected.

tRingStatsRingLostFrames

Returns the number of lost frames that have been detected on this ring.

tRingStatsRingCongestErrors

Returns the number of times stations on this ring have reported receiver congestion errors.

tRingStatsRingFCErrors

Returns the number of frame copied errors that have occurred on this ring.

tRingStatsRingTokenErrors

Returns the number of token errors that have occurred on this ring.

tRingStatsRingFreqErrors

Returns the total number of frequency errors on this ring.

tRingStatsRingTotalErrors

This object returns the total number of errors reported by the objects in this table (tRingStatsRingErrs 3 thru tRingStatsRingErrs 12) that have occurred on this ring.

tRingStatsRingAMChanges

Returns the number of times the active monitor has changed on this ring.

tRingStatsRingRingPurges

Returns the number of times the active monitor has purged the ring.

tRingStatsRingBeaconEvents

Returns the number of times this ring has entered the beaconing state.

tRingStatsRingLongestBeacon

Returns the length of time in TimeTicks of the longest beaconing state on this ring.

tRingStatsRingLastBeacon

Returns the length of time in TimeTicks of the last beaconing state on this ring.

tRingStatsRingLastBeaconType

Returns the type of beaconing frames last seen on the ring.

tRingStatsRingPollFailureNoRecovery

Returns the number of times this ring could not recover from a ring poll failure since the last time this object was reset.

tRingStatsRingPollFailureNNIFrameCount

Returns the number of times this device has detected Neighbor Notification Incomplete MAC frames on the ring since the last time this object was reset

tRingStatsRingPollFailureNNIFrameAddress

Returns the MAC address of the ring station that last successfully participated in the ring poll process during and after the ring poll failure process has executed. A value of 00-00-00-00-00-00 indicates that a ring poll has been detected.

tRingStatsRingPollFailureLastNNIFrameTime

Returns the timestamp of the last time a Neighbor Notification Complete MAC frame was received since the last time this object was reset. A value of zero indicates that no NNI frame was received.

tRingStatsRingPollFailureLastDNAAddress

Returns the last known downstream neighbor MAC address of the ring station that was reported in the Neighbor Notification Incomplete MAC frame. A value of 00-00-00-00-00-00 indicates that no NNI frame was yet received.

tRingStatsRingProtocolSnaFrames

Returns the count of SNA frames seen on this ring.

tRingStatsRingProtocolXnsFrames

Returns the count of XNS frames seen on this ring.

tRingStatsRingProtocolTcpIpFrames

Returns the count of TCP/IP frames seen on this ring.

tRingStatsRingProtocolBanyanFrames

Returns the count of Banyan frames seen on this ring.

tRingStatsRingProtocolIpxFrames

Returns the count of Novell IPX frames seen on this ring.

tRingStatsRingProtocolNetbiosFrames

Returns the count of NetBIOS frames seen on this ring.

tRingStatsRingProtocolLanNetMgrFrames

Returns the count of LAN Network Manager frames seen on this ring.

tRingStatsRingProtocolOtherFrames

Returns the count of all other frame types seen on this ring.

tRingStatsRingFramesizeUpTo63Bytes

Returns the count of frames less than 64 bytes in size seen on this ring.

tRingStatsRingFramesize64To127Bytes

Returns the count of frames between 64 bytes and 127 bytes in size seen on this ring.

tRingStatsRingFramesize128To255Bytes

Returns the count of frames between 128 bytes and 255 bytes in size seen on this ring.

tRingStatsRingFramesize256To511Bytes

Returns the count of frames between 256 bytes and 511 bytes in size seen on this ring.

tRingStatsRingFramesize512To1023Bytes

Returns the count of frames between 512 bytes and 1023 bytes in size seen on this ring.

tRingStatsRingFramesize1024To2047Bytes

Returns the count of frames between 1024 bytes and 2047 bytes in size seen on this ring.

tRingStatsRingFramesize2048To4095Bytes

Returns the count of frames between 2048 bytes and 4095 bytes in size seen on this ring.

tRingStatsRingFramesize4096AndUpBytes

Returns the count of frames greater than 4096 bytes in size seen on this ring.

tRingStatsStnTable

A list of statistical objects reported by the stations participating in the ring poll process of this ring.

tRingStatsStnEntry

A list of statistical objects reported by a station which is participating in the ring poll process of this ring.

tRingStatsStnAddress

Returns the MAC address to the station port for which the information in this table pertains.

tRingStatsStnFrames

This object returns the total number of LLC frames that have originated from this station.

tRingStatsStnBytes

Returns the total number of bytes from all LLC frames that have originated from this station.

tRingStatsStnLineErrors

This object gives the number of line errors that have been detected by the station.

tRingStatsStnBurstErrors

This object gives the number of burst errors that have been detected by the station.

tRingStatsStnACErrors

Returns the total number of address/copied errors that that have been detected by the station.

tRingStatsStnAbortSequences

This object gives the number of abort sequences that have been sent by the station.

tRingStatsStnInternalErrors

This object gives the number of internal errors that have been detected by the station.

tRingStatsStnLostFrames

This object gives the number of lost frames that have been detected by the station.

tRingStatsStnCongestErrors

This object gives the number of congestion errors that have been occurred at the station.

tRingStatsStnFCErrors

This object gives the number of frame copied errors that have been detected by the station.

tRingStatsStnTokenErrors

This object gives the number of token errors that have been detected by the station while it was acting as the active monitor.

tRingStatsStnFreqErrors

This object gives the number of frequency errors that have been detected by the station.

tRingStatsStnErrors

This object returns the sum of all errors reported by this table (tRingStatsStnEntry 4 thru tRingStatsStnEntry 13) that have been detected by this station.

tRingStatsResetCounters

This object, when written with the value resetCounters, would reset all of this MIB's counter objects associated with the stations on this ring. This in turn resets all of this MIB's counter objects associated with this ring. Writing this object with the ...

tRingStatsResetTime

This object reports the time in TimeTicks that this ring's statistical counters were last reset via the tRingStatsResetCounters command. If the counters have not been reset, this value is zero.

tRingAlarmsRingTimebase

Get/Set alarm timebase. This timebase is used for all alarms pertaining to this ring (including station alarms). Measured in seconds. Minimum interval (default)...10 secs.

tRingAlarmsRingRingPurgesEnable

A write of value 2 will enable the Ring Purges threshold alarm. A write of value 1 will disable this threshold alarm (default).

tRingAlarmsRingAMPErrsEnable

A write of value 2 will enable the Active Monitor Error threshold alarm. A write of value 1 will disable this threshold alarm (default).

tRingAlarmsRingTokenErrsEnable

A write of value 2 will enable the Token Errors threshold alarm. A write of value 1 will disable this threshold alarm (default).

tRingAlarmsRingClaimTknErrsEnable

A write of value 2 will enable the Claim Token Errors threshold alarm. A write of value 1 will disable this threshold alarm (default).

tRingAlarmsRingLostFramesEnable

A write of value 2 will enable the Lost Frames threshold alarm. A write of value 1 will disable this threshold alarm (default).

tRingAlarmsRingBeaconStateEnable

A write of value 2 will enable the Beacon State threshold alarm. A write of value 1 will disable this threshold alarm (default).

tRingAlarmsRingFrameCountEnable

A write of value 2 will enable the total Frame Count threshold alarm. A write of value 1 will disable this threshold alarm (default).

tRingAlarmsRingRingPurgesThreshold

The threshold alarm value for Ring Purges. Valid ranges are 1 to 36000 with a default value of 70.

tRingAlarmsRingAMPErrsThreshold

The threshold alarm value for Active Monitor Errors. Valid ranges are 1 to 1800 with a default value of 1.

tRingAlarmsRingTokenErrsThreshold

The threshold alarm value for Token Errors. Valid ranges are 5 to 7200 with a default value of 10.

tRingAlarmsRingClaimTknThreshold

The threshold alarm value for Claim Tokens. Valid ranges are 1 to 7200 with a default value of 5.

tRingAlarmsRingLostFramesThreshold

The threshold alarm value for Lost Frames. Valid ranges are 5 to 7200 with a default value of 10.

tRingAlarmsRingBeaconStateThreshold

The threshold alarm value for Beacon States. Valid ranges are 1 to 7200 with a default value of 1.

tRingAlarmsRingFrameCountThreshold

The threshold alarm value for the total Frame Count. Valid ranges are 2430 to 250000 with a default values of 8920 for 4 Mbps and 33890 for 16 Mbps ring speeds.

tRingAlarmsStnEnblTable

A list of alarm enabling objects pertaining to the stations participating in the ring poll process on this ring.

tRingAlarmsStnEnblEntry

A list of alarm enabling objects pertaining to a station participating in the ring poll process on this ring.

tRingAlarmsStnEnblAddress

Returns the address of the station to which the information in this table pertains.

tRingAlarmsStnEnblLineErrsEnable

A write of value 2 will enable the Line Errors threshold alarm for this station. A write of value 1 will disable this threshold alarm (default).

tRingAlarmsStnEnblInternalErrsEnable

A write of value 2 will enable the Internal Errors threshold alarm for this station. A write of value 1 will disable this threshold alarm (default).

tRingAlarmsStnEnblBurstErrsEnable

A write of value 2 will enable the Burst Errors threshold alarm for this station. A write of value 1 will disable this threshold alarm (default).

tRingAlarmsStnEnblACErrsEnable

A write of value 2 will enable the Address Recognized/Frame Copied Errors threshold alarm for this station. A write of value 1 will disable this threshold alarm (default).

tRingAlarmsStnEnblRcvrCongestEnable

A write of value 2 will enable the Receiver Congestion threshold alarm for this station. A write of value 1 will disable this threshold alarm (default).

tRingAlarmsStnThrshTable

A list of threshold alarm objects pertaining to the stations participating in the ring poll process on this ring.

tRingAlarmsStnThrshEntry

A list of threshold alarm objects pertaining to a station participating in the ring poll process on this ring.

tRingAlarmsStnThrshAddress

Returns the address of the station to which the information in this table pertains.

tRingAlarmsStnThrshLineErrsThreshold

The threshold alarm value for Line Errors. Valid ranges are 1 to 3600 with a default value of 2.

tRingAlarmsStnThrshInternalErrsThreshold

The threshold alarm value for Internal Errors. Valid ranges are 1 to 3600 with a default value of 1.

tRingAlarmsStnThrshBurstErrsThreshold

The threshold alarm value for Burst Errors. Valid ranges are 5 to 18000 with a default value of 10.

tRingAlarmsStnThrshACErrsThreshold

The threshold alarm value for Address Recognized/Frame Copied Errors. Valid ranges are 1 to 1800 with a default value of 2.

tRingAlarmsStnThrshRcvrCongestThreshold

The threshold alarm value for Receiver Congestion Errors. Valid ranges are 1 to 90000 with a default value of 124.

tRingPortGrpTable

A list of port group management objects which pertains to a collection of port groups making up this ring.

tRingPortGrpEntry

A list of port group management objects which pertains to a single instance of a port group residing on this ring.

tRingPortGrpId

Returns an index to a port group for which the information in this table pertains.

tRingPortGrpName

An ASCII name assigned to this port group. The default name is Board n', where n is a number 1 through n.

tRingPortGrpStnPortCount

This object defines the total number of station ports on the addressed board.

tRingPortGrpRingPortCount

This object defines the total number of ring ports (ring-in or ring-out) on the addressed board.

tRingPortGrpStnPortsEnable

Setting this object to enable will cause all the station ports in this port group to be enabled. Setting this object to noEnable will have no effect on the station ports in this port group. When read this object will always return noEnable.

tRingPortGrpRingPortsEnable

Setting this object to enable will cause all the ring ports in this port group to be enabled. Setting this object to noEnable will have no effect on the ring ports in this port group. When read this object will always return noEnable.

tRingPortGrpStnPortsOn

Returns the total number of enabled station ports in this port group.

tRingPortGrpRingPortsOn

Returns the total number of enabled ring in/out ports in this port group.

tRingPortGrpMode

This object defines the mode of the board. In Auto Mode, the board is using its hardware defaults. The default values of the board are all ports enabled, speed selected by the HW jumper on the board, the FNB attempts to attach left and right and not bypa ...

tRingPortGrpSpeed

This object sets the speed of the board. On devices with a MAC interface this object is read-only, and will return NO SUCH NAME on write requests.

tRingPortGrpSpeedFault

This object reports a ring speed fault.

tRingPortGrpSpeedFaultLocation

This object indicates the last ring speed fault detection circuit(s) to detect the fault, if there was one.

tRingPortGrpBypassRingPortState

This object sets and reports the state of the ring bypass relay on those token ring boards which support the relay.

tRingPortMgmtTable

A list of port management objects which pertains to a collection of ports in a port group residing on this ring.

tRingPortMgmtEntry

A list of port management objects which pertains to a single instance of a port in a port group residing on this ring.

tRingPortMgmtPortId

Returns an index to a port for which the information in this table pertains.

tRingPortMgmtPortGrpId

Returns an index to a port group to which the port belongs for which the information in this table pertains.

tRingPortMgmtPortName

Gets/Sets an ASCII name for this port. The default name for this object is 'Board b, Port p', where b and p are integers 1 through n.

tRingPortMgmtPortAdminState

Setting this object to enable will cause the port to be enabled. Setting this object to disable will cause the ports to be disabled. When read this object will always return the state of the last request.

tRingPortMgmtPortOperState

Returns the operational state of this port.

tRingPortMgmtPortType

Uniquely defines the station or ring port type. An authoritative identification for a token ring station or ring port type. By convention, this value is allocated within the SMI enterprises subtree (1.3.6.1.4.1), and provides an easy and unambiguous mea ...

tRingPortMgmtSpeedFaultDetect

This object indicates whether a speed fault has been detected at this port. If the HW is incapable of detecting a speed fault at the port, the value notDetectable is returned.

tRingPortMgmtRingOutEnable

This object, when written, permits the port to function as either a ring out port or a station port, if available. If this selection is not supported by this port, then any write to this object will return a BADSETINFO error. When read, this object will ...

tRingPortStnTable

A list of station port management objects which pertains to a collection of station ports in a port group residing on this ring.

tRingPortStnEntry

A list of station port management objects which pertains to a single instance of a station port in a port group residing on this ring.

tRingPortStnPortId

Returns an index to a port for which the information in this table pertains.

tRingPortStnPortGrpId

Returns an index to a port group to which the port belongs for which the information in this table pertains.

tRingPortStnPortLinkState

This object reports the link status of a port. The link status indicates the port is detecting a good phantom current.

tRingPortStnPortLinkStateTime

This object reports the amount of time in TimeTicks since the port's link state last changed.

tRingPortStnPortMapEnable

A write of mappingEnabled to this object permits a station port to be associated, or mapped, to a station participating in the ring poll process on this ring. A write of mappingDisabled prevents this association from taking place. This object is intende ...

tRingPortStnPortMappedMacAddr

This object reports the MAC address of the station mapped to this port, if known. If unknown, the NULL address is returned.

tRingPortStnInsertionTrapEnable

A write of enabled to this object permits the port inserted and port deinserted traps to be sent when phantom current has been asserted or removed, respectively, on this station port. A write of disabled prevents the traps from being sent. The default s ...

tRingPortRingTable

A list of ring port management objects which pertains to a collection of ring ports in a port group residing on this ring.

tRingPortRingEntry

A list of ring port management objects which pertains to a single instance of a ring port in a port group residing on this ring.

tRingPortRingPortId

Returns an index to a port for which the information in this table pertains.

tRingPortRingPortGrpId

Returns an index to a port group to which the port belongs for which the information in this table pertains.

tRingPortRingPortClass

This object returns a code indicating whether the queried ring port is capable of either autowrapping or not, or whether the media type is selectable (implies autowrappability).

tRingPortRingPortMediaSelect

When written, this object allows for the selection of the media type for this ring port. If the ring port is not selectable and an attempt is made to change the media type, a BADSETINFO error will be returned. When read, this object will return the last ...

tRingPortRingFaultStatus

This object reports the media fault status of a ring port capable of auto-wrapping.

tRingPortRingFaultStateTime

This object reports the amount of time in TimeTicks since the ring port fault state last changed.

tRingPortRingPhantomCurrent

When written with the value activatePhantom, this object activates the board's phantom current for the ring port, if applicable. This may be different from the HW switch setting. When written with the value deactivatePhantom, the board removes phantom c ...

tRingPortRingPortType

This object reports the ring port type.

tRingIfIndex

A read of this object will return the MIB-II ifIndex to the interface this ring is attached to.