ibm-ibminterface Download

ibminterfaceClearTable

A table allowing interface counters to be cleared.

ibminterfaceClearEntry

Entry identifying a particular interface whose counters are to be cleared.

ibminterfaceClearInOctets

When SET to a value of clear(1), the counter of bytes received over this interface is reset. When READ, this object always returns a value of noaction(0), since this object is intended as a trigger, rather than providing information.

ibminterfaceClearInUcastPkts

When SET to a value of clear(1), the counter of unicast packets received over this interface is reset. When READ, this object always returns a value of noaction(0), since this object is intended as a trigger, rather than providing information.

ibminterfaceClearInMulticastPkts

When SET to a value of clear(1), the counter of multicast packets received over this interface is reset. When READ, this object always returns a value of noaction(0), since this object is intended as a trigger, rather than providing information.

ibminterfaceClearInErrors

When SET to a value of clear(1), the counters for all types of input errors are reset. When READ, this object always returns a value of noaction(0), since this object is intended as a trigger, rather than providing information.

ibminterfaceClearInAll

When SET to a value of clear(1), the counters for all input counters (byte, packet, error) are reset. When READ, this object always returns a value of noaction(0), since this object is intended as a trigger, rather than providing information.

ibminterfaceClearOutOctets

When SET to a value of clear(1), the counter of bytes sent over this interface is reset. When READ, this object always returns a value of noaction(0), since this object is intended as a trigger, rather than providing information.

ibminterfaceClearOutUcastPkts

When SET to a value of clear(1), the counter of unicast packets sent over this interface is reset. When READ, this object always returns a value of noaction(0), since this object is intended as a trigger, rather than providing information.

ibminterfaceClearOutMulticastPkts

When SET to a value of clear(1), the counter of multicast packets sent over this interface is reset. When READ, this object always returns a value of noaction(0), since this object is intended as a trigger, rather than providing information.

ibminterfaceClearOutErrors

When SET to a value of clear(1), the counters for all types of output errors are reset. When READ, this object always returns a value of noaction(0), since this object is intended as a trigger, rather than providing information.

ibminterfaceClearOutAll

When SET to a value of clear(1), the counters for all output counters (byte, packet, error) are reset. When READ, this object always returns a value of noaction(0), since this object is intended as a trigger, rather than providing information.

ibminterfaceClearMaintTest

When SET to a value of clear(1), the counters for self test pass, self test fail and maintenance fail are reset. When READ, this object always returns a value of noaction(0), since this object is intended as a trigger, rather than providing information.

ibminterfaceClearDeviceSpecific

When SET to a value of clear(1), all the device specific counters are reset. For example, for an Ethernet interface, all the counters provided in the dot3StatsTable are reset. When READ, this object always returns a value of noaction(0), since this object ...

ibminterfaceClearAll

When SET to a value of clear(1), all the reset actions performed by the MIB objects defined above are executed at once. This action has the same behavior as executing the CLEAR command from the T5 console prompt (+). When READ, this object always returns ...