MIBs list
- DELLBASEBOARDMIF-MIB
- This is the MIF for Dell Servers
- DELLLOCALRESPONSEAGENTMIF-MIB
- This is the MIF for the Dell automatic response agent
- DeltaUPS-MIB
- DES-1228p-MIB
- Each octet within this value specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16, etc. Within each octet, the most significant bit represents the lowest numbered port, and the least significant bit represents the highest numbered port. Thus, each port of the bridge is represented by a single bit within the value of this object. If that bit has a value of '1' then that port is included in the set of ports; the port is not included if its bit has a value of '0'.
- DES3010F-L2MGMT-MIB
- The Structure of Common Management Information for making a trunk and IGMP related function for D-Link devices.
- DES3010FL-L2MGMT-MIB
- The Structure of Common Management Information for making a trunk and IGMP related function for D-Link devices.
- DES3010G-L2MGMT-MIB
- The Structure of Common Management Information for making a trunk and IGMP related function for D-Link devices.
- DES3018-L2MGMT-MIB
- The Structure of Common Management Information for making a trunk and IGMP related function for D-Link devices.
- DES3026-L2MGMT-MIB
- The Structure of Common Management Information for making a trunk and IGMP related function for D-Link devices.
- DES3528-L2MGMT-MIB
- The Structure of Layer 2 Network Management Information.
- DES3528-SWL3MGMT-MIB
- The Structure of Layer 3 Network Management Information for the proprietary enterprise.
- DES3552-L2MGMT-MIB
- The Structure of Layer 2 Network Management Information.
- DES3552-SWL3MGMT-MIB
- The Structure of Layer 3 Network Management Information for the proprietary enterprise.
- DES3612-SWL3MGMT-MIB
- The Structure of Layer 3 Network Management Information for the proprietary enterprise.
- DES3627-SWL3MGMT-MIB
- The Structure of Layer 3 Network Management Information for the proprietary enterprise.
- DES3650-SWL3MGMT-MIB
- The Structure of Layer 3 Network Management Information for the proprietary enterprise.
- DES6500-SWL2MGMT-MIB
- The Structure of Layer 2 Network Management Information for the D-Link enterprise.
- DGS3200-L2MGMT-MIB
- The Structure of Layer 2 Network Management Information.
- DGS3612-L2MGMT-MIB
- DGS3627-L2MGMT-MIB
- The Structure of Layer 2 Network Management Information.
- DGS3650-L2MGMT-MIB
- The Structure of Layer 2 Network Management Information.
- DHCP-MIB
- This is the DHCP Managment Information Base module for Microsoft.
- DHCP-RELAY-MGMT-MIB
- The structure of DHCP relay management for the proprietary enterprise.
- DHCP-Server-MIB
- The structure of DHCP Server management for the proprietary enterprise.
- DHS3224-MIB
- The Structure of Layer 2 Network Management Information for the enterprise.
- DIAL-CONTROL-MIB
- The MIB module to describe peer information for demand access and possibly other kinds of interfaces.
- DIFFSERV-MIB
- This MIB defines the objects necessary to manage a device that uses the Differentiated Services Architecture described in RFC 2475. The Conceptual Model of a Differentiated Services Router provides supporting information on how such a router is modeled.
- DISMAN-EVENT-MIB
- The MIB module for defining event triggers and actions for network management purposes
- DISMAN-EXPRESSION-MIB
- DISMAN-SCHEDULE-MIB
- DISMAN-SCRIPT-MIB
- This MIB module defines a set of objects that allow to delegate management scripts to distributed managers.
- DLINK-AGENT-MIB
- The Structure of Common Management Information for the D-Link enterprise.
- DLINK-AUTH-MIB
- The Structure of Common Management Information for security functions for D-Link devices.
- DLINK-EQUIPMENT-MIB
- DLink equipments MIB
- DLINK-SYSLOG-MIB
- The Structure of System Log Information for the proprietary enterprise.
- DLINK-TIME-MIB
- DLink equipments absolute time.
- dlm-mib
- DLSW-MIB
- This MIB module contains objects to manage Data Link Switches.
- DOCS-BPI-MIB
- This is the MIB Module for the DOCSIS Baseline Privacy Interface (BPI) at cable modems (CMs) and cable modem termination systems (CMTSs). CableLabs requires the implementation of this MIB in DOCSIS 1.0 cable modems that implement the Baseline Privacy Interface, as a prerequisite for DOCSIS 1.0 certification.
- DOCS-BPI2-MIB
- This is the MIB Module for the DOCSIS Baseline Privacy Plus Interface (BPI+) at cable modems (CMs) and cable modem termination systems (CMTSs).
- DOCS-CABLE-DEVICE-MIB
- This is the MIB Module for DOCSIS-compliant cable modems and cable-modem termination systems.
- DOCS-CABLE-DEVICE-TRAP-MIB
- The CABLE DEVICE TRAP MIB is an extension of the CABLE DEVICE MIB defined in RFC2669. It defines various trap objects for both cable modem and cable modem termination systems. Two groups of SNMP notification objects are defined. One group is for notifying cable modem events and one group for notifying cable modem termination system events. Common to all CM notification objects (traps) is that their OBJECTS statements contain information about the event priority, the event Id, the event message body, the CM DOCSIS capability, the CM DOCSIS QOS level, the CM DOCSIS upstream modulation type, the cable interface MAC address of the cable modem and the cable card MAC address of the CMTS to which the modem is connectede.
- DOCS-DIAG-MIB
- This is the MIB Module for the Diagnostic Log for DOCSIS-compliant Cable Modem Termination Systems (CMTS). The purpose of the Diagnostic Log is to prevent service interruptions by early detection of potential problems. It can also be used for fault management and for troubleshooting the cable network. The Diagnostic Log contains Cable Modems that show certain potential problematic behaviors, as determined by the CMTS. These detection criteria are defined as diagnostictriggers. The diagnostic trigger is an information filter to avoid inundating a management agent with data which is less meaningful as a function of size.
- DOCS-DRF-MIB
- This MIB module contains the management objects for the management of the Downstream RF Interface specification.
- DOCS-IETF-BPI2-MIB
- This is the MIB module for the DOCSIS Baseline Privacy Plus Interface (BPI+) at cable modems (CMs) and cable modem termination systems (CMTSs).
- DOCS-IETF-QOS-MIB
- This is the management information for Quality Of Service (QOS) for DOCSIS 1.1 and 2.0.
- DOCS-IF-MIB
- This is the MIB Module for DOCSIS 2.0-compliant Radio Frequency (RF) interfaces in Cable Modems and Cable Modem Termination Systems.
- DOCS-L2VPN-MIB
- This is the management MIB for devices complying to the DOCSIS L2VPN Feature.
- DOCS-LOADBAL3-MIB
- This MIB module contains the management objects for the DOCSIS 3.0 CMTS Load Balanding operation. Copyright 1999-2006 Cable Television Laboratories, Inc. All rights reserved.
- DOCS-LOADBALANCING-MIB
- This is the MIB Module for the load balancing. Load balancing is manageable on a per-CM basis.
- DOCS-MCAST-AUTH-MIB
- This MIB module contains the management objects for the management of the CMTS Multicast Authorization Module.
- DOCS-MCAST-MIB
- This MIB module contains the management objects for the management of Multicast over DOCSIS to support Multicast DSID forwarding and or bonded multicast.
- DOCS-QOS-MIB
- This is the management information for Quality Of Service (QOS) for DOCSIS 1.1.
- DOCS-SEC-MIB
- This MIB module contains the management objects for the management of the security requirements in the DOCSIS Security Specification.
- DOCS-SUBMGT3-MIB
- This MIB module contains the management objects for the CMTS control of the IP4 and IPv6 traffic with origin and destination to CMs and/or CPEs behind the CM.
- DOT12-IF-MIB
- This MIB module describes objects for managing IEEE 802.12 interfaces.
- DOT12-RPTR-MIB
- Dot1xMGMT-MIB
- The Structure of 802.1x guest VLAN for the proprietary enterprise.
- dot5-log-mib
- dot5-phys-mib
- Double-VLAN-MIB
- DRAFT-MSDP-MIB
- An experimental MIB module for MSDP Management.
- DS1-MIB
- The MIB module to describe DS1, E1, DS2, and E2 interfaces objects.
- DS3-MIB
- The is the MIB module that describes DS3 and E3 interfaces objects.
- DSG-IF-MIB
- This is the MIB Module for the DOCSIS Set-top Gateway (DSG). The DSG provides a one-way IP datagram transport for Out-Of-Band (OOB) messaging to cable set-top clients. The one-way IP datagram transport is called a DSG Tunnel. A DSG Tunnel carrying either a broadcast, unicast or multicast IP datagram stream originating at the DOCSIS Set-top Gateway and carrying Out-Of-Band messages intended for set-top clients. It is carried over one or more downstream DOCSIS channels. Multiple DSG tunnels may exist on a single downstream DOCSIS channel.
- DTI-MIB
- This MIB module provides the management objects necessary to configure and manage the DOCSIS Timing Interface devices.
- DULD-MIB
- The unidirectioanl link detection module MIB for the proprietary enterprise.
- DVMRP-MIB
- The MIB module for management of DVMRP routers."
- DVMRP-PRIVATE-MIB
- Cajun DVMRP PRIVATE MIB