-- *------------------------------------------------------------------ -- * ALTIGA-GENERAL-STATS-MIB.my: Altiga General Statistics MIB. -- * -- * Altiga Networks was acquired by Cisco Systems on March 29, 2000 -- * -- * Copyright (c) 2002 by Cisco Systems, Inc. -- * All rights reserved. -- * -- *------------------------------------------------------------------ ALTIGA-GENERAL-STATS-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, Gauge32, Counter32, Integer32 FROM SNMPv2-SMI MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP FROM SNMPv2-CONF alStatsGeneral, alGeneralGroup FROM ALTIGA-MIB alGeneralMibModule FROM ALTIGA-GLOBAL-REG; altigaGeneralStatsMibModule MODULE-IDENTITY LAST-UPDATED "200209111300Z" ORGANIZATION "Cisco Systems, Inc." CONTACT-INFO "Cisco Systems 170 W Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553-NETS E-mail: cs-cvpn3000@cisco.com" DESCRIPTION "The Altiga General Statistics MIB models counters and objects that are of management interest. Acronyms The following acronyms are used in this document: AVP: Attribute/Value Pair CLID: Calling Line ID DNIS: Dialed Number Identification Service L2TP: Layer 2 Tunnel Protocol LAC: L2TP Access Concentrator LNS: L2TP Network Server RWS: Receive Window Size " REVISION "200209111300Z" DESCRIPTION "Added module compliance and fix comments." REVISION "200207100000Z" DESCRIPTION "Updated with new header" ::= { alGeneralMibModule 2 } -- +++++++++++++++++++++++++++++++++++++++++++++++++++++++ -- MIB Objects -- +++++++++++++++++++++++++++++++++++++++++++++++++++++++ alStatsGeneralGlobal OBJECT IDENTIFIER ::= { alStatsGeneral 1 } alGeneralTime OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The current time on the box, represented as a time_t. In 1.2, this was the box's local time. After 1.2, it was corrected to represent UTC (which is what it is supposed to be). So all boxes should have this be the same value +/- a few seconds." ::= { alStatsGeneralGlobal 1 } alGeneralGaugeCpuUtil OBJECT-TYPE SYNTAX Gauge32 (0..100) MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the CPU Utilization gauge which indicates percentage of CPU utilized." ::= { alStatsGeneralGlobal 2 } alGeneralGaugeActiveSessions OBJECT-TYPE SYNTAX Gauge32 (0..100) MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the Active Sessions gauge which indicates the percentage of total permitted session that are active." ::= { alStatsGeneralGlobal 3 } alGeneralGaugeThroughput OBJECT-TYPE SYNTAX Gauge32 (0..100) MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the Throughput gauge which indicates the percentage of total available throughput in-use." ::= { alStatsGeneralGlobal 4 } alGeneralTimeZone OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The time zone configured on the box. Measured in minutes from UTC. e.g. EST = -300." ::= { alStatsGeneralGlobal 5 } altigaGeneralStatsMibConformance OBJECT IDENTIFIER ::= { altigaGeneralStatsMibModule 1 } altigaGeneralStatsMibCompliances OBJECT IDENTIFIER ::= { altigaGeneralStatsMibConformance 1 } altigaGeneralStatsMibCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for agents which implement the Altiga General Statistics MIB." MODULE MANDATORY-GROUPS { altigaGeneralStatsGroup } ::= { altigaGeneralStatsMibCompliances 1 } altigaGeneralStatsGroup OBJECT-GROUP OBJECTS { alGeneralTime, alGeneralGaugeCpuUtil, alGeneralGaugeActiveSessions, alGeneralGaugeThroughput, alGeneralTimeZone } STATUS current DESCRIPTION "The objects for general information." ::= { alGeneralGroup 2 } END