-- ============================================================================
-- AT-ETH.MIB, Allied Telesis enterprise MIB: DS3 module
--
-- Extracted from ATROUTER.MIB of pre 2.9.1 release
--
-- June 2006, Stan Xiang
--
-- Copyright (c) 2006 by Allied Telesis, Inc.
-- All rights reserved.
-- 
-- ============================================================================

AT-DS3-MIB DEFINITIONS ::= BEGIN

IMPORTS
    MODULE-IDENTITY, 
    OBJECT-TYPE, 
    NOTIFICATION-TYPE
    	FROM SNMPv2-SMI

    DisplayString,
    TruthValue
        FROM SNMPv2-TC

	ifIndex
		FROM IF-MIB

	modules,
	DisplayStringUnsized
		FROM AT-SMI-MIB
;
                                 
ds3	MODULE-IDENTITY
	    LAST-UPDATED "200606281222Z"
    	ORGANIZATION "Allied Telesis, Inc"
		CONTACT-INFO
		    "http://www.alliedtelesis.com"
		DESCRIPTION
		    "This MIB file contains definitions of managed objects for the
	    	DS3 module. "

	    REVISION "200606281222Z"
		DESCRIPTION
			"Initial Revision"

::= { modules 109 }
									  

ds3TrapTable OBJECT-TYPE
	SYNTAX     SEQUENCE OF Ds3TrapEntry
	MAX-ACCESS not-accessible
	STATUS     current
	DESCRIPTION
		"The ATR enterprise DS3 trap table."
		::= { ds3 1 }

ds3TrapEntry OBJECT-TYPE
	SYNTAX     Ds3TrapEntry
	MAX-ACCESS not-accessible
	STATUS     current
	DESCRIPTION
		"An entry in the ATR enterprise DS3 trap table."
	INDEX { ifIndex }
		::= { ds3TrapTable 1 }

Ds3TrapEntry ::=
	SEQUENCE {
		ds3TcaTrapEnable		INTEGER,
		ds3TrapError			INTEGER,
		ds3TrapLoc				INTEGER,
		ds3TrapInterval			INTEGER
	}

ds3TcaTrapEnable  OBJECT-TYPE
	SYNTAX     INTEGER {
				enabled (1),
				disabled (2)
			}
	MAX-ACCESS  read-write
	STATUS      current
	DESCRIPTION
	        "Indicates whether the threshold crossing alert traps
			 should be generated for this interface."
	DEFVAL { disabled }
	::= { ds3TrapEntry 1 }

-- All ATR specific DS3 traps

ds3TrapError OBJECT-TYPE
    SYNTAX      INTEGER {ds3NoError (1), ds3PES (2), ds3PSES (3), ds3SEFs (4), ds3UAS (5),
	                 ds3LCVs (6), ds3PCVs (7), ds3LESs (8), ds3CCVs (9),
					 ds3CESs (10), ds3CSESs (11)
			        }
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
            "This variable shows which kind of parameter or primitive caused 
            the trap. This variable is really just a placeholder for the 
            object sent in the DS3 TRAP, but can be read independently if 
            required. The variable will hold the value at the latest trap.
            A value of ds3NoError shows no trap has occured"
	DEFVAL { ds3NoError }
    ::= { ds3TrapEntry 2 }


	ds3TrapLoc OBJECT-TYPE
		SYNTAX      INTEGER {ds3NoLoc (1), ds3Near (2), ds3Far (3) }
 MAX-ACCESS  read-only
 STATUS      current
 DESCRIPTION
            "This variable shows whether the trap was caused by a problem at the local or 
            remote end. This variable is really just a placeholder for the 
            object sent in the DS3 TRAP, but can be read independently if 
            required. The variable will hold the value at the latest trap.
            A value of ds3NoLoc shows no trap had occured."
	DEFVAL { ds3NoLoc }
 ::= { ds3TrapEntry 3 }


ds3TrapInterval OBJECT-TYPE
 SYNTAX     INTEGER {ds3NoInt (1), ds3Fifteen (2), ds3Twentyfour (3) }
 MAX-ACCESS  read-only
 STATUS      current
 DESCRIPTION
            "This variable shows whether the counter which has crossed the
             threshold is a twenty four hour or fifteen minute counter. 
             This variable is really just a placeholder for the 
             object sent in the DS3 TRAP, but can be read independently if 
             required. The variable will hold the value at the latest trap.
             A value of ds3NoInt shows no trap has occured."
 DEFVAL { ds3NoInt }
 ::= { ds3TrapEntry 4 }


ds3Traps	OBJECT IDENTIFIER ::= { ds3 0 }
tcaTrap 	NOTIFICATION-TYPE
    OBJECTS		{ ds3TrapError, ds3TrapLoc, ds3TrapInterval }
	STATUS		current
    DESCRIPTION
                "A DS3 trap is generated when a threshold crossing alert 
                 occurs. This happens when an error count exceeds a pre 
                 determined value. The values are counted over 15 minute and 
                 24 hour periods. Once a trap has occured in a given period 
                 it may not occur again within the same period."
    ::= { ds3Traps 1 }

END