FR-MFR-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, Integer32, Counter32, NOTIFICATION-TYPE, transmission FROM SNMPv2-SMI TEXTUAL-CONVENTION, TestAndIncr, RowStatus FROM SNMPv2-TC MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP FROM SNMPv2-CONF SnmpAdminString FROM SNMP-FRAMEWORK-MIB InterfaceIndex, ifIndex FROM IF-MIB; mfrMib MODULE-IDENTITY LAST-UPDATED "200011300000Z" ORGANIZATION "IETF Frame Relay Service MIB (frnetmib) Working Group" CONTACT-INFO "WG Charter: http://www.ietf.org/html.charters/frnetmib-charter.html WG-email: frnetmib@sunroof.eng.sun.com Subscribe: frnetmib-request@sunroof.eng.sun.com Email Archive: ftp://ftp.ietf.org/ietf-mail-archive/frnetmib Chair: Andy Malis Vivace Networks Email: Andy.Malis@vivacenetworks.com WG editor: Prayson Pate Overture Networks Email: prayson.pate@overturenetworks.com Co-author: Bob Lynch Overture Networks EMail: bob.lynch@overturenetworks.com Co-author: Kenneth Rehbehn Megisto Systems, Inc. EMail: krehbehn@megisto.com" DESCRIPTION "This is the MIB used to control and monitor the multilink frame relay (MFR) function described in FRF.16." -- --------------------------------------------------------- -- --------------------------------------------------------- -- Revision History -- --------------------------------------------------------- -- --------------------------------------------------------- REVISION "200011300000Z" DESCRIPTION "Published as RFC 3020." ::= { transmission 47 } -- --------------------------------------------------------- -- --------------------------------------------------------- -- Textual Conventions -- --------------------------------------------------------- -- --------------------------------------------------------- MfrBundleLinkState ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The possible states for a bundle link, as defined in Annex A of FRF.16." REFERENCE "FRF.16 Annex A" SYNTAX INTEGER { mfrBundleLinkStateAddSent (1), mfrBundleLinkStateAddRx (2), mfrBundleLinkStateAddAckRx (3), mfrBundleLinkStateUp (4), mfrBundleLinkStateIdlePending (5), mfrBundleLinkStateIdle (6), mfrBundleLinkStateDown (7), mfrBundleLinkStateDownIdle (8) } -- --------------------------------------------------------- -- --------------------------------------------------------- -- Object Identifiers -- --------------------------------------------------------- -- --------------------------------------------------------- mfrMibScalarObjects OBJECT IDENTIFIER ::= { mfrMib 1 } mfrMibBundleObjects OBJECT IDENTIFIER ::= { mfrMib 2 } mfrMibBundleLinkObjects OBJECT IDENTIFIER ::= { mfrMib 3 } mfrMibTraps OBJECT IDENTIFIER ::= { mfrMib 4 } mfrMibConformance OBJECT IDENTIFIER ::= { mfrMib 5 } mfrMibTrapsPrefix OBJECT IDENTIFIER ::= { mfrMibTraps 0 } mfrMibGroups OBJECT IDENTIFIER ::= { mfrMibConformance 1 } mfrMibCompliances OBJECT IDENTIFIER ::= { mfrMibConformance 2 } -- --------------------------------------------------------- -- --------------------------------------------------------- -- Scalars -- --------------------------------------------------------- -- --------------------------------------------------------- mfrBundleMaxNumBundles OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object is used to inform the manager of the maximum number of bundles supported by this device." ::= { mfrMibScalarObjects 1 } mfrBundleNextIndex OBJECT-TYPE SYNTAX TestAndIncr MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used to assist the manager in selecting a value for mfrBundleIndex during row creation in the mfrBundleTable. It can also be used to avoid race conditions with multiple managers trying to create rows in the table (see RFC 2494 [RFC2494] for one such alogrithm)." REFERENCE "RFC 2494" ::= { mfrMibScalarObjects 2 } -- --------------------------------------------------------- -- --------------------------------------------------------- -- Bundle Table -- --------------------------------------------------------- -- --------------------------------------------------------- mfrBundleTable OBJECT-TYPE SYNTAX SEQUENCE OF MfrBundleEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The bundle configuration and status table. There is a one-to-one correspondence between a bundle and an interface represented in the ifTable. The following objects of the ifTable have specific meaning for an MFR bundle: ifAdminStatus - the bundle admin status ifOperStatus - the bundle operational status ifSpeed - the current bandwidth of the bundle ifInUcastPkts - the number of frames received on the bundle ifOutUcastPkts - the number of frames transmitted on the bundle ifInErrors - frame (not fragment) errors ifOutErrors - frame (not fragment) errors " ::= { mfrMibBundleObjects 3 } mfrBundleEntry OBJECT-TYPE SYNTAX MfrBundleEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the bundle table." INDEX { mfrBundleIndex } ::= { mfrBundleTable 1 } MfrBundleEntry ::= SEQUENCE { mfrBundleIndex Integer32, mfrBundleIfIndex InterfaceIndex, mfrBundleRowStatus RowStatus, mfrBundleNearEndName SnmpAdminString, mfrBundleFragmentation INTEGER, mfrBundleMaxFragSize Integer32, mfrBundleTimerHello INTEGER, mfrBundleTimerAck INTEGER, mfrBundleCountMaxRetry INTEGER, mfrBundleActivationClass INTEGER, mfrBundleThreshold Integer32, mfrBundleMaxDiffDelay Integer32, mfrBundleSeqNumSize INTEGER, mfrBundleMaxBundleLinks Integer32, mfrBundleLinksConfigured Integer32, mfrBundleLinksActive Integer32, mfrBundleBandwidth Integer32, mfrBundleFarEndName SnmpAdminString, mfrBundleResequencingErrors Counter32 } mfrBundleIndex OBJECT-TYPE SYNTAX Integer32 (1..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index into the table. While this corresponds to an entry in the ifTable, the value of mfrBundleIndex need not match that of the ifIndex in the ifTable. A manager can use mfrBundleNextIndex to select a unique mfrBundleIndex for creating a new row." ::= { mfrBundleEntry 1 } mfrBundleIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-only STATUS current DESCRIPTION "The value must match an entry in the interface table whose ifType must be set to frf16MfrBundle(163). For example: if the value of mfrBundleIfIndex is 10, then a corresponding entry should be present in the ifTable with an index of 10 and an ifType of 163." ::= { mfrBundleEntry 2 } mfrBundleRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The mfrBundleRowStatus object allows create, change, and delete operations on bundle entries." REFERENCE "RFC 1903" ::= { mfrBundleEntry 3 } mfrBundleNearEndName OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-create STATUS current DESCRIPTION "The configured name of the bundle." REFERENCE "FRF.16 section 3.4.1" ::= { mfrBundleEntry 4 } mfrBundleFragmentation OBJECT-TYPE SYNTAX INTEGER { enable (1), disable (2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Controls whether the bundle performs/accepts fragmentation and re-assembly. The possible values are: enable(1) - Bundle links will fragment frames disable(2) - Bundle links will not fragment frames." DEFVAL { disable } ::= { mfrBundleEntry 5 } mfrBundleMaxFragSize OBJECT-TYPE SYNTAX Integer32 (-1..8184) UNITS "Octets" MAX-ACCESS read-create STATUS current DESCRIPTION "The maximum fragment size supported. Note that this is only valid if mfrBundleFragmentation is set to enable(1). Zero is not a valid fragment size. A bundle that does not support fragmentation must return this object with a value of -1." DEFVAL { -1 } ::= { mfrBundleEntry 6 } mfrBundleTimerHello OBJECT-TYPE SYNTAX INTEGER (1..180) UNITS "Seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The configured MFR Hello Timer value." REFERENCE "FRF.16 section 4.3.8.1" DEFVAL { 10 } ::= { mfrBundleEntry 7 } mfrBundleTimerAck OBJECT-TYPE SYNTAX INTEGER (1..10) UNITS "Seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The configured MFR T_ACK value." REFERENCE "FRF.16 section 4.3.8.2" DEFVAL { 4 } ::= { mfrBundleEntry 8 } mfrBundleCountMaxRetry OBJECT-TYPE SYNTAX INTEGER (1..5) MAX-ACCESS read-create STATUS current DESCRIPTION "The MFR N_MAX_RETRY value." REFERENCE "FRF.16 section 4.3.8.3" DEFVAL { 2 } ::= { mfrBundleEntry 9 } mfrBundleActivationClass OBJECT-TYPE SYNTAX INTEGER { mfrBundleActivationClassA (1), mfrBundleActivationClassB (2), mfrBundleActivationClassC (3), mfrBundleActivationClassD (4) } MAX-ACCESS read-create STATUS current DESCRIPTION "Controls the conditions under which the bundle is activated. The following settings are available: mfrBundleActivationClassA(1) - at least one must link up mfrBundleActivationClassB(2) - all links must be up mfrBundleActivationClassC(3) - a certain number must be up. Refer to mfrBundleThreshold for the required number. mfrBundleActivationClassD(4) - custom (implementation specific)." REFERENCE "FRF.16 section 4.2.2.1" DEFVAL { mfrBundleActivationClassA } ::= { mfrBundleEntry 10 } mfrBundleThreshold OBJECT-TYPE SYNTAX Integer32 (-1..2147483647) UNITS "Bundle Links" MAX-ACCESS read-create STATUS current DESCRIPTION "Specifies the number of links that must be in operational 'up' state before the bundle will transition to an operational up/active state. If the number of operational 'up' links falls below this value, then the bundle will transition to an inactive state. Note - this is only valid when mfrBundleActivationClass is set to mfrBundleActivationClassC or, depending upon the implementation, to mfrBundleActivationClassD. A bundle that is not set to one of these must return this object with a value of -1." REFERENCE "FRF.16 section 4.2.2.1" DEFVAL { -1 } ::= { mfrBundleEntry 11 } mfrBundleMaxDiffDelay OBJECT-TYPE SYNTAX Integer32 (-1..2147483647) UNITS "Milliseconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The maximum delay difference between the bundle links. A value of -1 indicates that this object does not contain a valid value" DEFVAL { -1 } ::= { mfrBundleEntry 12 } mfrBundleSeqNumSize OBJECT-TYPE SYNTAX INTEGER { seqNumSize12bit (1), seqNumSize24bit (2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Controls whether the standard FRF.12 12-bit sequence number is used or the optional 24-bit sequence number." REFERENCE "FRFTC/99-194" DEFVAL { seqNumSize12bit } ::= { mfrBundleEntry 13 } mfrBundleMaxBundleLinks OBJECT-TYPE SYNTAX Integer32 (1..2147483647) UNITS "Bundle Links" MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum number of bundle links supported for this bundle." ::= { mfrBundleEntry 14 } mfrBundleLinksConfigured OBJECT-TYPE SYNTAX Integer32 (1..2147483647) UNITS "Bundle Links" MAX-ACCESS read-only STATUS current DESCRIPTION "The number of links configured for the bundle." ::= { mfrBundleEntry 15 } mfrBundleLinksActive OBJECT-TYPE SYNTAX Integer32 (-1..2147483647) UNITS "Bundle Links" MAX-ACCESS read-only STATUS current DESCRIPTION "The number of links that are active." ::= { mfrBundleEntry 16 } mfrBundleBandwidth OBJECT-TYPE SYNTAX Integer32 UNITS "Bits/Sec" MAX-ACCESS read-only STATUS current DESCRIPTION "The amount of available bandwidth on the bundle" ::= { mfrBundleEntry 17 } mfrBundleFarEndName OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "Name of the bundle received from the far end." REFERENCE "FRF.16 section 3.4.1" ::= { mfrBundleEntry 18 } mfrBundleResequencingErrors OBJECT-TYPE SYNTAX Counter32 UNITS "Error Events" MAX-ACCESS read-only STATUS current DESCRIPTION "A count of the number of resequencing errors. Each event may correspond to multiple lost frames. Example: Say sequence number 56, 59 and 60 is received for DLCI 100. It is decided by some means that sequence 57 and 58 is lost. This counter should then be incremented by ONE, even though two frames were lost." ::= { mfrBundleEntry 19 } -- --------------------------------------------------------- -- --------------------------------------------------------- -- ifIndex Mapping to Bundle Index Table -- --------------------------------------------------------- -- --------------------------------------------------------- mfrBundleIfIndexMappingTable OBJECT-TYPE SYNTAX SEQUENCE OF MfrBundleIfIndexMappingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table mapping the values of ifIndex to the mfrBundleIndex. This is required in order to find the mfrBundleIndex given an ifIndex. The mapping of mfrBundleIndex to ifIndex is provided by the mfrBundleIfIndex entry in the mfrBundleTable." ::= { mfrMibBundleObjects 4 } mfrBundleIfIndexMappingEntry OBJECT-TYPE SYNTAX MfrBundleIfIndexMappingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row describes one ifIndex to mfrBundleIndex mapping." INDEX { ifIndex } ::= { mfrBundleIfIndexMappingTable 1 } MfrBundleIfIndexMappingEntry ::= SEQUENCE { mfrBundleIfIndexMappingIndex Integer32 } mfrBundleIfIndexMappingIndex OBJECT-TYPE SYNTAX Integer32 (1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "The mfrBundleIndex of the given ifIndex." ::= { mfrBundleIfIndexMappingEntry 2 } -- --------------------------------------------------------- -- --------------------------------------------------------- -- Bundle Link Table -- --------------------------------------------------------- -- --------------------------------------------------------- mfrBundleLinkTable OBJECT-TYPE SYNTAX SEQUENCE OF MfrBundleLinkEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The bundle link configuration and status table. There is a one-to-one correspondence between a bundle link and a physical interface represented in the ifTable. The ifIndex of the physical interface is used to index the bundle link table, and to create rows. The following objects of the ifTable have specific meaning for an MFR bundle link: ifAdminStatus - the bundle link admin status ifOperStatus - the bundle link operational status ifSpeed - the bandwidth of the bundle link interface ifInUcastPkts - the number of frames received on the bundle link ifOutUcastPkts - the number of frames transmitted on the bundle link ifInErrors - frame and fragment errors ifOutErrors - frame and fragment errors" ::= { mfrMibBundleLinkObjects 1 } mfrBundleLinkEntry OBJECT-TYPE SYNTAX MfrBundleLinkEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the bundle link table." INDEX { ifIndex } ::= { mfrBundleLinkTable 1 } MfrBundleLinkEntry ::= SEQUENCE { mfrBundleLinkRowStatus RowStatus, mfrBundleLinkConfigBundleIndex Integer32, mfrBundleLinkNearEndName SnmpAdminString, mfrBundleLinkState MfrBundleLinkState, mfrBundleLinkFarEndName SnmpAdminString, mfrBundleLinkFarEndBundleName SnmpAdminString, mfrBundleLinkDelay Integer32, mfrBundleLinkFramesControlTx Counter32, mfrBundleLinkFramesControlRx Counter32, mfrBundleLinkFramesControlInvalid Counter32, mfrBundleLinkTimerExpiredCount Counter32, mfrBundleLinkLoopbackSuspected Counter32, mfrBundleLinkUnexpectedSequence Counter32, mfrBundleLinkMismatch Counter32 } mfrBundleLinkRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The mfrBundleLinkRowStatus object allows create, change, and delete operations on mfrBundleLink entries. The create operation must fail if no physical interface is associated with the bundle link." ::= { mfrBundleLinkEntry 1 } mfrBundleLinkConfigBundleIndex OBJECT-TYPE SYNTAX Integer32 (1..2147483647) MAX-ACCESS read-create STATUS current DESCRIPTION "The mfrBundleLinkConfigBundleIndex object allows the manager to control the bundle to which the bundle link is assigned. If no value were in this field, then the bundle would remain in NOT_READY rowStatus and be unable to go to active. With an appropriate mfrBundleIndex in this field, then we could put the mfrBundleLink row in NOT_IN_SERVICE or ACTIVE rowStatus." ::= { mfrBundleLinkEntry 2 } mfrBundleLinkNearEndName OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-create STATUS current DESCRIPTION "The configured bundle link name that is sent to the far end." ::= { mfrBundleLinkEntry 3 } mfrBundleLinkState OBJECT-TYPE SYNTAX MfrBundleLinkState MAX-ACCESS read-only STATUS current DESCRIPTION "Current bundle link state as defined by the MFR protocol described in Annex A of FRF.16." REFERENCE "FRF.16 Annex A" ::= { mfrBundleLinkEntry 4 } mfrBundleLinkFarEndName OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "Name of bundle link received from far end." REFERENCE "FRF.16 section 3.4.2" ::= { mfrBundleLinkEntry 5 } mfrBundleLinkFarEndBundleName OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "Name of far end bundle for this link received from far end." REFERENCE "FRF.16 section 3.4.1" ::= { mfrBundleLinkEntry 6 } mfrBundleLinkDelay OBJECT-TYPE SYNTAX Integer32 (-1..2147483647) UNITS "Milliseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Current round-trip delay for this bundle link. The value -1 is returned when an implementation does not support measurement of the bundle link delay." REFERENCE "FRF.16 section 3.4.4" ::= { mfrBundleLinkEntry 7 } mfrBundleLinkFramesControlTx OBJECT-TYPE SYNTAX Counter32 UNITS "Frames" MAX-ACCESS read-only STATUS current DESCRIPTION "Number of MFR control frames sent." REFERENCE "FRF.16 section 3.2" ::= { mfrBundleLinkEntry 8 } mfrBundleLinkFramesControlRx OBJECT-TYPE SYNTAX Counter32 UNITS "Frames" MAX-ACCESS read-only STATUS current DESCRIPTION "Number of valid MFR control frames received." REFERENCE "FRF.16 section 3.2" ::= { mfrBundleLinkEntry 9 } mfrBundleLinkFramesControlInvalid OBJECT-TYPE SYNTAX Counter32 UNITS "Frames" MAX-ACCESS read-only STATUS current DESCRIPTION "The number of invalid MFR control frames received." REFERENCE "FRF.16 section 3.2" ::= { mfrBundleLinkEntry 10 } mfrBundleLinkTimerExpiredCount OBJECT-TYPE SYNTAX Counter32 UNITS "Timer Expiration Events" MAX-ACCESS read-only STATUS current DESCRIPTION "Number of times the T_HELLO or T_ACK timers expired." REFERENCE "FRF.16 section 4.3.8.1 and 4.3.8.2" ::= { mfrBundleLinkEntry 11 } mfrBundleLinkLoopbackSuspected OBJECT-TYPE SYNTAX Counter32 UNITS "Loopback Suspected Events" MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times a loopback has been suspected (based upon the use of magic numbers)." REFERENCE "FRF.16 section 4.3.7" ::= { mfrBundleLinkEntry 12 } mfrBundleLinkUnexpectedSequence OBJECT-TYPE SYNTAX Counter32 UNITS "Frames" MAX-ACCESS read-only STATUS current DESCRIPTION "The number of data MFR frames discarded because the sequence number of the frame for a DLCI was less than (delayed frame) or equal to (duplicate frame) the one expected for that DLCI. Example: Say frames with sequence numbers 56, 58, 59 is received for DLCI 100. While waiting for sequence number 57 another frame with sequence number 58 arrives. Frame 58 is discarded and the counter is incremented." REFERENCE "FRF.16 section 4.2.3.2" ::= { mfrBundleLinkEntry 13 } mfrBundleLinkMismatch OBJECT-TYPE SYNTAX Counter32 UNITS "Bundle Name Mismatch Events" MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times that the unit has been notified by the remote peer that the bundle name is inconsistent with other bundle links attached to the far-end bundle." REFERENCE "FRF.16 section 4.3.2.4" ::= { mfrBundleLinkEntry 14 } -- --------------------------------------------------------- -- --------------------------------------------------------- -- Notifications/Traps -- --------------------------------------------------------- -- --------------------------------------------------------- mfrMibTrapBundleLinkMismatch NOTIFICATION-TYPE OBJECTS { mfrBundleNearEndName, mfrBundleFarEndName, mfrBundleLinkNearEndName, mfrBundleLinkFarEndName, mfrBundleLinkFarEndBundleName } STATUS current DESCRIPTION "This trap indicates that a bundle link mismatch has been detected. The following objects are reported: mfrBundleNearEndName: configured name of near end bundle mfrBundleFarEndName: previously reported name of far end bundle mfrBundleLinkNearEndName: configured name of near end bundle mfrBundleLinkFarEndName: reported name of far end bundle mfrBundleLinkFarEndBundleName: currently reported name of far end bundle Note: that the configured items may have been configured automatically. Note: The mfrBundleLinkMismatch counter is incremented when the trap is sent." REFERENCE "FRF.16 section 4.3.2.4" ::= { mfrMibTrapsPrefix 1 } -- --------------------------------------------------------- -- --------------------------------------------------------- -- Conformance/Compliance -- --------------------------------------------------------- -- --------------------------------------------------------- mfrMibCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for equipment that implements the FRF16 MIB. All of the current groups are mandatory, but a number of objects may be read-only if the implementation does not allow configuration." MODULE -- this module MANDATORY-GROUPS { mfrMibBundleGroup, mfrMibBundleLinkGroup, mfrMibTrapGroup } OBJECT mfrBundleFragmentation MIN-ACCESS read-only DESCRIPTION "Write access is not required, but the value used must be reported." OBJECT mfrBundleMaxFragSize MIN-ACCESS read-only DESCRIPTION "Write access is not required, but the value used must be reported. A value of -1 indicates that the value is not applicable." OBJECT mfrBundleThreshold MIN-ACCESS read-only DESCRIPTION "Write access is not required, but the value used must be reported. A value of -1 indicates that the value is not applicable." OBJECT mfrBundleMaxDiffDelay MIN-ACCESS read-only DESCRIPTION "Write access is not required, but the value used must be reported." OBJECT mfrBundleSeqNumSize MIN-ACCESS read-only DESCRIPTION "Write access is not required, but the value used must be reported. A value of -1 indicates that the value is not applicable." ::= { mfrMibCompliances 1 } -- --------------------------------------------------------- -- --------------------------------------------------------- -- Units of Conformance -- --------------------------------------------------------- -- --------------------------------------------------------- mfrMibBundleGroup OBJECT-GROUP OBJECTS { mfrBundleMaxNumBundles, mfrBundleNextIndex, mfrBundleIfIndex, mfrBundleRowStatus, mfrBundleNearEndName, mfrBundleFragmentation, mfrBundleMaxFragSize, mfrBundleTimerHello, mfrBundleTimerAck, mfrBundleCountMaxRetry, mfrBundleActivationClass, mfrBundleThreshold, mfrBundleMaxDiffDelay, mfrBundleMaxBundleLinks, mfrBundleLinksConfigured, mfrBundleLinksActive, mfrBundleBandwidth, mfrBundleSeqNumSize, mfrBundleFarEndName, mfrBundleResequencingErrors, mfrBundleIfIndexMappingIndex } STATUS current DESCRIPTION "Group of objects describing bundles." ::= { mfrMibGroups 1 } mfrMibBundleLinkGroup OBJECT-GROUP OBJECTS { mfrBundleLinkRowStatus, mfrBundleLinkConfigBundleIndex, mfrBundleLinkNearEndName, mfrBundleLinkState, mfrBundleLinkFarEndName, mfrBundleLinkFarEndBundleName, mfrBundleLinkDelay, mfrBundleLinkFramesControlTx, mfrBundleLinkFramesControlRx, mfrBundleLinkFramesControlInvalid, mfrBundleLinkTimerExpiredCount, mfrBundleLinkLoopbackSuspected, mfrBundleLinkUnexpectedSequence, mfrBundleLinkMismatch } STATUS current DESCRIPTION "Group of objects describing bundle links." ::= { mfrMibGroups 2 } mfrMibTrapGroup NOTIFICATION-GROUP NOTIFICATIONS { mfrMibTrapBundleLinkMismatch } STATUS current DESCRIPTION "Group of objects describing notifications (traps)." ::= { mfrMibGroups 3 } END