Nortel-Magellan-Passport-VoiceNetworkingMIB DEFINITIONS ::= BEGIN IMPORTS OBJECT-TYPE FROM RFC-1212 components, passportMIBs FROM Nortel-Magellan-Passport-UsefulDefinitionsMIB Counter32, RowPointer, DisplayString, StorageType, RowStatus, PassportCounter64, InterfaceIndex, Gauge32, Integer32, Unsigned32 FROM Nortel-Magellan-Passport-StandardTextualConventionsMIB AsciiString, Hex, NonReplicated, DigitString, EnterpriseDateAndTime, Link FROM Nortel-Magellan-Passport-TextualConventionsMIB; -- LAST-UPDATED "9906090000Z" -- ORGANIZATION "Nortel" -- CONTACT-INFO " -- Nortel Magellan Network Management -- -- Postal: P.O. Box 5080, Station F -- Ottawa, Ontario -- Canada K2C 3T1 -- -- Email: nm_plm@nt.com" -- DESCRIPTION -- "The module describing the Nortel Magellan Passport -- VoiceNetworking Enterprise MIB." voiceNetworkingMIB OBJECT IDENTIFIER ::= { passportMIBs 109 } -- SigChan/n -- The SigChan component defines the signalling characteristics of the -- connection to the external equipment. sigChan OBJECT IDENTIFIER ::= { components 115 } sigChanRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF SigChanRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of sigChan components." ::= { sigChan 1 } sigChanRowStatusEntry OBJECT-TYPE SYNTAX SigChanRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single sigChan component." INDEX { sigChanIndex } ::= { sigChanRowStatusTable 1 } SigChanRowStatusEntry ::= SEQUENCE { sigChanRowStatus RowStatus, sigChanComponentName DisplayString, sigChanStorageType StorageType, sigChanIndex Integer32 } sigChanRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of sigChan components. These components can be added and deleted." ::= { sigChanRowStatusEntry 1 } sigChanComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { sigChanRowStatusEntry 2 } sigChanStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the sigChan tables." ::= { sigChanRowStatusEntry 4 } sigChanIndex OBJECT-TYPE SYNTAX Integer32 (1..16) ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the sigChan tables." ::= { sigChanRowStatusEntry 10 } sigChanCidDataTable OBJECT-TYPE SYNTAX SEQUENCE OF SigChanCidDataEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the attribute for a component's Customer Identifier (CID). Refer to the attribute description for a detailed explanation of CIDs." ::= { sigChan 100 } sigChanCidDataEntry OBJECT-TYPE SYNTAX SigChanCidDataEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the sigChanCidDataTable." INDEX { sigChanIndex } ::= { sigChanCidDataTable 1 } SigChanCidDataEntry ::= SEQUENCE { sigChanCustomerIdentifier Unsigned32 } sigChanCustomerIdentifier OBJECT-TYPE SYNTAX Unsigned32 (0 | 1..8191) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute holds the Customer Identifier (CID). Every component has a CID. If a component has a cid attribute, the component's CID is the provisioned value of that attribute; otherwise the component inherits the CID of its parent. The top- level component has a CID of 0. Every operator session also has a CID, which is the CID provisioned for the operator's user ID. An operator will see only the stream data for components having a matching CID. Also, the operator will be allowed to issue commands for only those components which have a matching CID. An operator CID of 0 is used to identify the Network Manager (referred to as 'NetMan' in DPN). This CID matches the CID of any component. Values 1 to 8191 inclusive (equivalent to 'basic CIDs' in DPN) may be assigned to specific customers." DEFVAL { 0 } ::= { sigChanCidDataEntry 1 } sigChanIfEntryTable OBJECT-TYPE SYNTAX SEQUENCE OF SigChanIfEntryEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the provisionable attributes for the ifEntry." ::= { sigChan 101 } sigChanIfEntryEntry OBJECT-TYPE SYNTAX SigChanIfEntryEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the sigChanIfEntryTable." INDEX { sigChanIndex } ::= { sigChanIfEntryTable 1 } SigChanIfEntryEntry ::= SEQUENCE { sigChanIfAdminStatus INTEGER, sigChanIfIndex InterfaceIndex } sigChanIfAdminStatus OBJECT-TYPE SYNTAX INTEGER { up(1), down(2), testing(3) } ACCESS read-write STATUS mandatory DESCRIPTION "The desired state of the interface. The up state indicates the interface is operational. The down state indicates the interface is not operational. The testing state indicates that no operational packets can be passed." DEFVAL { up } ::= { sigChanIfEntryEntry 1 } sigChanIfIndex OBJECT-TYPE SYNTAX InterfaceIndex (1..65535) ACCESS read-only STATUS mandatory DESCRIPTION "This is the index for the IfEntry. Its value is automatically initialized during the provisioning process." ::= { sigChanIfEntryEntry 2 } sigChanOperStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF SigChanOperStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group includes the Operational Status attribute. This attribute defines the current operational state of this component." ::= { sigChan 102 } sigChanOperStatusEntry OBJECT-TYPE SYNTAX SigChanOperStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the sigChanOperStatusTable." INDEX { sigChanIndex } ::= { sigChanOperStatusTable 1 } SigChanOperStatusEntry ::= SEQUENCE { sigChanSnmpOperStatus INTEGER } sigChanSnmpOperStatus OBJECT-TYPE SYNTAX INTEGER { up(1), down(2), testing(3) } ACCESS read-only STATUS mandatory DESCRIPTION "The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interface is not operational, thus unable to forward packets. testing state indicates that no operational packets can be passed." DEFVAL { up } ::= { sigChanOperStatusEntry 1 } sigChanStateTable OBJECT-TYPE SYNTAX SEQUENCE OF SigChanStateEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide." ::= { sigChan 103 } sigChanStateEntry OBJECT-TYPE SYNTAX SigChanStateEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the sigChanStateTable." INDEX { sigChanIndex } ::= { sigChanStateTable 1 } SigChanStateEntry ::= SEQUENCE { sigChanAdminState INTEGER, sigChanOperationalState INTEGER, sigChanUsageState INTEGER } sigChanAdminState OBJECT-TYPE SYNTAX INTEGER { locked(0), unlocked(1), shuttingDown(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component." DEFVAL { unlocked } ::= { sigChanStateEntry 1 } sigChanOperationalState OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle." DEFVAL { disabled } ::= { sigChanStateEntry 2 } sigChanUsageState OBJECT-TYPE SYNTAX INTEGER { idle(0), active(1), busy(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time." DEFVAL { idle } ::= { sigChanStateEntry 3 } sigChanProvTable OBJECT-TYPE SYNTAX SEQUENCE OF SigChanProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group represents the provisionable attributes of a SigChan." ::= { sigChan 104 } sigChanProvEntry OBJECT-TYPE SYNTAX SigChanProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the sigChanProvTable." INDEX { sigChanIndex } ::= { sigChanProvTable 1 } SigChanProvEntry ::= SEQUENCE { sigChanCommentText AsciiString, sigChanOctothorpeEod INTEGER, sigChanForceNpiTon INTEGER, sigChanDefaultNpiTon INTEGER } sigChanCommentText OBJECT-TYPE SYNTAX AsciiString (SIZE (0..40)) ACCESS read-write STATUS mandatory DESCRIPTION "Use of this attribute is at the discretion of the system administrator. Typically, this attribute specifies the name of the customer that is using this SigChan." ::= { sigChanProvEntry 1 } sigChanOctothorpeEod OBJECT-TYPE SYNTAX INTEGER { yes(0), no(1) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies whether the octothorpe should be used as an end of dialling indication. When this character is received, only the digits that have been received to that point will be used for address resolution. All subsequent digits will be forwarded to the far-end, but they will not be used. The octothorpe will not be sent to the far-end." DEFVAL { no } ::= { sigChanProvEntry 2 } sigChanForceNpiTon OBJECT-TYPE SYNTAX INTEGER { yes(0), no(1) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute, together with the defaultNpiTon attribute, controls Numbering Plan Identifier (NPI) and Type Of Number (TON) values to be used by the SigChan component for egress calls (if applicable). If set to yes, NPI and TON values defined by the defaultNpiTon attribute unconditionally overwrite values received in the call setup message from the subnet." DEFVAL { no } ::= { sigChanProvEntry 3 } sigChanDefaultNpiTon OBJECT-TYPE SYNTAX INTEGER { unknown(0), international(1), national(2), subscriber(3), p0(4), p1(5), p2(6), p3(7), p4(8), p5(9), p6(10), p7(11), casUnknown(12) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute, together with the forceNpiTon attribute, controls Numbering Plan Identifier (NPI) and Type Of Number (TON) values to be used by the SigChan component for egress calls (if applicable). The combination of NPI and TON values defined by the defaultNpiTon attribute is used for an egress call whenever: - the call setup message received from subnet indicates that NPI or TON information is not supplied or doesn't make sense, or - attribute forceNpiTon is set to yes Mapping between values of the defaultNpiTon attribute and associated combinations of NPI and TON values follows: casUnknown: NPI=unknown (0) TON=unknown (0) unknown: NPI=E.164 (1) TON=unknown (0) international: NPI=E.164 (1) TON=international (1) national: NPI=E.164 (1) TON=national (2) subscriber: NPI=E.164 (1) TON=subscriber (4) p0: NPI=private(9) TON=0 p1: NPI=private(9) TON=1 p2: NPI=private(9) TON=2 p3: NPI=private(9) TON=3 p4: NPI=private(9) TON=4 p5: NPI=private(9) TON=5 p6: NPI=private(9) TON=6 p7: NPI=private(9) TON=7" DEFVAL { casUnknown } ::= { sigChanProvEntry 4 } sigChanSubroutesTable OBJECT-TYPE SYNTAX SEQUENCE OF SigChanSubroutesEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This attribute identifies all of the VoiceSubroutes which are associated with this signalling channel." ::= { sigChan 307 } sigChanSubroutesEntry OBJECT-TYPE SYNTAX SigChanSubroutesEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the sigChanSubroutesTable." INDEX { sigChanIndex, sigChanSubroutesValue } ::= { sigChanSubroutesTable 1 } SigChanSubroutesEntry ::= SEQUENCE { sigChanSubroutesValue Link, sigChanSubroutesRowStatus RowStatus } sigChanSubroutesValue OBJECT-TYPE SYNTAX Link ACCESS read-write STATUS mandatory DESCRIPTION "This variable represents both the value and the index for the sigChanSubroutesTable." ::= { sigChanSubroutesEntry 1 } sigChanSubroutesRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS write-only STATUS mandatory DESCRIPTION "This variable is used to control the addition and deletion of individual values of the sigChanSubroutesTable." ::= { sigChanSubroutesEntry 2 } sigChanDegradedSubroutesTable OBJECT-TYPE SYNTAX SEQUENCE OF SigChanDegradedSubroutesEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This attribute lists all of the VoiceSubroute components that do not have all of their SwitchedVoiceService subcomponents available for use." ::= { sigChan 308 } sigChanDegradedSubroutesEntry OBJECT-TYPE SYNTAX SigChanDegradedSubroutesEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the sigChanDegradedSubroutesTable." INDEX { sigChanIndex, sigChanDegradedSubroutesValue } ::= { sigChanDegradedSubroutesTable 1 } SigChanDegradedSubroutesEntry ::= SEQUENCE { sigChanDegradedSubroutesValue RowPointer } sigChanDegradedSubroutesValue OBJECT-TYPE SYNTAX RowPointer ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents both the value and the index for the sigChanDegradedSubroutesTable." ::= { sigChanDegradedSubroutesEntry 1 } -- -- *** THIS SUBTREE CURRENTLY NOT IMPLEMENTED *** -- -- SigChan/n Bchannel/n -- This component contains operational attributes of an individual -- B-channel serviced by the SigChan component. The Bchannel -- component instance value reflects the external (protocol specific) -- channel number. In nB+D configurations, channel number also -- reflects the related interface: -- Bchannel/1-xx - primary interface, -- Bchannel/101-1xx - secondary interface, -- Bchannel/201-2xx - tertiary interface, -- Bchannel/301-3xx - quaternary interface sigChanBch OBJECT IDENTIFIER ::= { sigChan 7 } sigChanBchRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF SigChanBchRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of sigChanBch components." ::= { sigChanBch 1 } sigChanBchRowStatusEntry OBJECT-TYPE SYNTAX SigChanBchRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single sigChanBch component." INDEX { sigChanIndex, sigChanBchIndex } ::= { sigChanBchRowStatusTable 1 } SigChanBchRowStatusEntry ::= SEQUENCE { sigChanBchRowStatus RowStatus, sigChanBchComponentName DisplayString, sigChanBchStorageType StorageType, sigChanBchIndex Integer32 } sigChanBchRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of sigChanBch components. These components cannot be added nor deleted." ::= { sigChanBchRowStatusEntry 1 } sigChanBchComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { sigChanBchRowStatusEntry 2 } sigChanBchStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the sigChanBch tables." ::= { sigChanBchRowStatusEntry 4 } sigChanBchIndex OBJECT-TYPE SYNTAX Integer32 (1..331) ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the sigChanBch tables." ::= { sigChanBchRowStatusEntry 10 } sigChanBchOperTable OBJECT-TYPE SYNTAX SEQUENCE OF SigChanBchOperEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This group contains various operational attributes of a B-channel serviced by a Signalling Channel." ::= { sigChanBch 4 } sigChanBchOperEntry OBJECT-TYPE SYNTAX SigChanBchOperEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the sigChanBchOperTable." INDEX { sigChanIndex, sigChanBchIndex } ::= { sigChanBchOperTable 1 } SigChanBchOperEntry ::= SEQUENCE { sigChanBchStatus INTEGER, sigChanBchTimeSlot Unsigned32, sigChanBchVsrInstance Unsigned32, sigChanBchCalledDirectoryNumber DigitString } sigChanBchStatus OBJECT-TYPE SYNTAX INTEGER { unknown(0), maintB(1), idle(2), busy(3), ingress(4), egress(5), idleMaintenance(6), ingressMaintenance(7), egressMaintenance(8), outOfService(9) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates what is current internal B-channel state. The attribute may have the following values for any supported access signalling protocol on Passport: unknown, the B-channel has not registered yet for SigChan services maintB, the B-channel is undergoing a maintenance action idle, the B-channel is available for ingress/egress calls busy, the B-channel is currently being used for an ingress or egress call ingress, the B-channel is currently being used for an ingress call (from the external network to the subnet) egress, the B-channel is currently being used for an egress call (from the subnet to the external network) In addition, CCS protocols supporting SERVICE messaging may also use the following values: idleMaintenance, the B-channel received a SERVICE message placing the channel in maintenance, and no calls are active on the channel ingressMaintenance, the B-channel received a SERVICE message placing the channel in maintenance, and an incoming call is active on the channel egressMaintenance, the B-channel received a SERVICE message placing the channel in maintenance, and an outgoing call is active on the channel outOfService, a SERVICE message to or from the PBX has placed the channel out of service" DEFVAL { unknown } ::= { sigChanBchOperEntry 1 } sigChanBchTimeSlot OBJECT-TYPE SYNTAX Unsigned32 (0..100) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates which timeslot the B-channel uses." DEFVAL { 0 } ::= { sigChanBchOperEntry 2 } sigChanBchVsrInstance OBJECT-TYPE SYNTAX Unsigned32 (0..255) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the component instance of the VoiceSubroute to which the B-channel belongs." DEFVAL { 0 } ::= { sigChanBchOperEntry 3 } sigChanBchCalledDirectoryNumber OBJECT-TYPE SYNTAX DigitString (SIZE (1..32)) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the dialled number for the currently active call on this B-channel." ::= { sigChanBchOperEntry 4 } -- SigChan/n Gateway -- This component contains operational attributes which describe -- gateway capabilities of the SigChan component as well as the basic -- statistics related to calls requiring signalling protocol conversion. sigChanGw OBJECT IDENTIFIER ::= { sigChan 15 } sigChanGwRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF SigChanGwRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of sigChanGw components." ::= { sigChanGw 1 } sigChanGwRowStatusEntry OBJECT-TYPE SYNTAX SigChanGwRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single sigChanGw component." INDEX { sigChanIndex, sigChanGwIndex } ::= { sigChanGwRowStatusTable 1 } SigChanGwRowStatusEntry ::= SEQUENCE { sigChanGwRowStatus RowStatus, sigChanGwComponentName DisplayString, sigChanGwStorageType StorageType, sigChanGwIndex NonReplicated } sigChanGwRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of sigChanGw components. These components cannot be added nor deleted." ::= { sigChanGwRowStatusEntry 1 } sigChanGwComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { sigChanGwRowStatusEntry 2 } sigChanGwStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the sigChanGw tables." ::= { sigChanGwRowStatusEntry 4 } sigChanGwIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the sigChanGw tables." ::= { sigChanGwRowStatusEntry 10 } sigChanGwStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF SigChanGwStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group provides signalling gateway related statistical attributes for the SigChan component." ::= { sigChanGw 101 } sigChanGwStatsEntry OBJECT-TYPE SYNTAX SigChanGwStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the sigChanGwStatsTable." INDEX { sigChanIndex, sigChanGwIndex } ::= { sigChanGwStatsTable 1 } SigChanGwStatsEntry ::= SEQUENCE { sigChanGwRequiredConversions Counter32, sigChanGwUnsupportedConversions Counter32 } sigChanGwRequiredConversions OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the total number of calls that have been made from the subnet to the interface (that is external equipment, for example a PBX) which needed signalling protocol conversion. The value wraps to zero when it exceeds its maximum. The count includes both, supported and unsupported conversions." ::= { sigChanGwStatsEntry 1 } sigChanGwUnsupportedConversions OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the total number of calls that have been made from the subnet to the interface (that is external equipment, for example a PBX) which needed signalling protocol conversion but were rejected since the requested conversion was not supported. The value wraps to zero when it exceeds its maximum." ::= { sigChanGwStatsEntry 2 } sigChanGwGwcTable OBJECT-TYPE SYNTAX SEQUENCE OF SigChanGwGwcEntry ACCESS not-accessible STATUS obsolete DESCRIPTION "This attribute has been migrated to gatewayCapability." ::= { sigChanGw 301 } sigChanGwGwcEntry OBJECT-TYPE SYNTAX SigChanGwGwcEntry ACCESS not-accessible STATUS obsolete DESCRIPTION "An entry in the sigChanGwGwcTable." INDEX { sigChanIndex, sigChanGwIndex, sigChanGwGwcIndex } ::= { sigChanGwGwcTable 1 } SigChanGwGwcEntry ::= SEQUENCE { sigChanGwGwcIndex INTEGER, sigChanGwGwcValue INTEGER } sigChanGwGwcIndex OBJECT-TYPE SYNTAX INTEGER { etsiQsigPG(0), nisPG(1), analogAndCasPG(2), euroIsdnPG(3), mcdnPG(4), mcdnUniPG(5) } ACCESS not-accessible STATUS obsolete DESCRIPTION "This variable represents the sigChanGwGwcTable specific index for the sigChanGwGwcTable." ::= { sigChanGwGwcEntry 1 } sigChanGwGwcValue OBJECT-TYPE SYNTAX INTEGER { noGw(0), singleEndedGw(1), doubleEndedGw(2), singleOrDoubleEndedGw(3), nativePG(4) } ACCESS read-only STATUS obsolete DESCRIPTION "This variable represents an individual value for the sigChanGwGwcTable." ::= { sigChanGwGwcEntry 2 } sigChanGwGatewayCapTable OBJECT-TYPE SYNTAX SEQUENCE OF SigChanGwGatewayCapEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This attribute indicates the SigChan component's capability to convert from one access signalling type to another. Access signalling protocols (protocols between a Passport and external switching equipment, for example a PBX) are grouped into protocol groups. Protocols within the same protocol group are considered completely compatible. This means that no extra processing is needed when a call originates from an ingress link using protocol A and terminates on an egress link using protocol B if protocols A and B belong to the same protocol group. The following protocol groups are defined: etsiQsigPG - ETSI QSIG protocol group containing ETSI QSIG protocol, mcdnFamilyPG - MCDN Family protocol group containing NIS, Meridian Customer Defined Network (MCDN) peer to peer, and MCDN User to Network (UNI) protocols, analogAndCasPG - Analog and CAS protocol group containing most of the analog and channel associated signalling protocols with steady state line signalling and DTMF register signalling, euroIsdnPG - EURO ISDN protocol group containing most of the European national ISDN protocols based on ETSI ISDN (ETSI-T) standard. For every of the protocols group this attribute indicates what is the level of protocol conversion support available on the SigChan component: noGw - no protocol conversion available for the protocol group, singleEndedGw - only full protocol conversion available for the protocol group (that is the SigChan component on the other side of the subnet does not have to get involved in the gateway processing), doubleEndedGw - only partial protocol conversion available for the protocol group (that is both SigChan components, ingress and egress, have to get involved in signalling conversion), singleOrDoubleEndedGw - both, full and partial protocol conversions available for the protocol group, nativePG - the protocol group is the native protocol group for the SigChan component." ::= { sigChanGw 302 } sigChanGwGatewayCapEntry OBJECT-TYPE SYNTAX SigChanGwGatewayCapEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the sigChanGwGatewayCapTable." INDEX { sigChanIndex, sigChanGwIndex, sigChanGwGatewayCapIndex } ::= { sigChanGwGatewayCapTable 1 } SigChanGwGatewayCapEntry ::= SEQUENCE { sigChanGwGatewayCapIndex INTEGER, sigChanGwGatewayCapValue INTEGER } sigChanGwGatewayCapIndex OBJECT-TYPE SYNTAX INTEGER { etsiQsigPG(0), mcdnPG(1), analogAndCasPG(2), euroIsdnPG(3) } ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the sigChanGwGatewayCapTable specific index for the sigChanGwGatewayCapTable." ::= { sigChanGwGatewayCapEntry 1 } sigChanGwGatewayCapValue OBJECT-TYPE SYNTAX INTEGER { noGw(0), singleEndedGw(1), doubleEndedGw(2), singleOrDoubleEndedGw(3), nativePG(4) } ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents an individual value for the sigChanGwGatewayCapTable." ::= { sigChanGwGatewayCapEntry 2 } -- -- *** THIS SUBTREE CURRENTLY NOT IMPLEMENTED *** -- -- SigChan/n NcaSession/n -- This component represents a single Non Call-Associated signalling -- Session (NCAS) serviced by the SigChan component. Non -- call-associated signalling sessions are only supported on some -- Common Channel Signalling (CCS) protocols (for example ETSI -- QSIG, ETSI UNI ISDN). The instance value of a NcaSession -- component is an arbitrary number which does not change during an -- individual NCAS session. sigChanNcas OBJECT IDENTIFIER ::= { sigChan 16 } sigChanNcasRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF SigChanNcasRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of sigChanNcas components." ::= { sigChanNcas 1 } sigChanNcasRowStatusEntry OBJECT-TYPE SYNTAX SigChanNcasRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single sigChanNcas component." INDEX { sigChanIndex, sigChanNcasIndex } ::= { sigChanNcasRowStatusTable 1 } SigChanNcasRowStatusEntry ::= SEQUENCE { sigChanNcasRowStatus RowStatus, sigChanNcasComponentName DisplayString, sigChanNcasStorageType StorageType, sigChanNcasIndex Integer32 } sigChanNcasRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of sigChanNcas components. These components cannot be added nor deleted." ::= { sigChanNcasRowStatusEntry 1 } sigChanNcasComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { sigChanNcasRowStatusEntry 2 } sigChanNcasStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the sigChanNcas tables." ::= { sigChanNcasRowStatusEntry 4 } sigChanNcasIndex OBJECT-TYPE SYNTAX Integer32 (0..65535) ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the sigChanNcas tables." ::= { sigChanNcasRowStatusEntry 10 } sigChanNcasOperTable OBJECT-TYPE SYNTAX SEQUENCE OF SigChanNcasOperEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This group contains various operational attributes of a non call-associated signalling session serviced by a SigChan component." ::= { sigChanNcas 100 } sigChanNcasOperEntry OBJECT-TYPE SYNTAX SigChanNcasOperEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the sigChanNcasOperTable." INDEX { sigChanIndex, sigChanNcasIndex } ::= { sigChanNcasOperTable 1 } SigChanNcasOperEntry ::= SEQUENCE { sigChanNcasDirection INTEGER, sigChanNcasCallReference Hex, sigChanNcasCalledDirectoryNumber DigitString, sigChanNcasDuration Unsigned32 } sigChanNcasDirection OBJECT-TYPE SYNTAX INTEGER { ingress(1), egress(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates what is the direction of the non call-associated signalling session. The attribute may have the following values: ingress, the NCAS session is originated by the external equipment into the subnet egress, the NCAS session is originated by the subnet into the external equipment" ::= { sigChanNcasOperEntry 1 } sigChanNcasCallReference OBJECT-TYPE SYNTAX Hex (0..65535) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates which call reference the NCAS session uses." ::= { sigChanNcasOperEntry 2 } sigChanNcasCalledDirectoryNumber OBJECT-TYPE SYNTAX DigitString (SIZE (1..32)) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the dialled number for the NCAS session." ::= { sigChanNcasOperEntry 3 } sigChanNcasDuration OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates duration of the NCAS session since its establishment." DEFVAL { 0 } ::= { sigChanNcasOperEntry 4 } -- SigChan/n VnetInternalCauseManipulation -- This component represents the provisionable attributes for the -- internal, Passport and subnet generated cause codes of an -- establishing call. This component can be added for most of the -- ISDN (common channel signalling) protocols (EtsiQsig, NisSig, -- EuroIsdn) and cannot be added for a channel associated signalling -- protocol. This component is useful in a network where the -- originating PBX has restricted conditions to initiating alternate -- rerouting (rerouting on just one, specific, clearing cause code). sigChanICmap OBJECT IDENTIFIER ::= { sigChan 18 } sigChanICmapRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF SigChanICmapRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of sigChanICmap components." ::= { sigChanICmap 1 } sigChanICmapRowStatusEntry OBJECT-TYPE SYNTAX SigChanICmapRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single sigChanICmap component." INDEX { sigChanIndex, sigChanICmapIndex } ::= { sigChanICmapRowStatusTable 1 } SigChanICmapRowStatusEntry ::= SEQUENCE { sigChanICmapRowStatus RowStatus, sigChanICmapComponentName DisplayString, sigChanICmapStorageType StorageType, sigChanICmapIndex NonReplicated } sigChanICmapRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of sigChanICmap components. These components can be added and deleted." ::= { sigChanICmapRowStatusEntry 1 } sigChanICmapComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { sigChanICmapRowStatusEntry 2 } sigChanICmapStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the sigChanICmap tables." ::= { sigChanICmapRowStatusEntry 4 } sigChanICmapIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the sigChanICmap tables." ::= { sigChanICmapRowStatusEntry 10 } sigChanICmapIntCauseTable OBJECT-TYPE SYNTAX SEQUENCE OF SigChanICmapIntCauseEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the provisionable, Passport generated clearing reasons of an establishing call." ::= { sigChanICmap 100 } sigChanICmapIntCauseEntry OBJECT-TYPE SYNTAX SigChanICmapIntCauseEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the sigChanICmapIntCauseTable." INDEX { sigChanIndex, sigChanICmapIndex } ::= { sigChanICmapIntCauseTable 1 } SigChanICmapIntCauseEntry ::= SEQUENCE { sigChanICmapEgressLinkOutOfServCause Unsigned32, sigChanICmapChanOrCircNotAvailCause Unsigned32, sigChanICmapTempFailureCause Unsigned32, sigChanICmapSwitchCongestCause Unsigned32, sigChanICmapReqChanOrCircNotAvailCause Unsigned32, sigChanICmapResourceUnavailCause Unsigned32, sigChanICmapServNotAllowedCause Unsigned32, sigChanICmapNoSuchChannelCause Unsigned32, sigChanICmapIncompatDestCause Unsigned32 } sigChanICmapEgressLinkOutOfServCause OBJECT-TYPE SYNTAX Unsigned32 (0..127 | 128) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the cause code sent to the originating PBX when the data link to the remote PBX is down or when remote channels are in maintenance. If the component is not added or if the default value autoConfigure is provisioned for the attribute the cause code sent to the originating PBX is not manipulated and the clearing process is not influenced. For this case, a typical cause code value sent back to the originating PBX is 27. VALUES ( 128 = autoConfigure )" DEFVAL { 128 } ::= { sigChanICmapIntCauseEntry 1 } sigChanICmapChanOrCircNotAvailCause OBJECT-TYPE SYNTAX Unsigned32 (0..127 | 128) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the cause code sent to the originating PBX if no timeslot is available for an incoming call. If the component is not added or if the default value autoConfigure is provisioned for the attribute the cause code sent to the originating PBX is not manipulated and the clearing process is not influenced. For this case, a typical cause code value sent back to the originating PBX is 34. VALUES ( 128 = autoConfigure )" DEFVAL { 128 } ::= { sigChanICmapIntCauseEntry 2 } sigChanICmapTempFailureCause OBJECT-TYPE SYNTAX Unsigned32 (0..127 | 128) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the cause code sent to the originating PBX when PORS fails to establish a call due to congestion or a disabled trunk. It is also generated when the calling side fails to decode payload capabilities sent by the called side. If the component is not added or if the default value autoConfigure is provisioned for the attribute the cause code sent to the originating PBX is not manipulated and the clearing process is not influenced. For this case, a typical cause code value sent back to the originating PBX is 41. VALUES ( 128 = autoConfigure )" DEFVAL { 128 } ::= { sigChanICmapIntCauseEntry 3 } sigChanICmapSwitchCongestCause OBJECT-TYPE SYNTAX Unsigned32 (0..127 | 128) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the cause code sent to the originating PBX when the allocation of internal resources for an incoming call fails. If the component is not added or if the default value autoConfigure is provisioned for the attribute the cause code sent to the originating PBX is not manipulated and the clearing process is not influenced. For this case, typical cause code values sent back to the originating PBX are 42 for NIS and 41 for ETSI. VALUES ( 128 = autoConfigure )" DEFVAL { 128 } ::= { sigChanICmapIntCauseEntry 4 } sigChanICmapReqChanOrCircNotAvailCause OBJECT-TYPE SYNTAX Unsigned32 (0..127 | 128) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the cause code sent to the originating PBX when an exclusively requested channel is not in service or a channel request is unsuccessful. If the component is not added or if the default value autoConfigure is provisioned for the attribute the cause code sent to the originating PBX is not manipulated and the clearing process is not influenced. For this case, a typical cause code value sent back to the originating PBX is 44. VALUES ( 128 = autoConfigure )" DEFVAL { 128 } ::= { sigChanICmapIntCauseEntry 5 } sigChanICmapResourceUnavailCause OBJECT-TYPE SYNTAX Unsigned32 (0..127 | 128) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the cause code sent to the originating PBX when the path establishing timer expires, when the switched voice service associated to a call is locked by CAS or when an H-channel is requested. If the component is not added or if the default value autoConfigure is provisioned for the attribute the cause code sent to the originating PBX is not manipulated and the clearing process is not influenced. For this case, typical cause code values sent back to the originating PBX are 47 for NIS and 44 for ETSI. VALUES ( 128 = autoConfigure )" DEFVAL { 128 } ::= { sigChanICmapIntCauseEntry 6 } sigChanICmapServNotAllowedCause OBJECT-TYPE SYNTAX Unsigned32 (0..127 | 128) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the cause code sent to the originating PBX when the requested call type (voice or data) is not compatible with Vroute typeOfRoute at the calling side. If the component is not added or if the default value autoConfigure is provisioned for the attribute the cause code sent to the originating PBX is not manipulated and the clearing process is not influenced. For this case, a typical cause code value sent back to the originating PBX is 63. VALUES ( 128 = autoConfigure )" DEFVAL { 128 } ::= { sigChanICmapIntCauseEntry 7 } sigChanICmapNoSuchChannelCause OBJECT-TYPE SYNTAX Unsigned32 (0..127 | 128) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the cause code sent to the originating PBX when a requested channel does not exist. If the component is not added or if the default value autoConfigure is provisioned for the attribute the cause code sent to the originating PBX is not manipulated and the clearing process is not influenced. For this case, a typical cause code value sent back to the originating PBX is 82. VALUES ( 128 = autoConfigure )" DEFVAL { 128 } ::= { sigChanICmapIntCauseEntry 8 } sigChanICmapIncompatDestCause OBJECT-TYPE SYNTAX Unsigned32 (0..127 | 128) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the cause code sent to the originating PBX when the calling and called side capabilities do not match. If the component is not added or if the default value autoConfigure is provisioned for the attribute the cause code sent to the originating PBX is not manipulated and the clearing process is not influenced. For this case, a typical cause code value sent back to the originating PBX is 88. VALUES ( 128 = autoConfigure )" DEFVAL { 128 } ::= { sigChanICmapIntCauseEntry 9 } -- VoiceRoute/n -- A VoiceRoute component defines the common characteristics of the -- connections to a Private Branch Exchange (PBX). There is normally -- one VoiceRoute per attached PBX. vRoute OBJECT IDENTIFIER ::= { components 116 } vRouteRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF VRouteRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of vRoute components." ::= { vRoute 1 } vRouteRowStatusEntry OBJECT-TYPE SYNTAX VRouteRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single vRoute component." INDEX { vRouteIndex } ::= { vRouteRowStatusTable 1 } VRouteRowStatusEntry ::= SEQUENCE { vRouteRowStatus RowStatus, vRouteComponentName DisplayString, vRouteStorageType StorageType, vRouteIndex Integer32 } vRouteRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of vRoute components. These components can be added and deleted." ::= { vRouteRowStatusEntry 1 } vRouteComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { vRouteRowStatusEntry 2 } vRouteStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the vRoute tables." ::= { vRouteRowStatusEntry 4 } vRouteIndex OBJECT-TYPE SYNTAX Integer32 (1..16) ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the vRoute tables." ::= { vRouteRowStatusEntry 10 } vRouteProvTable OBJECT-TYPE SYNTAX SEQUENCE OF VRouteProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the provisionable attributes of a Voice Networking VoiceRoute component." ::= { vRoute 10 } vRouteProvEntry OBJECT-TYPE SYNTAX VRouteProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the vRouteProvTable." INDEX { vRouteIndex } ::= { vRouteProvTable 1 } VRouteProvEntry ::= SEQUENCE { vRouteCommentText AsciiString, vRouteTypeOfRoute INTEGER, vRouteDiallingPlan0 OCTET STRING, vRouteDiallingPlan1 OCTET STRING, vRouteDiallingPlan2 OCTET STRING, vRouteHuntingAlgorithm INTEGER, vRouteMinimumDigitsToRoute Unsigned32, vRouteVoiceNetworkingCallServer Link, vRouteOverrideDirectoryNumber DigitString, vRoutePrivateNetworkIdentifer Unsigned32 } vRouteCommentText OBJECT-TYPE SYNTAX AsciiString (SIZE (0..40)) ACCESS read-write STATUS mandatory DESCRIPTION "Use of this attribute is at the discretion of the system administrator. Typically, it specifies the name of the customer that is using this VoiceRoute." ::= { vRouteProvEntry 1 } vRouteTypeOfRoute OBJECT-TYPE SYNTAX INTEGER { voice(0), data(1), voiceData(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the type of calls (either voice, data, or both voice and data) that this VoiceRoute will accept from the Passport subnet and the local PBX. If typeOfRoute is set to voice, then all data calls from the subnet and the local PBX will be rejected. If typeOfRoute is set to data, then all voice calls from the subnet and the local PBX will be rejected. If typeOfRoute is set to voiceData, then all data and voice calls will be accepted from the subnet and the local PBX." DEFVAL { voiceData } ::= { vRouteProvEntry 2 } vRouteDiallingPlan0 OBJECT-TYPE SYNTAX OCTET STRING (SIZE (2)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies how to map the numbering plan indication and the type of number into the Vncs database diallingPlan0. For more information refer to NTP 241-7001-4xx Voice Networking Users Guide. There are three numbering plans that are allowed, unknown, E.164, and private. Within each of these, there are eight possible type of numbers. Since the name for the type of numbers for the private numbering plans varies from protocol to protocol, a generic scheme has been adopted. unknown means that the sending and receiving switches have no knowledge of the numbering plan. international means that the sending switch has identified the number format as matching the E.164 international dialling. national means that the sending switch has identified the number as conforming to the E.164 national dialling plan subscriber means that the number is the address of a customer conforming to the local public network. p0, p1, p2, p3, p4, p5, p6 and p7 are private numbering plans, with a type of number zero to seven. casUnknown means any number received from a Channel Associated Signalling (CAS) trunk. Description of bits: unknown(0) international(1) national(2) subscriber(3) p0(4) p1(5) p2(6) p3(7) p4(8) p5(9) p6(10) p7(11) casUnknown(12)" DEFVAL { 'fff8'H } ::= { vRouteProvEntry 6 } vRouteDiallingPlan1 OBJECT-TYPE SYNTAX OCTET STRING (SIZE (2)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies how to map the numbering plan indication and the type of number into the Vncs database diallingPlan1. For more information refer to NTP 241-7001-4xx Voice Networking Users Guide. There are three numbering plans that are allowed, unknown, E.164, and private. Within each of these, there are eight possible type of numbers. Since the name for the type of numbers for the private numbering plans varies from protocol to protocol, a generic scheme has been adopted. unknown means that the sending and receiving switches have no knowledge of the numbering plan. international means that the sending switch has identified the number format as matching the E.164 international dialling plan. national means that the sending switch has identified the number as conforming to the E.164 national dialling plan subscriber means that the number is the address of a customer conforming to the local public network. p0, p1, p2, p3, p4, p5, p6 and p7 are private numbering plans, with a type of number zero to seven. casUnknown means any number received from a Channel Associated Signalling (CAS) trunk. Description of bits: unknown(0) international(1) national(2) subscriber(3) p0(4) p1(5) p2(6) p3(7) p4(8) p5(9) p6(10) p7(11) casUnknown(12)" ::= { vRouteProvEntry 7 } vRouteDiallingPlan2 OBJECT-TYPE SYNTAX OCTET STRING (SIZE (2)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies how to map the numbering plan indication and the type of number into the Vncs database diallingPlan2. For more information refer to NTP 241-7001-4xx Voice Networking Users Guide. There are three numbering plans that are allowed, unknown, E.164, and private. Within each of these, there are eight possible type of numbers. Since the name for the type of numbers for the private numbering plans varies from protocol to protocol, a generic scheme has been adopted. unknown means that the sending and receiving switches have no knowledge of the numbering plan. international means that the sending switch has identified the number format as matching the E.164 international dialling plan. national means that the sending switch has identified the number as conforming to the E.164 national dialling plan subscriber means that the number is the address of a customer conforming to the local public network. p0, p1, p2, p3, p4, p5, p6 and p7 are private numbering plans, with a type of number zero to seven. casUnknown means any number received from a Channel Associated Signalling (CAS) trunk. Description of bits: unknown(0) international(1) national(2) subscriber(3) p0(4) p1(5) p2(6) p3(7) p4(8) p5(9) p6(10) p7(11) casUnknown(12)" ::= { vRouteProvEntry 8 } vRouteHuntingAlgorithm OBJECT-TYPE SYNTAX INTEGER { bottomUpLinear(0), topDownLinear(1) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the type of hunting algorithm that should be used by the VoiceRoute and VoiceSubroutes when selecting a channel to make an outgoing call. bottomUpLinear means that a call from the subnet will be passed to the lowest instance of the VoiceSubroutes, which in turn will pass the call to the lowest instance of SwitchedVoiceService. If there are no available SwitchedVoiceServices in that VoiceSubroute then the process will be repeated for the next lowest instance of VoiceSubroute. topDownLinear means that a call from the subnet will be passed to the highest instance of the VoiceSubroutes, which in turn will pass the call to the highest instance of SwitchedVoiceService. If there are no available SwitchedVoiceServices in that VoiceSubroute then the process will be repeated for the next highest instance of VoiceSubroute." DEFVAL { bottomUpLinear } ::= { vRouteProvEntry 9 } vRouteMinimumDigitsToRoute OBJECT-TYPE SYNTAX Unsigned32 (1..16) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the number of digits that must be received before an address resolution request will be sent to the VoiceNetworkingCallServer. Once this level has been exceeded an address resolution request will be sent for every digit received until the dialled number has been resolved in the database. This number should be set to a value which represents the average number of digits that will allow for a unique end-point to be identified. If the number is set too low, then the number of simultaneous calls that can be handled by the VoiceNetworkingCallServer will be reduced since the number of address resolution requests sent for each call will be increased. If it is set too high then address resolution request messages will not be sent to the VoiceNetworkingCallServer until the end-of-dial timer has expired (approximately 12 seconds after the last digit has been received). This can result in very long call setup times." DEFVAL { 3 } ::= { vRouteProvEntry 10 } vRouteVoiceNetworkingCallServer OBJECT-TYPE SYNTAX Link ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies which Vncs instance should be used by all calls into this VoiceRoute from the PBX." ::= { vRouteProvEntry 11 } vRouteOverrideDirectoryNumber OBJECT-TYPE SYNTAX DigitString (SIZE (0..24)) ACCESS read-write STATUS mandatory DESCRIPTION "The number specified here will be used in place of the dialled number to lookup the destination in the VoiceNetworkingCallServer. A null string means that the routing decision should be based on the dialled number. The numbering plan type that will be used will be noAccessCode." DEFVAL { ''H } -- "" ::= { vRouteProvEntry 12 } vRoutePrivateNetworkIdentifer OBJECT-TYPE SYNTAX Unsigned32 (0..32700) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the private network identifier (PNI) value. If the value is zero then connectionless supplementary service transport for TCAP formatted FACILITY messages is not supported." DEFVAL { 0 } ::= { vRouteProvEntry 13 } vRouteCidDataTable OBJECT-TYPE SYNTAX SEQUENCE OF VRouteCidDataEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the attribute for a component's Customer Identifier (CID). Refer to the attribute description for a detailed explanation of CIDs." ::= { vRoute 11 } vRouteCidDataEntry OBJECT-TYPE SYNTAX VRouteCidDataEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the vRouteCidDataTable." INDEX { vRouteIndex } ::= { vRouteCidDataTable 1 } VRouteCidDataEntry ::= SEQUENCE { vRouteCustomerIdentifier Unsigned32 } vRouteCustomerIdentifier OBJECT-TYPE SYNTAX Unsigned32 (0 | 1..8191) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute holds the Customer Identifier (CID). Every component has a CID. If a component has a cid attribute, the component's CID is the provisioned value of that attribute; otherwise the component inherits the CID of its parent. The top- level component has a CID of 0. Every operator session also has a CID, which is the CID provisioned for the operator's user ID. An operator will see only the stream data for components having a matching CID. Also, the operator will be allowed to issue commands for only those components which have a matching CID. An operator CID of 0 is used to identify the Network Manager (referred to as 'NetMan' in DPN). This CID matches the CID of any component. Values 1 to 8191 inclusive (equivalent to 'basic CIDs' in DPN) may be assigned to specific customers." DEFVAL { 0 } ::= { vRouteCidDataEntry 1 } vRouteIfEntryTable OBJECT-TYPE SYNTAX SEQUENCE OF VRouteIfEntryEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the provisionable attributes for the ifEntry." ::= { vRoute 12 } vRouteIfEntryEntry OBJECT-TYPE SYNTAX VRouteIfEntryEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the vRouteIfEntryTable." INDEX { vRouteIndex } ::= { vRouteIfEntryTable 1 } VRouteIfEntryEntry ::= SEQUENCE { vRouteIfAdminStatus INTEGER, vRouteIfIndex InterfaceIndex } vRouteIfAdminStatus OBJECT-TYPE SYNTAX INTEGER { up(1), down(2), testing(3) } ACCESS read-write STATUS mandatory DESCRIPTION "The desired state of the interface. The up state indicates the interface is operational. The down state indicates the interface is not operational. The testing state indicates that no operational packets can be passed." DEFVAL { up } ::= { vRouteIfEntryEntry 1 } vRouteIfIndex OBJECT-TYPE SYNTAX InterfaceIndex (1..65535) ACCESS read-only STATUS mandatory DESCRIPTION "This is the index for the IfEntry. Its value is automatically initialized during the provisioning process." ::= { vRouteIfEntryEntry 2 } vRouteStateTable OBJECT-TYPE SYNTAX SEQUENCE OF VRouteStateEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide." ::= { vRoute 13 } vRouteStateEntry OBJECT-TYPE SYNTAX VRouteStateEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the vRouteStateTable." INDEX { vRouteIndex } ::= { vRouteStateTable 1 } VRouteStateEntry ::= SEQUENCE { vRouteAdminState INTEGER, vRouteOperationalState INTEGER, vRouteUsageState INTEGER } vRouteAdminState OBJECT-TYPE SYNTAX INTEGER { locked(0), unlocked(1), shuttingDown(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component." DEFVAL { unlocked } ::= { vRouteStateEntry 1 } vRouteOperationalState OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle." DEFVAL { disabled } ::= { vRouteStateEntry 2 } vRouteUsageState OBJECT-TYPE SYNTAX INTEGER { idle(0), active(1), busy(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time." DEFVAL { idle } ::= { vRouteStateEntry 3 } vRouteOperStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF VRouteOperStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group includes the Operational Status attribute. This attribute defines the current operational state of this component." ::= { vRoute 14 } vRouteOperStatusEntry OBJECT-TYPE SYNTAX VRouteOperStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the vRouteOperStatusTable." INDEX { vRouteIndex } ::= { vRouteOperStatusTable 1 } VRouteOperStatusEntry ::= SEQUENCE { vRouteSnmpOperStatus INTEGER } vRouteSnmpOperStatus OBJECT-TYPE SYNTAX INTEGER { up(1), down(2), testing(3) } ACCESS read-only STATUS mandatory DESCRIPTION "The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interface is not operational, thus unable to forward packets. testing state indicates that no operational packets can be passed." DEFVAL { up } ::= { vRouteOperStatusEntry 1 } vRouteStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF VRouteStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group provides the operational attributes for the VoiceRoute component. It contains information relating to calls that originate from the network." ::= { vRoute 15 } vRouteStatsEntry OBJECT-TYPE SYNTAX VRouteStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the vRouteStatsTable." INDEX { vRouteIndex } ::= { vRouteStatsTable 1 } VRouteStatsEntry ::= SEQUENCE { vRouteTotalCallsFromSubnet Counter32, vRouteCallsClearedNoChannel Counter32, vRouteCallsClearedOutOfService Counter32, vRouteCallsRejected Counter32 } vRouteTotalCallsFromSubnet OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the total number of calls that have been received from the Passport subnet, including calls that fail. The value wraps to zero when it reaches its maximum." ::= { vRouteStatsEntry 1 } vRouteCallsClearedNoChannel OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the total number of calls from the subnet that were rejected when all of the in-service channels were busy. When a call is rejected for this reason, the cause code sent to the originator is 34, no circuit/channel available. The value wraps to zero when it reaches its maximum." ::= { vRouteStatsEntry 2 } vRouteCallsClearedOutOfService OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the total number of calls from the subnet that were rejected because all of the channels were out-of-service. A channel is considered out-of-service if it is unavailable for any reason other than it is being engaged in handling a call. That is, an operator lock of any of the components required for the channel's operation, or problems which interfere with the connection to the PBX, will cause the channel to be considered out-of-service. When a call is rejected for this reason, the cause code sent back to the originator is 27, destination out-of-service. The value wraps to zero when it reaches its maximum." ::= { vRouteStatsEntry 3 } vRouteCallsRejected OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the total number of calls from the subnet that were rejected because they were: 1) voice calls to a typeOfRoute which is set to data, 2) data calls to a typeOfRoute which is set to voice, 3) using a signalling protocol which is incompatible with this end. The value wraps to zero when it reaches its maximum." ::= { vRouteStatsEntry 4 } vRouteSubroutesTable OBJECT-TYPE SYNTAX SEQUENCE OF VRouteSubroutesEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This attribute specifies all of the VoiceSubroutes which are associated with this VoiceRoute. There are only 4 VoiceSubroutes allowed per VoiceRoute." ::= { vRoute 309 } vRouteSubroutesEntry OBJECT-TYPE SYNTAX VRouteSubroutesEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the vRouteSubroutesTable." INDEX { vRouteIndex, vRouteSubroutesValue } ::= { vRouteSubroutesTable 1 } VRouteSubroutesEntry ::= SEQUENCE { vRouteSubroutesValue Link, vRouteSubroutesRowStatus RowStatus } vRouteSubroutesValue OBJECT-TYPE SYNTAX Link ACCESS read-write STATUS mandatory DESCRIPTION "This variable represents both the value and the index for the vRouteSubroutesTable." ::= { vRouteSubroutesEntry 1 } vRouteSubroutesRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS write-only STATUS mandatory DESCRIPTION "This variable is used to control the addition and deletion of individual values of the vRouteSubroutesTable." ::= { vRouteSubroutesEntry 2 } vRouteDegradedSubroutesTable OBJECT-TYPE SYNTAX SEQUENCE OF VRouteDegradedSubroutesEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This attribute indicates all of the VoiceSubroutes that have at least one SwitchedVoiceService whose operationalState is disabled." ::= { vRoute 310 } vRouteDegradedSubroutesEntry OBJECT-TYPE SYNTAX VRouteDegradedSubroutesEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the vRouteDegradedSubroutesTable." INDEX { vRouteIndex, vRouteDegradedSubroutesValue } ::= { vRouteDegradedSubroutesTable 1 } VRouteDegradedSubroutesEntry ::= SEQUENCE { vRouteDegradedSubroutesValue RowPointer } vRouteDegradedSubroutesValue OBJECT-TYPE SYNTAX RowPointer ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents both the value and the index for the vRouteDegradedSubroutesTable." ::= { vRouteDegradedSubroutesEntry 1 } -- VRoute/n Debug -- The Debug component defines the debug operational characteristics -- of the VoiceRoute component. vRouteDebug OBJECT IDENTIFIER ::= { vRoute 2 } vRouteDebugRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF VRouteDebugRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of vRouteDebug components." ::= { vRouteDebug 1 } vRouteDebugRowStatusEntry OBJECT-TYPE SYNTAX VRouteDebugRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single vRouteDebug component." INDEX { vRouteIndex, vRouteDebugIndex } ::= { vRouteDebugRowStatusTable 1 } VRouteDebugRowStatusEntry ::= SEQUENCE { vRouteDebugRowStatus RowStatus, vRouteDebugComponentName DisplayString, vRouteDebugStorageType StorageType, vRouteDebugIndex NonReplicated } vRouteDebugRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of vRouteDebug components. These components cannot be added nor deleted." ::= { vRouteDebugRowStatusEntry 1 } vRouteDebugComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { vRouteDebugRowStatusEntry 2 } vRouteDebugStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the vRouteDebug tables." ::= { vRouteDebugRowStatusEntry 4 } vRouteDebugIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the vRouteDebug tables." ::= { vRouteDebugRowStatusEntry 10 } -- VoiceRoute/n Interface -- This component defines the interface between a voice route and a -- PBX. vRouteInterface OBJECT IDENTIFIER ::= { vRoute 3 } vRouteInterfaceRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF VRouteInterfaceRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of vRouteInterface components." ::= { vRouteInterface 1 } vRouteInterfaceRowStatusEntry OBJECT-TYPE SYNTAX VRouteInterfaceRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single vRouteInterface component." INDEX { vRouteIndex, vRouteInterfaceIndex } ::= { vRouteInterfaceRowStatusTable 1 } VRouteInterfaceRowStatusEntry ::= SEQUENCE { vRouteInterfaceRowStatus RowStatus, vRouteInterfaceComponentName DisplayString, vRouteInterfaceStorageType StorageType, vRouteInterfaceIndex NonReplicated } vRouteInterfaceRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of vRouteInterface components. These components cannot be added nor deleted." ::= { vRouteInterfaceRowStatusEntry 1 } vRouteInterfaceComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { vRouteInterfaceRowStatusEntry 2 } vRouteInterfaceStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the vRouteInterface tables." ::= { vRouteInterfaceRowStatusEntry 4 } vRouteInterfaceIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the vRouteInterface tables." ::= { vRouteInterfaceRowStatusEntry 10 } vRouteInterfaceProvTable OBJECT-TYPE SYNTAX SEQUENCE OF VRouteInterfaceProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains attributes specifying the interface to a PBX." ::= { vRouteInterface 10 } vRouteInterfaceProvEntry OBJECT-TYPE SYNTAX VRouteInterfaceProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the vRouteInterfaceProvTable." INDEX { vRouteIndex, vRouteInterfaceIndex } ::= { vRouteInterfaceProvTable 1 } VRouteInterfaceProvEntry ::= SEQUENCE { vRouteInterfaceIngressAudioGain INTEGER, vRouteInterfaceEgressAudioGain INTEGER, vRouteInterfaceTandemPassThrough INTEGER, vRouteInterfaceEchoCancellation INTEGER, vRouteInterfaceComfortNoiseCap INTEGER, vRouteInterfaceSpeechHangoverTime Unsigned32, vRouteInterfaceFaxHangoverTimeG711G726 Unsigned32, vRouteInterfaceModemFaxSpeechDiscrim INTEGER, vRouteInterfaceEchoTailDelay Unsigned32, vRouteInterfaceEchoReturnLoss Unsigned32, vRouteInterfaceEcanBypassMode INTEGER } vRouteInterfaceIngressAudioGain OBJECT-TYPE SYNTAX INTEGER (-12..12) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the gain in dB that is applied to data coming from outside the network before it is transferred across the network. It applies to voice, modem and fax traffic. For example, ingress gain is applied to audio data coming from a PBX. If ingressAudioGain is negative, a loss is applied. ingressAudioGain and egressAudioGain are used in loss planning, which is the configuration of the devices in a network to ensure that the signal level from any point in the network to any other point is correct. ingressAudioGain is ignored for calls on 1pDS1V and 1pE1V cards." DEFVAL { 0 } ::= { vRouteInterfaceProvEntry 1 } vRouteInterfaceEgressAudioGain OBJECT-TYPE SYNTAX INTEGER (-12..12) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the gain in dB that is applied to data leaving the network. It applies to voice, modem and fax traffic. For example, egress gain is applied to audio data going to a PBX. If egressAudioGain is negative, a loss is applied. ingressAudioGain and egressAudioGain are used in loss planning, which is the configuration of the devices in the network to ensure that the signal level from any point in the network to any other point is correct." DEFVAL { 0 } ::= { vRouteInterfaceProvEntry 2 } vRouteInterfaceTandemPassThrough OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies whether tandem pass through is desired. If tandemPassThrough is enabled, tandem pass through is used if possible. If tandemPassThrough is disabled, tandem pass through is not used under any circumstances. The actual state of tandem pass through is indicated in Vsr Svs Framer tptStatus. The negotiated tandem pass through is available in Vsr Svs Framer negotiatedTandemPassThrough. Tandem pass through is not supported on 1pDS1V and 1pE1V cards, so tandemPassThrough is ignored on these cards." DEFVAL { disabled } ::= { vRouteInterfaceProvEntry 3 } vRouteInterfaceEchoCancellation OBJECT-TYPE SYNTAX INTEGER { off(0), on(1) } ACCESS read-write STATUS obsolete DESCRIPTION "This attribute has been migrated to echoCancellation." DEFVAL { on } ::= { vRouteInterfaceProvEntry 5 } vRouteInterfaceComfortNoiseCap OBJECT-TYPE SYNTAX INTEGER (-78 | -65 | -60 | -54 | -52 | -50 | -48 | -46 | -44 | -42 | -40) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the maximum level at which comfort noise is generated. The comfort noise is limited by comfortNoiseCap before egressAudioGain is applied. The default value of -40 dBm0 equates to the maximum level of comfort noise available and effectively disables the comfortNoiseCap." DEFVAL { -40 } ::= { vRouteInterfaceProvEntry 6 } vRouteInterfaceSpeechHangoverTime OBJECT-TYPE SYNTAX Unsigned32 (10..500) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the time after the end of speech before silence suppression starts. It applies only to voice traffic. It is not used unless Vsr Svs Framer negotiatedSilenceSuppression is on, congested or slowAndCongested. Higher values of speechHangoverTime reduce undesirable clipping but increase bandwidth usage. speechHangoverTime is not used on DS1V, E1V, 1pDS1V, 1pE1V and J2MV cards." DEFVAL { 150 } ::= { vRouteInterfaceProvEntry 7 } vRouteInterfaceFaxHangoverTimeG711G726 OBJECT-TYPE SYNTAX Unsigned32 (300..20000) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the time after the end of fax traffic before G.711/G.726 fax idle suppression starts. It applies only if the negotiated fax encoding, available in Vsr Svs Framer negotiatedEncoding, is g711, g726 or g711G726 and Vsr Svs Framer negotiatedFisG711G726 is on. Higher values of faxHangoverTimeG711G726 reduce undesirable clipping but increase bandwidth usage. faxHangoverTimeG711G726 is not used on DS1V, E1V, 1pDS1V, 1pE1V and J2MV cards." DEFVAL { 1000 } ::= { vRouteInterfaceProvEntry 8 } vRouteInterfaceModemFaxSpeechDiscrim OBJECT-TYPE SYNTAX INTEGER { off(0), on(1) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies whether this VoiceRoute differentiates between modemFax traffic and speech. If modemFaxSpeechDiscrim is on and a false 2100 Hz tone is detected, any Svs using this route reverts to speech mode when speech is detected. modemFaxSpeechDiscrim is not used on DS1V, E1V, 1pDS1V, 1pE1V and J2MV cards." DEFVAL { on } ::= { vRouteInterfaceProvEntry 9 } vRouteInterfaceEchoTailDelay OBJECT-TYPE SYNTAX Unsigned32 (32 | 64) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the maximum echo canceller tail delay coverage. It should be selected higher than the summation of the round trip delay of echo and hybrid response time. A 32 msec setting is good for a radius of 2700 km, assuming that the signal is going through 4 exchanges and the hybrid response time is 6 msec. A 64 msec setting offers even greater coverage (more distance or more switches), with comparable convergence time. The recommended setting is 64 msec. This attribute is not used on DS1V, E1V, 1pDS1V, 1pE1V, J2MV, 1pE1Mvp, 1pDS1Mvp, or 1pTTC2mMvp card." DEFVAL { 64 } ::= { vRouteInterfaceProvEntry 10 } vRouteInterfaceEchoReturnLoss OBJECT-TYPE SYNTAX Unsigned32 (0 | 3 | 6) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the echo return loss parameter of the echo canceller. 0 db is the normal value for most line conditions. If the line quality is poor, in terms of echo, selecting a higher value may allow the echo canceller to perform better. A side effect is that the voice level is attenuated by the same amount, which may not always be acceptable. This attribute is not used on DS1V, E1V, 1pDS1V, 1pE1V, J2MV, 1pE1Mvp, 1pDS1Mvp, or 1pTTC2mMvp card." DEFVAL { 0 } ::= { vRouteInterfaceProvEntry 11 } vRouteInterfaceEcanBypassMode OBJECT-TYPE SYNTAX INTEGER { g164(0), g165(1), never(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies when version 2 internal echo cancellers are placed in bypass mode on this VoiceRoute. This attribute only applies if v2 of echoCancellation is on. If ecanBypassMode is g165, the internal echo canceller is placed in bypass mode as per ITU-T G.165. If ecanBypassMode is g164, the internal echo canceller is placed in bypass mode as per ITU-T G.164. If ecanBypassMode is never, the internal echo canceller is never placed in bypass mode. This mode should only be used for debugging. This attribute does not apply to 1pE1V, 1pDS1V, J2MV, 1pE1Mvp, 1pDS1Mvp or 1pTTC2mMvp cards." DEFVAL { g165 } ::= { vRouteInterfaceProvEntry 15 } vRouteInterfaceStructuredEchoCancellationTable OBJECT-TYPE SYNTAX SEQUENCE OF VRouteInterfaceStructuredEchoCancellationEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This attribute specifies whether echo cancellation is performed on this VoiceRoute. v1 specifies whether echo cancellation is performed by version 1 internal echo cancellers. v2 specifes whether echo cancellation is performed by version 2 echo cancellers. If echoCancellation is on, the internal echo canceller is enabled and echo cancellation is performed. If echoCancellation is off, the internal echo canceller is placed in transparent bypass mode and echo cancellation is never performed." ::= { vRouteInterface 472 } vRouteInterfaceStructuredEchoCancellationEntry OBJECT-TYPE SYNTAX VRouteInterfaceStructuredEchoCancellationEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the vRouteInterfaceStructuredEchoCancellationTable." INDEX { vRouteIndex, vRouteInterfaceIndex, vRouteInterfaceStructuredEchoCancellationIndex } ::= { vRouteInterfaceStructuredEchoCancellationTable 1 } VRouteInterfaceStructuredEchoCancellationEntry ::= SEQUENCE { vRouteInterfaceStructuredEchoCancellationIndex INTEGER, vRouteInterfaceStructuredEchoCancellationValue INTEGER } vRouteInterfaceStructuredEchoCancellationIndex OBJECT-TYPE SYNTAX INTEGER { v1(0), v2(1) } ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the vRouteInterfaceStructuredEchoCancellationTable specific index for the vRouteInterfaceStructuredEchoCancellationTable." ::= { vRouteInterfaceStructuredEchoCancellationEntry 1 } vRouteInterfaceStructuredEchoCancellationValue OBJECT-TYPE SYNTAX INTEGER { off(0), on(1) } ACCESS read-write STATUS mandatory DESCRIPTION "This variable represents an individual value for the vRouteInterfaceStructuredEchoCancellationTable." ::= { vRouteInterfaceStructuredEchoCancellationEntry 2 } -- vroute/n Dna -- This is the description of the VRoute Dna component. It offers a -- subset of the generic Dna component attributes. vRouteDna OBJECT IDENTIFIER ::= { vRoute 4 } vRouteDnaRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF VRouteDnaRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of vRouteDna components." ::= { vRouteDna 1 } vRouteDnaRowStatusEntry OBJECT-TYPE SYNTAX VRouteDnaRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single vRouteDna component." INDEX { vRouteIndex, vRouteDnaIndex } ::= { vRouteDnaRowStatusTable 1 } VRouteDnaRowStatusEntry ::= SEQUENCE { vRouteDnaRowStatus RowStatus, vRouteDnaComponentName DisplayString, vRouteDnaStorageType StorageType, vRouteDnaIndex NonReplicated } vRouteDnaRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of vRouteDna components. These components cannot be added nor deleted." ::= { vRouteDnaRowStatusEntry 1 } vRouteDnaComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { vRouteDnaRowStatusEntry 2 } vRouteDnaStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the vRouteDna tables." ::= { vRouteDnaRowStatusEntry 4 } vRouteDnaIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the vRouteDna tables." ::= { vRouteDnaRowStatusEntry 10 } vRouteDnaAddressTable OBJECT-TYPE SYNTAX SEQUENCE OF VRouteDnaAddressEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Address group contains attributes common to all Dna's. Every Dna used in the network is defined with this group of 2 attributes. String of address digits is complemented by type of address and Npi. These attributes are used to interpret format of the address digits." ::= { vRouteDna 10 } vRouteDnaAddressEntry OBJECT-TYPE SYNTAX VRouteDnaAddressEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the vRouteDnaAddressTable." INDEX { vRouteIndex, vRouteDnaIndex } ::= { vRouteDnaAddressTable 1 } VRouteDnaAddressEntry ::= SEQUENCE { vRouteDnaNumberingPlanIndicator INTEGER, vRouteDnaDataNetworkAddress DigitString } vRouteDnaNumberingPlanIndicator OBJECT-TYPE SYNTAX INTEGER { x121(0), e164(1) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute indicates the Numbering Plan Indicator (NPI) of the Dna that is entered. Address may belong to X.121 or E.164 plans. X.121 is used in packet svitched data networks." DEFVAL { e164 } ::= { vRouteDnaAddressEntry 1 } vRouteDnaDataNetworkAddress OBJECT-TYPE SYNTAX DigitString (SIZE (0..15)) ACCESS read-write STATUS mandatory DESCRIPTION "Dna attribute contains digits which form unique identifier of the customer interface. It can be compared (approximation only) to telephone number where phone number identifies unique telephone set. Dna digits are selected and assigned by network operators." ::= { vRouteDnaAddressEntry 2 } -- Vroute/n Dna/n hgm -- VnetHuntGroupMember is an optional component. It specifies the -- vroute/n as a member of a hunt group. Each hunt group member -- subscribes to at least one hunt group. The hunt group server's dna -- address should be added to the VnetHuntGroupAddress which is the -- sub-component of VnetHuntGroupMember. vRouteDnaHgm OBJECT IDENTIFIER ::= { vRouteDna 3 } vRouteDnaHgmRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF VRouteDnaHgmRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of vRouteDnaHgm components." ::= { vRouteDnaHgm 1 } vRouteDnaHgmRowStatusEntry OBJECT-TYPE SYNTAX VRouteDnaHgmRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single vRouteDnaHgm component." INDEX { vRouteIndex, vRouteDnaIndex, vRouteDnaHgmIndex } ::= { vRouteDnaHgmRowStatusTable 1 } VRouteDnaHgmRowStatusEntry ::= SEQUENCE { vRouteDnaHgmRowStatus RowStatus, vRouteDnaHgmComponentName DisplayString, vRouteDnaHgmStorageType StorageType, vRouteDnaHgmIndex NonReplicated } vRouteDnaHgmRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of vRouteDnaHgm components. These components can be added and deleted." ::= { vRouteDnaHgmRowStatusEntry 1 } vRouteDnaHgmComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { vRouteDnaHgmRowStatusEntry 2 } vRouteDnaHgmStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the vRouteDnaHgm tables." ::= { vRouteDnaHgmRowStatusEntry 4 } vRouteDnaHgmIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the vRouteDnaHgm tables." ::= { vRouteDnaHgmRowStatusEntry 10 } vRouteDnaHgmIfTable OBJECT-TYPE SYNTAX SEQUENCE OF VRouteDnaHgmIfEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the interface parameters between the HuntGroupMember and the Hunt Group server." ::= { vRouteDnaHgm 10 } vRouteDnaHgmIfEntry OBJECT-TYPE SYNTAX VRouteDnaHgmIfEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the vRouteDnaHgmIfTable." INDEX { vRouteIndex, vRouteDnaIndex, vRouteDnaHgmIndex } ::= { vRouteDnaHgmIfTable 1 } VRouteDnaHgmIfEntry ::= SEQUENCE { vRouteDnaHgmUsageDeltaUpdateThreshold Unsigned32 } vRouteDnaHgmUsageDeltaUpdateThreshold OBJECT-TYPE SYNTAX Unsigned32 (0..4096) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies by how much the availability of a hunt group member must change before the member's availability is updated to the hunt group server." DEFVAL { 1 } ::= { vRouteDnaHgmIfEntry 1 } vRouteDnaHgmOpTable OBJECT-TYPE SYNTAX SEQUENCE OF VRouteDnaHgmOpEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the operational attributes of the HuntGroupMember component." ::= { vRouteDnaHgm 11 } vRouteDnaHgmOpEntry OBJECT-TYPE SYNTAX VRouteDnaHgmOpEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the vRouteDnaHgmOpTable." INDEX { vRouteIndex, vRouteDnaIndex, vRouteDnaHgmIndex } ::= { vRouteDnaHgmOpTable 1 } VRouteDnaHgmOpEntry ::= SEQUENCE { vRouteDnaHgmMaxAvailableChannels Unsigned32, vRouteDnaHgmAvailableChannels Unsigned32, vRouteDnaHgmAvailabilityDelta INTEGER } vRouteDnaHgmMaxAvailableChannels OBJECT-TYPE SYNTAX Unsigned32 (0..4096) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the maximum number of available channels for this HuntGroupMember." ::= { vRouteDnaHgmOpEntry 1 } vRouteDnaHgmAvailableChannels OBJECT-TYPE SYNTAX Unsigned32 (0..4096) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the number of available channels reported to the hunt group in the Availability Message Packet (AMP). It is incremented by the application when a channel is freed and decremented when a channel is active." ::= { vRouteDnaHgmOpEntry 2 } vRouteDnaHgmAvailabilityDelta OBJECT-TYPE SYNTAX INTEGER (-4096..4096) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute specifies the delta between the actual availability of a hunt group member and the hunt group member's currentAvailability. Once the absolute value of this attribute reaches the usageDeltaUpdateThreshold, the currentAvailability of the hunt group member is then updated with the actual availability and the availabilityDelta is reset to 0. If this attribute is positive the number of available channels has increased since the last AMP was sent. If it is negative the number of available channels has decreased since the last AMP was sent." ::= { vRouteDnaHgmOpEntry 3 } -- Vroute/n Dna/n HgM HuntGroupAddress/n -- This component specifies the Hunt Group address to which this -- member belongs. A hunt group member belongs to at least one hunt -- group. vRouteDnaHgmHgAddr OBJECT IDENTIFIER ::= { vRouteDnaHgm 2 } vRouteDnaHgmHgAddrRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF VRouteDnaHgmHgAddrRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of vRouteDnaHgmHgAddr components." ::= { vRouteDnaHgmHgAddr 1 } vRouteDnaHgmHgAddrRowStatusEntry OBJECT-TYPE SYNTAX VRouteDnaHgmHgAddrRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single vRouteDnaHgmHgAddr component." INDEX { vRouteIndex, vRouteDnaIndex, vRouteDnaHgmIndex, vRouteDnaHgmHgAddrIndex } ::= { vRouteDnaHgmHgAddrRowStatusTable 1 } VRouteDnaHgmHgAddrRowStatusEntry ::= SEQUENCE { vRouteDnaHgmHgAddrRowStatus RowStatus, vRouteDnaHgmHgAddrComponentName DisplayString, vRouteDnaHgmHgAddrStorageType StorageType, vRouteDnaHgmHgAddrIndex Integer32 } vRouteDnaHgmHgAddrRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of vRouteDnaHgmHgAddr components. These components can be added and deleted." ::= { vRouteDnaHgmHgAddrRowStatusEntry 1 } vRouteDnaHgmHgAddrComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { vRouteDnaHgmHgAddrRowStatusEntry 2 } vRouteDnaHgmHgAddrStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the vRouteDnaHgmHgAddr tables." ::= { vRouteDnaHgmHgAddrRowStatusEntry 4 } vRouteDnaHgmHgAddrIndex OBJECT-TYPE SYNTAX Integer32 (0..1) ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the vRouteDnaHgmHgAddr tables." ::= { vRouteDnaHgmHgAddrRowStatusEntry 10 } vRouteDnaHgmHgAddrAddrTable OBJECT-TYPE SYNTAX SEQUENCE OF VRouteDnaHgmHgAddrAddrEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains DNA attributes common to all DNAs." ::= { vRouteDnaHgmHgAddr 10 } vRouteDnaHgmHgAddrAddrEntry OBJECT-TYPE SYNTAX VRouteDnaHgmHgAddrAddrEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the vRouteDnaHgmHgAddrAddrTable." INDEX { vRouteIndex, vRouteDnaIndex, vRouteDnaHgmIndex, vRouteDnaHgmHgAddrIndex } ::= { vRouteDnaHgmHgAddrAddrTable 1 } VRouteDnaHgmHgAddrAddrEntry ::= SEQUENCE { vRouteDnaHgmHgAddrNumberingPlanIndicator INTEGER, vRouteDnaHgmHgAddrDataNetworkAddress DigitString } vRouteDnaHgmHgAddrNumberingPlanIndicator OBJECT-TYPE SYNTAX INTEGER { x121(0), e164(1) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the Numbering Plan Indicator (NPI) of the Dna that is entered. The address may belong to the X.121 or E.164 numbering plans." DEFVAL { x121 } ::= { vRouteDnaHgmHgAddrAddrEntry 1 } vRouteDnaHgmHgAddrDataNetworkAddress OBJECT-TYPE SYNTAX DigitString (SIZE (1..15)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the digits that form the unique identifier of the customer interface. It can be compared to a telephone number where phone number identifies unique telephone set. Dna digits are selected and assigned by network operators." ::= { vRouteDnaHgmHgAddrAddrEntry 2 } -- Vroute/n VoiceAccounting -- The VoiceAccounting component defines the operational -- characteristics of the accounting system of the Vroute component. -- Accounting record generation for calls on the Vroute is managed by -- this component. vRouteAcct OBJECT IDENTIFIER ::= { vRoute 5 } vRouteAcctRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF VRouteAcctRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of vRouteAcct components." ::= { vRouteAcct 1 } vRouteAcctRowStatusEntry OBJECT-TYPE SYNTAX VRouteAcctRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single vRouteAcct component." INDEX { vRouteIndex, vRouteAcctIndex } ::= { vRouteAcctRowStatusTable 1 } VRouteAcctRowStatusEntry ::= SEQUENCE { vRouteAcctRowStatus RowStatus, vRouteAcctComponentName DisplayString, vRouteAcctStorageType StorageType, vRouteAcctIndex NonReplicated } vRouteAcctRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of vRouteAcct components. These components cannot be added nor deleted." ::= { vRouteAcctRowStatusEntry 1 } vRouteAcctComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { vRouteAcctRowStatusEntry 2 } vRouteAcctStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the vRouteAcct tables." ::= { vRouteAcctRowStatusEntry 4 } vRouteAcctIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the vRouteAcct tables." ::= { vRouteAcctRowStatusEntry 10 } vRouteAcctProvTable OBJECT-TYPE SYNTAX SEQUENCE OF VRouteAcctProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the provisionable attributes of a VoiceAccounting component." ::= { vRouteAcct 2 } vRouteAcctProvEntry OBJECT-TYPE SYNTAX VRouteAcctProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the vRouteAcctProvTable." INDEX { vRouteIndex, vRouteAcctIndex } ::= { vRouteAcctProvTable 1 } VRouteAcctProvEntry ::= SEQUENCE { vRouteAcctAccountCollection OCTET STRING, vRouteAcctAccountClass Unsigned32, vRouteAcctServiceExchange Unsigned32, vRouteAcctDigitsSuppressed Unsigned32, vRouteAcctAccountingOptions OCTET STRING } vRouteAcctAccountCollection OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies that accounting records are to be collected for the various reasons: bill, test, study, audit. The last of the parameters, force, specifies that accounting records are to be collected irrespective of other collection reasons. If none of these reasons is set, then accounting will be suppressed. Description of bits: bill(0) test(1) study(2) audit(3) force(4)" ::= { vRouteAcctProvEntry 2 } vRouteAcctAccountClass OBJECT-TYPE SYNTAX Unsigned32 (0..255) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the accounting class which is reserved for network operations usage. Its value is returned in the accounting record in the local and remote service type attributes. The use of this attribute is decided by the network operator." DEFVAL { 0 } ::= { vRouteAcctProvEntry 3 } vRouteAcctServiceExchange OBJECT-TYPE SYNTAX Unsigned32 (0..255) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies a user defined value, Data Service Exchange, as entered by the network operator and reported in the accounting record." DEFVAL { 0 } ::= { vRouteAcctProvEntry 4 } vRouteAcctDigitsSuppressed OBJECT-TYPE SYNTAX Unsigned32 (0..8) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the number of trailing digits which will be suppressed in the calledNumber in the accounting records. Each of the specified number of trailing digits are replaced with an 'X'. This option exists to satisfy privacy requirements in a number of countries." DEFVAL { 0 } ::= { vRouteAcctProvEntry 5 } vRouteAcctAccountingOptions OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies optional settings for the voice networking accounting system. The options are: suppressTerminatingEndRecords - setting this option suppresses the generation of accounting records at the destination node. This reduces the volume of accounting data. This option has local significance only. It only suppresses the generation of accounting records for calls received by this node. Description of bits: notused0(0) suppressTerminatingEndRecords(1)" ::= { vRouteAcctProvEntry 6 } -- VoiceSubroute/n -- A VoiceSubroute component defines the characteristics of the -- connection to a Private Branch Exchange (PBX). A VoiceSubroute -- is a collection of 64 kbit/s channels on the same physical DS1 or E1 -- interface. Typically there is one VoiceSubroute per physical link. vsr OBJECT IDENTIFIER ::= { components 117 } vsrRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF VsrRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of vsr components." ::= { vsr 1 } vsrRowStatusEntry OBJECT-TYPE SYNTAX VsrRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single vsr component." INDEX { vsrIndex } ::= { vsrRowStatusTable 1 } VsrRowStatusEntry ::= SEQUENCE { vsrRowStatus RowStatus, vsrComponentName DisplayString, vsrStorageType StorageType, vsrIndex Integer32 } vsrRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of vsr components. These components can be added and deleted." ::= { vsrRowStatusEntry 1 } vsrComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { vsrRowStatusEntry 2 } vsrStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the vsr tables." ::= { vsrRowStatusEntry 4 } vsrIndex OBJECT-TYPE SYNTAX Integer32 (1..255) ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the vsr tables." ::= { vsrRowStatusEntry 10 } vsrCidDataTable OBJECT-TYPE SYNTAX SEQUENCE OF VsrCidDataEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the attribute for a component's Customer Identifier (CID). Refer to the attribute description for a detailed explanation of CIDs." ::= { vsr 10 } vsrCidDataEntry OBJECT-TYPE SYNTAX VsrCidDataEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the vsrCidDataTable." INDEX { vsrIndex } ::= { vsrCidDataTable 1 } VsrCidDataEntry ::= SEQUENCE { vsrCustomerIdentifier Unsigned32 } vsrCustomerIdentifier OBJECT-TYPE SYNTAX Unsigned32 (0 | 1..8191) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute holds the Customer Identifier (CID). Every component has a CID. If a component has a cid attribute, the component's CID is the provisioned value of that attribute; otherwise the component inherits the CID of its parent. The top- level component has a CID of 0. Every operator session also has a CID, which is the CID provisioned for the operator's user ID. An operator will see only the stream data for components having a matching CID. Also, the operator will be allowed to issue commands for only those components which have a matching CID. An operator CID of 0 is used to identify the Network Manager (referred to as 'NetMan' in DPN). This CID matches the CID of any component. Values 1 to 8191 inclusive (equivalent to 'basic CIDs' in DPN) may be assigned to specific customers." DEFVAL { 0 } ::= { vsrCidDataEntry 1 } vsrIfEntryTable OBJECT-TYPE SYNTAX SEQUENCE OF VsrIfEntryEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the provisionable attributes for the ifEntry." ::= { vsr 11 } vsrIfEntryEntry OBJECT-TYPE SYNTAX VsrIfEntryEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the vsrIfEntryTable." INDEX { vsrIndex } ::= { vsrIfEntryTable 1 } VsrIfEntryEntry ::= SEQUENCE { vsrIfAdminStatus INTEGER, vsrIfIndex InterfaceIndex } vsrIfAdminStatus OBJECT-TYPE SYNTAX INTEGER { up(1), down(2), testing(3) } ACCESS read-write STATUS mandatory DESCRIPTION "The desired state of the interface. The up state indicates the interface is operational. The down state indicates the interface is not operational. The testing state indicates that no operational packets can be passed." DEFVAL { up } ::= { vsrIfEntryEntry 1 } vsrIfIndex OBJECT-TYPE SYNTAX InterfaceIndex (1..65535) ACCESS read-only STATUS mandatory DESCRIPTION "This is the index for the IfEntry. Its value is automatically initialized during the provisioning process." ::= { vsrIfEntryEntry 2 } vsrProvTable OBJECT-TYPE SYNTAX SEQUENCE OF VsrProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group represents the provisionable attributes of a VoiceSubroute." ::= { vsr 12 } vsrProvEntry OBJECT-TYPE SYNTAX VsrProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the vsrProvTable." INDEX { vsrIndex } ::= { vsrProvTable 1 } VsrProvEntry ::= SEQUENCE { vsrCommentText AsciiString, vsrVoiceRoute Link, vsrSignallingChannel Link } vsrCommentText OBJECT-TYPE SYNTAX AsciiString (SIZE (0..40)) ACCESS read-write STATUS mandatory DESCRIPTION "Use of this attribute is at the discretion of the system administrator. Typically, it specifies the name of the customer that is using this VoiceSubroute. Typical use of this attribute is to store customer name." ::= { vsrProvEntry 1 } vsrVoiceRoute OBJECT-TYPE SYNTAX Link ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the VoiceRoute component that this VoiceSubroute belongs to." ::= { vsrProvEntry 3 } vsrSignallingChannel OBJECT-TYPE SYNTAX Link ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the signalling channel to be used by the VoiceSubroute." ::= { vsrProvEntry 311 } vsrStateTable OBJECT-TYPE SYNTAX SEQUENCE OF VsrStateEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide." ::= { vsr 13 } vsrStateEntry OBJECT-TYPE SYNTAX VsrStateEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the vsrStateTable." INDEX { vsrIndex } ::= { vsrStateTable 1 } VsrStateEntry ::= SEQUENCE { vsrAdminState INTEGER, vsrOperationalState INTEGER, vsrUsageState INTEGER } vsrAdminState OBJECT-TYPE SYNTAX INTEGER { locked(0), unlocked(1), shuttingDown(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component." DEFVAL { unlocked } ::= { vsrStateEntry 1 } vsrOperationalState OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle." DEFVAL { disabled } ::= { vsrStateEntry 2 } vsrUsageState OBJECT-TYPE SYNTAX INTEGER { idle(0), active(1), busy(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time." DEFVAL { idle } ::= { vsrStateEntry 3 } vsrOperStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF VsrOperStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group includes the Operational Status attribute. This attribute defines the current operational state of this component." ::= { vsr 14 } vsrOperStatusEntry OBJECT-TYPE SYNTAX VsrOperStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the vsrOperStatusTable." INDEX { vsrIndex } ::= { vsrOperStatusTable 1 } VsrOperStatusEntry ::= SEQUENCE { vsrSnmpOperStatus INTEGER } vsrSnmpOperStatus OBJECT-TYPE SYNTAX INTEGER { up(1), down(2), testing(3) } ACCESS read-only STATUS mandatory DESCRIPTION "The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interface is not operational, thus unable to forward packets. testing state indicates that no operational packets can be passed." DEFVAL { up } ::= { vsrOperStatusEntry 1 } vsrStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF VsrStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group provides the operational statistics for the VoiceSubroute component." ::= { vsr 15 } vsrStatsEntry OBJECT-TYPE SYNTAX VsrStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the vsrStatsTable." INDEX { vsrIndex } ::= { vsrStatsTable 1 } VsrStatsEntry ::= SEQUENCE { vsrTotalCallsFromIf Counter32, vsrTotalFailedCallsFromIf Counter32, vsrInvalidNumberingPlanCalls Counter32, vsrAddressResolutionFailedCalls Counter32, vsrAddressIncompleteCalls Counter32, vsrPathAttributesNotMetCalls Counter32, vsrPathSetupTimeOutCalls Counter32, vsrCallsRejectedLocally Counter32, vsrCallsRejectedByFarEnd Counter32 } vsrTotalCallsFromIf OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the total number of calls that have been received by this VoiceSubroute from the PBX. The value wraps to zero when it reaches its maximum." ::= { vsrStatsEntry 1 } vsrTotalFailedCallsFromIf OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts indicates the total number of calls that have been received by this VoiceSubroute from the PBX which failed to be successfully routed through the subnet for various reasons. The value wraps to zero when it reaches its maximum." ::= { vsrStatsEntry 2 } vsrInvalidNumberingPlanCalls OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the calls from the interface for which the type of number and the numbering plan identification was not associated to an access code. The numbering plan types noAccessCode, accessCode1 and accessCode2 are provisioned in the VoiceRoute. Refer to NTP-241-7001-xxx for more information. The value wraps to zero when it reaches its maximum." ::= { vsrStatsEntry 3 } vsrAddressResolutionFailedCalls OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the calls from the interface which had dialled numbers that had no entry in the VoiceNetworkingCallServer data base. The value wraps to zero when it reaches its maximum." ::= { vsrStatsEntry 4 } vsrAddressIncompleteCalls OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the calls from the interface which had dialled numbers with insufficient digits to resolve to a unique entry in the VoiceNetworkingCallServer data base. The value wraps to zero when it reaches its maximum." ::= { vsrStatsEntry 5 } vsrPathAttributesNotMetCalls OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the calls from the interface for which a path to the end point could not be established based on the attributes specified in the VoiceProfile. The value wraps to zero when it reaches its maximum." ::= { vsrStatsEntry 6 } vsrPathSetupTimeOutCalls OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the calls from the interface for which a path to the end point could not be established due to a subnet path setup time-out. The value wraps to zero when it reaches its maximum." ::= { vsrStatsEntry 7 } vsrCallsRejectedLocally OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the calls from the interface which were rejected by the originating end because it was: 1) a data call on a voice only VoiceRoute, or 2) a voice call on a data only VoiceRoute, or 3) a data call to an end-point whose VoiceProfile prevents data calls from being made. The value wraps to zero when it reaches its maximum." ::= { vsrStatsEntry 8 } vsrCallsRejectedByFarEnd OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the calls from the interface which were rejected by the far-end. This rejection could be due to: 1) no free channels at the end-point, or 2) a voice call going to a data only VoiceRoute, or 3) a data call going to a voice only VoiceRoute, or 4) a signalling protocol incompatibility between end-points. The value wraps to zero when it reaches its maximum." ::= { vsrStatsEntry 9 } vsrOperTable OBJECT-TYPE SYNTAX SEQUENCE OF VsrOperEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group provides the operational attributes for the VoiceSubroute component." ::= { vsr 16 } vsrOperEntry OBJECT-TYPE SYNTAX VsrOperEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the vsrOperTable." INDEX { vsrIndex } ::= { vsrOperTable 1 } VsrOperEntry ::= SEQUENCE { vsrActiveChannels Counter32, vsrPeakActiveChannels Counter32, vsrActiveVoiceChannels Counter32, vsrActiveModemChannels Counter32, vsrActiveDataChannels Counter32, vsrPeakActiveVoiceChannels Counter32, vsrPeakActiveModemChannels Counter32, vsrPeakActiveDataChannels Counter32, vsrActiveFaxRelayChannels Gauge32, vsrActiveTptChannels Gauge32, vsrPeakActiveFaxRelayChannels Gauge32, vsrPeakActiveTptChannels Gauge32 } vsrActiveChannels OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the total number of B-channels that currently have active calls." ::= { vsrOperEntry 2 } vsrPeakActiveChannels OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the peak number of B-channels that were active during the previous polling period." ::= { vsrOperEntry 3 } vsrActiveVoiceChannels OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the number of B-channels that are currently carrying voice." ::= { vsrOperEntry 4 } vsrActiveModemChannels OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the number of B-channels that are currently active, where a 2100Hz tone was detected." ::= { vsrOperEntry 5 } vsrActiveDataChannels OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the number of B-channels that are currently active carrying data." ::= { vsrOperEntry 6 } vsrPeakActiveVoiceChannels OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the peak number of B-channels that were active carrying voice during the previous polling period." ::= { vsrOperEntry 7 } vsrPeakActiveModemChannels OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the peak number of active B-channels that a 2100Hz tone was detected during the previous polling period." ::= { vsrOperEntry 8 } vsrPeakActiveDataChannels OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the maximum number of B-channels that were active carrying data during the previous polling period." ::= { vsrOperEntry 9 } vsrActiveFaxRelayChannels OBJECT-TYPE SYNTAX Gauge32 (0..30) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the number of B-channels that are currently performing fax relay." ::= { vsrOperEntry 10 } vsrActiveTptChannels OBJECT-TYPE SYNTAX Gauge32 (0..32) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the number of B-channels that are currently performing tandem pass through." ::= { vsrOperEntry 11 } vsrPeakActiveFaxRelayChannels OBJECT-TYPE SYNTAX Gauge32 (0..30) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the peak number of B-channels that performed fax relay during the previous polling period." ::= { vsrOperEntry 12 } vsrPeakActiveTptChannels OBJECT-TYPE SYNTAX Gauge32 (0..30) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the peak number of B-channels that performed tandem pass through during the previous polling period." ::= { vsrOperEntry 13 } -- Vsr/n SwitchedVoiceService/n -- The SwitchedVoiceService component defines the operational -- characteristics of the connection to a Private Branch Exchange -- (PBX). One instance of this component must be required for each -- channel (that is, timeslot) which is part of the VoiceSubroute. vsrSvs OBJECT IDENTIFIER ::= { vsr 2 } vsrSvsRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF VsrSvsRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of vsrSvs components." ::= { vsrSvs 1 } vsrSvsRowStatusEntry OBJECT-TYPE SYNTAX VsrSvsRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single vsrSvs component." INDEX { vsrIndex, vsrSvsIndex } ::= { vsrSvsRowStatusTable 1 } VsrSvsRowStatusEntry ::= SEQUENCE { vsrSvsRowStatus RowStatus, vsrSvsComponentName DisplayString, vsrSvsStorageType StorageType, vsrSvsIndex Integer32 } vsrSvsRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of vsrSvs components. These components can be added and deleted." ::= { vsrSvsRowStatusEntry 1 } vsrSvsComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { vsrSvsRowStatusEntry 2 } vsrSvsStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the vsrSvs tables." ::= { vsrSvsRowStatusEntry 4 } vsrSvsIndex OBJECT-TYPE SYNTAX Integer32 (1..32) ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the vsrSvs tables." ::= { vsrSvsRowStatusEntry 10 } vsrSvsIfEntryTable OBJECT-TYPE SYNTAX SEQUENCE OF VsrSvsIfEntryEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the provisionable attributes for the ifEntry." ::= { vsrSvs 11 } vsrSvsIfEntryEntry OBJECT-TYPE SYNTAX VsrSvsIfEntryEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the vsrSvsIfEntryTable." INDEX { vsrIndex, vsrSvsIndex } ::= { vsrSvsIfEntryTable 1 } VsrSvsIfEntryEntry ::= SEQUENCE { vsrSvsIfAdminStatus INTEGER, vsrSvsIfIndex InterfaceIndex } vsrSvsIfAdminStatus OBJECT-TYPE SYNTAX INTEGER { up(1), down(2), testing(3) } ACCESS read-write STATUS mandatory DESCRIPTION "The desired state of the interface. The up state indicates the interface is operational. The down state indicates the interface is not operational. The testing state indicates that no operational packets can be passed." DEFVAL { up } ::= { vsrSvsIfEntryEntry 1 } vsrSvsIfIndex OBJECT-TYPE SYNTAX InterfaceIndex (1..65535) ACCESS read-only STATUS mandatory DESCRIPTION "This is the index for the IfEntry. Its value is automatically initialized during the provisioning process." ::= { vsrSvsIfEntryEntry 2 } vsrSvsOperTable OBJECT-TYPE SYNTAX SEQUENCE OF VsrSvsOperEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group provides the operational attributes for the SwitchedVoiceService component." ::= { vsrSvs 12 } vsrSvsOperEntry OBJECT-TYPE SYNTAX VsrSvsOperEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the vsrSvsOperTable." INDEX { vsrIndex, vsrSvsIndex } ::= { vsrSvsOperTable 1 } VsrSvsOperEntry ::= SEQUENCE { vsrSvsStatus INTEGER, vsrSvsProfileNumber Counter32, vsrSvsCallType INTEGER, vsrSvsCalledNumber DigitString, vsrSvsCallingNumber DigitString, vsrSvsClearCauseCode Hex } vsrSvsStatus OBJECT-TYPE SYNTAX INTEGER { idle(0), seized(1), answered(2), clearing(3), lockout(4), idleMaintenance(5) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the current state of the channel. idle means that there is no call currently active on this channel. seized means that the channel is currently setting up a call, but a connect message has not been received. answered means that a connect message has been received. clearing means that the call is being taken down. lockout means that due to glare or channel rejection, the channel is available for ingress calls only. That is, either the PBX and the Passport tried to seize the channel for a call at the same time (glare), or the PBX rejected the Passport seizure. idleMaintenance means that due to explicit channel maintenance messages, the channel is not available for egress calls. This can only happen when the protocol control places the channel into a maintenance state, and only happens if the Passport receives a message causing the channel state change such as the SERVICE maintenance message." ::= { vsrSvsOperEntry 1 } vsrSvsProfileNumber OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the VoiceProfile number that is being used for this call. If no call is active, then it displays the value of the last profile used." ::= { vsrSvsOperEntry 2 } vsrSvsCallType OBJECT-TYPE SYNTAX INTEGER { voice(0), data(1), modem(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the type of call that this channel is currently carrying. If no call is active, then it displays the value for the last call." ::= { vsrSvsOperEntry 3 } vsrSvsCalledNumber OBJECT-TYPE SYNTAX DigitString (SIZE (1..32)) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the dialled number that is active on this channel. If no call is active, then it displays the dialled number from the last call." ::= { vsrSvsOperEntry 4 } vsrSvsCallingNumber OBJECT-TYPE SYNTAX DigitString (SIZE (1..16)) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the originator's number for the currently active call. If no call is active, then it displays the originator's number from the last call." ::= { vsrSvsOperEntry 5 } vsrSvsClearCauseCode OBJECT-TYPE SYNTAX Hex (0..127) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the clear cause code of the call. This code is always the Q.931 code, regardless of the access protocol." ::= { vsrSvsOperEntry 6 } vsrSvsStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF VsrSvsStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group provides the operational attributes for the SwitchedVoiceService component." ::= { vsrSvs 13 } vsrSvsStatsEntry OBJECT-TYPE SYNTAX VsrSvsStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the vsrSvsStatsTable." INDEX { vsrIndex, vsrSvsIndex } ::= { vsrSvsStatsTable 1 } VsrSvsStatsEntry ::= SEQUENCE { vsrSvsTotalCalls Counter32, vsrSvsTotalCallSeconds Counter32 } vsrSvsTotalCalls OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the call attempts processed on this channel (in both directions). This counter includes the number of unsuccessful as well as successful call attempts. The value wraps when it reaches its maximum." ::= { vsrSvsStatsEntry 1 } vsrSvsTotalCallSeconds OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the total number of seconds that this channel is handling a call. This is regardless of whether the call is successful or not. In other words, this is the amount of time that the channel is not in the idle state. The value wraps when it reaches its maximum." ::= { vsrSvsStatsEntry 2 } vsrSvsStateTable OBJECT-TYPE SYNTAX SEQUENCE OF VsrSvsStateEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide." ::= { vsrSvs 14 } vsrSvsStateEntry OBJECT-TYPE SYNTAX VsrSvsStateEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the vsrSvsStateTable." INDEX { vsrIndex, vsrSvsIndex } ::= { vsrSvsStateTable 1 } VsrSvsStateEntry ::= SEQUENCE { vsrSvsAdminState INTEGER, vsrSvsOperationalState INTEGER, vsrSvsUsageState INTEGER } vsrSvsAdminState OBJECT-TYPE SYNTAX INTEGER { locked(0), unlocked(1), shuttingDown(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component." DEFVAL { unlocked } ::= { vsrSvsStateEntry 1 } vsrSvsOperationalState OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle." DEFVAL { disabled } ::= { vsrSvsStateEntry 2 } vsrSvsUsageState OBJECT-TYPE SYNTAX INTEGER { idle(0), active(1), busy(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time." DEFVAL { idle } ::= { vsrSvsStateEntry 3 } vsrSvsOperStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF VsrSvsOperStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group includes the Operational Status attribute. This attribute defines the current operational state of this component." ::= { vsrSvs 15 } vsrSvsOperStatusEntry OBJECT-TYPE SYNTAX VsrSvsOperStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the vsrSvsOperStatusTable." INDEX { vsrIndex, vsrSvsIndex } ::= { vsrSvsOperStatusTable 1 } VsrSvsOperStatusEntry ::= SEQUENCE { vsrSvsSnmpOperStatus INTEGER } vsrSvsSnmpOperStatus OBJECT-TYPE SYNTAX INTEGER { up(1), down(2), testing(3) } ACCESS read-only STATUS mandatory DESCRIPTION "The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interface is not operational, thus unable to forward packets. testing state indicates that no operational packets can be passed." DEFVAL { up } ::= { vsrSvsOperStatusEntry 1 } -- Vsr/n Svs/n Framer -- The Framer component controls link layer framing for application -- components sending and receiving data on a link interface. It is also -- through Framer, that an application component is associated with a -- specific hardware link interface. -- The Framer component provides provisionable attributes related to -- datapath aspects of the hardware interface rather than interface -- specific attributes (such as modem leads and clocking) which are -- associated with specific hardware components (such as E1 or DS1). -- The Framer component also provides a provisionable attribute -- which binds the application component to a specific hardware -- component. -- The Framer component contains operational attributes for link -- interface datapath statistics (such as frame counts). vsrSvsFramer OBJECT IDENTIFIER ::= { vsrSvs 2 } vsrSvsFramerRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF VsrSvsFramerRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of vsrSvsFramer components." ::= { vsrSvsFramer 1 } vsrSvsFramerRowStatusEntry OBJECT-TYPE SYNTAX VsrSvsFramerRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single vsrSvsFramer component." INDEX { vsrIndex, vsrSvsIndex, vsrSvsFramerIndex } ::= { vsrSvsFramerRowStatusTable 1 } VsrSvsFramerRowStatusEntry ::= SEQUENCE { vsrSvsFramerRowStatus RowStatus, vsrSvsFramerComponentName DisplayString, vsrSvsFramerStorageType StorageType, vsrSvsFramerIndex NonReplicated } vsrSvsFramerRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of vsrSvsFramer components. These components cannot be added nor deleted." ::= { vsrSvsFramerRowStatusEntry 1 } vsrSvsFramerComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { vsrSvsFramerRowStatusEntry 2 } vsrSvsFramerStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the vsrSvsFramer tables." ::= { vsrSvsFramerRowStatusEntry 4 } vsrSvsFramerIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the vsrSvsFramer tables." ::= { vsrSvsFramerRowStatusEntry 10 } vsrSvsFramerProvTable OBJECT-TYPE SYNTAX SEQUENCE OF VsrSvsFramerProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the base provisioning data for the Framer component. Application or hardware interface specific provisioning data is contained in other provisionable Framer groups." ::= { vsrSvsFramer 10 } vsrSvsFramerProvEntry OBJECT-TYPE SYNTAX VsrSvsFramerProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the vsrSvsFramerProvTable." INDEX { vsrIndex, vsrSvsIndex, vsrSvsFramerIndex } ::= { vsrSvsFramerProvTable 1 } VsrSvsFramerProvEntry ::= SEQUENCE { vsrSvsFramerInterfaceName Link } vsrSvsFramerInterfaceName OBJECT-TYPE SYNTAX Link ACCESS read-write STATUS mandatory DESCRIPTION "This attribute contains a hardware component name. The attribute associates the application with a specific link. This defines the module processor on which Framer's parent component (as well as Framer itself) will run." ::= { vsrSvsFramerProvEntry 1 } vsrSvsFramerStateTable OBJECT-TYPE SYNTAX SEQUENCE OF VsrSvsFramerStateEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide." ::= { vsrSvsFramer 14 } vsrSvsFramerStateEntry OBJECT-TYPE SYNTAX VsrSvsFramerStateEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the vsrSvsFramerStateTable." INDEX { vsrIndex, vsrSvsIndex, vsrSvsFramerIndex } ::= { vsrSvsFramerStateTable 1 } VsrSvsFramerStateEntry ::= SEQUENCE { vsrSvsFramerAdminState INTEGER, vsrSvsFramerOperationalState INTEGER, vsrSvsFramerUsageState INTEGER } vsrSvsFramerAdminState OBJECT-TYPE SYNTAX INTEGER { locked(0), unlocked(1), shuttingDown(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component." DEFVAL { unlocked } ::= { vsrSvsFramerStateEntry 1 } vsrSvsFramerOperationalState OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle." DEFVAL { disabled } ::= { vsrSvsFramerStateEntry 2 } vsrSvsFramerUsageState OBJECT-TYPE SYNTAX INTEGER { idle(0), active(1), busy(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time." DEFVAL { idle } ::= { vsrSvsFramerStateEntry 3 } vsrSvsFramerStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF VsrSvsFramerStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the operational statistics data for a Framer component." ::= { vsrSvsFramer 15 } vsrSvsFramerStatsEntry OBJECT-TYPE SYNTAX VsrSvsFramerStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the vsrSvsFramerStatsTable." INDEX { vsrIndex, vsrSvsIndex, vsrSvsFramerIndex } ::= { vsrSvsFramerStatsTable 1 } VsrSvsFramerStatsEntry ::= SEQUENCE { vsrSvsFramerTotalCells Unsigned32, vsrSvsFramerAudioCells Unsigned32, vsrSvsFramerSilenceCells Unsigned32, vsrSvsFramerModemCells Unsigned32, vsrSvsFramerCurrentEncodingRate INTEGER, vsrSvsFramerLrcErrors Unsigned32, vsrSvsFramerFrmLostInNetwork Unsigned32, vsrSvsFramerFrmUnderRuns Unsigned32, vsrSvsFramerFrmDumped Unsigned32, vsrSvsFramerModemSilenceCells Counter32, vsrSvsFramerCurrentEncoding INTEGER, vsrSvsFramerTptStatus INTEGER, vsrSvsFramerFaxRelayCells Counter32, vsrSvsFramerModemFaxCells Unsigned32, vsrSvsFramerFaxIdleCells Counter32 } vsrSvsFramerTotalCells OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the total number of cells received from the interface. Each cell contains 44 bytes of data from the DS0 channel. Since a DS0 provides data at 64 kbit/s, each cell contains 5.5 ms of audio data. This data flow is measured before compression is performed on the channel. This counter wraps to zero after reaching its maximum value." ::= { vsrSvsFramerStatsEntry 1 } vsrSvsFramerAudioCells OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the total number of cells containing audio data received from the interface while the channel was seized. A CCS channel is always considered to be seized. Audio data includes cells containing voice as well modem audio, but not silence. A cell contains 44 bytes of data from the DS0 channel(5.5 ms). This flow is measured before compression is performed on the channel. This counter wraps to zero after reaching its maximum value." ::= { vsrSvsFramerStatsEntry 2 } vsrSvsFramerSilenceCells OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the total number of cells containing silence data received from the interface which was not forwarded into the network, thus saving bandwidth. A channel may go into silence due to the operation of the silence suppression feature or for CAS channels when the ABCD signalling bits go idle. A cell contains 44 bytes of data from the DS0 channel(5.5 ms). This flow is measured before compression is performed on the channel. This counter wraps to zero after reaching its maximum value." ::= { vsrSvsFramerStatsEntry 4 } vsrSvsFramerModemCells OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) ACCESS read-only STATUS obsolete DESCRIPTION "This attribute is migrated into modemFaxCells." ::= { vsrSvsFramerStatsEntry 5 } vsrSvsFramerCurrentEncodingRate OBJECT-TYPE SYNTAX INTEGER { n640(1), n320(2), n240(3), n160(4), n80(5), n144(6), n120(7), n96(8), n72(9), n63(10), n53(11), n48(12), n24(13), n12(14), n03(15) } ACCESS read-only STATUS obsolete DESCRIPTION "This attribute has been migrated to currentRate in Operational group." ::= { vsrSvsFramerStatsEntry 6 } vsrSvsFramerLrcErrors OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the number of frames received from the network with LRC errors." ::= { vsrSvsFramerStatsEntry 7 } vsrSvsFramerFrmLostInNetwork OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the number of frames which the service knows it did not receive from the network although they were sent in to the network from the far end." ::= { vsrSvsFramerStatsEntry 8 } vsrSvsFramerFrmUnderRuns OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the number of times that a frame was needed but was not available because it had been delayed too long in the network. This error may occur repeatedly if the interface clocks at the two access points to the network are operating at different rates." ::= { vsrSvsFramerStatsEntry 9 } vsrSvsFramerFrmDumped OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the number of frames which have been dumped because the output queue grew too large. This can occur if the clock rate on the incoming interface is faster than the clock rate on the outgoing interface and there are no silence periods to absorb the difference, or when a compression rate change occurs. This count wraps to zero after reaching its maximum value." ::= { vsrSvsFramerStatsEntry 10 } vsrSvsFramerModemSilenceCells OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS obsolete DESCRIPTION "This attribute is migrated into faxIdleCells." ::= { vsrSvsFramerStatsEntry 26 } vsrSvsFramerCurrentEncoding OBJECT-TYPE SYNTAX INTEGER { g729(1), g728(2), g723(3), g726(4), g711(5), v22(32), v22bis(33), faxRelay(64), v27(65), v29(66), v17(67), none(255) } ACCESS read-only STATUS obsolete DESCRIPTION "This attribute has been migrated to currentEncoding in Operational group." ::= { vsrSvsFramerStatsEntry 27 } vsrSvsFramerTptStatus OBJECT-TYPE SYNTAX INTEGER { operating(0), rejected(1), monitoring(2), disabled(3) } ACCESS read-only STATUS obsolete DESCRIPTION "This attribute has been migrated to tptStatus in Operational group." ::= { vsrSvsFramerStatsEntry 28 } vsrSvsFramerFaxRelayCells OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the total number of fax relay cells sent to the network. This counter wraps to zero after reaching its maximum value." ::= { vsrSvsFramerStatsEntry 35 } vsrSvsFramerModemFaxCells OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the total number of cells containing modem data received from the interface while the channel was seized. A CCS channel is always considered to be seized. Cells are considered to be modem data if a constant energy level above -25 dBmO is detected for more than 900 ms. An energy level below -36 dBmO for more than 650 ms is required to detect that the modem is no longer present. A cell contains 44 bytes of data from the DS0 channel (5.5 ms). This flow is measured before compression is performed on the channel. This counter wraps to zero after reaching its maximum value." ::= { vsrSvsFramerStatsEntry 36 } vsrSvsFramerFaxIdleCells OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the total number of cells containing silent fax data received from the interface which were not forwarded into the network, thus saving bandwidth. A channel may go into silence due to the silence Suppression feature or for CAS channels when the ABCD signalling bits go idle. A cell contains 44 bytes of data from the DS0 channel (5.5 ms). This flow is measured before compression is performed on the channel. This counter wraps to zero after reaching its maximum value." ::= { vsrSvsFramerStatsEntry 37 } vsrSvsFramerOperTable OBJECT-TYPE SYNTAX SEQUENCE OF VsrSvsFramerOperEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the operational data for a Svs Framer." ::= { vsrSvsFramer 16 } vsrSvsFramerOperEntry OBJECT-TYPE SYNTAX VsrSvsFramerOperEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the vsrSvsFramerOperTable." INDEX { vsrIndex, vsrSvsIndex, vsrSvsFramerIndex } ::= { vsrSvsFramerOperTable 1 } VsrSvsFramerOperEntry ::= SEQUENCE { vsrSvsFramerOpCurrentEncoding INTEGER, vsrSvsFramerCurrentRate INTEGER, vsrSvsFramerOpTptStatus INTEGER } vsrSvsFramerOpCurrentEncoding OBJECT-TYPE SYNTAX INTEGER { g729(1), g728(2), g723(3), g726(4), g711(5), v22(32), v22bis(33), faxRelay(64), v27(65), v29(66), v17(67), none(255) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the encoding currently being performed on this channel. g711 indicates that pulse code modulation (PCM) defined by ITU-T G.711 is being performed. g726 indicates that adaptive differential pulse code modulation (ADPCM) defined by ITU-T G.726 is being performed. g728 indicates that the Low Delay Coded Excited Linear Predictive Coder (LD-CELP) algorithm defined by ITU-T G.728 is being performed. g729 indicates that the Conjunctive Structure Algebraic Code Excited Linear Predictive Coder (CS-ACELP) algorithm defined by ITU-T G.729 is being performed. v27 indicates that the algorithm defined by ITU-T V.27 is being performed. v29 indicates that the algorithm defined by ITU-T V.29 is being performed." ::= { vsrSvsFramerOperEntry 1 } vsrSvsFramerCurrentRate OBJECT-TYPE SYNTAX INTEGER { n0(0), n640(1), n320(2), n240(3), n160(4), n80(5), n144(6), n120(7), n96(8), n72(9), n63(10), n53(11), n48(12), n24(13), n12(14), n03(15) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the current encoding rate for frames being sent to the network." ::= { vsrSvsFramerOperEntry 2 } vsrSvsFramerOpTptStatus OBJECT-TYPE SYNTAX INTEGER { operating(0), monitoring(2), disabled(3) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the current status of the tandem pass through algorithm. If tptStatus is operating, the tandem pass through algorithm is cutting through a voice switch. If tptStatus is monitoring, negotiatedTandemPassThrough is enabled, but the tandem pass through algorithm is not cutting through a voice switch. If tptStatus is disabled, negotiatedTandemPassThrough is disabled." ::= { vsrSvsFramerOperEntry 3 } vsrSvsFramerNegTable OBJECT-TYPE SYNTAX SEQUENCE OF VsrSvsFramerNegEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the attributes indicating the results of voice networking end to end negotiation." ::= { vsrSvsFramer 17 } vsrSvsFramerNegEntry OBJECT-TYPE SYNTAX VsrSvsFramerNegEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the vsrSvsFramerNegTable." INDEX { vsrIndex, vsrSvsIndex, vsrSvsFramerIndex } ::= { vsrSvsFramerNegTable 1 } VsrSvsFramerNegEntry ::= SEQUENCE { vsrSvsFramerNegotiatedSilenceSuppression INTEGER, vsrSvsFramerNegotiatedFisG711G726 INTEGER, vsrSvsFramerNegotiatedDtmfRegeneration INTEGER, vsrSvsFramerNegotiatedV17AsG711G726 INTEGER, vsrSvsFramerNegotiatedTandemPassThrough INTEGER } vsrSvsFramerNegotiatedSilenceSuppression OBJECT-TYPE SYNTAX INTEGER { off(0), on(1), congested(2), slow(3), slowAndCongested(4) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute indicates the result of negotiating silence suppression with the remote end across the subnet. The parameter used for negotiating with the remote end is provisioned in Vncs Vp silenceSuppression. If negotiatedSilenceSuppression is off, silence suppression is never performed. If negotiatedSilenceSuppression is on, silence suppression is always performed. If negotiatedSilenceSuppression is congested, silence suppression is performed only when the network is congested. If negotiatedSilenceSuppression is slow, silence suppression begins after 10 to 20 seconds without any speech or audio being detected. If negotiatedSilenceSuppression is slowAndCongested, both the slow and congested options are applied." ::= { vsrSvsFramerNegEntry 1 } vsrSvsFramerNegotiatedFisG711G726 OBJECT-TYPE SYNTAX INTEGER { off(0), on(1) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute indicates the result of negotiating G.711/G.726 fax idle suppression with the remote end across the subnet. The parameter used for negotiating with the remote end is provisioned in Vncs Vp faxIdleSuppressionG711G726." ::= { vsrSvsFramerNegEntry 2 } vsrSvsFramerNegotiatedDtmfRegeneration OBJECT-TYPE SYNTAX INTEGER { off(0), on(1) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute indicates the result of negotiating DTMF regeneration with the remote end across the subnet. The parameter used for negotiating with the remote end is provisioned in Vncs Vp dtmfRegeneration. If negotiatedDtmfRegeneration is on, DTMF tones received from the link are first converted to digits before being sent to the subnet. When a digit is received from the subnet, its respective DTMF tone is generated before being sent to the link. If negotiatedDtmfRegeneration is off, DTMF tones are transported transparently." ::= { vsrSvsFramerNegEntry 3 } vsrSvsFramerNegotiatedV17AsG711G726 OBJECT-TYPE SYNTAX INTEGER { no(0), yes(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates how this SwitchedVoiceService negotiates with V.17 fax machines, as determined by negotiation with the remote end across the subnet. The parameter used for negotiating with the remote end is provisioned in Vncs Vp v17EncodedAsG711G726. If negotiatedV17AsG711G726 is no, V.17 fax machines are instructed to use V.29, and V.29 fax traffic sent by fax machines is demodulated and encoded using fax relay. If negotiatedV17AsG711G726 is yes, V.17 fax machines are permitted to use V.17 and V.17 fax traffic sent by fax machines is encoded using G.711 or G.726, at the rates given in negotiatedRates." ::= { vsrSvsFramerNegEntry 4 } vsrSvsFramerNegotiatedTandemPassThrough OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the result of negotiating tandem pass through with the remote end across the subnet. The parameter used for negotiating with the remote end is provisioned in Vncs Vp tandemPassThrough." ::= { vsrSvsFramerNegEntry 5 } vsrSvsFramerFrmToNetworkTable OBJECT-TYPE SYNTAX SEQUENCE OF VsrSvsFramerFrmToNetworkEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This attribute counts the number of frames sent to the network at each encoding rate. Fax relay cells are not included." ::= { vsrSvsFramer 315 } vsrSvsFramerFrmToNetworkEntry OBJECT-TYPE SYNTAX VsrSvsFramerFrmToNetworkEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the vsrSvsFramerFrmToNetworkTable." INDEX { vsrIndex, vsrSvsIndex, vsrSvsFramerIndex, vsrSvsFramerFrmToNetworkIndex } ::= { vsrSvsFramerFrmToNetworkTable 1 } VsrSvsFramerFrmToNetworkEntry ::= SEQUENCE { vsrSvsFramerFrmToNetworkIndex INTEGER, vsrSvsFramerFrmToNetworkValue Unsigned32 } vsrSvsFramerFrmToNetworkIndex OBJECT-TYPE SYNTAX INTEGER { n64KbitS(0), n32KbitS(1), n24KbitS(2), n16KbitS(3), n8KbitS(4) } ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the vsrSvsFramerFrmToNetworkTable specific index for the vsrSvsFramerFrmToNetworkTable." ::= { vsrSvsFramerFrmToNetworkEntry 1 } vsrSvsFramerFrmToNetworkValue OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents an individual value for the vsrSvsFramerFrmToNetworkTable." ::= { vsrSvsFramerFrmToNetworkEntry 2 } vsrSvsFramerFrmFromNetworkTable OBJECT-TYPE SYNTAX SEQUENCE OF VsrSvsFramerFrmFromNetworkEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This attribute counts the number of frames received from the network at each encoding rate." ::= { vsrSvsFramer 316 } vsrSvsFramerFrmFromNetworkEntry OBJECT-TYPE SYNTAX VsrSvsFramerFrmFromNetworkEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the vsrSvsFramerFrmFromNetworkTable." INDEX { vsrIndex, vsrSvsIndex, vsrSvsFramerIndex, vsrSvsFramerFrmFromNetworkIndex } ::= { vsrSvsFramerFrmFromNetworkTable 1 } VsrSvsFramerFrmFromNetworkEntry ::= SEQUENCE { vsrSvsFramerFrmFromNetworkIndex INTEGER, vsrSvsFramerFrmFromNetworkValue Unsigned32 } vsrSvsFramerFrmFromNetworkIndex OBJECT-TYPE SYNTAX INTEGER { n64KbitS(0), n32KbitS(1), n24KbitS(2), n16KbitS(3), n8KbitS(4) } ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the vsrSvsFramerFrmFromNetworkTable specific index for the vsrSvsFramerFrmFromNetworkTable." ::= { vsrSvsFramerFrmFromNetworkEntry 1 } vsrSvsFramerFrmFromNetworkValue OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents an individual value for the vsrSvsFramerFrmFromNetworkTable." ::= { vsrSvsFramerFrmFromNetworkEntry 2 } vsrSvsFramerNEncodingTable OBJECT-TYPE SYNTAX SEQUENCE OF VsrSvsFramerNEncodingEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This attribute indicates the results of negotiating audio call encodings for voice, modemFax and fax traffic with the remote end across the subnet. The parameters used for negotiating with the remote end are provisioned in Vncs Vp voiceEncodingChoice and Vncs Vp modemFaxEncodingChoice. voice traffic is all traffic from the start of a call or speech until a 2100 Hz tone or call release. modemFax traffic is all traffic after a 2100 Hz tone but before a fax preamble, speech or call release. fax traffic is all traffic after a fax preamble but before speech or call release. g711 indicates that pulse code modulation (PCM) defined by ITU-T G.711 is the negotiated encoding. g726 indicates that Adaptive Differential Pulse Code Modulation (ADPCM) defined by ITU-T G.726 is the negotiated encoding. g711G726 indicates that pulse code modulation (PCM) defined by ITU-T G.711 and Adaptive Differential Pulse Code Modulation (ADPCM) defined by ITU-T G.726 are both negotiated encodings. If negotiatedEncoding is g711G726, the actual encoding performed can be either G.711 or G.726, depending on network congestion. g728 indicates that Low Delay Coded Excited Linear Predictive Coder (CS-ACELP) defined by ITU-T G.728 is the negotiated encoding. g729 indicates that Conjunctive Structure Algebraic Code Excited Linear Predictive Coder (CS-ACELP) defined by ITU-T G.729 is the negotiated encoding. v29V27Relay indicates that fax relay using ITU-T V.27 or ITU-T V.29 is the negotiated encoding. v17V29V27Relay indicates that fax relay using ITU-T V.17, ITU-T V.27, or ITU-T V.29 is the negotiated encoding. If all negotiated encodings are none, the negotiation of audio call encodings is not complete." ::= { vsrSvsFramer 467 } vsrSvsFramerNEncodingEntry OBJECT-TYPE SYNTAX VsrSvsFramerNEncodingEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the vsrSvsFramerNEncodingTable." INDEX { vsrIndex, vsrSvsIndex, vsrSvsFramerIndex, vsrSvsFramerNEncodingIndex } ::= { vsrSvsFramerNEncodingTable 1 } VsrSvsFramerNEncodingEntry ::= SEQUENCE { vsrSvsFramerNEncodingIndex INTEGER, vsrSvsFramerNEncodingValue INTEGER } vsrSvsFramerNEncodingIndex OBJECT-TYPE SYNTAX INTEGER { voice(0), modemFax(1), fax(2) } ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the vsrSvsFramerNEncodingTable specific index for the vsrSvsFramerNEncodingTable." ::= { vsrSvsFramerNEncodingEntry 1 } vsrSvsFramerNEncodingValue OBJECT-TYPE SYNTAX INTEGER { g729(1), g728(2), g726(4), g711(5), g711G726(31), v29V27Relay(64), v17V29V27Relay(68), none(255) } ACCESS read-write STATUS mandatory DESCRIPTION "This variable represents an individual value for the vsrSvsFramerNEncodingTable." ::= { vsrSvsFramerNEncodingEntry 2 } vsrSvsFramerNRatesTable OBJECT-TYPE SYNTAX SEQUENCE OF VsrSvsFramerNRatesEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This attribute indicates the results of negotiating minimum and maximum rates for voice, modemFax and fax traffic with the remote end across the subnet. The parameters used for negotiating with the remote end are provisioned in Vncs Vp voiceRates and Vncs Vp modemFaxRates." ::= { vsrSvsFramer 479 } vsrSvsFramerNRatesEntry OBJECT-TYPE SYNTAX VsrSvsFramerNRatesEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the vsrSvsFramerNRatesTable." INDEX { vsrIndex, vsrSvsIndex, vsrSvsFramerIndex, vsrSvsFramerNRatesTrafficIndex, vsrSvsFramerNRatesRateIndex } ::= { vsrSvsFramerNRatesTable 1 } VsrSvsFramerNRatesEntry ::= SEQUENCE { vsrSvsFramerNRatesTrafficIndex INTEGER, vsrSvsFramerNRatesRateIndex INTEGER, vsrSvsFramerNRatesValue INTEGER } vsrSvsFramerNRatesTrafficIndex OBJECT-TYPE SYNTAX INTEGER { voice(0), modemFax(1), fax(2) } ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the next to last index for the vsrSvsFramerNRatesTable." ::= { vsrSvsFramerNRatesEntry 1 } vsrSvsFramerNRatesRateIndex OBJECT-TYPE SYNTAX INTEGER { min(0), max(1) } ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the final index for the vsrSvsFramerNRatesTable." ::= { vsrSvsFramerNRatesEntry 2 } vsrSvsFramerNRatesValue OBJECT-TYPE SYNTAX INTEGER { n00(0), n03(1), n12(2), n24(3), n48(4), n72(5), n96(6), n120(7), n144(8), n80(66), n160(67), n240(68), n320(69), n640(70) } ACCESS read-write STATUS mandatory DESCRIPTION "This variable represents an individual value for the vsrSvsFramerNRatesTable." ::= { vsrSvsFramerNRatesEntry 3 } -- Vsr/m Svs/n Framer VfpDebug -- This component contains debugging attributes for a voice service -- running on a DS1V, E1V, 1pDS1V, 1pE1V or J2MV functional -- processor. vsrSvsFramerVfpDebug OBJECT IDENTIFIER ::= { vsrSvsFramer 5 } vsrSvsFramerVfpDebugRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF VsrSvsFramerVfpDebugRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of vsrSvsFramerVfpDebug components." ::= { vsrSvsFramerVfpDebug 1 } vsrSvsFramerVfpDebugRowStatusEntry OBJECT-TYPE SYNTAX VsrSvsFramerVfpDebugRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single vsrSvsFramerVfpDebug component." INDEX { vsrIndex, vsrSvsIndex, vsrSvsFramerIndex, vsrSvsFramerVfpDebugIndex } ::= { vsrSvsFramerVfpDebugRowStatusTable 1 } VsrSvsFramerVfpDebugRowStatusEntry ::= SEQUENCE { vsrSvsFramerVfpDebugRowStatus RowStatus, vsrSvsFramerVfpDebugComponentName DisplayString, vsrSvsFramerVfpDebugStorageType StorageType, vsrSvsFramerVfpDebugIndex NonReplicated } vsrSvsFramerVfpDebugRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of vsrSvsFramerVfpDebug components. These components cannot be added nor deleted." ::= { vsrSvsFramerVfpDebugRowStatusEntry 1 } vsrSvsFramerVfpDebugComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { vsrSvsFramerVfpDebugRowStatusEntry 2 } vsrSvsFramerVfpDebugStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the vsrSvsFramerVfpDebug tables." ::= { vsrSvsFramerVfpDebugRowStatusEntry 4 } vsrSvsFramerVfpDebugIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the vsrSvsFramerVfpDebug tables." ::= { vsrSvsFramerVfpDebugRowStatusEntry 10 } -- Vsr/m Svs/n Framer MvpDebug -- This component contains debugging attributes on a voice service's -- framer running on a 1pE1Mvp, 1pDS1Mvp or 1pTTC2mMvp -- functional processor. vsrSvsFramerMvpDebug OBJECT IDENTIFIER ::= { vsrSvsFramer 6 } vsrSvsFramerMvpDebugRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF VsrSvsFramerMvpDebugRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of vsrSvsFramerMvpDebug components." ::= { vsrSvsFramerMvpDebug 1 } vsrSvsFramerMvpDebugRowStatusEntry OBJECT-TYPE SYNTAX VsrSvsFramerMvpDebugRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single vsrSvsFramerMvpDebug component." INDEX { vsrIndex, vsrSvsIndex, vsrSvsFramerIndex, vsrSvsFramerMvpDebugIndex } ::= { vsrSvsFramerMvpDebugRowStatusTable 1 } VsrSvsFramerMvpDebugRowStatusEntry ::= SEQUENCE { vsrSvsFramerMvpDebugRowStatus RowStatus, vsrSvsFramerMvpDebugComponentName DisplayString, vsrSvsFramerMvpDebugStorageType StorageType, vsrSvsFramerMvpDebugIndex NonReplicated } vsrSvsFramerMvpDebugRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of vsrSvsFramerMvpDebug components. These components cannot be added nor deleted." ::= { vsrSvsFramerMvpDebugRowStatusEntry 1 } vsrSvsFramerMvpDebugComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { vsrSvsFramerMvpDebugRowStatusEntry 2 } vsrSvsFramerMvpDebugStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the vsrSvsFramerMvpDebug tables." ::= { vsrSvsFramerMvpDebugRowStatusEntry 4 } vsrSvsFramerMvpDebugIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the vsrSvsFramerMvpDebug tables." ::= { vsrSvsFramerMvpDebugRowStatusEntry 10 } -- Vsr/n Svs/m Framer PcmCapture -- This component contains attributes for PCM data capture. vsrSvsFramerPcmCapture OBJECT IDENTIFIER ::= { vsrSvsFramer 7 } vsrSvsFramerPcmCaptureRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF VsrSvsFramerPcmCaptureRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of vsrSvsFramerPcmCapture components." ::= { vsrSvsFramerPcmCapture 1 } vsrSvsFramerPcmCaptureRowStatusEntry OBJECT-TYPE SYNTAX VsrSvsFramerPcmCaptureRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single vsrSvsFramerPcmCapture component." INDEX { vsrIndex, vsrSvsIndex, vsrSvsFramerIndex, vsrSvsFramerPcmCaptureIndex } ::= { vsrSvsFramerPcmCaptureRowStatusTable 1 } VsrSvsFramerPcmCaptureRowStatusEntry ::= SEQUENCE { vsrSvsFramerPcmCaptureRowStatus RowStatus, vsrSvsFramerPcmCaptureComponentName DisplayString, vsrSvsFramerPcmCaptureStorageType StorageType, vsrSvsFramerPcmCaptureIndex NonReplicated } vsrSvsFramerPcmCaptureRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of vsrSvsFramerPcmCapture components. These components cannot be added nor deleted." ::= { vsrSvsFramerPcmCaptureRowStatusEntry 1 } vsrSvsFramerPcmCaptureComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { vsrSvsFramerPcmCaptureRowStatusEntry 2 } vsrSvsFramerPcmCaptureStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the vsrSvsFramerPcmCapture tables." ::= { vsrSvsFramerPcmCaptureRowStatusEntry 4 } vsrSvsFramerPcmCaptureIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the vsrSvsFramerPcmCapture tables." ::= { vsrSvsFramerPcmCaptureRowStatusEntry 10 } -- ...Lc -- This component contains all of the operation attributes for a Path -- Oriented Logical Connection. vsrSvsLCo OBJECT IDENTIFIER ::= { vsrSvs 3 } vsrSvsLCoRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF VsrSvsLCoRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of vsrSvsLCo components." ::= { vsrSvsLCo 1 } vsrSvsLCoRowStatusEntry OBJECT-TYPE SYNTAX VsrSvsLCoRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single vsrSvsLCo component." INDEX { vsrIndex, vsrSvsIndex, vsrSvsLCoIndex } ::= { vsrSvsLCoRowStatusTable 1 } VsrSvsLCoRowStatusEntry ::= SEQUENCE { vsrSvsLCoRowStatus RowStatus, vsrSvsLCoComponentName DisplayString, vsrSvsLCoStorageType StorageType, vsrSvsLCoIndex NonReplicated } vsrSvsLCoRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of vsrSvsLCo components. These components cannot be added nor deleted." ::= { vsrSvsLCoRowStatusEntry 1 } vsrSvsLCoComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { vsrSvsLCoRowStatusEntry 2 } vsrSvsLCoStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the vsrSvsLCo tables." ::= { vsrSvsLCoRowStatusEntry 4 } vsrSvsLCoIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the vsrSvsLCo tables." ::= { vsrSvsLCoRowStatusEntry 10 } vsrSvsLCoPathDataTable OBJECT-TYPE SYNTAX SEQUENCE OF VsrSvsLCoPathDataEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains all operational attributes for the path oriented LCo." ::= { vsrSvsLCo 10 } vsrSvsLCoPathDataEntry OBJECT-TYPE SYNTAX VsrSvsLCoPathDataEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the vsrSvsLCoPathDataTable." INDEX { vsrIndex, vsrSvsIndex, vsrSvsLCoIndex } ::= { vsrSvsLCoPathDataTable 1 } VsrSvsLCoPathDataEntry ::= SEQUENCE { vsrSvsLCoState INTEGER, vsrSvsLCoOverrideRemoteName AsciiString, vsrSvsLCoEnd INTEGER, vsrSvsLCoCostMetric Unsigned32, vsrSvsLCoDelayMetric Unsigned32, vsrSvsLCoRoundTripDelay Unsigned32, vsrSvsLCoSetupPriority Unsigned32, vsrSvsLCoHoldingPriority Unsigned32, vsrSvsLCoRequiredTxBandwidth Gauge32, vsrSvsLCoRequiredRxBandwidth Gauge32, vsrSvsLCoRequiredTrafficType INTEGER, vsrSvsLCoPermittedTrunkTypes OCTET STRING, vsrSvsLCoRequiredSecurity Unsigned32, vsrSvsLCoRequiredCustomerParameter Unsigned32, vsrSvsLCoEmissionPriority Unsigned32, vsrSvsLCoDiscardPriority Unsigned32, vsrSvsLCoPathType INTEGER, vsrSvsLCoRetryCount Unsigned32, vsrSvsLCoPathFailureCount Unsigned32, vsrSvsLCoReasonForNoRoute INTEGER, vsrSvsLCoLastTearDownReason INTEGER, vsrSvsLCoPathFailureAction INTEGER, vsrSvsLCoBumpPreference INTEGER, vsrSvsLCoOptimization INTEGER, vsrSvsLCoPathUpDateTime EnterpriseDateAndTime } vsrSvsLCoState OBJECT-TYPE SYNTAX INTEGER { pathDown(0), selectingRoute(1), connecting(2), pathUp(3), pathDownRetrying(4) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute reflects the current state of the connection. The pathDown state indicates a connection that has no remote end provisioned or the application has not yet signalled for a path. The selectingRoute state occurs when a request has been sent to route selector and it has not yet responded. The connectingState occurs while a path is being established. The pathUp state is the normal operational state of a path. The pathDownRetrying state indicates a path that attempted route selection but received no route and is now waiting to retry route selection again." ::= { vsrSvsLCoPathDataEntry 1 } vsrSvsLCoOverrideRemoteName OBJECT-TYPE SYNTAX AsciiString (SIZE (0..40)) ACCESS read-write STATUS mandatory DESCRIPTION "If set and the current PLC remoteName is blank this remoteName will override the blank PLC remoteName. Usually you would set this attribute and then lock/unlock the service component which will result in this new overrideRemoteName being used as if it had been provisioned into the PLC remoteName. The advantage of this attribute is that the connection's remoteName can be changed immediately without having to 'activate prov' but the disadvantage is that the overrideRemoteName is not permanent and if the card or switch is reset the override will be lost." ::= { vsrSvsLCoPathDataEntry 2 } vsrSvsLCoEnd OBJECT-TYPE SYNTAX INTEGER { calling(0), called(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute identifies whether this is the calling or called end of the path." ::= { vsrSvsLCoPathDataEntry 3 } vsrSvsLCoCostMetric OBJECT-TYPE SYNTAX Unsigned32 (0..65535) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute gives the route's total cost metric. It is calculated as the sum of the cost metric of all trunks in the path at the time the connection was established. The cost metric of a trunk is defined by the trunkCost attribute of the Trunk component. The costMetric for an LCo that is originated and terminated on the same module is 0." ::= { vsrSvsLCoPathDataEntry 4 } vsrSvsLCoDelayMetric OBJECT-TYPE SYNTAX Unsigned32 (0..100000) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute gives the total delay of the route as the one way delay for a 512 byte packet. It is calculated as the sum of the delays of all trunks in the path stored in topology at the time the connection was established. The delay for an LCo that is originated and terminated on the same module is 0." ::= { vsrSvsLCoPathDataEntry 5 } vsrSvsLCoRoundTripDelay OBJECT-TYPE SYNTAX Unsigned32 (0..200000) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute contains the time taken for a packet (cell) of 44 bytes to be transmitted to the remote LCo and return to this LCo. The number reported is given in milliseconds to the nearest millisecond. A value of one millisecond is reported if the time is less than 1 millisecond even though the delay may be less than 1 Millisecond when the LCo is originated and terminated on the same module." ::= { vsrSvsLCoPathDataEntry 6 } vsrSvsLCoSetupPriority OBJECT-TYPE SYNTAX Unsigned32 (0..4) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute gives the priority at which the current path is established. Zero is the highest priority and four is the lowest. The holdingPriority, a complementary attribute of this component, indicates the priority a path maintains once it is established." ::= { vsrSvsLCoPathDataEntry 7 } vsrSvsLCoHoldingPriority OBJECT-TYPE SYNTAX Unsigned32 (0..4) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute gives the priority at which a path holds its current path once the path is established. Zero is the highest priority and four is the lowest. The setupPriority, a complementary attribute, indicates the priority of a path at establishment time." ::= { vsrSvsLCoPathDataEntry 8 } vsrSvsLCoRequiredTxBandwidth OBJECT-TYPE SYNTAX Gauge32 (0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute gives the actual bandwidth (in bits per second) reserved by this path on each of the trunks of its route. This attribute represents the bandwidth for traffic outgoing to the remote end point. The originating end of the connection determines this value." ::= { vsrSvsLCoPathDataEntry 9 } vsrSvsLCoRequiredRxBandwidth OBJECT-TYPE SYNTAX Gauge32 (0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute gives the actual bandwidth (in bits per second) reserved by this path on each of trunks of its route. This attribute represents the bandwidth for traffic incoming from the remote end point. The originating end of the connection determines this value" ::= { vsrSvsLCoPathDataEntry 10 } vsrSvsLCoRequiredTrafficType OBJECT-TYPE SYNTAX INTEGER { voice(0), data(1), video(2), trafficType1(3), trafficType2(4), trafficType3(5), trafficType4(6), trafficType5(7) } ACCESS read-only STATUS mandatory DESCRIPTION "This operational attribute indicates the type of traffic transmitted over the path. There are eight possible traffic types, and the path can transmit only one of them. The originating end of the connection determines the type. These are arbitrary designations for traffic type. The voice, data and video traffic types are defined, and five other arbitrary traffic types can be defined by the network administration. This attribute is used in the route selection process to restrict the route to trunks that support this traffic type. The supportedTrafficType trunk attribute lists all the types of traffic allowed on the trunk. For example, if requiredTrafficType is specified as trafficType1 then only trunks that include trafficType1 in supportedTrafficType, will be candidates for this connection." ::= { vsrSvsLCoPathDataEntry 11 } vsrSvsLCoPermittedTrunkTypes OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1)) ACCESS read-only STATUS mandatory DESCRIPTION "This operational attribute lists up to eight types of trunk that can be used on the route. The originating end of the connection determines the types. The terrestrial and satellite trunk types have been defined, leaving six remaining arbitrary types that can be defined by the network administration. The trunk's type is indicated in the trunkType attribute of the Trunk component. When selecting a route, PORS only chooses trunks whose trunkType are in the permittedTrunkTypes for the path. Description of bits: terrestrial(0) satellite(1) trunkType1(2) trunkType2(3) trunkType3(4) trunkType4(5) trunkType5(6) trunkType6(7)" ::= { vsrSvsLCoPathDataEntry 12 } vsrSvsLCoRequiredSecurity OBJECT-TYPE SYNTAX Unsigned32 (0..7) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the required minimum level of security of the trunks on the route. Zero represents the most secure and seven represents the least secure. The trunk's security is indicated by the trunkSecurity attribute of the Trunk component, and has values identical in range and meaning to the requiredSecurity attribute. PORS ensures that any route selected does not contain a trunk whose trunkSecurity attribute is numerically greater than the requiredSecurity." ::= { vsrSvsLCoPathDataEntry 13 } vsrSvsLCoRequiredCustomerParameter OBJECT-TYPE SYNTAX Unsigned32 (0..7) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the allowed customer defined parameter of the trunks on the route.The originating end of the connection determines the customer defined parameter. Its value, a number from zero to seven, is chosen by a network administration to have a meaning specific to their network, thus allowing them to customize the use of their trunks. A complementary trunk attribute, customerParameter, also has a value from zero to seven. The route selection process does not consider trunks whose customerParameter is greater than the requiredCustomerParameter of the path." ::= { vsrSvsLCoPathDataEntry 14 } vsrSvsLCoEmissionPriority OBJECT-TYPE SYNTAX Unsigned32 (0..2) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the urgency with which packets on the path are emitted by the trunks on the route. The originating end of the connection selects the emissionPriority. EmissionPriority of zero indicates the highest emission priority, while two indicates the lowest emission priority. Packets with a higher emissionPriority (or numerically less) are serviced and sent out before the packets of lower emissionPriority (or numerically higher)." ::= { vsrSvsLCoPathDataEntry 15 } vsrSvsLCoDiscardPriority OBJECT-TYPE SYNTAX Unsigned32 (1..3) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the importance of the packets on the path.The originating end of the connection sets discardPriority. One is used for paths carrying the most important traffic, and three is used for paths carrying the least important traffic. Packets with lower discardPriority(numerically lower) are discarded after packets with a higher discardPriority(numerically higher)." ::= { vsrSvsLCoPathDataEntry 16 } vsrSvsLCoPathType OBJECT-TYPE SYNTAX INTEGER { normal(0), manual(1), forced(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates whether the path for this PLC was determined automatically or by static provisioning. Normal pathTypes are selected automatically by Route Selector.The other pathTypes are both manual pathTypes where the operator must specify, through provisioning, a static route termed the manualPath. A manual pathType connection is nearly identical to a normal path type connection with the exception that the route is pre-provisioned. For a manual pathType, bandwidth reservations are respected along the path exactly as in a normal path. The last type, the forced pathType, is also a manual path but regardless of the bandwidth available the route is granted provided the trunks are operational and there are sufficient Logical Channels (LChs). The forced pathType could result in over committing the reserved bandwidth allowed on a trunk. A better way to achieve the effects of a forced pathType is to use a manual pathType with setupPriority = 0 and holdingPriority = 0. In this manner the path will reserve correct bandwidth and it will bump other paths if required while not being bumped itself." ::= { vsrSvsLCoPathDataEntry 17 } vsrSvsLCoRetryCount OBJECT-TYPE SYNTAX Unsigned32 (0..255) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute is the count of the number of times the path chosen during route selection could not be instantiated. This count should be three or below if the network is performing adequately. A high value indicates that the route selection is often performed using an out-of-date view of available network bandwidth and/or topology. This attribute will only increase at the calling end of the connection. This attribute is reset each time a path reconnects and stops counting when it reaches its maximum value." ::= { vsrSvsLCoPathDataEntry 18 } vsrSvsLCoPathFailureCount OBJECT-TYPE SYNTAX Unsigned32 (0..65535) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute is the count of the number of times the path has successfully connected. It is set to zero the first time the path is up. If a path fails anytime after connecting this count will be incremented when the path is up again. Failed route requests do not count in this statistic. See retryCount above. This attribute stops counting at its maximum value." ::= { vsrSvsLCoPathDataEntry 19 } vsrSvsLCoReasonForNoRoute OBJECT-TYPE SYNTAX INTEGER { none(0), destinationNameTooLong(1), destinationNotSpecified(2), unknownDestinationName(3), incorrectDestination(4), incorrectDestinationEndPoint(5), unknownSource(6), unknownDestination(7), sameNode(8), routeCostTooMuch(9), routesDelayTooLong(10), attributesNotMet(11), anError(12), attributeProfileProblem(13), manualPathIndexProblem(14) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute is the route selection's reasonForNoRoute and provides a brief reason for which a route was not selected. The reasons are essentially self-explanatory. Perhaps two reasons for no route require some explanation. The reason unknownRemoteNodeName is issued when the remote node name is not in the topological database. The reason plcAttributesNotMet is issued when there is no network connectivity at a level specified by the PLC attributes. This reason is also issued when there is no physical connectivity between two end nodes." DEFVAL { none } ::= { vsrSvsLCoPathDataEntry 20 } vsrSvsLCoLastTearDownReason OBJECT-TYPE SYNTAX INTEGER { none(0), normalShutDown(1), insufficientTxLcOrBandwidth(2), insufficientRxLcOrBandwidth(3), trunkFailure(4), trunkCardFailure(5), operatorForced(6), lostLcnClash(7), networkCongestion(8), trunkNotFound(9), farEndNotFound(10), wrongModuleReached(11), farEndBusy(12), callLoopedBack(13), unknownReason(14), farEndNotReady(15), remoteNameMismatch(16), serviceTypeMismatch(17), reconnectFromFarEnd(18), bumped(19), accessCardFailure(20), optimized(21), overrideRemoteName(22), trunkOrFarEndDidNotSupportMode(23) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute reflects the last tear down reason for a connection (LCo). In many cases this displays the reason for a momentary service interruption. This attribute applies to the last path failure only. If a path is no longer up, this may give an indication to the reason that the path has failed. In many cases an alarm will also be generated with more specific information. The following is a brief description of the reasons: none - This path has no information for the teardown this is typical of a path provisioned with no remoteName that has not been up. normalShutDown - This path has gone down due to normal call termination. insufficientTxLcOrBandwidth - At present there is either no available bandwidth or logical channel numbers available on one or more of the trunks for this path in the transmit direction. insufficientRxLcOrBandwidth - At present there is either no available bandwidth or logical channel numbers available on one or more of the trunks for this path in the receive direction. trunkFailure- A trunk on the path has failed or has gone down due to a provisioning change of a critical attribute. trunkCardFailure- A trunk FP card has failed along the path. accessCardFailure- The FP on which the peer access service was running has failed. operatorForced- The path has terminated due to the operator locking a trunk along the path. lostLcnClash- The path has terminated because the PA's at both ends of an intermediate trunk have allocated the same LC to different calls. When this happens both calls must go down and then try to come up again a fraction of a second later (effectively ensuring that they will now be assigned different LC's). It is normal to get the odd clash especially when the PA's usedLC is approaching the PA's maxLC. networkCongestion - The path has failed due to control information being lost and not recoverable. trunkNotFound - Occurs on a manual path usually. Check for trunks not up or names provisioned incorrectly. farEndNotFound - The far end is not provisioned or is not up. Check remote Name. wrongModuleReached - This may occur on a manual path. Check provisioning for correct trunk and service names. For a normal path, the network Topology may be changing check remoteName. farEndBusy - The far end has been reached but it is busy. Check remoteName and remote end provisioning. callLoopedBack - This LCo is provisioned to call itself. Re- provision since this is invalid. unknownReason - The failure was not resolved. farEndNotReady - The remote end was reached but the connection was refused due to the remote end not being enabled. remoteNameMismatch - The remote end has alarmed and rejected this setup due to remoteName provisioning. serviceTypeMismatch - The remote Service Type does not match this service type. Check provisioning. reconnectFromFarEnd - The remote end re-established this connection. Check the remote end lastTearDownReason to determine the real reason. bumped - Another call bumped this path from a trunk to get bandwidth (or an LC) which it required to come up. This other path had a higher setupPriority than this path's holdingPriority hence it was allowed to steal the bandwidth (or LC) from this path. optimized - This call has been rerouted due to the optimization feature. The call is still active this just indicates why the path changed. trunkOrFarEndDidNotSupportMode - This call was unable to complete because a mode required by the service was not supported by one of the trunks the route went through or by the far end service it connected to. Currently the only mode that this applies to is the map/mux mode on TRUNK PA ATM component. Map mode was required by the application (CES/FrAtm etc.) but was not available on the TRUNK PA ATM component through which the call was routed or the far end CES/FrAtm component did not specify the same mode." DEFVAL { none } ::= { vsrSvsLCoPathDataEntry 21 } vsrSvsLCoPathFailureAction OBJECT-TYPE SYNTAX INTEGER { disconnectConnection(0), reRoutePath(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays whether the application is set to tolerate momentary interruption of a path while a new path is selected. If disconnectConnection is displayed, the application is informed as soon as possible about a failure by disconnection. If the attribute displays reRoutePath, the path may attempt an immediate reroute, provided the failure is a recoverable failure. If rerouting fails the application is informed of the failure. With this option set to reRoutePath the LCo may wait up to 30 seconds before informing the service of complete disconnection in order to allow both ends to attempt to reconnect. Note that if PLC components are different at both ends only the calling end is allowed to reconnect. All pathTypes respect this attribute. Also on a manualPath with both ends provisioned with independent paths (at least with respect to the failure) this option will have the desired effect that the path is rerouted without complete disconnection at both ends" ::= { vsrSvsLCoPathDataEntry 22 } vsrSvsLCoBumpPreference OBJECT-TYPE SYNTAX INTEGER { bumpWhenNecessary(0), bumpToObtainBestRoute(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute specifies when bumping will occur during route selection process. Bumping may occur when necessary or always. It will be necessary for a connection to bump if there is not enough resources for the connection to be established and these resources are occupied by a connection whose setupPriority is lower (numerically higher) than the connection's setupPriority. A connection may also always bump in order to obtain the best route." ::= { vsrSvsLCoPathDataEntry 23 } vsrSvsLCoOptimization OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute is used to specify whether this connection should attempt to optimize its path when requested by the routing PORS component. Every path is as optimal as it can be when it is established, but as network traffic patterns and configurations change this path may no longer be as optimal as it could be. The PORS connection manager on a module requests circuits to optimize at the optimization interval." ::= { vsrSvsLCoPathDataEntry 24 } vsrSvsLCoPathUpDateTime OBJECT-TYPE SYNTAX EnterpriseDateAndTime (SIZE (0 | 19)) ACCESS read-only STATUS mandatory DESCRIPTION "This is the time stamp when the current path was established or reestablished." ::= { vsrSvsLCoPathDataEntry 25 } vsrSvsLCoStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF VsrSvsLCoStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the operational statistics attributes for the path oriented LCo." ::= { vsrSvsLCo 11 } vsrSvsLCoStatsEntry OBJECT-TYPE SYNTAX VsrSvsLCoStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the vsrSvsLCoStatsTable." INDEX { vsrIndex, vsrSvsIndex, vsrSvsLCoIndex } ::= { vsrSvsLCoStatsTable 1 } VsrSvsLCoStatsEntry ::= SEQUENCE { vsrSvsLCoPktsToNetwork PassportCounter64, vsrSvsLCoBytesToNetwork PassportCounter64, vsrSvsLCoPktsFromNetwork PassportCounter64, vsrSvsLCoBytesFromNetwork PassportCounter64 } vsrSvsLCoPktsToNetwork OBJECT-TYPE SYNTAX PassportCounter64 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the number of packets transmitted to the network over this Logical Connection." ::= { vsrSvsLCoStatsEntry 1 } vsrSvsLCoBytesToNetwork OBJECT-TYPE SYNTAX PassportCounter64 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the number of bytes sent to the network over this Logical Connection." ::= { vsrSvsLCoStatsEntry 2 } vsrSvsLCoPktsFromNetwork OBJECT-TYPE SYNTAX PassportCounter64 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the number of packets received from the remote LCo via the network." ::= { vsrSvsLCoStatsEntry 3 } vsrSvsLCoBytesFromNetwork OBJECT-TYPE SYNTAX PassportCounter64 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the number of bytes received from the remote LCo via the network." ::= { vsrSvsLCoStatsEntry 4 } vsrSvsLCoPathTable OBJECT-TYPE SYNTAX SEQUENCE OF VsrSvsLCoPathEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This attribute contains the trunk component names over which the path has been instantiated and the remote end point name terminating the path." ::= { vsrSvsLCo 264 } vsrSvsLCoPathEntry OBJECT-TYPE SYNTAX VsrSvsLCoPathEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the vsrSvsLCoPathTable." INDEX { vsrIndex, vsrSvsIndex, vsrSvsLCoIndex, vsrSvsLCoPathValue } ::= { vsrSvsLCoPathTable 1 } VsrSvsLCoPathEntry ::= SEQUENCE { vsrSvsLCoPathValue AsciiString } vsrSvsLCoPathValue OBJECT-TYPE SYNTAX AsciiString (SIZE (0..40)) ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents both the value and the index for the vsrSvsLCoPathTable." ::= { vsrSvsLCoPathEntry 1 } -- Vsr/n Svs/n Debug -- The Debug component defines the debug operational characteristics -- of the svs component. vsrSvsDebug OBJECT IDENTIFIER ::= { vsrSvs 4 } vsrSvsDebugRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF VsrSvsDebugRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of vsrSvsDebug components." ::= { vsrSvsDebug 1 } vsrSvsDebugRowStatusEntry OBJECT-TYPE SYNTAX VsrSvsDebugRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single vsrSvsDebug component." INDEX { vsrIndex, vsrSvsIndex, vsrSvsDebugIndex } ::= { vsrSvsDebugRowStatusTable 1 } VsrSvsDebugRowStatusEntry ::= SEQUENCE { vsrSvsDebugRowStatus RowStatus, vsrSvsDebugComponentName DisplayString, vsrSvsDebugStorageType StorageType, vsrSvsDebugIndex NonReplicated } vsrSvsDebugRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of vsrSvsDebug components. These components cannot be added nor deleted." ::= { vsrSvsDebugRowStatusEntry 1 } vsrSvsDebugComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { vsrSvsDebugRowStatusEntry 2 } vsrSvsDebugStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the vsrSvsDebug tables." ::= { vsrSvsDebugRowStatusEntry 4 } vsrSvsDebugIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the vsrSvsDebug tables." ::= { vsrSvsDebugRowStatusEntry 10 } -- Vsr/n Debug -- The Debug component defines the debug operational characteristics -- of the VoiceSubroute component. There are three main areas of -- interest, the VoiceSubroute itself, the call state machines (CSM), -- and the call channel manager (CCM). -- These debug groups can be reached by typing: -- d Vsr/n debug -- d Vsr/n debug sr -- d Vsr/n debug csm -- d Vsr/n debug ccm vsrDebug OBJECT IDENTIFIER ::= { vsr 3 } vsrDebugRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF VsrDebugRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of vsrDebug components." ::= { vsrDebug 1 } vsrDebugRowStatusEntry OBJECT-TYPE SYNTAX VsrDebugRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single vsrDebug component." INDEX { vsrIndex, vsrDebugIndex } ::= { vsrDebugRowStatusTable 1 } VsrDebugRowStatusEntry ::= SEQUENCE { vsrDebugRowStatus RowStatus, vsrDebugComponentName DisplayString, vsrDebugStorageType StorageType, vsrDebugIndex NonReplicated } vsrDebugRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of vsrDebug components. These components cannot be added nor deleted." ::= { vsrDebugRowStatusEntry 1 } vsrDebugComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { vsrDebugRowStatusEntry 2 } vsrDebugStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the vsrDebug tables." ::= { vsrDebugRowStatusEntry 4 } vsrDebugIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the vsrDebug tables." ::= { vsrDebugRowStatusEntry 10 } -- -- Version and Compliance statements -- -- Object-Group Statement: -- A list of all current accessible leaf objects. -- OBJECTS { vsrVoiceRoute, -- vsrAdminState, -- vRouteInterfaceStructuredEchoCancellationValue, -- vsrSvsFramerVfpDebugStorageType, -- vsrSvsLCoOptimization, -- vsrIfAdminStatus, -- sigChanOperationalState, -- sigChanICmapNoSuchChannelCause, -- vsrCustomerIdentifier, -- vsrSvsLCoLastTearDownReason, -- sigChanBchVsrInstance, -- vsrSvsFramerPcmCaptureStorageType, -- vRouteInterfaceFaxHangoverTimeG711G726, -- vsrSvsLCoRequiredSecurity, -- vsrSvsLCoPathFailureCount, -- vsrSvsFramerModemFaxCells, -- sigChanGwUnsupportedConversions, -- vRouteDnaNumberingPlanIndicator, -- vRouteDiallingPlan2, -- vsrSvsSnmpOperStatus, -- sigChanICmapComponentName, -- vsrInvalidNumberingPlanCalls, -- sigChanNcasRowStatus, -- vsrSvsLCoPathFailureAction, -- vRouteDnaHgmHgAddrNumberingPlanIndicator, -- sigChanGwRowStatus, -- vsrSvsLCoHoldingPriority, -- vsrSvsFramerStorageType, -- vRouteInterfaceEcanBypassMode, -- vsrSvsFramerMvpDebugComponentName, -- vsrSvsLCoEnd, -- vRouteAcctComponentName, -- vsrSvsFramerAdminState, -- vRouteAcctAccountClass, -- vsrSvsFramerCurrentRate, -- vRouteAcctAccountingOptions, -- vsrSvsFramerNEncodingValue, -- vRouteVoiceNetworkingCallServer, -- vsrSvsFramerFrmToNetworkValue, -- vsrSvsFramerFaxIdleCells, -- vsrSvsRowStatus, -- vsrSvsLCoPathType, -- vsrSvsFramerVfpDebugComponentName, -- sigChanICmapTempFailureCause, -- vsrActiveTptChannels, -- vsrPathAttributesNotMetCalls, -- vsrSvsFramerFrmFromNetworkValue, -- vsrPeakActiveDataChannels, -- sigChanBchCalledDirectoryNumber, -- vsrSvsFramerFrmLostInNetwork, -- vsrSvsLCoStorageType, -- vsrSvsCalledNumber, -- vsrSvsFramerNegotiatedTandemPassThrough, -- vRouteCommentText, -- vRouteInterfaceIngressAudioGain, -- vsrSvsLCoPktsFromNetwork, -- vRouteInterfaceEchoReturnLoss, -- vsrSvsFramerNegotiatedFisG711G726, -- vRouteInterfaceComponentName, -- vsrSvsLCoRequiredRxBandwidth, -- vRouteAcctAccountCollection, -- sigChanNcasDirection, -- vRouteSubroutesRowStatus, -- vRouteStorageType, -- vsrSvsLCoBytesFromNetwork, -- vRouteDnaHgmStorageType, -- vRouteInterfaceEgressAudioGain, -- vsrSvsDebugStorageType, -- vsrSvsLCoRequiredCustomerParameter, -- vRouteSubroutesValue, -- vRouteTotalCallsFromSubnet, -- vsrSvsFramerMvpDebugStorageType, -- vRouteCallsClearedNoChannel, -- vsrTotalFailedCallsFromIf, -- sigChanBchTimeSlot, -- vRouteDebugComponentName, -- vsrSvsFramerMvpDebugRowStatus, -- vsrComponentName, -- vsrSvsFramerAudioCells, -- sigChanICmapIncompatDestCause, -- sigChanICmapChanOrCircNotAvailCause, -- vRouteMinimumDigitsToRoute, -- vsrSignallingChannel, -- vRouteIfAdminStatus, -- sigChanBchRowStatus, -- vRouteInterfaceRowStatus, -- sigChanCommentText, -- vRouteCustomerIdentifier, -- vsrSvsFramerVfpDebugRowStatus, -- vsrSvsStatus, -- sigChanGwRequiredConversions, -- sigChanSubroutesRowStatus, -- vRouteAcctServiceExchange, -- vsrActiveChannels, -- vsrSvsLCoSetupPriority, -- sigChanNcasCallReference, -- vsrSvsIfIndex, -- vsrSvsFramerPcmCaptureComponentName, -- vRouteDnaHgmAvailableChannels, -- sigChanSubroutesValue, -- vsrPeakActiveFaxRelayChannels, -- sigChanDefaultNpiTon, -- vsrSnmpOperStatus, -- vsrIfIndex, -- sigChanAdminState, -- vRouteDnaStorageType, -- vsrSvsLCoRetryCount, -- sigChanIfAdminStatus, -- vsrSvsLCoEmissionPriority, -- vsrSvsFramerComponentName, -- vsrSvsCallingNumber, -- sigChanCustomerIdentifier, -- vsrPeakActiveTptChannels, -- vsrSvsFramerNegotiatedV17AsG711G726, -- vRouteDnaHgmHgAddrStorageType, -- vRouteInterfaceTandemPassThrough, -- vRouteCallsRejected, -- vsrSvsLCoDiscardPriority, -- vsrActiveFaxRelayChannels, -- vsrActiveVoiceChannels, -- sigChanNcasStorageType, -- vRouteDegradedSubroutesValue, -- sigChanICmapRowStatus, -- vRouteDebugRowStatus, -- vsrSvsLCoBumpPreference, -- sigChanGwStorageType, -- vsrRowStatus, -- sigChanICmapSwitchCongestCause, -- vRouteInterfaceComfortNoiseCap, -- sigChanICmapResourceUnavailCause, -- vsrSvsLCoPktsToNetwork, -- sigChanBchStatus, -- vsrDebugRowStatus, -- sigChanOctothorpeEod, -- vsrUsageState, -- vsrSvsLCoCostMetric, -- vsrPathSetupTimeOutCalls, -- vsrSvsFramerNRatesValue, -- vRouteDnaHgmUsageDeltaUpdateThreshold, -- vsrSvsLCoRequiredTxBandwidth, -- vRouteAdminState, -- vsrOperationalState, -- vsrDebugStorageType, -- vsrSvsFramerPcmCaptureRowStatus, -- vsrSvsStorageType, -- vRouteDnaHgmAvailabilityDelta, -- vRouteDnaRowStatus, -- vRouteCallsClearedOutOfService, -- vsrSvsLCoPermittedTrunkTypes, -- vsrSvsOperationalState, -- sigChanDegradedSubroutesValue, -- vRouteComponentName, -- vsrSvsFramerFaxRelayCells, -- vRouteDnaHgmComponentName, -- vsrSvsDebugComponentName, -- vsrSvsAdminState, -- vsrSvsFramerTotalCells, -- vsrSvsFramerRowStatus, -- vsrActiveModemChannels, -- sigChanNcasDuration, -- vsrPeakActiveChannels, -- vsrSvsIfAdminStatus, -- vsrSvsUsageState, -- sigChanComponentName, -- vsrCallsRejectedByFarEnd, -- vsrSvsFramerUsageState, -- vRouteInterfaceEchoTailDelay, -- sigChanUsageState, -- vsrSvsLCoDelayMetric, -- vRouteAcctDigitsSuppressed, -- vRouteInterfaceSpeechHangoverTime, -- vsrSvsDebugRowStatus, -- vsrSvsFramerInterfaceName, -- vRouteTypeOfRoute, -- sigChanICmapReqChanOrCircNotAvailCause, -- vsrSvsLCoComponentName, -- vRoutePrivateNetworkIdentifer, -- vRouteHuntingAlgorithm, -- vsrSvsFramerOperationalState, -- vsrSvsFramerFrmDumped, -- vRouteSnmpOperStatus, -- vsrSvsLCoOverrideRemoteName, -- vRouteIfIndex, -- vsrSvsProfileNumber, -- vRouteDiallingPlan1, -- vsrSvsFramerOpTptStatus, -- vRouteOverrideDirectoryNumber, -- vsrSvsFramerLrcErrors, -- vRouteAcctStorageType, -- sigChanBchStorageType, -- vsrSvsFramerNegotiatedSilenceSuppression, -- vsrPeakActiveVoiceChannels, -- vsrSvsLCoPathValue, -- vRouteDiallingPlan0, -- vRouteDnaComponentName, -- vsrSvsLCoState, -- vsrSvsClearCauseCode, -- vRouteDnaHgmHgAddrComponentName, -- sigChanSnmpOperStatus, -- vRouteRowStatus, -- vsrSvsTotalCallSeconds, -- vsrSvsTotalCalls, -- vRouteDnaHgmRowStatus, -- vsrSvsCallType, -- vsrSvsLCoRoundTripDelay, -- sigChanIfIndex, -- vRouteDnaHgmMaxAvailableChannels, -- vsrSvsLCoRequiredTrafficType, -- sigChanICmapServNotAllowedCause, -- sigChanNcasComponentName, -- vRouteUsageState, -- vsrCallsRejectedLocally, -- vRouteInterfaceModemFaxSpeechDiscrim, -- sigChanGwComponentName, -- sigChanBchComponentName, -- vRouteInterfaceStorageType, -- vsrSvsLCoRowStatus, -- vsrSvsFramerNegotiatedDtmfRegeneration, -- sigChanICmapEgressLinkOutOfServCause, -- vRouteOperationalState, -- vsrCommentText, -- vsrActiveDataChannels, -- vRouteDnaDataNetworkAddress, -- vsrTotalCallsFromIf, -- vsrPeakActiveModemChannels, -- vRouteDnaHgmHgAddrRowStatus, -- vsrAddressIncompleteCalls, -- sigChanNcasCalledDirectoryNumber, -- vsrSvsFramerSilenceCells, -- vRouteAcctRowStatus, -- vsrSvsLCoPathUpDateTime, -- sigChanRowStatus, -- sigChanICmapStorageType, -- vRouteDebugStorageType, -- vRouteDnaHgmHgAddrDataNetworkAddress, -- sigChanGwGatewayCapValue, -- vsrStorageType, -- vsrSvsComponentName, -- vsrSvsLCoReasonForNoRoute, -- vsrSvsFramerFrmUnderRuns, -- sigChanForceNpiTon, -- vsrAddressResolutionFailedCalls, -- sigChanStorageType, -- vsrSvsFramerOpCurrentEncoding, -- vsrSvsLCoBytesToNetwork, -- vsrDebugComponentName } -- STATUS mandatory -- DESCRIPTION -- "A list of all current accessible leaf objects." voiceNetworkingGroup OBJECT IDENTIFIER ::= { voiceNetworkingMIB 1 } voiceNetworkingGroupBE OBJECT IDENTIFIER ::= { voiceNetworkingGroup 5 } voiceNetworkingGroupBE01 OBJECT IDENTIFIER ::= { voiceNetworkingGroupBE 2 } voiceNetworkingGroupBE01A OBJECT IDENTIFIER ::= { voiceNetworkingGroupBE01 2 } -- Agent-Capabilities Statement: -- PRODUCT-RELEASE "Passport Release 7.0 VoiceNetworking." -- STATUS mandatory -- DESCRIPTION "VoiceNetworking MIB: MIB Version BE01A, -- Software Version BG00S4C." -- SUPPORTS Nortel-Magellan-Passport-VoiceNetworkingMIB -- INCLUDES { voiceNetworkingGroupBE01A } voiceNetworkingCapabilities OBJECT IDENTIFIER ::= { voiceNetworkingMIB 3 } voiceNetworkingCapabilitiesBE OBJECT IDENTIFIER ::= { voiceNetworkingCapabilities 5 } voiceNetworkingCapabilitiesBE01 OBJECT IDENTIFIER ::= { voiceNetworkingCapabilitiesBE 2 } voiceNetworkingCapabilitiesBE01A OBJECT IDENTIFIER ::= { voiceNetworkingCapabilitiesBE01 2 } END