chasModuleLedStatus - Chassis Module Led Status - CHASSIS-MIB

MIBs list

chasModuleLedStatus

Chassis Module Led Status
1.3.6.1.4.1.800.2.1.2.1.1.15

The LED state for this module. The exact definition of the values are implimentation dependent. For example, a power supply module may not have any LEDs present, while a network interface element might have 28 LEDs and a Controller might have 6 LEDs. NOTE: due to European regulation, the LEDs will NEVER be illuminated RED! They in fact will be either green OR amber. This will be reflected in the MIB as either GRN=1/RED=0 or GRN=1/RED=1. Of course, if both are off then the LED is not illuminated. The current bit definitions for the defined modules are: mpm 0 - OK1 RED (0 off, 1 on) 1 - OK2 RED (0 off, 1 on) 2 - PS1 RED (0 off, 1 on) 3 - PS2 RED (0 off, 1 on) 4 - OK1 GRN (0 off, 1 on) 5 - OK2 GRN (0 off, 1 on) 6 - PS1 GRN (0 off, 1 on) 7 - PS2 GRN (0 off, 1 on) 8 - PRI MPM GRN (0 on, 1 off) 9 - SEC MPM GRN (0 on, 1 off) 10 - TEMP ALARM AMBER (0 on, 1 off) 11-21 - undefined 22 - HRE PRESENT (1 yes, 0 no) 23 - BUS SPEED (1 960, 0 640) 24-31 - reserved pizza 0 - OK1 RED (0 off, 1 on) 1 - OK2 RED (0 off, 1 on) 2-3 - unused 4 - OK1 GRN (0 off, 1 on) 5 - OK2 GRN (0 off, 1 on) 6 - HSM1 GRN (0 off, 1 on) 7 - HSM2 GRN (0 off, 1 on) 8-31 - reserved eni8 0 - OK1 RED (0 off, 1 on) 1 - OK2 RED (0 off, 1 on) 2 - undefined 3 - undefined 4 - OK1 GRN (0 off, 1 on) 5 - OK2 GRN (0 off, 1 on) 6 - undefined 7 - undefined 8-15 - reserved 16 - STA1 GRN 17 - STA2 GRN 18 - STA3 GRN 19 - STA4 GRN 20 - STA5 GRN 21 - STA6 GRN 22 - STA7 GRN 23 - STA8 GRN mesm8 0 - OK1 RED (0 off, 1 on) 1 - OK2 RED (0 off, 1 on) 2 - undefined 3 - undefined 4 - OK1 GRN (0 off, 1 on) 5 - OK2 GRN (0 off, 1 on) 6 - undefined 7 - undefined 8 - 1 = Full Duplex Port 1 9 - 1 = Full Duplex Port 2 10 - 1 = Full Duplex Port 3 11 - 1 = Full Duplex Port 4 12 - 1 = Full Duplex Port 5 13 - 1 = Full Duplex Port 6 14 - 1 = Full Duplex Port 7 15 - 1 = Full Duplex Port 8 16 - 1 = STA1 GRN 17 - 1 = STA2 GRN 18 - 1 = STA3 GRN 19 - 1 = STA4 GRN 20 - 1 = STA5 GRN 21 - 1 = STA6 GRN 22 - 1 = STA7 GRN 23 - 1 = STA8 GRN mesm12 0 - OK1 RED (0 off, 1 on) 1 - OK2 RED (0 off, 1 on) 2 - undefined 3 - undefined 4 - OK1 GRN (0 off, 1 on) 5 - OK2 GRN (0 off, 1 on) 6 - undefined 7 - undefined 8 - 1 = STA1 GRN 9 - 1 = STA2 GRN 10 - 1 = STA3 GRN 11 - 1 = STA4 GRN 12 - 1 = STA5 GRN 13 - 1 = STA6 GRN 14 - 1 = STA7 GRN 15 - 1 = STA8 GRN 16 - 1 = STA9 GRN 17 - 1 = STA10 GRN 18 - 1 = STA11 GRN 19 - 1 = STA12 GRN 20-23 - reserved mesm16 0 - OK1 RED (0 off, 1 on) 1 - OK2 RED (0 off, 1 on) 2 - undefined 3 - undefined 4 - OK1 GRN (0 off, 1 on) 5 - OK2 GRN (0 off, 1 on) 6 - undefined 7 - undefined 8 - 1 = STA1 GRN 9 - 1 = STA2 GRN 10 - 1 = STA3 GRN 11 - 1 = STA4 GRN 12 - 1 = STA5 GRN 13 - 1 = STA6 GRN 14 - 1 = STA7 GRN 15 - 1 = STA8 GRN 16 - 1 = STA9 GRN 17 - 1 = STA10 GRN 18 - 1 = STA11 GRN 19 - 1 = STA12 GRN 20 - 1 = STA13 GRN 21 - 1 = STA14 GRN 22 - 1 = STA15 GRN 23 - 1 = STA16 GRN eni12 0 - OK1 RED (0 off, 1 on) 1 - OK2 RED (0 off, 1 on) 2 - undefined 3 - undefined 4 - OK1 GRN (0 off, 1 on) 5 - OK2 GRN (0 off, 1 on) 6 - undefined 7 - undefined 8 - STA1 GRN (1 on, 0 off) 9 - STA2 GRN (1 on, 0 off) 10 - STA3 GRN (1 on, 0 off) 11 - STA4 GRN (1 on, 0 off) 12 - STA5 GRN (1 on, 0 off) 13 - STA6 GRN (1 on, 0 off) 14 - STA7 GRN (1 on, 0 off) 15 - STA8 GRN (1 on, 0 off) 16 - STA9 GRN (1 on, 0 off) 17 - STA10 GRN (1 on, 0 off) 18 - STA11 GRN (1 on, 0 off) 19 - STA12 GRN (1 on, 0 off) 20-31 - reserved eni16 0 - OK1 RED (0 off, 1 on) 1 - OK2 RED (0 off, 1 on) 2 - undefined 3 - undefined 4 - OK1 GRN (0 off, 1 on) 5 - OK2 GRN (0 off, 1 on) 6-7 - undefined 8 - ENB1 (1 - yes, 0 - no) 9 - ENB2 (1 - yes, 0 - no) 10 - ENB3 (1 - yes, 0 - no) 11 - ENB4 (1 - yes, 0 - no) 12 - ENB5 (1 - yes, 0 - no) 13 - ENB6 (1 - yes, 0 - no) 14 - ENB7 (1 - yes, 0 - no) 15 - ENB8 (1 - yes, 0 - no) 16 - ENB9 (1 - yes, 0 - no) 17 - ENB10 (1 - yes, 0 - no) 18 - ENB11 (1 - yes, 0 - no) 19 - ENB12 (1 - yes, 0 - no) 20 - ENB13 (1 - yes, 0 - no) 21 - ENB14 (1 - yes, 0 - no) 22 - ENB15 (1 - yes, 0 - no) 23 - ENB16 (1 - yes, 0 - no) 24-31 - reserved tni 0-11 - reserved 12 - Status_1 LED (0 = ON) 13 - Status_2 LED (0 = ON) 14 - Status_3 LED (0 = ON) 15 - Status_4 LED (0 = ON) 16 - Status_5 LED (0 = ON) 17 - Status_6 LED (0 = ON) 18 - Beacon_1 LED (0 = ON) 19 - Beacon_2 LED (0 = ON) 20 - Beacon_3 LED (0 = ON) 21 - Beacon_4 LED (0 = ON) 22 - Beacon_5 LED (0 = ON) 23 - Beacon_6 LED (0 = ON) 24-31 - undefined hsm 0 - OK1 RED (0 off, 1 on) 1 - OK2 RED (0 off, 1 on) 2 - undefined 3 - undefined 4 - OK1 GRN (0 off, 1 on) 5 - OK2 GRN (0 off, 1 on) 6-31 - reserved fddi 0-3 - reserved 4 - LINK (0 flash (DISABLED), 1 on (ENABLED)) 5 - WRAP B LED (0 on, 1 off) 6 - WRAP A LED (0 on, 1 off) 7 - THRU LED (0 on, 1 off) 8-31 - reserved cddi 0-7 - reserved 8-9 - Link LED A 00 - off, x1 - on, 10 - flash 10-11 - Link LED B 00 - off, x1 - on, 10 - flash 12-13 - Link LED C 00 - off, x1 - on, 10 - flash 14-15 - Link LED D 00 - off, x1 - on, 10 - flash 16-31 - reserved for example, the value 0xD8xx indicates Link LED A - off Link LED B - flashing Link LED C - on Link LED D - on atm 0-3 - reserved 4 - FAR END (0 on, 1 off) 5 - YELLOW ALARM LED (0 on, 1 off) 6 - RED ALARM LED (0 on, 1 off) 7 - CELL ERROR LED (0 on, 1 off) 8 - Link (1 Green, 0 off) 9-31 - reserved fesm 0-6 - reserved 6 - STA On (1 on, 0 off) 7 - STA Flash (1 Flash, 0 solid) (Not used) 8 - LINK1 On (1 on, 0 off) 9 - LINK1 Flash (1 Flash, 0 solid) (Not used) -- The following are for Copper Only 10 - LINK2 On (1 on, 0 off) 11 - LINK2 Flash (1 Flash, 0 solid) (Not used) 12 - LINK3 On (1 on, 0 off) 13 - LINK3 Flash (1 Flash, 0 solid) (Not used) 14 - LINK4 On (1 on, 0 off) 15 - LINK4 Flash (1 Flash, 0 solid) (Not used) 16 - Full Duplex (1) Half Duplex (0) 17-31 - reserved wsm 0-7 - reserved - off blink slow blink on 8-9 - STA1 00 01 10 11 10-11 - STA2 00 01 10 11 12-13 - STA3 00 01 10 11 14-15 - STA4 00 01 10 11 16-17 - STA5 00 01 10 11 18-19 - STA6 00 01 10 11 20-21 - STA7 00 01 10 11 22-23 - STA8 00 01 10 11 24-31 - reserved csm 0 - OK1 RED (0 off, 1 on) 1 - OK2 RED (0 off, 1 on) 2 - undefined 3 - undefined 4 - OK1 GRN (0 off, 1 on) 5 - OK2 GRN (0 off, 1 on) 6 - undefined 7 - undefined 8-23 - port = bit - 7; - 0 - port down, LINK OFF, RED Amber - 1 - port up, LINK Green, RED OFF 24-31 - unused cabcm 0-7 - reserved off blink on 8-9 LINK1 00 01 11 10-31 - reserved fcsm 0 - OK1 RED (0 off, 1 on) 1 - OK2 RED (0 off, 1 on) 2 - undefined 3 - undefined 4 - OK1 GRN (0 off, 1 on) 5 - OK2 GRN (0 off, 1 on) 6-31 - unused atmce2s2t, atmce2s2e 0-7 - reserved 8 - LINK1 (1 on, 0 off) 9 - ERR1 (1 on, 0 off) 10 - LINK2 (1 on, 0 off) 11 - ERR2 (1 on, 0 off) - off blink on 12-13 - STA1 00 01 11 14-15 - STA2 00 01 11 16-31 - reserved csmu 0 - OK1 RED (0 off, 1 on) 1 - OK2 RED (0 off, 1 on) 2 - undefined 3 - undefined 4 - OK1 GRN (0 off, 1 on) 5 - OK2 GRN (0 off, 1 on) 6 - undefined 7 - undefined cabds3: cabe3: 0-7 - reserved off yellow green 8-9 LINK1 00 01 11 10-11 LINK2 00 01 11 12-31 - reserved cabds1: cabe1: cabcet1: cabcee1: 0-7 - reserved off yellow green 8-9 LINK1 00 01 11 10-11 LINK2 00 01 11 12-13 LINK3 00 01 11 14-15 LINK4 00 01 11 16-31 - reserved cab4imat1: cab4imae1: cab8imat1: cab8imae1: 0-7 - reserved off yellow green 8-9 LINK1 00 01 11 10-11 LINK2 00 01 11 12-13 LINK3 00 01 11 14-15 LINK4 00 01 11 16-17 LINK5 00 01 11 18-19 LINK6 00 01 11 20-21 LINK7 00 01 11 22-23 LINK8 00 01 11 24-31 - reserved Other modules will be defined later.

Back to CHASSIS-MIB MIB page.

IPHost Network monitor uses SNMP for monitoring health and availability of devices and applications in your network. You can send a SNMP Set to any remote device to monitor a specific SNMP object (CPU, Memory, Disk, Server Temperature, RAID failures, IO statistics, connection counts, error and much more).

MIBs list