Cisco ATM Trunk Cid Voice Codec

1.3.6.1.4.1.9.9.351.1.1.1.1.8

This object specifies the CODEC type used for the AAL2 trunking connection. The following table lists the CODEC types specified in each profile table by ITU I.366.2 standard. ---------------------------------------------------- Profile Profile Packet type Number CODEC SID time(ms) ---------------------------------------------------- ITU 1 G.711u No SID 5 G.711a No SID 5 ---------------------------------------------------- ITU 2 G.711u SIDG 5 G.711a SIDG 5 ---------------------------------------------------- ITU 3 G.711u SIDG 5 G.711a SIDG 5 G726-40 SIDG 5 G726-32 SIDG 5 G726-24 SIDG 5 G726-16 SIDG 5 ---------------------------------------------------- ITU 7 G.711u SIDG 5 G.711a SIDG 5 G.729ab SID729 10 G.729a No SID 10 ---------------------------------------------------- ITU 8 G.711u No SID 5 G.711a No SID 5 G.726-32 No SID 5 G.729ab SID729 10 G.729a SID729 10 ---------------------------------------------------- Custom 100 G.711u SIDG 5 G.711a SIDG 5 G.726-32 SIGD 10 ---------------------------------------------------- Custom 101 G.711u No SID 5 G.711a No SID 5 G.726-32 No SID 10 G.729ab SID729 10 G.729a No SID 10 ---------------------------------------------------- Custom 110 G.711u SIDG 5 G.711a SIDG 5 G.726-32 SIDG 10 G.729ab SID729 30 G.729a No SID 30 ---------------------------------------------------- Custom 200 clearChan No SID 5 ---------------------------------------------------- This object can only be set to the CODECs defined by the profile specified by catmtCidProfileType and catmtCidProfileNumber. This object is applicable when catmtCidNx64Enable is is set to 'false'. It is used for voice trunking applications only. This object is mandatory when adding a voice trunking CID entry. ::= { catmtCidEntry 8 } SYNTAX CvcCoderTypeRate MAX-ACCESS read-create STATUS current DESCRIPTION This object specifies the CODEC type to be used for Voice Band Data (VBD) upspeed. Upspeed is to change the transmission rate of a voice interface to a higher rate of CODEC type for fax/modem transportation. This object is applicable when catmtCidNx64Enable is is set to 'false'. It is used for voice trunking applications only. This object is mandatory when adding a voice trunking CID entry. ::= { catmtCidEntry 9 } SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION This object specifies whether a CID entry is in the Nx64 packet stream mode. When this object is set to 'false', the CID connection is for voice trunking applications only; when it is set to 'true', the CID connection is for data trunking using Nx64 packet stream (N>=1). This object can not be modified. DEFVAL { false } ::= { catmtCidEntry 10 } SYNTAX Integer32 (1..65535) MAX-ACCESS read-create STATUS current DESCRIPTION This object specifies the Nx64 data profile for an AAL2 data trunking connection. The value of this object is a valid index of the cdapNx64ProfileTable in the CISCO-DATA-AALX-PROFILE-MIB. This object is only applicable when catmtCidNx64Enable is set to 'true'. DEFVAL { 1 } ::= { catmtCidEntry 11 } SYNTAX BITS { pvcAdminDown(0), pvcFailure(1), extAIS(2), extRAI(3), aal2ConnAIS(4), aal2ConnRDI(5), lineAlarm(6) } MAX-ACCESS read-only STATUS current DESCRIPTION This object is used to indicate the state of the CID. All bits setting to 0 which means status 'okay'. REFERENCE ITU-T recommendation I.366.2 Annex N.