Cisco 2900 Bandwidth Usage Peak

1.3.6.1.4.1.9.9.87.1.5.6.1.3

The maximum bandwidth usage of any measurement interval within this recording interval. This value is an estimate of the highest amount of traffic flowing through the switch during this recording interval. It is calculated as follows: Octets*8 + Frames*(96 + 64) --------------------------- Measurement Interval * 1,000,000 * 2 Where: Measurement Interval is the amount of time over which the Octets and Frames were collected, in seconds. Measurement Interval is always one second in c2900's implementation. Octets is the total number of octets transmitted or received by all network interfaces, excluding framing data but including FCS. This includes octets in frames which were partially transmitted or received (due to collisions, for example). Frames is the total number of frames transmitted or received by all network interfaces, including frames with errors. The number of frames is multiplied by 96 plus 64 in order to estimate the delay between each frame for Ethernet's IPG and preamble/SFD. The '2' in the divisor makes this a forwarding bandwidth counter. A frame received on one interface is typically forwarded out another interface. In order to avoid double- counting this frame's bandwidth, once on the receiving interface and once on the transmitting interface, the total bandwidth is divided by two. Since multicast and broadcast frames can be sent to multiple ports, the above is at best a lower bound.