cdxCmtsCmStatusValue - Cisco DOCSIS Cmts Cable Modem Status Value - CISCO-DOCS-EXT-MIB

MIBs list

With IPHost Network Monitor you can run simple snmp requests against a Cisco device in your network.

cdxCmtsCmStatusValue

Cisco DOCSIS Cmts Cable Modem Status Value
1.3.6.1.4.1.9.9.116.1.3.2.1.1

Current Cable Modem connectivity state. The object extends states in docsIfCmtsCmStatusValue in more details. The enumerations are: offline(1) : modem considered offline. others(2) : states is in docsIfCmtsCmStatusValue. initRangingRcvd(3) : modem sent initial ranging. initDhcpReqRcvd(4) : dhcp request received. onlineNetAccessDisabled(5): modem registered, but network access for the CM is disabled. onlineKekAssigned(6) : modem registered, BPI enabled and KEK assigned. onlineTekAssigned(7) : modem registered, BPI enabled and TEK assigned. rejectBadMic(8) : modem did attempt to register but registration was refused due to bad mic. rejectBadCos(9) : modem did attempt to register but registration was refused due to bad COS. kekRejected(10) : KEK modem key assignment rejected. tekRejected(11) : TEK modem key assignment rejected. online(12) : modem registered, enabled for data. initTftpPacketRcvd(13) : tftp packet received and option file transfer started. initTodRquestRcvd(14) : Time of the Day (TOD) request received. reset(15) : modem is resetting. rangingInProgress(16) : initial ranging is in progress. -- deprecated value -- rangingCompleted(17) : initial ranging is completed. dhcpGotIpAddr(18) : modem has got an IP address from the DHCP server. rejStaleConfig(19) : modem did attempt to register but registration was refused due to stale Config. rejIpSpoof(20) : modem did attempt to register but registration was refused due to IP Spoof. rejClassFail(21) : modem did attempt to register but registration was refused due to Class failure. rejRegNack(22) : modem did attempt to register but no acknowledgement was received. bpiKekExpired(23) : KEK modem key assignment expired. bpiTekExpired(24) : TEK modem key assignment expired. shutdown(25) : modem is in shutdown state. channelChgInitRangingRcvd(26) : modem sent initial ranging during channel change. channelChgRangingInProgress(27) : initial ranging is in progress during channel change. This cdxCmtsCmStatusValue could return initRangingRcvd(3) or rangingInProgress(16) when the docsIfCmtsCmStatusValue is ranging(2). This cdxCmtsCmStatusValue will return others(2) when the docsIfCmtsCmStatusValue states is either rangingAborted(3), rangingComplete(4), and ipComplete(5). This cdxCmtsCmStatusValue could return online(12), or onlineNetAccessDisabled(5) for CM with BPI disabled, or onlineNetAccessDisabled(5) or onlineTekAssigned(7) for CM with BPI enabled, when the docsIfCmtsCmStatusValue is registrationComplete(6). This cdxCmtsCmStatusValue could return either rejectBadMic(8), rejectBadCos(9) rejStaleConfig(19) or rejRegNack(22) when the docsIfCmtsCmStatusValue is accessDenied(7) for possible reasons of cable modem registration abort. This cdxCmtsCmStatusValue could return either onlineKekAssigned(6), kekRejected(10), tekRejected(11), or online(12) for the CM with BPI enabled when the docsIfCmtsCmStatusValue is registeredBPIInitializing(9). The state rejectBadCos(9) is not applicable for DOCSIS1.1 modems. The CMTS only reports states it is able to detect.

Back to CISCO-DOCS-EXT-MIB MIB page.

IPHost Network monitor allows you to monitor cdxCmtsCmStatusValue on Cisco device via the SNMP protocol. Download IPHost Network Monitor (500 monitors for 30 days, 50 monitors free forever) to start monitoring Cisco optical switches right now.

Easy monitoring of cdxCmtsCmStatusValue with IPHost tools

MIBs list