csrst Alias Index

1.3.6.1.4.1.9.9.441.1.2.31.1.1

An index in sequential order that indicates an alias pattern configured on this SRST router. ::= { csrstAliasEntry 1 } SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION A unique sequence number that indicates a particular alias pattern configured on this SRST router. ::= { csrstAliasEntry 2 } SYNTAX SnmpAdminString (SIZE (0..64)) MAX-ACCESS read-only STATUS current DESCRIPTION This object indicates the pattern to match the incoming telephone number. It may include wildcards. ::= { csrstAliasEntry 3 } SYNTAX SnmpAdminString (SIZE (0..64)) MAX-ACCESS read-only STATUS current DESCRIPTION This object indicates the alternate tele- phone number to route incoming calls to match the number pattern. This has to be a valid extension for an IP phone actively registered on the SRST router. ::= { csrstAliasEntry 4 } SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION This object indicates the preference value of the associated dial-peer. A value of 0 has the highest preference. ::= { csrstAliasEntry 5 } SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION This object specifies that if hunt stop is enabled, after the caller tried the alternate number according to the alias pattern, it will stop call hunting. If hunt stop is disabled, it will rollover to another directory number if available. ::= { csrstAliasEntry 6 } -- -- Access Code Table -- -- -- This table displays information about each configured access- -- code on the Cisco SRST router. -- The access-code configures trunk access codes for each type of -- line - BRI, E&M, FXO, and PRI. The access-code also creates -- temporary POTS voice dial peers for all the selected types of -- voice ports. This allows the Cisco IP phone access to trunk -- lines during Cisco CallManager fallback when Cisco SRST is -- enabled. -- -- SYNTAX SEQUENCE OF CsrstAccessCodeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION A list of access-code to trunk lines configured on this SRST router. ::= { csrstConf 32 } SYNTAX CsrstAccessCodeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION Information about a configured access-code to trunk lines. There is an entry in this table for each access configured on this device.