agentCosQueueIntfShapingRate ( agent Cos Queue Intf Shaping Rate ) from NETGEAR-QOS-COS-MIB

MIBs list

With IPHost Network Monitor you can run simple snmp requests against a NETGEAR device in your network.

agentCosQueueIntfShapingRate

agent Cos Queue Intf Shaping Rate
1.3.6.1.4.1.4526.10.3.3.2.3.1.2

Maximum bandwidth allowed for this interface as a whole, typically used to shape the outbound transmission rate. The value is specified in terms of percentage of overall link speed for the port in 5% increments. A value of 0 means there is no maximum bandwidth limit in effect and that the interface is allowed to transmit up to its maximum line rate (i.e., work conserving method). The default value is 0. When set to a non-zero value, the interface is restricted to using at most the bandwidth specified in this object for the outbound transmission rate (i.e., non-work-conserving method). This bandwidth value is independent of any per-queue maximum bandwidth value(s) in effect for the interface, as specified in the agentCosQueueMaxBandwidth ohject, and should be considered as a second-level transmission rate control mechanism that regulates the output of the entire interface regardless of which queues originate the outbound traffic.

Back to NETGEAR-QOS-COS-MIB MIB page.

IPHost Network monitor allows you to monitor agentCosQueueIntfShapingRate on NETGEAR device via the SNMP protocol. Download IPHost Network Monitor (500 monitors for 30 days, 50 monitors free forever) to start monitoring NETGEAR network storage devices right now.

Easy monitoring of agentCosQueueIntfShapingRate with IPHost tools

MIBs list