rfc1304 Download

sipL3Entry

This list contains SIP L3 parameters and state variables.

sipL3Index

The value of this object identifies the SIP port interface for which this entry contains management information. The value of this object for a particular interface has the same value as the ifIndex object, defined in RFC 1156 and RFC 1213, for the same ...

sipL3ReceivedIndividualDAs

The total number of individually addressed SIP Level 3 PDUs received from the remote system across the SNI. The total includes only unerrored L3PDUs.

sipL3ReceivedGAs

The total number of group addressed SIP Level 3 PDUs received from the remote system across the SNI. The total includes only unerrored L3PDUs.

sipL3UnrecognizedIndividualDAs

The number of SIP Level 3 PDUs received from the remote system with invalid or unknown individual destination addresses (Destination Address Screening violations are not included). See SMDS Subscription MIB module.

sipL3UnrecognizedGAs

The number of SIP Level 3 PDUs received from the remote system with invalid or unknown group addresses. (Destination Address Screening violations are not included). See SMDS Subscription MIB module.

sipL3SentIndividualDAs

The number of individually addressed SIP Level 3 PDUs that have been sent by this system across the SNI.

sipL3SentGAs

The number of group addressed SIP L3PDUs that have been sent by this system across the SNI.

sipL3Errors

The total number of SIP Level 3 PDUs received from the remote system that were discovered to have errors (including protocol processing and bit errors but excluding addressing-related errors) and were discarded. Includes both group addressed L3PDUs and L ...

sipL3InvalidSMDSAddressTypes

The number of SIP Level 3 PDUs received from the remote system that had the Source or Destination Address_Type subfields, (the four most significant bits of the 64 bit address field), not equal to the value 1100 or 1110. Also, an error is considered to h ...

sipL3VersionSupport

A value which indicates the version(s) of SIP that this interface supports. The value is a sum. This sum initially takes the value zero. For each version, V, that this interface supports, 2 raised to (V - 1) is added to the sum. For example, a port supp ...

sipL2Table

This table contains SIP L2PDU parameters and state variables, one entry per SIP port.

sipL2Entry

This list contains SIP L2 parameters and state variables.

sipL2Index

The value of this object identifies the SIP port interface for which this entry contains management information. The value of this object for a particular interface has the same value as the ifIndex object, defined in RFC 1156 and RFC 1213, for the same ...

sipL2ReceivedCounts

The number of SIP Level 2 PDUs received from the remote system across the SNI. The total includes only unerrored L2PDUs.

sipL2SentCounts

The number of SIP Level 2 PDUs that have been sent by this system across the SNI.

sipL2HcsOrCRCErrors

The number of received SIP Level 2 PDUs that were discovered to have either a Header Check Sequence error or a Payload CRC violation.

sipL2PayloadLengthErrors

The number of received SIP Level 2 PDUs that had Payload Length errors that fall in the following specifications: - SSM L2_PDU payload length field value less - than 28 octets or greater than 44 octets, - BOM or COM L2_PDU payload length field not - equal ...

sipL2SequenceNumberErrors

The number of received SIP Level 2 PDUs that had a sequence number within the L2PDU not equal to the expected sequence number of the SMDS SS receive process.

sipL2MidCurrentlyActiveErrors

The number of received SIP Level 2 PDUs that are BOMs for which an active receive process is already started.

sipL2BomOrSSMsMIDErrors

The number of received SIP Level 2 PDUs that are SSMs with a MID not equal to zero or are BOMs with MIDs equal to zero.

sipL2EomsMIDErrors

The number of received SIP Level 2 PDUs that are EOMs for which there is no active receive process for the MID (i.e., the receipt of an EOM which does not correspond to a BOM) OR the EOM has a MID equal to zero.

sipDS1PLCPTable

This table contains SIP DS1 PLCP parameters and state variables, one entry per SIP port.

sipDS1PLCPEntry

This list contains SIP DS1 PLCP parameters and state variables.

sipDS1PLCPIndex

The value of this object identifies the SIP port interface for which this entry contains management information. The value of this object for a particular interface has the same value as the ifIndex object, defined in RFC 1156 and RFC 1213, for the same ...

sipDS1PLCPSEFSs

A DS1 Severely Errored Framing Second (SEFS) is a count of one-second intervals containing one or more SEF events. A Severely Errored Framing (SEF) event is declared when an error in the A1 octet and an error in the A2 octet of a framing octet pair (i.e. ...

sipDS1PLCPAlarmState

This variable indicates if there is an alarm present for the DS1 PLCP. The value receivedFarEndAlarm means that the DS1 PLCP has received an incoming Yellow Signal, the value incomingLOF means that the DS1 PLCP has declared a loss of frame (LOF) failure ...

sipDS1PLCPUASs

The counter associated with the number of Unavailable Seconds, as defined by TR-TSV-000773, encountered by the PLCP.

sipDS3PLCPTable

This table contains SIP DS3 PLCP parameters and state variables, one entry per SIP port.

sipDS3PLCPEntry

This list contains SIP DS3 PLCP parameters and state variables.

sipDS3PLCPIndex

The value of this object identifies the SIP port interface for which this entry contains management information. The value of this object for a particular interface has the same value as the ifIndex object, defined in RFC 1156 and RFC 1213, for the same ...

sipDS3PLCPSEFSs

A DS3 Severely Errored Framing Second (SEFS) is a count of one-second intervals containing one or more SEF events. A Severely Errored Framing (SEF) event is declared when an error in the A1 octet and an error in the A2 octet of a framing octet pair (i.e. ...

sipDS3PLCPAlarmState

This variable indicates if there is an alarm present for the DS3 PLCP. The value receivedFarEndAlarm means that the DS3 PLCP has received an incoming Yellow Signal, the value incomingLOF means that the DS3 PLCP has declared a loss of frame (LOF) failure ...

sipDS3PLCPUASs

The counter associated with the number of Unavailable Seconds, as defined by TR-TSV-000773, encountered by the PLCP.

ipOverSMDSTable

The table of addressing information relevant to this entity's IP addresses.

ipOverSMDSEntry

The addressing information for one of this entity's IP addresses.

ipOverSMDSIndex

The value of this object identifies the SIP port interface for which this entry contains management information. The value of this object for a particular interface has the same value as the ifIndex object, defined in RFC 1156 and RFC 1213, for the same ...

ipOverSMDSAddress

The IP address to which this entry's addressing information pertains.

ipOverSMDSHA

The SMDS Individual address of the IP station.

ipOverSMDSLISGA

The SMDS Group Address that has been configured to identify the SMDS Subscriber-Network Interfaces (SNIs) of all members of the Logical IP Subnetwork (LIS) connected to the network supporting SMDS.

ipOverSMDSARPReq

The SMDS address (individual or group) to which ARP Requests are to be sent.

sipL3PDUErrorTable

A table that contains the latest occurrence of the following syntactical SIP L3PDU errors: - Destination Address Field Format Error, The following pertains to the 60 least significant bits of the 64 bit address field. The 60 bits contained in the address ...

sipL3PDUErrorEntry

An entry in the service disagreement table.

sipL3PDUErrorIndex

The value of this object identifies the SIP port interface for which this entry contains management information. The value of this object for a particular interface has the same value as the ifIndex object, defined in RFC 1156 and RFC 1213, for the same ...

sipL3PDUErrorType

The type of error.

sipL3PDUErrorSA

A rejected SMDS source address.

sipL3PDUErrorDA

A rejected SMDS destination address.

sipL3PDUErrorTimeStamp

The timestamp for the service disagreement. The timestamp contains the value of sysUpTime at the latest occurrence of this type of service disagreement. See textual description under sipL3PDUErrorTable for boundary conditions.